https://hyrel3d.com/wiki/api.php?action=feedcontributions&user=Davo&feedformat=atomHyrel3D - User contributions [en]2024-03-29T15:50:56ZUser contributionsMediaWiki 1.30.1https://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7800Published Papers2024-03-28T18:08:45Z<p>Davo: /* Count */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
519 documents as of 28 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://doi.org/10.1002/adma.202401140 Fast and Slow-Twitch Actuation via Twisted Liquid Crystal Elastomer Fibers] presented at the [https://www.grc.org/ Gordon Research Conferences (GRC)]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7799Published Papers2024-03-28T18:08:27Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://doi.org/10.1002/adma.202401140 Fast and Slow-Twitch Actuation via Twisted Liquid Crystal Elastomer Fibers] presented at the [https://www.grc.org/ Gordon Research Conferences (GRC)]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7798Published Papers2024-03-25T15:14:48Z<p>Davo: /* NTM, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7797Published Papers2024-03-25T15:14:38Z<p>Davo: /* FDM/HFF, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7796Published Papers2024-03-25T15:13:59Z<p>Davo: /* NTM, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7795Published Papers2024-03-25T15:13:47Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7794Published Papers2024-03-25T15:12:35Z<p>Davo: /* NTM, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7793Published Papers2024-03-25T15:12:25Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7792Published Papers2024-03-25T15:11:52Z<p>Davo: /* NTM, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7791Published Papers2024-03-25T15:11:41Z<p>Davo: /* NTM, 2022 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7790Published Papers2024-03-25T15:11:04Z<p>Davo: /* Count */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
518 documents as of 25 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7789Published Papers2024-03-25T15:09:44Z<p>Davo: /* NTM, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://utw10945.utweb.utexas.edu/sites/default/files/2023/079%20DevelopmentofMultimaterialAdditiveManufacturingSystemsforEmbeddedElectronic.pdf Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics] by a team from the [https://www.me.psu.edu/ Department of Mechanical Engineering, Pennsylvania State University] and the [https://www.me.uh.edu/ Department of Mechanical Engineering, University of Houston]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7788Published Papers2024-03-25T15:07:01Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616124001310 The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites] by a team from the [ University of Waterloo, Canada]'s [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory] and [https://uwaterloo.ca/bioengineering-biotechnology/ Material Interaction with Biological Systems Laboratory]<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7787Published Papers2024-03-25T15:03:07Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.mdpi.com/2223-7747/13/6/754 Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ Pharmacognosy Department, The National University of Pharmacy (Ukraine)], [https://www.imiamn.org.ua/indexEN.html I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine], [https://ut.ee/en/department-microbiology Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia], and [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia]<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7786Published Papers2024-03-25T14:54:37Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.nature.com/articles/s41467-024-46532-0 3D Printing by Stereolithography Using Thermal Initiators] by a team from the [https://chemistry.huji.ac.il/ Institute of Chemistry, Hebrew University of Jerusalem]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7785Published Papers2024-03-25T14:51:59Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12907/1290704/Liquid-crystal-elastomer-soft-robotic-arm-for-pick-and-place/10.1117/12.3000162.short#_=_ Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light] by a team from [https://www.tue.nl/en/ Technische Universiteit Eindhoven]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7784Published Papers2024-03-25T14:49:17Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c01171 Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics] by a team from [https://cemse.kaust.edu.sa/ SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)] and [https://ee.kfupm.edu.sa/ Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7783Published Papers2024-03-25T14:46:31Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.science.org/doi/full/10.1126/sciadv.adk3250 Three-dimensional Printing of Wood] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7782Published Papers2024-03-25T14:44:37Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7781Published Papers2024-03-25T14:37:16Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c00386 Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity] by a team from [https://lanl.gov Los Alamos National Laboratory]'s [https://organizations.lanl.gov/cels/chemistry/chemical-diagnostics-engineering/ Chemical Diagnostics and Engineering Group] and [https://organizations.lanl.gov/physical-sciences/sigma/fabrication-manufacturing-sciences/ Fabrication Manufacturing Science Group]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7780Published Papers2024-03-25T14:33:59Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7779Published Papers2024-03-25T14:30:31Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7778Published Papers2024-03-25T14:28:43Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives https://www.mdpi.com/1999-4923/16/4/437] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7777Published Papers2024-03-25T14:25:15Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7776Published Papers2024-03-25T14:22:00Z<p>Davo: /* DPE, HME 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=How_do_I...&diff=7775How do I...2024-03-13T14:08:39Z<p>Davo: /* What Maintenance Should I Do? */</p>
<hr />
<div>[[Category:HowTo]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== How do I adjust the settings? ==<br />
<br />
This is pretty easy, once you know the flow.<br />
<br />
# You set the recipes for the parameters (extrusion width, infill patterns/density, print speed, layer thickness, head/bed temperatures, etc.; save the recipes (with descriptive names - don't overwrite the originals), and close the recipe editor.<br />
# You highlight your properly scaled, positioned, rotated stl and select the print, printer, and extruder (filament) recipes to use, and go to Process > Slice with Slic3r.<br />
# You review your gcode to ensure that you got what you were hoping to get; review the layer-by-layer rendering as well as the actual settings for temperature, layer thickness (Z moves and M756 flow settings), etc.<br />
# You load the print head. Default settings from the head are displayed in Repetrel.<br />
# You ensure that the data on the print head reflect your preheat temperature (if any) and proper nozzle diameter (and prime/unprime settings if your custom material requires adjustment) - these settings should be flashed to the head.<br />
# You do any preparation (preheating, bed treatment, priming material, etc).<br />
# You press Print. Upon pressing print, the following happens:<br />
## Head settings are sent from repetrel to the printer.<br />
## Gcode is sent from repetrel to the printer. Since gcode is sent second, this will overwrite any head-based settings if gcode has different values<br />
<br />
<br />
== How do I run a different language? ==<br />
<br />
<span style="color: red;">'''YOU DON'T - IT WILL BREAK REPETREL!'''</span> You can change the language of repetrel, but if you operate the computer on another language the "," and "." will be wrong and nothing will work. Trust me.<br />
<br />
<br />
== How do I set Z-zero on Multiple Heads? ==<br />
<br />
Please watch this video: https://www.youtube.com/watch?v=IQscrgv6uaQ<br />
<br />
If you still have questions, contact Davo.<br />
<br />
== How do I change the home location? ==<br />
<br />
You don't. The X and Y home positions are X0 and Y0, and are determined by sensors. But you can apply an offset. See G54-59 on the [[Gcode]] page.<br />
<br />
Note, on the EHR there is a Z home sensor, which is at Z120. To set Z offsets on the EHR, see M660 on the [[Gcode]] page.<br />
<br />
== How do I change the park location? ==<br />
<br />
Note, if you set park for head 4, then head 2 will be 70mm off. Each position is 35 *mm from the next. *70 mm between first and second slots on ESR/30M.<br />
<br />
1. Load the head you want to set this for in the slot you want to set it for.<br />
<br />
2. Record the absolute X and Y positions:<br />
<br />
[[File:Abs-pos.png|250px]]<br />
<br />
3. Open Settings > Printer:<br />
<br />
[[File:Settings-printer.png|250px]]<br />
<br />
4. Enter the recorded X and Y values:<br />
<br />
[[File:Park-pos.png|250px]]<br />
<br />
5. Click "Flash Motion Settings", then "Apply", then "OK":<br />
<br />
[[File:Flash-apply-ok.png|250px]]<br />
<br />
== How do I change the Baud Rate? ==<br />
<br />
So, on (roughly) version 4.2.4x (aka 42.4x) or later, you can actually set Repetrel AND the printer to use a Baud rate of 115,200 (versus the default 38,400) - but you have to set this on the printer as well as in Repetrel:<br />
<br />
* On the right side of the program , go to Interface > COM<br />
* Select the rate you want to change to (115,200)<br />
* HOLD THE SHIFT KEY and click "Apply"<br />
<br />
You should now be connected at the new rate.<br />
<br />
== How do I change nozzles or clean nozzles? ==<br />
<br />
Carefully:<br />
# Heat to the printing temperature of the material loaded.<br />
# Move the manual lever to the left, retracting material until it is free of the advancement gear, then remove by hand.<br />
# Turn off heat to the head and remove it from the yoke. *Nozzle should be HOT when this step is done; use caution.<br />
# With a 1/4" driver or wrench, remove the nozzle.<br />
# Inspect the nozzle cavity for any stray material; if found, remove with tweezers, solvent, air pressure or other means.<br />
# The old nozzle can be cleaned with a fine drill bit the same size as (or slightly smaller than) the nozzle diameter; some users also soak the nozzle in an appropriate solvent to remove all material.<br />
# With a 1/4" driver or wrench, attach the new nozzle.<br />
# Use normal procedure for heating and loading filament.<br />
<br />
== How do I change nozzle sizes? ==<br />
<br />
There are two places where we consider nozzle size:<br />
<br />
1. On the head, we use the number you have for nozzle diameter to make our flow calculations. See [[Flow Rate]] for details about how we determine how fast to spin the motor so that you get the proper volume per second of deposition. This image is for printing with a 14# (fourteen gauge, or 1.6mm ID) luer needle:<br />
<br />
[[File:H_N_mat_tab.png]]<br />
<br />
2. In the recipe, we use the extrusion width numbers to determine how far apart to place each bead of material. We expect your extrusion width to be 10% wider than your nozzle diameter (to allow for a nice sandbag-shaped cross section). This image is for printing with a 14# (fourteen gauge, or 1.6mm ID) luer needle:<br />
<br />
[[File:H_N_slicer.png]]<br />
<br />
This applies to everything we print, from PLA to Porcelain to PEEK.<br />
<br />
Please note that we do NOT use any other variable relating to nozzle diameter. Not Bridge Flow Ratio. Not Nozzle Diameter. Not Extrusion Multiplier. All of these variables affect the E values in your gcode. Which we then ignore.<br />
<br />
<br />
== How do I convert DXF files to gcode? ==<br />
<br />
1. In Project Composer, open your DXF:<br />
<br />
[[File:H_D_loaddxf.png]]<br />
<br />
2. On the Slicer tab, double click in the text box next to drill-laser, and select the recipe:<br />
<br />
[[File:H_D_dlrecipe.png]]<br />
<br />
3. On the Prams tab, configure the head and settings to use:<br />
<br />
[[File:H_D_prams.png]]<br />
<br />
4. Process > Process DXF, Text, Drill Objects:<br />
<br />
[[File:H_D_process.png]]<br />
<br />
5. Profit!<br />
<br />
== How do I move a Project? ==<br />
<br />
# Zip up the contents of the C:/RepetrelProjects folder<br />
# Move it to a new computer<br />
# Unzip it in the C:/RepetrelProjects folder<br />
<br />
== How do I hand-code a test pattern? ==<br />
<br />
This is not as hard as it seems - provided we start with basic understanding of how the printer operates. This gcode is for printers OTHER THAN the EHR, and for emulsion-based printing WITHOUT opting in to use E values with M229.<br />
<br />
1. Before starting, we always want to do some things explicitly, regardless of what model:<br />
<br />
'''M107''' ; fans/UV ; off<br />
'''M106 C255''' ; fans/UV ; use 0-255 range<br />
'''G53''' ; clear offsets<br />
'''G21''' ; units ; mm<br />
'''G90''' ; coordinates ; absolute<br />
<br />
2. Before moving, we want to drop the bed for safety, and then home the X/Y:<br><br />
<span style="color: maroon;">Note: EHR users use different code here.<br />
<br />
'''G91''' ; coordinates ; relative ''(because we don't want to go to Z10, but Z 10 away from current position)''<br />
'''G0 Z10''' ; drop bed 10mm<br />
'''G92''' ; coordinates ; absolute<br />
'''G28 X0 Y0''' ; home ; X and Y<br />
<br />
3. Next, we want to take care of any temperature settings. M104/140 just set the temps for head/bed; M109/M190 set AND WAIT for these temps:<br />
<br />
'''M190 S80''' ; bed temp ; set and wait<br />
'''M109 T12 S240''' ; head temp ; set and wait ; second slot from left (TXX for tool VARIABLES)<br />
<br />
4. Finally, we want to assign which head will do the printing:<br />
<br />
'''T1''' ; active head ; second slot from left (TX for tool COMMANDS)<br />
<br />
5. Now, let's code a move to the start point. G0 is for "rapid" non-working (non-printing) moves:<br />
<br />
'''G0 Z0.5''' ; rapid move to put the head 0.5 mm above the build surface (assuming you have already set the Z-zero)<br />
'''G0 X50 Y25''' ; rapid move to put the head/bed positioning at X 50, Y 25, our starting point for this line<br />
'''G1 X50 Y175 E1''' ; extrusion move to the end point - in this case, moving in the Y axis only<br />
'''G1 X60 Y175''' ; extrusion-speed move (without extrusion) to start of next line - No E value means no extrusion<br />
'''G1 X60 Y25 E1''' ; extrusion move to the next end-point<br />
<br />
6. Easy enough, so now let's double the flow rate and increase the print temperature (and pause for the temp to change) for the next line:<br />
<br />
'''M221 T12 S2''' ; flow rate ; multiplier x2 (S2)<br />
'''M109 T12 S250''' ; head temp ; set and wait, second slot from left<br />
'''G1 X70 Y25''' ; extrusion-speed move (without extrusion) to start of next line<br />
'''G1 X70 Y175 E1''' ; extrusion move to the next end-point<br />
<br />
'''[[T_v4|Always refer to the correct chart for your T commands and T variables!]]'''<br />
<br />
== How do I pick the right recipes for this head? ==<br />
<br />
The recipes are not head-specific.<br />
<br />
# Pick (or create) a PRINT recipe with the proper nozzle inner diameter, layer thickness, and other physical properties that you want in your output.<br />
# Pick the PRINTER recipe that matches the printer type, tool position, and type (heated or unheated) head that you will print with.<br />
# Pick the EXTRUDER ONE FILAMENT recipe that matches the temperatures you wish to print under.<br />
<br />
== How do I dispense a Specific Amount? ==<br />
<br />
Because sometimes folks just want to dispense a set number of microliters. <br />
<br />
Remember, the links on the left can take you to frequently-sought pages.<br />
<br />
=== Dispense 1000 uL ===<br />
<br />
To dispense 1,000 uL, you can press the "Dispense 1000 ul" button on the OverRides page:<br />
<br />
[[File:OverRides-2022.png|100px]]<br />
<br />
But if that's not working... read on.<br />
<br />
=== Prime (some) uL ===<br />
<br />
Another option: you can read the Pulses/ul value (in this case, 65) and put it times (however many uL you want) in the Steps field of the Prime page (where 3000 is shown here) and then click "PRIME NOW!!!":<br />
<br />
[[File:Prime-2022.png|100px]]<br />
<br />
=== M722 (Prime) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M722 (Prime) command in: '''M722 E65000 T12 I1''' and then execute it with a right click:<br />
<br />
[[File:Send-M722.png|600px]]<br />
<br />
For more about this command, see [[Gcode#M722_Set_Prime_Values]]<br />
<br />
=== M723 (Manual Extrusion) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M723 (Manual Extrusion) command in: '''M723 E65000 T12''' and then execute it with a right click:<br />
<br />
[[File:Send-M723.png|600px]]<br />
<br />
For more about this command, see Gcode#M723_Set_Manual_Flow<br />
<br />
== How do I configure for mixing materials? ==<br />
<br />
We have various ways of mixing materials. <br />
<br />
Please tell me:<br />
<br />
# How many separate parts do you need to mix?<br />
# Are they at ambient temperature, heated, or cooled?<br />
# Are they roughly the same viscosity?<br />
# What is the total volume of each part?<br />
# Fixed or changing ratios?<br />
# Static or active blending?<br />
<br />
This will help me guide you to the best configuration for your materials.<br />
<br />
== How do I understand these v4 errors? ==<br />
<br />
So, if your gcode is just for one head, which isn't specified, and you only have one head loaded, Repetrel always has and will still print with that head (you just need to acknowledge the warnings first).<br />
<br />
Our newer recipes, available from '''[[Slicing]]''', includes these commands for single-head prints. If you have moved into multi-head prints and need assistance in specifying this info, please contact Davo for some instruction.<br />
<br />
=== ERROR_TX_QUEUE_FULL ===<br />
<br />
This means that between your print speed, nozzle width, and layer thickness, we can't spin the dispensing motor that fast.<br />
<br />
Solution? Change the motor to 1/2 step mode (vs 1/16 step mode) and divide the pulses per microliter by 4. Also divide the prime/umprime steps and time by 4. Save changes.<br />
<br />
<br />
=== Missing Tx Argument ===<br />
<br />
However, not coding the tool to be used is unacceptable in the CNC world, and we want people to get used to coding in their tool assignments. And yes, it should say Tx command, not Tx argument.<br />
<br />
As detailed at the very top of the '''[[Gcode|Gcode Page]]''', you should use a '''T#''' command, where # is the slot of the tool you will use, starting with '''T0''' for the left most slot, '''T1''' for the second from the left, etc. Failure to do this will pop up this warning:<br />
<br />
[[File:Tx.png]]<br />
<br />
This is non-fatal; you can just hit enter or click "OK" and continue, but we want to encourage you to specify which tool to use.<br />
<br />
=== Heads Not Installed ===<br />
<br />
So, you've bypassed (or didn't get) that first error, and now you get another error:<br />
<br />
[[File:Inst.png]]<br />
<br />
This means that when your file was loaded, it was scanned for any '''Tx''' commands - but when you pressed print, the tool positions occupied on the printer don't match the tool assignments in the gcode. Again, this is non-fatal, and if you know your setup is correct, you can hit enter or click "Yes". But, again, we want you to know that the configuration detected on the printer does not match the configuration specified in the gcode.<br />
<br />
=== But It Matches! ===<br />
<br />
So, perhaps you've gotten these errors, and then edited your gcode file to specify '''T1''', which matches the slot where your head is loaded. Well, we don't scan the gcode a second time 'unless your right-click in the gcode and select "refresh gcode"' - doing this will eliminate getting this message after you have edited in the assignment:<br />
<br />
[[File:Refresh.png|250px]]<br />
<br />
=== How do I know which T parameter to use? ===<br />
<br />
Awesome question. We know it can be confusing, and that's why we have pages explaining just that!<br />
<br />
For Repetrel version 4 and earlier, please see '''[[T v4]]'''.<br />
<br />
For Repetrel version 5 and later, please see '''[[T v5]]''', where we've simplified this!<br />
<br />
=== My "NEW" machine just lost one of its axes or heads! ===<br />
<br />
With the new CANBUS-controlled motors, introduced in 2021, it turns out we have a little bit too much termination, and if you're using multiple heads you will have to remove the '''R25''' CANBUS termination resistor from one (or, better yet, all) of the heads. This is easy - just hit it with a hot soldering iron and it should pop off. Click image for larger version.<br />
<br />
[[File:103_remove_r25.jpg|400px]]<br />
<br />
== How do I get past the NAN error? ==<br />
<br />
If you slice your STL and get "NAN" errors, these mean "Not A Number", and mean that your STL file wasn't completely manifold - the software could not determine, logically, the division between "solid" and "void" space. This is often caused when software intended for rendering things on-screen lack the precision to model for additive manufacturing. Many times this can be corrected by using MeshLab (or another program) and healing the model - ensuring that all the intersections for the triangular mesh of the STL line up, forming an "air tight" mesh. See https://www.youtube.com/watch?v=eLGIRAgLz4w for instructions.<br />
<br />
This also applies to "unable to close this loop" errors during slicing.<br />
<br />
== How do I get rid of an M660 setting? ==<br />
<br />
If you accidentally run an EHR gcode on another model, and you've stored the M660 Z offset, then just change the H1 (or whichever you set) to 0, run it again to invoke it and set it to 0, and then just don't invoke any H offset values, since they are only used on the EHR.<br />
<br />
== How should I understand that E Value? ==<br />
<br />
For most printers, the number after the E means how much material to Extrude.<br />
<br />
On our printers, if you are on v4 and you use the M229 E1 D1 command (explained on the '''[[Gcode]]''' page, click on '''Controlling Material Flow''' and then on '''M229'''), then this E number, generated by the slicer, is how much VOLUME of material to extrude during each G1 move that has an E value.<br />
<br />
Also on our printers, if you are on v3 or earlier, or if you are on v4 and you do NOT specify M229 E1 D1, then we will use the presence of an E value simply to determine if this move should have material extruded or not; then we will calculate what rate to extrude at based on your nozzle diameter, layer thickness, and F value (movement speed in mm/min). This is explained on the '''[[Flow Rate]]''' page.<br />
<br />
I personally recommend '''USING the M229 E1 D1''' if you are printing with thermoplastics, as some slicers adjust this E value for thicker lines (or layers).<br />
<br />
I personally recommend '''NOT USING the M229 E1 D1''' if you are printing with liquids, gels, or clays, as these shapes very rarely have overhangs or bridges.<br />
<br />
==How do I create or import the files for the part I want?==<br />
<br />
You can create your stl file with most of the popular cad packages, such as SolidWorks, AutoCad, Alibre, FreeCad, Google SketchUp, ProE, TurboCad, etc.<br />
<br />
We bring the .stl file into MeshLab to heal the file (remove reference lines, resolve duplicate vertices, etc.).<br />
<br />
Then we bring the healed .stl file into Slic3r to slice it (convert it into the G-code that drives the printer). We will provide typical Slic3r recipes (temperature, flow rate, movement speed, layer thickness, etc.) for filaments and extrudables.<br />
<br />
Then we use our very customized version of Repitier Host, which drives the printer to create your part using the G-code from Slic3r.<br />
<br />
==How do I generate a constant frequency PWM at 400Hz+?==<br />
<br />
1. Set the head type to "Laser_6" and save the settings:<br><br />
[[File:Set_laser_6.png]]<br />
<br />
2. Pull the PWM signal from the PA2 or PA3 pins on the 10-pin programming connector:<br><br />
[[File:103_PA2_PA3.png|300px]]<br />
<br />
<br />
==How do I understand these LEDs?==<br />
<br />
This is the STM 103 board, and the LEDs function like this; also watch this video: https://www.youtube.com/watch?v=ROpcvqS_r8s&ab_channel=HyRel<br />
<br />
[[File:HH_LEDS.png]]<br />
<br />
== Why does my motor grind on the Filament? ==<br />
<br />
Standard causes and solutions for the motor grinding on the filament (and not advancing it as rapidly as needed):<br />
<br />
{| border="1" class="wikitable sortable" style="width: 85%;"<br />
|+ Filament Grinding<br />
! style="width: 45%;" | Possible Cause<br />
! style="width: 35%;" | Suggested Fix<br />
|-<br />
|colspan="2"| Friction or resistance on the delivery path before the motor shaft, including things like:<br />
|-<br />
| tangled spool <br> kinked filament <br> sharp entrance angle where filament enters guide tubing <br> kinked tubing.<br />
| untangle <br> unkink <br> make gentler angle <br> unkink<br />
|-<br />
|colspan="2"| Friction or resistance on the exit path after the motor shaft, including things like:<br />
|-<br />
| Filament not fully melting fast enough for the demanded throughput. <br> Nozzle too narrow for the demanded throughput. <br> Nozzle too close to build surface, causing back pressure.<br />
| Try higher temperature, thinner layers, and/or slower print speed. <br> Try extra torque head, or suggestions above. <br> Reestablish Z-zero positioning.<br />
|-<br />
| Buildup on drive shaft hobs (teeth).<br />
| Use vacuum or air pressure to clean out the hobs for optimal filament engagement and drive.<br />
|-<br />
|}<br />
<br />
== Why does my bed or head read 1023°C or 1024°C? ==<br />
<br />
Well, when we flash the head (or bed) controller settings, the type of RTD is not updated. <br />
<br />
Pleae go into the head (or bed) controller settings, change all RTD types to "1k_PLAT" or "1k_PRTD" (depends on your version), and then flash the settings to the device with a right-click, "flash head settings", and click OK.<br />
<br />
Click "reset" in the upper right of Repetrel if needed; your device should now be reporting the proper temperature.<br />
<br />
NOTE: If you have an ESR or 30M, the '''BED''' RTD types should be set to "50K". Also, a few heads from 2015 and earlier may have a different type - please try each one until you find the one that works.<br />
<br />
== Why does my ESR/30M Bed read 426C? ==<br />
<br />
If you have an ESR or 30M from 2020 or earlier, and we have sent you a new replacement hotbed (in 2021 or later), that printer and hotbed now have a resistor mismatch. GET WITH US and we'll walk you through fixing this.<br />
<br />
==Why doesn't my 30M or ESR bed heat up?==<br />
<br />
If you're on a 30M or an ESR, then the red LED on the bed should light up any time we send (heating) current to the bed. If it does not, then there is a bad fuse or a bad connection.<br />
<br />
The 15A fuse is located inside the X-arm:<br />
<br />
[[File:Xbed_fuse_15a.png|250px]]<br />
<br />
Check for 12V from ground to each side of this fuse.<br />
<br />
No 12V anywhere? The primary fuse on the spine has probably blown, or there is a bad connection.<br />
<br />
12V on one side, but not the other? This fuse has blown.<br />
<br />
12V on both sides? The fuse is fine, but you have a bad connection between here and the hotbed itself.<br />
<br />
Email us if you need help.<br />
<br />
== Why is my head/bed flashing red? ==<br />
<br />
All units should be upgraded to the latest version when it is available. If you run a head with v2 settings on a v3 or later install, the background will FLASH RED; this DOES NOT mean that you need to flash new FIRMWARE - this DOES mean that you need to flash new VALUES to the head. Please make the changes noted for each head and right-click-flash these values on your heads as shown in '''[[Firmware#Head_.2F_Bed_Settings|these instructions]]'''.<br />
<br />
== What Maintenance Should I Do? ==<br />
<br />
You can use a grease or an appropriate liquid oil. You can buy the manufacturer's oil applicator, but other machine oils such as "sewing machine oil" or "3-in-1 oil" should be fine.<br />
<br />
Oil is definitely the simplest. Just spread a few drops on the rail after wiping off all debris.<br />
<br />
Other than cleanliness (and a low-humidity environment), no other maintenance is required unless some problem arises.<br />
<br />
== How do I slice for 4th- or 4th-and-5th-axis machining? ==<br />
<br />
We normally do it by hand, but we also recommend [https://simplycad.blogspot.com/ SimplyCAD], which his free.<br />
<br />
== Why doesn't one head work? ==<br />
<br />
Actually, it's probably not the head, but the tool position. Try the head in another position. See below.<br />
<br />
== Why doesn't one tool position work? ==<br />
<br />
If you have one slote (or more) in which no heads heat up or advance material, but these heads work on other slots, you've probably blown one fuse (or more). These are easy to replace:<br />
<br />
=== You'll need to ensure that this is the problem: ===<br />
# Power down.<br />
# Remove the silver Phillips screws so that you can lift the upper yoke board up and pull it back, out of the way.<br />
# Check for resistance from one side of each fuse to the other (see blue arrows). Any fuse with 0 Ohms is good, but anything greater is blown. <br />
<br />
==== New Style ====<br />
<br />
From around 2016 on, we've been using fuse holders, which allow easy replacement:<br />
<br />
[[File:Yoke_fuses_new.png|300px]] (click to enlarge)<br />
<br />
These can be reordered from [https://www.digikey.com/en/products/detail/bel-fuse-inc/SSQ-4/615088 Digi-Key], or directly through us.<br />
<br />
[[File:4a_yoke_fuse_ss.png|300px]] (click to enlarge)<br />
<br />
==== Old Style ====<br />
<br />
Units from before 2016 may have fuses soldered in place:<br />
<br />
[[File:Yoke_fuse_old.png|300px]]<br />
<br />
These can be reordered from [http://www.digikey.com/product-detail/en/C1Q 4/507-1084-1-ND/615045 Digi-Key], or directly through us.<br />
<br />
[[File:Old_4a_yoke_fuse_ss.png|300px]] (click to enlarge)<br />
<br />
=== Replace the Fuse ===<br />
<br />
Replace the old, blown fuse with a new one (you may opt for a larger fuse, but only 15 amps maximum is sent to the yoke) by either simply swapping them out (new ones) or using a soldering iron to remove the old and attach the new (older ones). See images, above.<br />
<br />
Power up and test!<br />
<br />
== What fuses do you use? ==<br />
<br />
General package type is: Surface Mount 2-SMD, Square End Block<br />
0.240" L x 0.100" W x 0.110" H (6.10mm x 2.54mm x 2.79mm)<br />
<br />
There are 3 fuse ratings we use:<br />
* 5A: for most heads and 5V rail<br />
* 8A: high current heads like Tambora (replaces the 5A fuse in the yoke position)<br />
* 15A: 12V power bus<br />
<br />
Fast blow (recommended, especially for 5v rail/USB):<br />
* 5A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679L5000-01/5844017<br />
* 8A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679H8000-05/6139776<br />
* 15A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679H9150-01/6139759<br />
<br />
Slow Blow (use if you have blown a fuse while using a device like a spindle tool with a high inrush current):<br />
* 5A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0680L5000-05/10440930<br />
* 8A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0680L8000-05/10440943<br />
* 15A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0683G9150-01/15282999<br />
<br />
<br />
<br />
<br />
== How do I make this head work again? ==<br />
<br />
There are several things that might be wrong, so here's the full list:<br />
<br />
=== Ensure there is Power ===<br />
<br />
Do other heads work in this tool position? Does this head work in other tool positions?<br />
<br />
If the problem is with this tool position, you probably have a blown 4 Amp fuse - see '''[https://hyrel3d.com/wiki/index.php/How_do_I...#Why_doesn.27t_one_tool_position_work.3F these instructions]'''.<br />
<br />
<br />
If the problem is with the head, read on...<br />
<br />
=== Seat the Head ===<br />
<br />
The heads won't work unless all 16 pins on the connector on the head controller are properly seated into the connector on the yoke.<br />
<br />
# With the head unloaded, loosen the two screws on the back by about 90-180 degrees - just enough to be able to wiggle the circuit board.<br />
# Push your emergency stop in, load the head as far down as it will go, and then tighten the thumbscrew (or, on Hydras, the set screw with the 3mm hex driver - called a thumbscrew hereafter).<br />
# Now seat the circuit board so that it makes full contact along the entire connector; improper seating may turn the LEDs on without providing power.<br />
# Seat the spacer board all the way down, and tighten the screws.<br />
<br />
=== Flash the Firmware ===<br />
<br />
Sometimes the head can lose part of its firmware, so let's reload that with '''[https://hyrel3d.com/wiki/index.php/Firmware#Head_.2F_Bed_Firmware these instructions]'''.<br />
<br />
=== Store the Head Settings ===<br />
<br />
Sometimes the head can lose some of its settings, so let's reload them with '''[https://hyrel3d.com/wiki/index.php/Firmware#Head_.2F_Bed_Settings these instructions]'''.<br />
<br />
== What's that Clicking? ==<br />
<br />
When you hear clicking from a filament head, and material isn't coming out properly, it means that the head cannot advance the material as fast as the gcode demands. Possible causes and solutions:<br />
<br />
=== Mechanical or Logical? ===<br />
<br />
'''Question:''' Is this a problem with throughput in general, or with this print in particular?<br />
<br />
'''Investigation:''' Position the head above the bed (in mid air) and at print temp (240°C for ABS, 210°C for PLA, etc.); attempt to manually advance material at 500 pulses/second (500 on the screen). <br />
<br />
'''Answer 1:''' If this does not work, you have some mechanical issue - go to Case 1: Mechanical.<br />
<br />
'''Answer 2:''' If this works, your head is functioning normally, but we'll need to adjust your parameters - go to Case 2: Logical.<br />
<br />
'''Answer 3:''' If you cannot bring the head to the proper temperature for printing, we have a heating issue - go to Case 3: Heating.<br />
<br />
==== Case 1: Mechanical ====<br />
<br />
'''Most Common Cause:''' Input Problems. <br />
<br />
'''Most Common Solution:''' Find and remove cause of input restriction. Please ensure that there is smooth, low-friction delivery from the spool, through the pneumatic fitting on the chassis, through the PTFE tubing, through the pneumatic fitting on the head, and into the Feed Chamber on the head. There should be no bends or kinks or sharp angles, and no dragging across sharp surfaces. Filament should inter interior PTFE shaft after passing the drive shaft, centered on the hobs (gearing) and pressed firmly (but not too tightly) by two bearings separated by a washer. If you've disassembled and reassembled this part, ensure that this bearing rod is not flipped.<br />
<br />
'''Less Common Cause:''' Output Problems.<br />
<br />
'''Less Common Solution:''' Find and remove the cause of the output restriction. While rare (we do test prints with every head and every printer before shipping them), it's possible that some foreign material made its way into the fusion chamber or melting zone of the nozzle. Please follow instructions above for changing and cleaning nozzles, but replace the same nozzle.<br />
<br />
==== Case 2: Logical ====<br />
<br />
'''Most Common Cause:''' Temperature is too low for this combination of Material, Layer Thickness, and/or Print Speed.<br />
<br />
'''Resolution:''' Use a higher temperature and/or thinner layers and/or slower print speeds.<br />
<br />
'''Less Common Cause:''' If on first layer, perhaps Z-zero is wrong and nozzle is too close to build surface.<br />
<br />
'''Resolution:''' Ensure bed is level; recalibrate Z-zero.<br />
<br />
==== Case 3: Heating ====<br />
<br />
If the head is not reaching temperature, or not maintaining temperature, we need to find out why:<br />
<br />
Is the head set to the right temperature? Just look at the GUI to tell. If it cannot be set to the right temperature, some settings are wrong. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
Does the head reach the right temperature? Again, check the GUI. If the head is set properly, but does not warm up, we'll need to check to see if it's getting 12VDC. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
Does the head stay at the right temperature? Right, GUI again. If the head is set to temp, but later becomes set to a lower temp (or turned off), I'll need to examine your settings and gcode. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
== What's the Reset Button? ==<br />
<br />
The Reset button will clear and reestablish communications between the motion controller (the STM407 on the ESR and 30M, or the STM429 on the EHR and Hydra). This doesn't necessarily happen with a reboot, so sometimes we want to be sure it happens; but it's not a panic button, and you shouldn't press it if you don't need to. It's a small button on the motion controller, but we configure another button as well.<br />
<br />
The internal button looks like this on the 407 (ESR, 30M):<br />
<br />
[[File:407_reset.png|400px|407]]<br />
<br />
The internal button looks like this on the 429 (EHR, Hydra):<br />
<br />
[[File:429_reset.png|400px|429]]<br />
<br />
The external button on the 30M is on the front panel, and looks like this:<br />
<br />
[[File:Power_reset.png|200px|30M]]<br />
<br />
The external button on the ESR and EHR is on the right side and looks like this; earlier models have a green or red button:<br />
<br />
[[File:Engine_reset.png|200px|Engines]]<br />
<br />
The remote button on the 16A is located inside, behind the control panel, and looks like this:<br />
<br />
[[File:16A_reset.png|200px|16A]]<br />
<br />
== What About Exhaust? ==<br />
<br />
We recommend at least 500 cfm or 850 m3/h of exhaust while lasering. You will find a 6 " or 150 mm circular exhaust port on the lower left side of the Hydra 16A printers.<br />
<br />
Most thermoplastics do better with a heated chamber, so you would not want to vent (or have a very slight negative pressure to minimize escaping fumes) while printing with some materials (every material is different), but you may want to evacuate the air in the chamber after a print has completed. For this reason, an exhaust regulator with variable settings is probably the best solution.<br />
<br />
== How can I make Spindle Tool Gcode? ==<br />
<br />
We recommend SimplyCAM, a great, inexpensive program from https://www.mr-soft.net/en/scam.html<br />
<br />
== How should that Microprocessor be Set? ==<br />
<br />
Your motion controller (<span style="color: green;">green '''STM407''' on ESR and 30M printers</span>, or <span style="color: blue;">blue '''STM32''' on Hydra and EHR printers</span>) has two switches.<br />
<br />
<span style="color: red;">The '''BOOT CONFIG''' switch can be set to '''SYSTEM''' (usually up or left - sometimes needed for flashing firmware) or '''FLASH''' (usually down or right). '''It should be set to FLASH for normal operations.'''</span><br />
<br />
<span style="color: purple;">The unlabeled power switch can be set to '''USB''' (usually left or down - you should not need to use this setting) or '''5Vin'''. '''It should be set to 5Vin for normal operations.'''</span><br />
<br />
<span style="color: dodgerblue;">Note the '''RESET''' button, shown here above the USB connector and the LED. '''You need to RESET after changing any switch positions.''' All current printers also have a '''RESET''' button on the outside or inside of the chassis.</span><br />
<br />
Images:<br />
<br />
[[File:407_switches.jpg|500px]] [[File:429_switches.jpg|500px]]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Sekret!&diff=7774Sekret!2024-03-12T18:45:46Z<p>Davo: /* Tablet Password */</p>
<hr />
<div>[[Category:HowTo]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== Tablet Password ==<br />
<br />
The tablet password has two parts:<br />
<br />
A: either "tab" or "tablet"; and<br />
<br />
B: the last three or four digits of the serial number.<br />
<br />
So, if your tablet label has, for example:<br />
<br />
TECHB1H5100051<br />
CMIT ID 2019AP8640<br />
<br />
<br />
Try the following:<br />
<br />
tab051<br><br />
tab0051<br><br />
tablet051<br><br />
tablet0051<br><br />
tab640<br><br />
tab0640<br><br />
tablet640<br><br />
tablet0640<br />
<br />
== Gcodes Not For Everyone ==<br />
<br />
Advanced diagnostics and reporting. Not really secret, but intended for internal use.<br />
<br />
=== G38 Distance Probing ===<br />
<br />
G38 will move the bed until a probe until contact is made, and report the position when contact is made, storing a list of coordinate points with depths. This is helpful for making the bed level (and potentially working on non-planar surfaces).<br />
<br />
'''Usage'''<br />
<br />
G38 Xn Yn Zn An Bn T# Pn Dn In Hn On Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' ''relative'' move in this axis<br />
'''Yn''' ''relative'' move in this axis<br />
'''Zn''' ''relative'' move in this axis<br />
'''An''' ''relative'' move in this axis<br />
'''Bn''' ''relative'' move in this axis<br />
'''T#''' head where probe is loaded; if no '''T#''', probe is not in a tool position; default: no T<br />
'''Pn''' probe connection<br />
''If T is specified, P values can be:''<br />
'''0''' : PA3 pin on 10-pin connector<br />
'''1''' : PA2 pin on 10-pin connector<br />
'''2''' : LIMIT1 pin on 18-pin connector<br />
'''3''' : LIMIT2 pin on 18-pin connector<br />
'''4''' : RTD1 pin on 18-pin connector<br />
'''5''' : RTD2 pin on 18-pin connector<br />
''If T is not specified, P values can be:''<br />
'''0''' : No direct connect probe; canbus based probe one *** must specify probeHead via T arg<br />
'''1''' : X Limit1 or W_RTD1 (sys30)<br />
'''2''' : X Limit2 or W_RTD2 (sys30)<br />
'''3''' : X Fault<br />
'''4''' : X Home<br />
'''5''' : unused<br />
'''6''' : Y Limit1<br />
'''7''' : Y Limit2<br />
'''8''' : Y Fault<br />
'''9''' : Y Home<br />
'''10''' : unused<br />
'''11''' : Z Limit1<br />
'''12''' : Z Limit2<br />
'''13''' : Z Fault<br />
'''14''' : Z Home<br />
'''15''' : unused<br />
'''16''' : A Limit1<br />
'''17''' : A Limit2<br />
'''18''' : A Fault<br />
'''19''' : A Home<br />
'''20''' : unused<br />
'''21''' : B Limit1<br />
'''22''' : B Limit2<br />
'''23''' : B Fault<br />
'''24''' : B Home<br />
'''25''' : unused<br />
'''26''' : C Limit1<br />
'''27''' : C Limit2<br />
'''28''' : C Fault<br />
'''29''' : C Home<br />
'''D''' only 1 is presently supported; other options for future development<br />
'''I''' is probe polarity; 0 if contact makes a circuit, 1 if contact breaks the circuit<br />
'''H''' head offset register to use for tool dimension<br />
'''O''' additional offset<br />
'''F''' feedrate in mm/min (nonpersistent)<br />
<br />
'''Example'''<br />
<br />
G38 Z-9 T# P3 D1 I1 F200 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G38''' (probe) <br />
** '''Z-9''' (9 mm in Z toward 0)<br />
** '''T#''' (target head)<br />
** '''P3''' (LIMIT2 pin on 18-pin connector)<br />
** '''D1''' (only option)<br />
** '''I1''' (contact breaks circuit)<br />
** '''F200''' (at 200 mm/smin)<br />
<br />
<br><br />
<hr><br />
<br />
=== M619 Map Aux Port ===<br />
<br />
M619 sets the behavior (function and output timing) of a user-controllable switch (including aux ports and arm lights).<br />
<br />
Normally we expect users to keep the defaults - but some people will want to remap logical functions to other physical pins. Here are the details.<br />
<br />
This can be used to remap outputs associated with inputs, or to control frequency/duty cycle of outputs - or both.<br />
<br />
So I can associate the Laser X-hair button (logical function) with my X-arm "danger" LEDs (physical pins), or I can associate my M7 button on the CNC tab (logical function) with my Y-arm light (physical pins).<br />
<br />
'''Usage'''<br />
<br />
M619 Ln In Sn Hn On Fn Pn<br />
<br />
'''Parameters'''<br />
<br />
==== Ln ====<br />
<br />
Ln is the logical function (or button push) that we want to affect.<br />
<br />
{| border="1" class="wikitable" style="width: 85%;"<br />
|+ M619 Ln Mapping for ESR and 30M<br />
! style="width: 15%" | M619 L Parameter <br />
! style="width: 15%" | Alt MCode<br />
! style="width: 15%" | Description<br />
! style="width: 15%" | Default HSS<br />
! style="width: 15%" | Default I Value<br />
! style="width: 15%" | Notes<br />
|-<br />
! M619 L0 || N/A || none<br />
| none || N/A || none<br />
|-<br />
! M619 L1 || M7 || Mist Coolant<br />
| W2 || I8 || shared with Ext Head<br />
|-<br />
! M619 L2 || M8 || Flood Coolant<br />
| W1 || I7 || none<br />
|-<br />
! M619 L3 || M671 || X-Arm LEDs<br />
| X2 || I2 || none<br />
|-<br />
! M619 L4 || M670 || Y-Arm LEDs<br />
| Y1 || I3 || none<br />
|-<br />
! M619 L5 || M675 || RESP LEDs<br />
| X1 || I1 || none<br />
|-<br />
! M619 L6 || M677 || Buzzer<br />
| Z1 || I5 || none<br />
|-<br />
! M619 L7 || M676 || Recirc Fan<br />
| N/A || N/A || *16A only<br />
|-<br />
! M619 L8 || M678 || Laser X-hair<br />
| N/A || N/A || *16A only<br />
|-<br />
! M619 L9 || M684 || Exhaust<br />
| N/A || N/A || none<br />
|-<br />
! M619 L10 || M679 || Vacuum<br />
| N/A || N/A || *EHR/16A only<br />
|-<br />
! M619 L11 || M685 || (Positive) Air<br />
| N/A || N/A || *16A only<br />
|-<br />
! M619 L12 ||M689 || Ext. Head<br />
| W2 || I8 || shared with Mist Coolant<br />
|-<br />
! M619 L13 || M620 || CO<sub>2</sub> Power<br />
| N/A || N/A || *16A only<br />
|-<br />
|}<br />
<br />
<br />
{| border="1" class="wikitable" style="width: 85%;"<br />
|+ M619 Ln Mapping for EHR and 16A<br />
! style="width: 15%" | M619 L Parameter <br />
! style="width: 15%" | Alt MCode<br />
! style="width: 15%" | Description<br />
! style="width: 15%" | Default HSS<br />
! style="width: 15%" | Default I Value<br />
! style="width: 15%" | Notes<br />
|-<br />
! M619 L0 || N/A || none<br />
| N/A || N/A || none<br />
|-<br />
! M619 L1 || M7 || Mist Coolant<br />
| AP1 || I1 || shared with Ext Head<br />
|-<br />
! M619 L2 || M8 || Flood Coolant<br />
| AP2 || I2 || none<br />
|-<br />
! M619 L3 || M671 || Danger LEDs<br />
| N/A || N/A || *ESR/30M only<br />
|-<br />
! M619 L4 || M670 || Gantry LEDs<br />
| AP5 || I4 || none<br />
|-<br />
! M619 L5 || M675 || RESP LEDs<br />
| AP6 || I5 || none<br />
|-<br />
! M619 L6 || M677 || Buzzer<br />
| N/A || N/A || *ESR/30M only<br />
|-<br />
! M619 L7 || M676 || Recirc Fan<br />
| AP7 || I6 || none<br />
|-<br />
! M619 L8 || M678 || Laser X-hair<br />
| AP9 || I8 || 16A only<br />
|-<br />
! M619 L9 || N/A || Exhaust<br />
| N/A || N/A || none<br />
|-<br />
! M619 L10 || M679 || Vacuum<br />
| DR1 || I9 || none<br />
|-<br />
! M619 L11 || M685 || (Positive) Air<br />
| DR2 || I10 || none<br />
|-<br />
! M619 L12 || N/A || Ext. Head<br />
| AP1 || I1 || shared with Mist Coolant<br />
|-<br />
! M619 L13 || M620 || CO<sub>2</sub> Power<br />
| AP4 || I3 || 16A only<br />
|-<br />
|}<br />
<br />
==== In ====<br />
<br />
In designates the physical pins that we want to affect:<br />
<br />
{| border="1" class="wikitable" style="width: 85%;"<br />
|+ M619 In Mapping for ESR and 30M<br />
! style="width: 15%" | M619 I Parameter<br />
! style="width: 15%" | Switch (pins)<br />
! style="width: 15%" | Default Descr<br />
! style="width: 15%" | Default L Mapping<br />
! style="width: 15%" | Notes<br />
|-<br />
! M619 I1 || X1<br />
| RESP LEDs || L5 || none<br />
|-<br />
! M619 I2 || X2<br />
| X-Arm LEDs || L3 || none<br />
|-<br />
! M619 I3 || Y1<br />
| Y-Arm LEDs || I13 ||none<br />
|-<br />
! M619 I4 || Y2<br />
| N/A || N/A || none<br />
|-<br />
! M619 I5 || Z1<br />
| Buzzer || L5 || none<br />
|-<br />
! M619 I6 || Z2<br />
| N/A || N/A || none<br />
|-<br />
! M619 I7 || W1<br />
| Flood Coolant || L7 || none<br />
|-<br />
! M619 I8 || W2<br />
| Mist / Ext Head || L8 || dual mapping<br />
|-<br />
|}<br />
<br />
{| border="1" class="wikitable" style="width: 85%;"<br />
|+ M619 Ln Mapping for EHR and 16A<br />
! style="width: 15%" | M619 I Parameter<br />
! style="width: 15%" | Switch (pins)<br />
! style="width: 15%" | Default Descr<br />
! style="width: 15%" | Default L Mapping<br />
! style="width: 15%" | Notes<br />
|-<br />
! M619 I1 || AP1<br />
| Mist / Ext Head || L8 || dual mapping<br />
|-<br />
! M619 I2 || AP2<br />
| Flood Coolant || L7 || none<br />
|-<br />
! M619 I3 || AP4<br />
| CO<sub>2</sub> Power || L13 || none<br />
|-<br />
! M619 I4 || AP5<br />
| Gantry LEDs || L4 || none<br />
|-<br />
! M619 I5 || AP6<br />
| RESP LEDs || L1 || none<br />
|-<br />
! M619 I6 || AP7<br />
| Recirc Fan || L7 || none<br />
|-<br />
! M619 I7 || AP8<br />
| N/A || N/A || none<br />
|-<br />
! M619 I8 || AP9<br />
| Laser X-hair || L11 || *optional<br />
|-<br />
! M619 I9 || DR1<br />
| Vacuum || L10 || none<br />
|-<br />
! M619 I10 || DR2<br />
| (Positive) Air || L11 || none<br />
|-<br />
! M619 I11 || DR3<br />
| N/A || N/A || none<br />
|-<br />
! M619 I12 || DR4<br />
| N/A || N/A || none<br />
|-<br />
|}<br />
<br />
==== Sn ====<br />
<br />
Sn dictates the power level, 0-100.<br />
<br />
==== Hn ====<br />
<br />
Hn specifies the polarity of the sensor: 0 or 1 (H0 = active low, H1 = active high). HSS default to H1, Drains default to H0. <br />
<br />
==== On ====<br />
<br />
On can limit each execution to a single iteration with an O1. Other values default to no limit.<br />
<br />
==== Fn ====<br />
<br />
Fn stipulates the frequency in Hz for the signal. If Fn and Pn are both specified, only Fn is used.<br />
<br />
==== Pn ====<br />
<br />
Pn stipulates the period in seconds for the signal. If Fn and Pn are both specified, only Fn is used.<br />
<br />
=== Example ===<br />
<br />
<span style="color: blue;">''Hey Davo, I want my Ultimus head to work on Aux2 (M8 port) instead of the standard Aux1 (M7 port).''</span><br />
<br />
Well, the easy way is that you can update the mapping by going to Settings > Printer on the I/O tab and click Apply.<br />
<br />
The gcode way is to bypass the GUI and enter this command:<br />
<br />
M619 F12 I2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M619''' (remap function)<br />
** '''F12''' (external head function)<br />
** '''I2''' (to Aux2 port)<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Toggle Y-Arm Light Now ===<br />
<br />
Turn on Y-arm light immediately. S 0 - 100 for duty.<br />
<br />
<br><br />
<hr><br />
<br />
=== M671 Toggle X-Arm Lights ===<br />
<br />
Toggle X-arm Lights S 0 - 100 for duty.<br />
<br />
<br><br />
<hr><br />
<br />
=== M672 Toggle Y-Arm with Sensor ===<br />
<br />
See main Gcode page.<br />
<br />
<br><br />
<hr><br />
<br />
=== M673 Toggle Y-Arm Light Next ===<br />
<br />
Toggle Y-arm light after all previous commands are finished. S 0 - 100 for duty.<br />
<br />
<br><br />
<hr><br />
<br />
=== M772 Reset All Metrics ===<br />
<br />
In addition to info on the [[Gcode]] page, these other reports are available:<br />
<br />
M772 - reset all internal data gathering to “0” state<br />
Sn - optional. If Sn != 0, then Sn is a mask of which reports to auto send when M30 is processed. S1 or S3 are typical user settings to get basic print info.<br />
Bit0 (0x01): enables M773 report (basic print stats)<br />
Bit1 (0x02): enables M774 report (system configuration)<br />
Bit2 (0x04): enables M774 report (queue metrics)<br />
Bit3 (0x08): enables M775 report (crashDataFromRam)<br />
Bit4 (0x10): enables M776 report (command and motionQ usage)<br />
Bit5 (0x20): enables M779 report (slice timing)<br />
<br />
<br><br />
<hr><br />
<br />
=== M773 Generate Basic Report ===<br />
<br />
M773 generates a basic report of printing statistics (including average speed, number of primes, etc.)<br />
<br />
Note: this report will be more meaningful if you use '''M772''' to reset these counters at the start of a job.<br />
<br />
'''Usage'''<br />
<br />
M773<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M773<br />
<br />
* '''M773''' (generate basic report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M773 - print job metrics Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Time (s) Dist (m)<br />
>IN: 50: -------- --------<br />
>IN: 50: Totals: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Printing moves: 0.0 0.000<br />
>IN: 50: Non-printing moves 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Accelerating: 0.0 0.000<br />
>IN: 50: Cruising: 0.0 0.000<br />
>IN: 50: Decelerating: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: can e steps issued: 0<br />
>IN: 50: approx filament (PI*d) 0.000 m<br />
>IN: 50: approx filament (PIr^2) 0.000 m<br />
>IN: 50: unprimes issued: 0<br />
>IN: 50: primes issued: 0<br />
>IN: 50: unprime-primes avoided: 0<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M773 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
=== M774 Generate Queue Report ===<br />
<br />
M774 generates a queue metrics report:<br />
<br />
'''Usage'''<br />
<br />
M774<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M774<br />
<br />
* '''M774''' (generate queue report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M774 - queue metrics Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Total commands: 109<br />
>IN: 50: Total moves: 0<br />
>IN: 50: Max commands in CmdQue: 9 (60)<br />
>IN: 50: Max commands in motionQ: 0 (50)<br />
>IN: 50: Max commands in deferredCmdQue: 0 (15)<br />
>IN: 50: Max chars in raw RX buffer: 1 (256)<br />
>IN: 50: Max chars in urgent RX buffer: 0 (1024)<br />
>IN: 50: Max chars in normal RX buffer: 43 (6144)<br />
>IN: 50: Max chars in direct RX buffer: 0 (8192)<br />
>IN: 50: Max chars in serial TX buffer: 697 (6144)<br />
>IN: 50: Total serial TX chars rejected: 0 (6144)<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M774 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
=== M775 Generate Crash Report ===<br />
<br />
M775 generates a crash data report:<br />
<br />
'''Usage'''<br />
<br />
M775<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M775<br />
<br />
* '''M775''' (generate queue report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M775 - current crashDataFromRAM Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: slice_1Hz = 1<br />
>IN: 50: slice_10Hz = 5<br />
>IN: 50: slice_100Hz = 9<br />
>IN: 50: slice_1000Hz = 3<br />
>IN: 50: lsiActualFreq = 0<br />
>IN: 50: <br />
>IN: 50: CAN1->MCR = 0x00010044<br />
>IN: 50: CAN1->MSR = 0x00000c00<br />
>IN: 50: CAN1->TSR = 0x1c030303<br />
>IN: 50: CAN1->IER = 0x00000000<br />
>IN: 50: CAN1->ESR = 0x00000000<br />
>IN: 50: CAN1->BTR = 0x0012000d<br />
>IN: 50: <br />
>IN: 50: CAN1->sTxMailBox[0].TIR = 0x89408004<br />
>IN: 50: CAN1->sTxMailBox[0].TDTR = 0x00000008<br />
>IN: 50: CAN1->sTxMailBox[0].TDLR = 0x00000008<br />
>IN: 50: CAN1->sTxMailBox[0].TDHR = 0x00000008<br />
>IN: 50: CAN1->sTxMailBox[1].TIR = 0x80088006<br />
>IN: 50: CAN1->sTxMailBox[1].TDTR = 0x00000008<br />
>IN: 50: CAN1->sTxMailBox[1].TDLR = 0x00000000<br />
>IN: 50: CAN1->sTxMailBox[1].TDHR = 0x00000000<br />
>IN: 50: CAN1->sTxMailBox[2].TIR = 0x880a0924<br />
>IN: 50: CAN1->sTxMailBox[2].TDTR = 0x00000008<br />
>IN: 50: CAN1->sTxMailBox[2].TDLR = 0x00000003<br />
>IN: 50: CAN1->sTxMailBox[2].TDHR = 0x00000000<br />
>IN: 50: <br />
>IN: 50: total_commandsProcessed = 109<br />
>IN: 50: total_motionQprocessed = 0<br />
>IN: 50: total_DeferredProcessed = 0<br />
>IN: 50: total_charsRx = 2331<br />
>IN: 50: total_charsTx = 22871<br />
>IN: 50: total_canRx = 3233<br />
>IN: 50: total_canTx = 1772<br />
>IN: 50: <br />
>IN: 50: max_CommandsInQue = 9<br />
>IN: 50: max_motionQvalidEntries = 0<br />
>IN: 50: max_DeferredCommandsInQue = 0<br />
>IN: 50: max_rawRxCharsInBuf = 1<br />
>IN: 50: max_urgentRxCharsInBuf = 0<br />
>IN: 50: max_normalRxCharsInBuf = 43<br />
>IN: 50: max_directRxCharsInBuf = 0<br />
>IN: 50: max_normalTxCharsInBuf = 697<br />
>IN: 50: max_canRxQ_numMsg = 88<br />
>IN: 50: max_canTxQ_numMsg = 34<br />
>IN: 50: <br />
>IN: 50: curr_CommandsInQue = 5<br />
>IN: 50: curr_motionQ.validEntries = 0<br />
>IN: 50: curr_DeferredCommandsInQue = 0<br />
>IN: 50: curr_rawRxCharsInBuf = 0<br />
>IN: 50: curr_urgentRxCharsInBuf = 0<br />
>IN: 50: curr_normalRxCharsInBuf = 0<br />
>IN: 50: curr_normalTxCharsInBuf = 0<br />
>IN: 50: curr_gs._canRxQ.numMsg = 0<br />
>IN: 50: curr_gs._canRxQ.numMsg = 0<br />
>IN: 50: <br />
>IN: 50: curr_rawRxIndexIn = 73<br />
>IN: 50: curr_rawRxIndexOut = 73<br />
>IN: 50: curr_urgentRxIndexIn = 0<br />
>IN: 50: curr_urgentRxIndexOut = 0<br />
>IN: 50: curr_normalRxIndexIn = 822<br />
>IN: 50: curr_normalRxIndexOut = 822<br />
>IN: 50: curr_normalTxIndexIn = 6084<br />
>IN: 50: curr_normalTxIndexOut = 6126<br />
>IN: 50: <br />
>IN: 50: _serialPortRxOverrunCnt = 0<br />
>IN: 50: flushedRxCharsDuringAbort = 0<br />
>IN: 50: <br />
>IN: 50: pendingAcknowledge = 0<br />
>IN: 50: _gcodeCmdsReceived = 43<br />
>IN: 50: _gcodeAcksSent = 43<br />
>IN: 50: <br />
>IN: 50: _g4DwellTimer = 0<br />
>IN: 50: _gcodePaused = 0<br />
>IN: 50: _abortInProgress = 0<br />
>IN: 50: _blockAllMotion = 1<br />
>IN: 50: _blockAbsoluteMotion = 0<br />
>IN: 50: _motionSensorTripped = 0<br />
>IN: 50: _waitingFor.flags.u32 = 0x00000000<br />
>IN: 50: _needToProcessDeferredCommands = 0<br />
>IN: 50: <br />
>IN: 50: X.HomeSense.State = 1<br />
>IN: 50: Y.HomeSense.State = 1<br />
>IN: 50: Z.HomeSense.State = 2<br />
>IN: 50: A.HomeSense.State = 2<br />
>IN: 50: B.HomeSense.State = 2<br />
>IN: 50: C.HomeSense.State = 2<br />
>IN: 50: <br />
>IN: 50: X.FaultSense.State = 2<br />
>IN: 50: Y.FaultSense.State = 2<br />
>IN: 50: Z.FaultSense.State = 2<br />
>IN: 50: A.FaultSense.State = 2<br />
>IN: 50: B.FaultSense.State = 2<br />
>IN: 50: C.FaultSense.State = 2<br />
>IN: 50: <br />
>IN: 50: X.Limit1Sense.State = 2<br />
>IN: 50: Y.Limit1Sense.State = 2<br />
>IN: 50: Z.Limit1Sense.State = 2<br />
>IN: 50: A.Limit1Sense.State = 2<br />
>IN: 50: B.Limit1Sense.State = 2<br />
>IN: 50: C.Limit1Sense.State = 2<br />
>IN: 50: <br />
>IN: 50: X.Limit2Sense.State = 2<br />
>IN: 50: Y.Limit2Sense.State = 2<br />
>IN: 50: Z.Limit2Sense.State = 2<br />
>IN: 50: A.Limit2Sense.State = 2<br />
>IN: 50: B.Limit2Sense.State = 2<br />
>IN: 50: C.Limit2Sense.State = 2<br />
>IN: 50: <br />
>IN: 50: X.HasBeenHomed = 0<br />
>IN: 50: Y.HasBeenHomed = 0<br />
>IN: 50: Z.HasBeenHomed = 1<br />
>IN: 50: A.HasBeenHomed = 1<br />
>IN: 50: B.HasBeenHomed = 1<br />
>IN: 50: C.HasBeenHomed = 1<br />
>IN: 50: <br />
>IN: 50: _validFirmwareKey = 1<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M775 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
=== M776 Generate Motion Report ===<br />
<br />
M776 generates a motion report:<br />
<br />
'''Usage'''<br />
<br />
M776<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M776<br />
<br />
* '''M776''' (generate queue report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M776 - cmd/motionQ usage histograms Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: motionQ numEntries histogram at start of move (total moves: 0)<br />
>IN: 50: --: 0 (executed while forcing Q empty)<br />
>IN: 50: 1: 0<br />
>IN: 50: 2: 0<br />
>IN: 50: 3: 0<br />
>IN: 50: 4: 0<br />
>IN: 50: 5: 0<br />
>IN: 50: 6: 0<br />
>IN: 50: 7: 0<br />
>IN: 50: 8: 0<br />
>IN: 50: 9: 0<br />
>IN: 50: 10: 0<br />
>IN: 50: 11: 0<br />
>IN: 50: 12: 0<br />
>IN: 50: 13: 0<br />
>IN: 50: 14: 0<br />
>IN: 50: 15: 0<br />
>IN: 50: 16: 0<br />
>IN: 50: 17: 0<br />
>IN: 50: 18: 0<br />
>IN: 50: 19: 0<br />
>IN: 50: 20: 0<br />
>IN: 50: 21: 0<br />
>IN: 50: 22: 0<br />
>IN: 50: 23: 0<br />
>IN: 50: 24: 0<br />
>IN: 50: 25: 0<br />
>IN: 50: 26: 0<br />
>IN: 50: 27: 0<br />
>IN: 50: 28: 0<br />
>IN: 50: 29: 0<br />
>IN: 50: 30: 0<br />
>IN: 50: 31: 0<br />
>IN: 50: 32: 0<br />
>IN: 50: 33: 0<br />
>IN: 50: 34: 0<br />
>IN: 50: 35: 0<br />
>IN: 50: 36: 0<br />
>IN: 50: 37: 0<br />
>IN: 50: 38: 0<br />
>IN: 50: 39: 0<br />
>IN: 50: 40: 0<br />
>IN: 50: 41: 0<br />
>IN: 50: 42: 0<br />
>IN: 50: 43: 0<br />
>IN: 50: 44: 0<br />
>IN: 50: 45: 0<br />
>IN: 50: 46: 0<br />
>IN: 50: 47: 0<br />
>IN: 50: 48: 0<br />
>IN: 50: 49: 0<br />
>IN: 50: 50: 0<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: cmdQue numEntries histogram when cmd received (total cmds: 109)<br />
>IN: 50: <br />
>IN: 50: 0: 89<br />
>IN: 50: 1: 2<br />
>IN: 50: 2: 4<br />
>IN: 50: 3: 2<br />
>IN: 50: 4: 4<br />
>IN: 50: 5: 2<br />
>IN: 50: 6: 2<br />
>IN: 50: 7: 2<br />
>IN: 50: 8: 2<br />
>IN: 50: 9: 0<br />
>IN: 50: 10: 0<br />
>IN: 50: 11: 0<br />
>IN: 50: 12: 0<br />
>IN: 50: 13: 0<br />
>IN: 50: 14: 0<br />
>IN: 50: 15: 0<br />
>IN: 50: 16: 0<br />
>IN: 50: 17: 0<br />
>IN: 50: 18: 0<br />
>IN: 50: 19: 0<br />
>IN: 50: 20: 0<br />
>IN: 50: 21: 0<br />
>IN: 50: 22: 0<br />
>IN: 50: 23: 0<br />
>IN: 50: 24: 0<br />
>IN: 50: 25: 0<br />
>IN: 50: 26: 0<br />
>IN: 50: 27: 0<br />
>IN: 50: 28: 0<br />
>IN: 50: 29: 0<br />
>IN: 50: 30: 0<br />
>IN: 50: 31: 0<br />
>IN: 50: 32: 0<br />
>IN: 50: 33: 0<br />
>IN: 50: 34: 0<br />
>IN: 50: 35: 0<br />
>IN: 50: 36: 0<br />
>IN: 50: 37: 0<br />
>IN: 50: 38: 0<br />
>IN: 50: 39: 0<br />
>IN: 50: 40: 0<br />
>IN: 50: 41: 0<br />
>IN: 50: 42: 0<br />
>IN: 50: 43: 0<br />
>IN: 50: 44: 0<br />
>IN: 50: 45: 0<br />
>IN: 50: 46: 0<br />
>IN: 50: 47: 0<br />
>IN: 50: 48: 0<br />
>IN: 50: 49: 0<br />
>IN: 50: 50: 0<br />
>IN: 50: 51: 0<br />
>IN: 50: 52: 0<br />
>IN: 50: 53: 0<br />
>IN: 50: 54: 0<br />
>IN: 50: 55: 0<br />
>IN: 50: 56: 0<br />
>IN: 50: 57: 0<br />
>IN: 50: 58: 0<br />
>IN: 50: 59: 0<br />
>IN: 50: 60: 0<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M776 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
=== M784 Generate Summary Report ===<br />
<br />
M784 generates a system summary report:<br />
<br />
'''Usage'''<br />
<br />
M784<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M784<br />
<br />
* '''M784''' (generate queue report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M784 - System Summary Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Motion Controller: <br />
>IN: 50: <br />
>IN: 50: DEBUG_EngineSR_30M_5.000za :mcu 0x413 0x1001 :uid 0x3a002c00 0x18473132 0x39373139 :UART6<br />
>IN: 50: License key: 4vxBFI46rsyXbS6__dU5mdS3WP8X8dLi<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Compatible Devices:<br />
>IN: 50: <br />
>IN: 50: T# Location DeviceType SW Loaded PCB RTD1 RTD2 RTD3 SubType SW Codebase Can# Fmt# <br />
>IN: 50: ----- ----------- ------------ -------------------------- -------- -------- -------- -------- ------------ ------------ ---- ---- <br />
>IN: 50: T1 Yoke1 Head2 MK1 Heads_Beds_103_5.000za.hex 4988_J 1K None None Standard Medusa5 1 2 <br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Incompatible Devices (must be upgraded to 5.x software):<br />
>IN: 50: <br />
>IN: 50: OldT# Location <br />
>IN: 50: ----- -----------<br />
>IN: 50: T14 Yoke1 Head4<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M784 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
=== M795 Set Jog Amount ===<br />
<br />
M795 generates a sensor status report:<br />
<br />
'''Usage'''<br />
<br />
M795 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''S''' is the amount in MICRONS for the Jog Increment<br />
<br />
'''Example 1'''<br />
<br />
M795 S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M795''' (set Jog increment)<br />
** '''S50''' (to 50 microns)<br />
<br />
<br><br />
<hr><br />
<br />
=== M797 Report Sensors ===<br />
<br />
M797 generates a sensor status report:<br />
<br />
'''Usage'''<br />
<br />
M797 In<br />
<br />
'''Parameters'''<br />
<br />
'''I''' can be 1 (logical states) or 2 (physical values)<br />
<br />
'''Example 1'''<br />
<br />
M797 I1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M797''' (generate sensor report)<br />
** '''I1''' (show logical states)<br />
<br />
'''Sample Output 1''' (30M/ESR)<br />
<br />
>GB: Logical States (M797 I1)<br />
>GB: AX ST DR HM L1 L2 FT<br />
>GB: == == == == == == ==<br />
>GB: X - F H . . . ''<= in this example, X is currently homed''<br />
>GB: Y - F - . . . ''<= in this example, Y is not currently homed''<br />
>GB: Z - F . . . . <br />
>GB: A not installed<br />
>GB: B not installed<br />
>GB: <end><br />
<br />
Column definitions:<br />
AX - Axis<br />
ST - Step<br />
DR - Direction<br />
HM - Home<br />
L1 - Limit 1<br />
L2 - Limit 2<br />
FT - Fault<br />
<br />
'''Example 2'''<br />
<br />
M797 I2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M797''' (generate sensor report)<br />
** '''I2''' (show physical values)<br />
<br />
'''Sample Output 2''' (30M/ESR)<br />
<br />
>GB: Physical values (M797 I2)<br />
>GB: AX ST DR HM L1 L2 FT<br />
>GB: == == == == == == ==<br />
>GB: X 1 0 1 . . . ''<= in this example, X is currently homed''<br />
>GB: Y 1 0 0 . . . ''<= in this example, Y is not currently homed'' <br />
>GB: Z 1 0 . . . . <br />
>GB: A not installed<br />
>GB: B not installed<br />
>GB: <end><br />
<br />
<br><br />
<hr></div>Davohttps://hyrel3d.com/wiki/index.php?title=Videos&diff=7773Videos2024-03-12T18:39:06Z<p>Davo: /* 2024 (3) */</p>
<hr />
<div>[[Category:HowTo]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== Table of Videos ==<br />
<br />
Please also see:<br />
<br />
* The '''[[Instructions]]''' page <br />
* The '''[[Help]]''' page<br />
* The '''[[FAQs]]''' page<br />
* The '''[[How_do_I...]]''' page<br />
<br />
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.<br />
<br />
Note:<br />
<br />
The following chart compares and contrasts the various printers:<br />
<br />
https://hyrel3d.com/wiki/index.php/Printer_Overview<br />
<br />
The following chart compares and contrasts the various heads:<br />
<br />
https://hyrel3d.com/wiki/index.php/Head_Overview<br />
<br />
=== Count ===<br />
<br />
292 videos as of Feb 2024.<br />
<br />
=== 2024 (3) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2024<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:1gtfdQCLGacQ.png|200px|link=https://www.youtube.com/watch?v=gtfdQCLGacQ]]<br />
| Slicing a DXF to etch with a Hyrel 3D Diode Laser<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:1y5nrlOKWK6M.png|200px|link=https://www.youtube.com/watch?v=y5nrlOKWK6M]]<br />
| Hyrel3D: HEATED Small Volume Mixing Kit (SVMK) setup<br />
| Any<br />
| Reservoir<br />
|-<br />
! [[File:PsaduGKoLJw.png|200px|link=https://www.youtube.com/watch?v=PsaduGKoLJw]]<br />
| Hyrel 3D: Dual RSD instructions<br />
| Any<br />
| Reservoir<br />
|-<br />
|}<br />
<br />
=== 2023 (11) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2023<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:U1RRO7YDT4M.png|200px|link=https://www.youtube.com/watch?v=u1RRO7YDT4M]]<br />
| 75mm tall PPSU part printed on Hydra 21<br />
| H21<br />
| Filament<br />
|-<br />
! [[File:6g4C8rsn3Ks.png|200px|link=https://www.youtube.com/watch?v=6g4C8rsn3Ks]]<br />
| Configuring the Hyrel 3D RSD-30 head (heating and cooling)<br />
| Any<br />
| RSD-30<br />
|-<br />
! [[File:TJR_xZNTRHM.png|200px|link=https://www.youtube.com/watch?v=tJR_xZNTRHM]]<br />
| Hyrel 3D use at Universidad Autónoma de Occidente, Columbia<br />
| 30M<br />
| Various<br />
|-<br />
! [[File:W33CN9IGQiY.png|200px|link=https://www.youtube.com/watch?v=W33CN9IGQiY]]<br />
| Drying and Preheating filament with an air fryer<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:H_PQNuxNNJ8.png|200px|link=https://www.youtube.com/watch?v=H_PQNuxNNJ8]]<br />
| Closed-loop Bio Dispensing on a Scale with 1.5% accuracy<br />
| Any<br />
| head_activity<br />
|-<br />
! [[File:6g4C8rsn3Ks.png|200px|link=https://www.youtube.com/watch?v=6g4C8rsn3Ks&ab_channel=Hyrel3D]]<br />
| RSD-30 Configuration<br />
| Any<br />
| SDS<br />
|-<br />
! [[File:ETKVKX4PIBA.png|200px|link=https://www.youtube.com/shorts/ETKVKX4PIBA]]<br />
| New Chuwi Tablet Installation<br />
| 30M<br />
| Tablet<br />
|-<br />
! [[File:1foqRMFgVjM8.png|200px|link=https://www.youtube.com/watch?v=foqRMFgVjM8]]<br />
| Slicing and printing TPU on a Hyrel 3D printer<br />
| All<br />
| FH2<br />
|-<br />
! [[File:1pF2_ZCXF_7w.png|200px|link=https://www.youtube.com/watch?v=pF2_ZCXF_7w]]<br />
| Hyrel 3D's new 300cc bulk feeder heads for liquids, gels, pastes.<br />
| All<br />
| EMO-300XT<br />
|-<br />
! [[File:1mDlVP7HDVLw.png|200px|link=https://www.youtube.com/watch?v=mDlVP7HDVLw]]<br />
| Hyrel 3D: Heated Pneumatic Syringe Head Intro<br />
| All<br />
| 2HN-PNU*<br />
|-<br />
! [[File:6inSx0kMIEk.png|200px|link=https://www.youtube.com/watch?v=6inSx0kMIEk]]<br />
| New-style Pick-and-Place Head Introduction<br />
| H21<br />
| PNP<br />
|-<br />
|}<br />
<br />
=== 2022 (23) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2022<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:1sKF45LSvIU.png|200px|link=https://www.youtube.com/watch?v=1sKF45LSvIU]]<br />
| Hyrel3D Bioprinting at the Food and Bioengineering Lab of TalTech, Estonia<br />
| EHR<br />
| Printing<br />
|-<br />
! [[File:T2R3cuBm0S8.png|200px|link=https://www.youtube.com/watch?v=T2R3cuBm0S8]]<br />
| Additional Setup for new printers<br />
| All<br />
| n/a<br />
|-<br />
! [[File:SaCESWMzTzU.png|200px|link=https://www.youtube.com/watch?v=saCESWMzTzU]]<br />
| Technical University of Denmark printing on a Hyrel 3D Printer<br />
| ESR<br />
| Printing<br />
|-<br />
! [[File:Mprt_AHMJrQ.png|200px|link=https://www.youtube.com/watch?v=Mprt_AHMJrQ]]<br />
| Creating Text Objects with Repetrel<br />
| All<br />
| n/a<br />
|-<br />
! [[File:T0Sjq4gWLs0.png|200px|link=https://www.youtube.com/watch?v=t0Sjq4gWLs0]]<br />
| New Small Volume Mixing Kit<br />
| Any<br />
| SVMK, Microfluidics<br />
|-<br />
! [[File:FvAWmbVkBxE.png|200px|link=https://www.youtube.com/watch?v=FvAWmbVkBxE]]<br />
| Integrating MATLAB with Repetrel<br />
| Any<br />
| Any<br />
|-<br />
! [[File:6PqZkRNnbuI.png|200px|link=https://www.youtube.com/watch?v=6PqZkRNnbuI]]<br />
| Adjusting to avoid Elephant Foot with PCL and similar materials<br />
| Any<br />
| KR2, TAM<br />
|-<br />
! [[File:8oTzRYFHFy0.png|200px|link=https://www.youtube.com/watch?v=8oTzRYFHFy0]]<br />
| Hyrel head lowering attachment<br />
| Any<br />
| Any<br />
|-<br />
! [[File:RMVCPDqZamI.png|200px|link=https://www.youtube.com/watch?v=rMVCPDqZamI]]<br />
| Cleaning residue from the HIgh Torque KR2 cartridge<br />
| Any<br />
| HTK<br />
|-<br />
! [[File:ZcLTrAIVWh8.png|200px|link=https://www.youtube.com/watch?v=zcLTrAIVWh8]]<br />
| Scaling your print with the Hyrel Microscope<br />
| Any<br />
| Microscope<br />
|-<br />
! [[File:HSUTLFg41cI.png|200px|link=https://www.youtube.com/watch?v=rMVCPDqZamI]]<br />
| Cleaning PCL, PLA, or PDO residue the Hyrel HTK cartridge of the KR2 head.<br />
| Any<br />
| Cleanup<br />
|-<br />
! [[File:M9WznRpnLY8.png|200px|link=https://www.youtube.com/watch?v=M9WznRpnLY8]]<br />
| Using head offsets to change tool positions while leaving the output in the same location<br />
| Any<br />
| Calibration<br />
|-<br />
! [[File:CM9AwdiZQ2M.png|200px|link=https://www.youtube.com/watch?v=cM9AwdiZQ2M]]<br />
| Demo setup and test: Pick-and-Place<br />
| H21<br />
| Configuration<br />
|-<br />
! [[File:N1HVzUgp5hU.png|200px|link=https://www.youtube.com/watch?v=N1HVzUgp5hU]]<br />
| EHR Position Adjustment <br />
| EHR<br />
| Calibration<br />
|-<br />
! [[File:PRvXvj02wdU.png|200px|link=https://www.youtube.com/watch?v=pRvXvj02wdU]]<br />
| Analyzing and calculating the porosity of scaffolds - Hyrel 3D<br />
| Any<br />
| Scaffolds<br />
|-<br />
! [[File:CoPUoa5knws.png|200px|link=https://www.youtube.com/watch?v=CoPUoa5knws]]<br />
| Replacing big tree board on Z motor on Hydra 21.<br />
| H21<br />
| Maintenance<br />
|-<br />
! [[File:ZcsDLxkzio8.png|200px|link=https://www.youtube.com/watch?v=zcsDLxkzio8]]<br />
| How to prepare powdered material for use in Hyrel 3D's heated syringe heads. <br />
| All<br />
| Bio<br />
|-<br />
! [[File:NQn0MgFGswE.png|200px|link=https://www.youtube.com/watch?v=NQn0MgFGswE]]<br />
| How to level the build platform on the new Hyrel 3D Hydra 21 printer. <br />
| H21<br />
| Maintenance<br />
|-<br />
! [[File:R5NerkHj1aY.png|200px|link=https://www.youtube.com/watch?v=R5NerkHj1aY]]<br />
| How to measure the scale of biological scaffold prints.<br />
| All<br />
| Bio<br />
|-<br />
! [[File:KPSnNNQ3Mao.png|200px|link=https://www.youtube.com/watch?v=KPSnNNQ3Mao]]<br />
| How to melt and print with PCL pellets with the Hyrel KR2 head.<br />
| All<br />
| Bio<br />
|-<br />
! [[File:0uU5M8bwkDU.png|200px|link=https://www.youtube.com/watch?v=0uU5M8bwkDU]]<br />
| How to remove PCL scaffolds from PVC build surface.<br />
| All<br />
| Bio<br />
|-<br />
! [[File:FTPT0TiFSJw.png|200px|link=https://www.youtube.com/watch?v=FTPT0TiFSJw]]<br />
| Hydra 21 Unboxing Instructions<br />
| H21<br />
| All<br />
|-<br />
! [[File:FB4Sy0HFy8.png|200px|link=https://www.youtube.com/watch?v=_fB4Sy0HFy8]]<br />
| Cirles, Arcs, Spirals, and Helixes: Hyrel's G2 and G3 gcode generation tool<br />
| All<br />
| All<br />
|-<br />
|}<br />
<br />
=== 2021 (44) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2021<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:Ah_UguF8cNg.png|200px|link=https://www.youtube.com/watch?v=ah_UguF8cNg]]<br />
| Scaffolds: Adjusting the flow value (P/uL)<br />
| All<br />
| All<br />
|-<br />
! [[File:CT-4Sk2DBMw.png|200px|link=https://www.youtube.com/watch?v=cT-4Sk2DBMw]]<br />
| Scaffolds: Adjusting the final retract (unprime)<br />
| All<br />
| All<br />
|-<br />
! [[File:MbLeyEoBXek.png|200px|link=https://www.youtube.com/watch?v=mbLeyEoBXek]]<br />
| Scaffold Gradient: Speed and Z position Instructions<br />
| All<br />
| All<br />
|-<br />
! [[File:AcVa5mrdjFQ.png|200px|link=https://www.youtube.com/watch?v=AcVa5mrdjFQ]]<br />
| Scaffold Gradient: Speed Instructions<br />
| All<br />
| All<br />
|-<br />
! [[File:VBAFH6J5-to.png|200px|link=https://www.youtube.com/watch?v=vBAFH6J5-to]]<br />
| Scaffold Perimeters Tool<br />
| All<br />
| All<br />
|-<br />
! [[File:HT0i3EP4HBM.png|200px|link=https://www.youtube.com/watch?v=hT0i3EP4HBM]]<br />
| Customizing Visualization in Repetrel<br />
| All<br />
| All<br />
|-<br />
! [[File:Be-4iCfWM8s.png|200px|link=https://www.youtube.com/watch?v=be-4iCfWM8s]]<br />
| Biogel Scaffold Speed Test<br />
| All<br />
| All<br />
|-<br />
! [[File:CEW_RQqCDPM.png|200px|link=https://www.youtube.com/watch?v=cEW_RQqCDPM]]<br />
| Programming BigTree Drivers for Hyrel Printers<br />
| All<br />
| Flashing<br />
|-<br />
! [[File:P0G0uKOokJ8.png|200px|link=https://www.youtube.com/watch?v=p0G0uKOokJ8]]<br />
| Using a USB Camera with Repetrel<br />
| All<br />
| Camera<br />
|-<br />
! [[File:GjIXmTDOg5E.png|200px|link=https://www.youtube.com/watch?v=gjIXmTDOg5E]]<br />
| Heated Nozzle Accessory<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:Onnl10Ea1tQ.png|200px|link=https://www.youtube.com/watch?v=Onnl10Ea1tQ]]<br />
| Scaffold Options in Repetrel<br />
| All<br />
| All<br />
|-<br />
! [[File:QnvzDbYEFfA.png|200px|link=https://www.youtube.com/watch?v=qnvzDbYEFfA]]<br />
| Cleaning the Hyrel 3D DMH-2 Dynamic Mixing Head<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:3KLIdStlvwU.png|200px|link=https://www.youtube.com/watch?v=3KLIdStlvwU]]<br />
| Calibrating Head Offsets for Hyrel 3D<br />
| All<br />
| All<br />
|-<br />
! [[File:BZBItYywCjM.png|200px|link=https://www.youtube.com/watch?v=bZBItYywCjM]]<br />
| Hyrel 3D "Return Trip" Option for Scaffolds<br />
| All<br />
| Zebra Prints<br />
|-<br />
! [[File:TKa3gzb18qk.png|200px|link=https://www.youtube.com/watch?v=tKa3gzb18qk]]<br />
| Hyrel 3D Viscosity Test Clean Up<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:S_CGzgx0NMM.png|200px|link=https://www.youtube.com/watch?v=S_CGzgx0NMM]]<br />
| Hyrel 3D's Coaxial Extrusion Head with Nozzle Heater<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:P28Y7NNT3DQ.png|200px|link=https://www.youtube.com/watch?v=P28Y7NNT3DQ]]<br />
| Configuring "Zebra" prints in Repetrel on Hyrel 3D Printers<br />
| All<br />
| Zebra Prints<br />
|-<br />
! [[File:DX1fBX51XNI.png|200px|link=https://www.youtube.com/watch?v=dX1fBX51XNI]]<br />
| Designing Scaffolds in Repetrel<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:St6nehNLTdc.png|200px|link=https://www.youtube.com/watch?v=St6nehNLTdc]]<br />
| Resolving a stuck plunger in a Hyrel 3D reservoir head<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:AtQuLaYVGzA.png|200px|link=https://www.youtube.com/watch?v=AtQuLaYVGzA]]<br />
| Hyrel 3D Announces Polar Printing for Extreme Environments!<br />
| Polar<br />
| All<br />
|-<br />
! [[File:ADqB1DjM9Ug.png|200px|link=https://www.youtube.com/watch?v=aDqB1DjM9Ug]]<br />
| Eliminating air bubbles in a Hydrogel<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:MbyRncFmpyg.png|200px|link=https://www.youtube.com/watch?v=MbyRncFmpyg]]<br />
| Cleaning Hyrel 3D's DMH-2 Dynamic Mixing Head<br />
| All<br />
| DMH-2<br />
|-<br />
! [[File:JvenAK33OmI.png|200px|link=https://www.youtube.com/watch?v=JvenAK33OmI]]<br />
| How to echo gcode commands to the display <br />
| All<br />
| Usage<br />
|-<br />
! [[File:Hd4iq3HR9c8.png|200px|link=https://www.youtube.com/watch?v=Hd4iq3HR9c8]]<br />
| Removing PCL Prints Faster and Easier<br />
| All<br />
| PCL<br />
|-<br />
! [[File:Hcxd5uonkxE.png|200px|link=https://www.youtube.com/watch?v=hcxd5uonkxE]]<br />
| Overview of the Hyrel 3D "Quiet Storm" Additional Cooling Fan<br />
| All<br />
| Quiet Storm<br />
|-<br />
! [[File:V5cKuYY1PAw.png|200px|link=https://www.youtube.com/watch?v=V5cKuYY1PAw]]<br />
| Preparation and Setup for Printing PCL (polycaprolactone)<br />
| All<br />
| PCL<br />
|-<br />
! [[File:7ozTI_eiFqk.png|200px|link=https://www.youtube.com/watch?v=7ozTI_eiFqk]]<br />
| Choosing and Specifying Parameters for Rectangular Infill Scaffolds<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:Dfm8RYyzmas.png|200px|link=https://www.youtube.com/watch?v=dfm8RYyzmas]]<br />
| Choosing and Specifying Parameters for Gyroid Infill PCL Scaffolds<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:ASy9HIwz04Q.png|200px|link=https://www.youtube.com/watch?v=aSy9HIwz04Q]]<br />
| Showing the Effects of Cooling while Printing<br />
| All<br />
| Cooling<br />
|-<br />
! [[File:A4bXqRb5-q8.png|200px|link=https://www.youtube.com/watch?v=A4bXqRb5-q8]]<br />
| How to manage Accessory Manuals in Repetrel<br />
| All<br />
| Usage<br />
|-<br />
! [[File:EXMxgF-Yf1o.png|200px|link=https://www.youtube.com/watch?v=eXMxgF-Yf1o]]<br />
| Saving, Naming and Reusing Scaffolds<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:3H-gJNUDncA.png|200px|link=https://www.youtube.com/watch?v=3H-gJNUDncA]]<br />
| How to work with our Heated Nozzle Accessory<br />
| All<br />
| Heated Nozzles<br />
|-<br />
! [[File:DXjh36CcRAw.png|200px|link=https://www.youtube.com/watch?v=DXjh36CcRAw]]<br />
| Using Filters to refine SurferBuddy search results<br />
| All<br />
| SurferBuddy<br />
|-<br />
! [[File:JQCcelqLoQE.png|200px|link=https://www.youtube.com/watch?v=jQCcelqLoQE]]<br />
| How to Export SurferBuddy Files to External Drive 1<br />
| All<br />
| SurferBuddy<br />
|-<br />
! [[File:EqoyARWTTLo.png|200px|link=https://www.youtube.com/watch?v=EqoyARWTTLo]]<br />
| Using Parameter Profiles in Repetrel <br />
| All<br />
| Parameter Profiles<br />
|-<br />
! [[File:NbfntNBKSIg.png|200px|link=https://www.youtube.com/watch?v=NbfntNBKSIg]]<br />
| How to Export GCODE from Repetrel<br />
| All<br />
| Usage<br />
|-<br />
! [[File:5lYDLhbnQxE.png|200px|link=https://www.youtube.com/watch?v=5lYDLhbnQxE]]<br />
| Using offsets to repeat a job in different locations<br />
| All<br />
| Offsets<br />
|-<br />
! [[File:3tRDj7y54SU.png|200px|link=https://www.youtube.com/watch?v=3tRDj7y54SU]]<br />
| Custom screeding attachment for the Hyrel Hydra <br />
| 16A<br />
| Calibration<br />
|-<br />
! [[File:JljdH1V4ips.png|200px|link=https://www.youtube.com/watch?v=jljdH1V4ips]]<br />
| Hyrel Nozzle Heater for Reservoir Heads<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:Qqh2Y0Wg9HA.png|200px|link=https://www.youtube.com/watch?v=qqh2Y0Wg9HA]]<br />
| Unboxing the Hyrel EHR for electro-spinning or melt-electro-writing (MEW)<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:Calibrate.png|200px|link=https://www.youtube.com/watch?v=93fE6I8L_Z0]]<br />
| Calibrating Travel on the EHR<br />
| EHR<br />
| Calibration<br />
|-<br />
! [[File:Unpack.png|200px|link=https://www.youtube.com/watch?v=BZjoNhQcYb8]]<br />
| Unpacking and Setting Up the EHR<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:VjZlZkBt130.png|200px|link=https://www.youtube.com/watch?v=vjZlZkBt130]]<br />
| How to check if your CO2 Laser is working<br />
| Hydra<br />
| Lasers<br />
|-<br />
! [[File:SDqVHXZxrBI.png|200px|link=https://www.youtube.com/watch?v=sDqVHXZxrBI]]<br />
| Etching Aluminum with 450 nm Diode Laser<br />
| any<br />
| Lasers<br />
|-<br />
! [[File:9BKE469eL0M.png|200px|link=https://www.youtube.com/watch?v=9BKE469eL0M]]<br />
| Heated and Chilled Vacuum Bed (HCVB)<br />
| EHR, 16A<br />
| Reservoir<br />
|-<br />
|}<br />
<br />
=== 2020 (30) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2020<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:NW-O76oAlu4.png|200px|link=https://www.youtube.com/watch?v=NW-O76oAlu4]]<br />
| The Hyrel Hydra Electrical Panel, Explained<br />
| 16A<br />
| Overview<br />
|-<br />
|-<br />
! [[File:SF7UoogD-mg.png|200px|link=https://www.youtube.com/watch?v=SF7UoogD-mg]]<br />
| Making DXFs from Camera Images<br />
| All<br />
| Lasers<br />
|-<br />
! [[File:Vipro.png|200px|https://www.youtube.com/watch?v=_Mr7qEBgu8M]]<br />
| Viscotec Vipro HEAD-3 on Hyrel<br />
| All<br />
| Viscotec<br />
|-<br />
! [[File:LajxuYqTw6o.png|200px|link=https://www.youtube.com/watch?v=IajxuYqTw6o]]<br />
| Explaining the NEW RSD-30<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:IbdUwZyZm3I.png|200px| link=https://www.youtube.com/watch?v=IbdUwZyZm3I]]<br />
| Making DXFs from CAD Models<br />
| All<br />
| Lasers<br />
|-<br />
! [[File:1Rtktf-HeTU.png|200px| link=https://www.youtube.com/watch?v=1Rtktf-HeTU]]<br />
| 4th/5th Axis Installation and Setup<br />
| 16A<br />
| All<br />
|-<br />
! [[File:H8XnGKBEJCc.png|200px| link=https://www.youtube.com/watch?v=H8XnGKBEJCc]]<br />
| 3-Phase Spindle Tool Installation and Setup<br />
| 16A<br />
| Spindles<br />
|-<br />
! [[File:JW1-uhvZ5wM.png|200px| link=https://www.youtube.com/watch?v=JW1-uhvZ5wM]]<br />
| Clench/Pinch Valve Installation and Setup<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:X7J4pTeSq8A.png|200px| link=https://www.youtube.com/watch?v=X7J4pTeSq8A]]<br />
| Dynamic Mixing Head (DMH) Installation and Setup<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:Dlta7KSt3bE.png|200px| link=https://www.youtube.com/watch?v=Dlta7KSt3bE]]<br />
| EHR Electronics Access<br />
| EHR<br />
| Overview<br />
|-<br />
! [[File:H0pAYAraO0Q.png|200px| link=https://www.youtube.com/watch?v=WSwerPx93qA]]<br />
| ESR Unboxing and Setup<br />
| ESR<br />
| Setup<br />
|-<br />
! [[File:DgfeoLZNW6c.png|200px| link=https://www.youtube.com/watch?v=dgfeoLZNW6c]]<br />
| RSD-30 Refrigerated Syringe Dispenser<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:ILEvP8p_JGo.png|200px| link=https://www.youtube.com/watch?v=ILEvP8p_JGo]]<br />
| Printing on PEI<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:7lwJvyBso1k.png|200px| link=https://www.youtube.com/watch?v=7lwJvyBso1k]]<br />
| Printing Cememtitious Materials at TN Tech<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:PX9KFUrSPVk.png|200px| link=https://www.youtube.com/watch?v=pX9KFUrSPVk]]<br />
| Tightening set screws for Hydra X-axis<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:MOexKcvpcEY.png|200px| link=https://www.youtube.com/watch?v=mOexKcvpcEY]]<br />
| Interview on GA Mfg News<br />
| All<br />
| All<br />
|-<br />
! [[File:R7UimNDjNiY.png|200px| link=https://www.youtube.com/watch?v=r7UimNDjNiY]]<br />
| Hyrel V4 Install No. 9: Licensing<br />
| All<br />
| All<br />
|-<br />
! [[File:0CMH61RtSjk.png|200px| link=https://www.youtube.com/watch?v=0CMH61RtSjk]]<br />
| Hyrel V4 Install No. 8: Recipes<br />
| All<br />
| All<br />
|-<br />
! [[File:N1HZOvWKqs8.png|200px| link=https://www.youtube.com/watch?v=N1HZOvWKqs8]]<br />
| Hyrel V4 Install No. 7: Settings<br />
| All<br />
| All<br />
|-<br />
! [[File:9qbUzZM3vtg.png|200px| link=https://www.youtube.com/watch?v=9qbUzZM3vtg]]<br />
| Hyrel V4 Install No. 6`: Firmware<br />
| All<br />
| All<br />
|-<br />
! [[File:-JN_0iLTOk4.png|200px| link=https://www.youtube.com/watch?v=-JN_0iLTOk4]]<br />
| Hyrel V4 Install No. 5: Drivers<br />
| All<br />
| All<br />
|-<br />
! [[File:2BVzTR7ij5Y.png|200px| link=https://www.youtube.com/watch?v=2BVzTR7ij5Y]]<br />
| Hyrel V4 Install No. 4: Repetrel<br />
| All<br />
| All<br />
|-<br />
! [[File:-Dp-4_NdYm8.png|200px| link=https://www.youtube.com/watch?v=-Dp-4_NdYm8]]<br />
| Hyrel V4 Install No. 3: Adobe Reader<br />
| All<br />
| All<br />
|-<br />
! [[File:VH3Fv6jkA54.png|200px| link=https://www.youtube.com/watch?v=VH3Fv6jkA54]]<br />
| Hyrel V4 Install No. 2: Ecosystem Apps<br />
| All<br />
| All<br />
|-<br />
! [[File:OpM-RcDuM5c.png|200px| link=https://www.youtube.com/watch?v=OpM-RcDuM5c]]<br />
| Hyrel V4 Install No. 1: Winrar<br />
| All<br />
| All<br />
|-<br />
! [[File:MdNsQnHy4dQ.png|200px| link=https://www.youtube.com/watch?v=MdNsQnHy4dQ]]<br />
| Hydra 16AT - Tall<br />
| 16A<br />
| All<br />
|-<br />
! [[File:Zh-x9ugJ5nE.png|200px| link=https://www.youtube.com/watch?v=zh-x9ugJ5nE]]<br />
| Hyrel Bulk Feeder for Cementitious Materials<br />
| 16A<br />
| Reservoirs<br />
|-<br />
! [[File:RW7h9z5DW5A.png|200px| link=https://www.youtube.com/watch?v=rW7h9z5DW5A]]<br />
| Using the new Precision Tool Setter on a Hyrel 3D Printer<br />
| 16A<br />
| All<br />
|-<br />
! [[File:E7tQN_63hcc.png|200px| link=https://www.youtube.com/watch?v=E7tQN_63hcc]]<br />
| How to Dial In the Prime and Unprime Settings<br />
| All<br />
| All<br />
|-<br />
! [[File:TlnVUBryBg0.png|200px| link=https://www.youtube.com/watch?v=tlnVUBryBg0]]<br />
| Installing a Second Yoke on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
|}<br />
<br />
=== 2019 (22) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2019<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:S3qw8dAWeNo.png|200px| link=https://www.youtube.com/watch?v=S3qw8dAWeNo]]<br />
| RSD-30 - Refrigerated Syringe Dispenser<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:RAkjF9nLy4M.png|200px| link=https://www.youtube.com/watch?v=rAkjF9nLy4M]]<br />
| Heated & Chilled Vacuum Bed<br />
| 16A, EHR<br />
| HCVB<br />
|-<br />
! [[File:Gl3mbw88fmo.png|200px| link=https://www.youtube.com/watch?v=Gl3mbw88fmo]]<br />
| 4th Axis Fun - Linear and Rotary Printing<br />
| 16A<br />
| All<br />
|-<br />
! [[File:VVhH8hc3olc.png|200px| link=https://www.youtube.com/watch?v=vVhH8hc3olc]]<br />
| CO2 Laser - Installation Instructions<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:SVC5W_DdQ9E.png|200px| link=https://www.youtube.com/watch?v=sVC5W_DdQ9E]]<br />
| Dynamic Mixing Head DMH<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:4oqPbfdD8O0.png|200px| link=https://www.youtube.com/watch?v=4oqPbfdD8O0]]<br />
| Configuring Prusa Slicer for Multi-Material Support<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:DDwGcDgOOQs.png|200px| link=https://www.youtube.com/watch?v=DDwGcDgOOQs]]<br />
| Configuring the Prusa Slicer for Breakaway Support Material<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:AzFY-IqDB_0.png|200px| link=https://www.youtube.com/watch?v=azFY-IqDB_0]]<br />
| TIG Welding on a Hyrel Hydra<br />
| Hydra<br />
| Welding<br />
|-<br />
! [[File:CW77WBv3x0Q.png|200px| link=https://www.youtube.com/watch?v=cW77WBv3x0Q]]<br />
| How to Load Filament into a Hyrel 3D Print Head<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:EMfkmXFuPd0.png|200px| link=https://www.youtube.com/watch?v=EMfkmXFuPd0]]<br />
| Loading Print Heads into your Hyrel 3D Printer<br />
| All<br />
| All<br />
|-<br />
! [[File:XC1zLqYkKsc.png|200px| link=https://www.youtube.com/watch?v=xC1zLqYkKsc]]<br />
| How to Calibrate the Z-Zero Position<br />
| 16A, 30M, ESR<br />
| All<br />
|-<br />
! [[File:0Apq3tlila8.png|200px| link=https://www.youtube.com/watch?v=0Apq3tlila8]]<br />
| Revised 2019: Hyrel 30M Initial Setup<br />
| 30M<br />
| All<br />
|-<br />
! [[File:0MFtqhM6ZKM.png|200px| link=https://www.youtube.com/watch?v=0MFtqhM6ZKM]]<br />
| How to select a Build Surface<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:-4LuhNfbMAo.png|200px| link=https://www.youtube.com/watch?v=-4LuhNfbMAo]]<br />
| How to Tram (level) the Hydra Bed<br />
| 16A<br />
| All<br />
|-<br />
! [[File:C5-NYk06NVc.png|200px| link=https://www.youtube.com/watch?v=C5-NYk06NVc]]<br />
| Laser Marking on a Cylinder<br />
| All<br />
| Lasers<br />
|-<br />
! [[File:PjqDXXPjI4w.png|200px| link=https://www.youtube.com/watch?v=PjqDXXPjI4w]]<br />
| 4th/5th Axis Machining in Brass on a Hyrel Hydra<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:KmkGR7u5D58.png|200px | link=https://www.youtube.com/watch?v=kmkGR7u5D58]]<br />
| Configuring your Hydra for a 3-phase Spindle Tool<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:B0lvN-aPYHI.png|200px| link=https://www.youtube.com/watch?v=B0lvN-aPYHI]]<br />
| 4th/5th Axis Machining on a Hyrel Hydra <br> [http://hyrel3d.com/gcodes/ardes_tube_cap_milling.gcode (this gcode was used)]<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:CmBaHHAfbEo.png|200px| link=https://www.youtube.com/watch?v=CmBaHHAfbEo]]<br />
| Dispensing RTV Silicone on a Hyrel Hydra<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:G526vFi8yWI.png|200px| link=https://www.youtube.com/watch?v=G526vFi8yWI]]<br />
| Machining PTFE (Teflon) on a Hyrel Hydra<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:LfmssRdZwuE.jpg|200px| link=https://www.youtube.com/watch?v=LfmssRdZwuE]]<br />
| Rotating Head Prototype<br />
| 16A<br />
| Filaments<br />
|-<br />
! [[File:YhoMTLGVAbc.png|200px| link=https://www.youtube.com/watch?v=yhoMTLGVAbc]]<br />
| Re-aligning the Gantry on the Hyrel Hydra 16A<br />
| 16A<br />
| All<br />
|-<br />
|}<br />
<br />
=== 2018 (12) ===<br />
<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2018<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:CbxB96oZFGE.jpg|200px|link=https://www.youtube.com/watch?v=CbxB96oZFGE]]<br />
| Installing the new laser Power Supply in a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:KrwOviaCZuw.jpg|200px|link=https://www.youtube.com/watch?v=krwOviaCZuw]]<br />
| Hyrel Tapping Enabled<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:QuIM9XSYMxE.jpg|200px|link=https://www.youtube.com/watch?v=QuIM9XSYMxE]]<br />
| Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:Ni56OFo1VvM.jpg|200px|link=https://www.youtube.com/watch?v=ni56OFo1VvM]]<br />
| Improved UV Light Source for more Powerful Crosslinking<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:68oktmbp8r0.png|200px|link=https://www.youtube.com/watch?v=68oktmbp8r0]]<br />
| How to install 4th and 5th Axes on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:7DcqbBzs-ZQ.png|200px|link=https://www.youtube.com/watch?v=7DcqbBzs-ZQ]]<br />
| How to use an additional Yoke on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:VerQRjS3iWE.png|200px|link=https://www.youtube.com/watch?v=VerQRjS3iWE]]<br />
| How to install an additional Yoke on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:jSTmzuuMYvc.png|200px|link=https://www.youtube.com/watch?v=jSTmzuuMYvc]]<br />
| The Filament Dryer<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:lNURH2fRbY0.jpg|200px|link=https://www.youtube.com/watch?v=lNURH2fRbY0]]<br />
| 4th/5th Axes Demo on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:9R6OUMvb.jpg|200px|link=https://www.youtube.com/watch?v=_9R6OUMvb-o]]<br />
| Installing a 4th axis on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:2QqwfsKgzuQ.jpg|200px|link=https://youtu.be/2QqwfsKgzuQ]]<br />
| Machining hotbeds to under 0.001"<br />
| 16A<br />
| All<br />
|-<br />
! [[File:O1xmXCdj1xE.png|200px|link=https://youtu.be/O1xmXCdj1xE]]<br />
| Setting the Z-Offset on the EHR<br />
| EHR<br />
| All<br />
|}<br />
<br />
=== 2017 (45) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2017<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:KqnjlTSg-20.jpg|200px| link=https://youtu.be/kqnjlTSg-20]]<br />
| CO2 Laser Marking with the Hydra<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:FnYDoNkgOrI.jpg|200px| link=https://youtu.be/FnYDoNkgOrI]]<br />
| Converting a Hydra from Printer to Laser<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:FHqTlcdISIg.jpg|200px| link=https://youtu.be/fHqTlcdISIg]]<br />
| Cutting Nylon Mesh with CO2 Laser on a Hydra<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:NTejDT1B6uQ.jpg|200px| link=https://youtu.be/nTejDT1B6uQ]]<br />
| Chamber Temperature in a Cold Room<br />
| 16A<br />
| Filaments<br />
|-<br />
! [[File:4Y9V6RWhKj4.jpg|200px| link=https://youtu.be/4Y9V6RWhKj4]]<br />
| Cutting acrylic with the CO2 Laser<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:DkMtzPDtIQY.jpg|200px| link=https://youtu.be/dkMtzPDtIQY]]<br />
| Tiny Heated Chilled Bed Preview<br />
| EHR<br />
| Reservoirs<br />
|-<br />
! [[File:GdvyT8HoaOw.jpg|200px| link=https://youtu.be/gdvyT8HoaOw]]<br />
| 4th Axis Rotary Print<br />
| 16A<br />
| Filaments<br />
|-<br />
! [[File:3nKqwcXcEgY.png|200px| link=https://youtu.be/3nKqwcXcEgY]]<br />
| Additive Manufacturing of Toroid and Planar Inductors for Electronics Applications<br />
| 30M, ESR<br />
| Reservoirs<br />
|-<br />
! [[File:Az7V1FSRJfs.jpg|200px| link=https://www.youtube.com/watch?v=Az7V1FSRJfs]]<br />
| Hyrel Hydra X and Y Belt Tension Adjustments<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:SyMB5063J5E.jpg|200px| link=https://www.youtube.com/watch?v=SyMB5063J5E]]<br />
| Hyrel Hydra Linear Bearing Adjustments <br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:ZEsnegXhpLw.jpg|200px| link=https://www.youtube.com/watch?v=zEsnegXhpLw]]<br />
| Hyrel Hydra Z Belt Tension Adjustments<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:WNr59eCGuK4.png|200px| link=https://www.youtube.com/watch?v=WNr59eCGuK4]]<br />
| Changing the Address Resistor on the CO2 Laser<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:QBBxkx40H8s.png|200px| link=https://www.youtube.com/watch?v=qBBxkx40H8s]]<br />
| CO2 Laser Alignment<br />
| 16A<br />
| Calibration<br />
|-<br />
! [[File:YiizFlScq9Q.png|200px| link=https://www.youtube.com/watch?v=yiizFlScq9Q]]<br />
| Hydra Yoke Adjustment<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:CbiCnP_YEbA.png|200px| link=https://www.youtube.com/watch?v=cbiCnP_YEbA]]<br />
| Hydra Yoke Angle Adjustment<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:XMsXzGPHjng.png|200px| link=https://www.youtube.com/watch?v=xMsXzGPHjng]]<br />
| Engnie, High Resolution (EHR) Setup, Part 2<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:NbWgw9KY6Ic.png|200px| link=https://www.youtube.com/watch?v=NbWgw9KY6Ic]]<br />
| Engnie, High Resolution (EHR) Setup, Part 1<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:UC7acwIkKmQ.png|200px| link=https://www.youtube.com/watch?v=uC7acwIkKmQ]]<br />
| EHR Scaffold Instructions<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:b1x2dvdYkTE.png|200px| link=https://www.youtube.com/watch?v=b1x2dvdYkTE]]<br />
| EHR Scaffold Intro<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:oisWKujfXAI.png|200px| link=https://www.youtube.com/watch?v=oisWKujfXAI]]<br />
| Unclogging a rare clogged MK1-250 <br />
| All<br />
| Filaments<br />
|-<br />
! [[File:6FQJuhd2Lxo.png|200px| link=https://www.youtube.com/watch?v=6FQJuhd2Lxo]]<br />
| Unclogging a rare clogged MK1-450 <br />
| All<br />
| Filaments<br />
|-<br />
! [[File:WrImt7_Pnxo.png|200px| link=https://www.youtube.com/watch?v=WrImt7_Pnxo]]<br />
| Flashing Firmware on the Modified CO2 Laser Controller<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:1J5bqvcV3Rs.png|200px| link=https://www.youtube.com/watch?v=1J5bqvcV3Rs]]<br />
| The Hyrel Hydra Family<br />
| 16A<br />
| All<br />
|-<br />
! [[File:CF7eRdFuZYQ.png|200px| link=https://www.youtube.com/watch?v=CF7eRdFuZYQ]]<br />
| High Resolution Engine Vacuum Bed<br />
| EHR<br />
| Reservoirs<br />
|-<br />
! [[File:eltjeQ6KerM.png|200px| link=https://www.youtube.com/watch?v=eltjeQ6KerM]]<br />
| High Resolution Engine Setup<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:SvX4gKqAQDI.png|200px| link=https://www.youtube.com/watch?v=SvX4gKqAQDI]]<br />
| SDS Clench Valve Assembly Instructions<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:Mz5J8jsb6D4.png|200px| link=https://www.youtube.com/watch?v=Mz5J8jsb6D4]]<br />
| How to Load the SDS Clench Valve<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:JwKq8_tahYA.png|200px| link=https://www.youtube.com/watch?v=JwKq8_tahYA]]<br />
| EHR Accuracy Test<br />
| EHR<br />
| Calibration<br />
|-<br />
! [[File:Udbu_Zuh8k0.png|200px| link=https://www.youtube.com/watch?v=Udbu_Zuh8k0]]<br />
| Hydra 16A Controls Overview<br />
| 16A<br />
| All<br />
|-<br />
! [[File:cClPqIJwhLs.png|200px| link=https://www.youtube.com/watch?v=cClPqIJwhLs]]<br />
| Using Low Temperature Solder Paste to connect a Flat Flex Cable<br />
| 30M, ESR<br />
| Assembly<br />
|-<br />
! [[File:GCzPw4FOG8c.png|200px| link=https://www.youtube.com/watch?v=GCzPw4FOG8c]]<br />
| Draining Laser Coolant on the Hyrel Hydra<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:pPtGSwyS140.png|200px| link=https://www.youtube.com/watch?v=pPtGSwyS140]]<br />
| Hydra Home Calibration Details<br />
| 16A<br />
| Calibration<br />
|-<br />
! [[File:LLIWqTRBhTo.png|200px| link=https://www.youtube.com/watch?v=LLIWqTRBhTo]]<br />
| Replacing the top component on an SDS Head Assembly<br />
| 16A<br />
| Setup<br />
|-<br />
! [[File:qxbtI034omk.png|200px| link=https://www.youtube.com/watch?v=qxbtI034omk]]<br />
| HYDRA Hot Bed Installation<br />
| 16A<br />
| Setup<br />
|-<br />
! [[File:fuLCsqfAX3E.png|200px| link=https://www.youtube.com/watch?v=fuLCsqfAX3E]]<br />
| Hydra Model Startup<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:LhnV9H7LV9g.png|200px| link=https://www.youtube.com/watch?v=LhnV9H7LV9g]]<br />
| Unboxing the Hydra Floor Model Units<br />
| 16A<br />
| Setup<br />
|-<br />
! [[File:ULpn18OqD-U.png|200px| link=https://www.youtube.com/watch?v=ULpn18OqD-U]]<br />
| Hydra Overview by CTO Karl Gifford<br />
| 16A<br />
| All<br />
|-<br />
! [[File:QEfskyU7LJ4.png|200px | link=https://www.youtube.com/watch?v=QEfskyU7LJ4]]<br />
| How to Manage the Pick-and-Place with Repetrel Software<br />
| 16A<br />
| Pick-and-Place<br />
|-<br />
! [[File:Jz3onGdmW1c.png|200px| link=https://www.youtube.com/watch?v=Jz3onGdmW1c]]<br />
| Hyrel Hydra Versitility<br />
| 16A<br />
| All<br />
|-<br />
! [[File:pKkrd4R_54Y.png|200px| link=https://www.youtube.com/watch?v=pKkrd4R_54Y]]<br />
| Hydra Vinyl Cutter Overview<br />
| 16A<br />
| Cutting<br />
|-<br />
! [[File:haKWeCbXkMI.png|200px| link=https://www.youtube.com/watch?v=haKWeCbXkMI]]<br />
| Hyrel 3D Hydra Pick-and-Place Introduction<br />
| 16A<br />
| Pick-and-Place<br />
|-<br />
! [[File:uACoqtNbXE0.png|200px| link=https://www.youtube.com/watch?v=uACoqtNbXE0]]<br />
| The Hyrel3D Hydra Line<br />
| 16A<br />
| All<br />
|-<br />
! [[File:KAoSS-Z-aeY.png|200px| link=https://www.youtube.com/watch?v=KAoSS-Z-aeY]]<br />
| Tramming the bed on the 16A<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:tibkVZB_n9c.png|200px| link=https://www.youtube.com/watch?v=tibkVZB_n9c]]<br />
| The Benefits of Microscope Inspection During Printing<br />
| All<br />
| Microscopes<br />
|-<br />
! [[File:aR4d-2BZj_Y.png|200px| link=https://www.youtube.com/watch?v=aR4d-2BZj_Y]]<br />
| Printing PLGA for internal Biological Applications<br />
| All<br />
| Reservoirs<br />
|-<br />
|}<br />
<br />
=== 2016 (60) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2016<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:Z4IGQ5JMP6g.png|200px| link=https://www.youtube.com/watch?v=z4IGQ5JMP6g]]<br />
| Varialble Width Conductive Paste Extrusion <br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:2f5FEhVsqy8.png|200px| link=https://www.youtube.com/watch?v=2f5FEhVsqy8]]<br />
| Microscope Print View Setup<br />
| Any<br />
| Microscope<br />
|-<br />
! [[File:D2sWEYRVAII.png|200px| link=https://www.youtube.com/watch?v=D2sWEYRVAII]]<br />
| Replacing the LED Strip<br />
| 30M<br />
| Maintenance<br />
|-<br />
! [[File:14ynZ3DHzVg.png|200px| link=https://www.youtube.com/watch?v=14ynZ3DHzVg]]<br />
| Replacing the Front Switch Panel<br />
| 30M<br />
| Maintenance<br />
|-<br />
! [[File:DQj6oLfrbLo.png|200px| link=https://www.youtube.com/watch?v=DQj6oLfrbLo]]<br />
| Static Mixing Head (SMH) Explained - v2 Including SDS Heads<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:VJXnB-8JII.png|200px| link=https://www.youtube.com/watch?v=_vJXnB-8JII]]<br />
| Hot Bed Manufacturing<br />
| Hydra<br />
| Manufacturing<br />
|-<br />
! [[File:3azICOBuHdk.png|200px| link=https://www.youtube.com/watch?v=3azICOBuHdk]]<br />
| Static Mixing Head (SMH) Explained<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:6qJ-2uFt-_Y.png|200px| link=https://www.youtube.com/watch?v=6qJ-2uFt-_Y]]<br />
| Timelapse Recording<br />
| Any<br />
| Recording<br />
|-<br />
! [[File:ROpcvqS r8s.png|200px| link=https://www.youtube.com/watch?v=ROpcvqS_r8s]]<br />
| HotHead LEDs Explained<br />
| Any<br />
| Any<br />
|-<br />
! [[File:Tz6mRSkOaSk.png|200px| link=https://www.youtube.com/watch?v=Tz6mRSkOaSk]]<br />
| LA6-450 and LA5-808 Laser Overview<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:h95IurET7UM.png|200px| link=https://www.youtube.com/watch?v=h95IurET7UM]]<br />
| SDS and CSD Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:4B9hoMLNOuQ.png|200px| link=https://www.youtube.com/watch?v=4B9hoMLNOuQ]]<br />
| Quiet Storm Cooling Fan Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:9_onCKhT_dg.png|200px| link=https://www.youtube.com/watch?v=9_onCKhT_dg]]<br />
| VOL-25 and VCD-25 Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:QD2FrZ4kg1g.png|200px| link=https://www.youtube.com/watch?v=QD2FrZ4kg1g]]<br />
| KRA-15 and KCD-15 Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:Rc2UFwjUtc4.png|200px| link=https://www.youtube.com/watch?v=Rc2UFwjUtc4]]<br />
| Hydra 640 (16A) Two Part Test Print<br />
| Hydra<br />
| Filaments<br />
|-<br />
! [[File:Ql1NZLWVJQM.png|200px| link=https://www.youtube.com/watch?v=Ql1NZLWVJQM]]<br />
| Extrusion Prototype Print<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:KtK256u0sN8.png|200px| link=https://www.youtube.com/watch?v=ktK256u0sN8]]<br />
| EMO-25 and COD-25 Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:Vn8jnvwh5to.png|200px| link=https://www.youtube.com/watch?v=Vn8jnvwh5to]]<br />
| Session 3C Slicing for Multiple Head Support<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:p1Ihd4ETxhg.png|200px| link=https://www.youtube.com/watch?v=p1Ihd4ETxhg]]<br />
| Session 3A - Setting Two Heads to Z-Zero<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:FCuSvQm6ej4.png|200px| link=https://www.youtube.com/watch?v=FCuSvQm6ej4]]<br />
| Session 3B - Calibrating the Offset Between Two Heads<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:dkQpsJWRI4Y.png|200px| link=https://www.youtube.com/watch?v=dkQpsJWRI4Y]]<br />
| Session 2D - Editing Slic3r Recipes<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:kJc9sNlV0fA.png|200px| link=https://www.youtube.com/watch?v=kJc9sNlV0fA]]<br />
| Session 2E - Slicing your STL and Viewing your GCODE<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:IQbgGwiGVZA.png|200px| link=https://www.youtube.com/watch?v=IQbgGwiGVZA]]<br />
| Session 2C - Positioning, Scaling, and Rotating your STL<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:mVyCq7CPGLg.png|200px| link=https://www.youtube.com/watch?v=mVyCq7CPGLg]]<br />
| Session 1A - Hardware and Software Overview<br />
| Any<br />
| Overview<br />
|-<br />
! [[File:2tIHw_JIQAI.png|200px| link=https://www.youtube.com/watch?v=2tIHw_JIQAIv]]<br />
| Session 1B - Communications and Bed Leveling<br />
| 30M, ESR<br />
| Setup<br />
|-<br />
! [[File:lFATCfKJf4I.png|200px| link=https://www.youtube.com/watch?v=lFATCfKJf4I]]<br />
| Session 1C - Printing with Plasticine<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:2yHRuef29L4.png|200px| link=https://www.youtube.com/watch?v=2yHRuef29L4]]<br />
| Session 2A: Simple CAD Modeling in FreeCAD<br />
| Any<br />
| Software<br />
|-<br />
! [[File:RlJqdhtpB6Q.png|200px| link=https://www.youtube.com/watch?v=RlJqdhtpB6Q]]<br />
| PC to Printer Connectivity<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:C88ni0huwhw.png|200px| link=https://www.youtube.com/watch?v=C88ni0huwhw]]<br />
| Using the Spindle Tool to rework Circuit Boards<br />
| Any<br />
| Spindle<br />
|-<br />
! [[File:KIGeQmXNbNE.png|200px| link=https://www.youtube.com/watch?v=KIGeQmXNbNE]]<br />
| Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software<br />
| n/a<br />
| Manufacturing<br />
|-<br />
! [[File:ImMo3V1D70w.png|200px| link=https://www.youtube.com/watch?v=ImMo3V1D70w]]<br />
| Table Arm (X-Arm) Block Adjustment<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:yaCYFmoIESk.png|200px| link=https://www.youtube.com/watch?v=yaCYFmoIESk]]<br />
| MK1-250 Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:UvZMecXsHEM.png|200px| link=https://www.youtube.com/watch?v=UvZMecXsHEM]]<br />
| MK1-450 Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:SOGKeU3vLbs.png|200px| link=https://www.youtube.com/watch?v=SOGKeU3vLbs]]<br />
| MK2-250 Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:FkJT3ILlAHw.png|200px| link=https://www.youtube.com/watch?v=FkJT3ILlAHw]]<br />
| Replacing the 30M/ESR Heated Build Platform<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:3KwJ6OgOx14.png|200px| link=https://www.youtube.com/watch?v=3KwJ6OgOx14]]<br />
| Multi Head Printing - Nested STLs<br />
| Any<br />
| Software<br />
|-<br />
! [[File:4GYWfMrs0F8.png|200px| link=https://www.youtube.com/watch?v=4GYWfMrs0F8]]<br />
| X-Axis Belt Tightening <br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:IkgviAGep-c.png|200px| link=https://www.youtube.com/watch?v=IkgviAGep-c]]<br />
| Y-Axis Belt Tightening<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:lQy25Nlj3_Q.png|200px| link=https://www.youtube.com/watch?v=lQy25Nlj3_Q]]<br />
| Plasma Magnetic Vortex Deposition (ElectroSpinning)<br />
| EHR<br />
| Electro (Melt) Spinning<br />
|-<br />
! [[File:LQb5vS97jFo.png|200px| link=https://www.youtube.com/watch?v=LQb5vS97jFo]]<br />
| 3D Milling on the Hydra Series<br />
| Hydra<br />
| Spindle<br />
|-<br />
! [[File:81sVBZOOcbw.png|200px| link=https://www.youtube.com/watch?v=81sVBZOOcbw]]<br />
| Introducing the Hydra 640 (formerly Model 16A)<br />
| Hydra<br />
| Overview<br />
|-<br />
! [[File:uPqr4S0WC3Q.png|200px| link=https://www.youtube.com/watch?v=uPqr4S0WC3Q]]<br />
| USBB Jumper Instructions<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:Rw2E_d-q9bQ.png|200px| link=https://www.youtube.com/watch?v=Rw2E_d-q9bQ]]<br />
| Size Does Matter<br />
| Hydra<br />
| Overview<br />
|-<br />
! [[File:xGriCCrfkuw.png|200px| link=https://www.youtube.com/watch?v=xGriCCrfkuw]]<br />
| Print Heads Overview<br />
| Any<br />
| All<br />
|-<br />
! [[File:QMyuKdgiWI4.png|200px| link=https://www.youtube.com/watch?v=QMyuKdgiWI4]]<br />
| Session 2F - Loading and Printing with Filaments, MK-Series Heads<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:ysO8oAzFwC4.png|200px| link=https://www.youtube.com/watch?v=ysO8oAzFwC4]]<br />
| MK1-250 PEEK Nozzle Assembly<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:BoHRC9m5nlQ.png|200px| link=https://www.youtube.com/watch?v=BoHRC9m5nlQ]]<br />
| New Hydra Printer Line Intro<br />
| Hydra<br />
| Overview<br />
|-<br />
! [[File:XREWb_Md5o0.png| link=https://www.youtube.com/watch?v=XREWb_Md5o0]]<br />
| Bioplotting for under $10K<br />
| EHR<br />
| Introduction<br />
|-<br />
! [[File:9zxxBYbdlOE.png|200px| link=https://www.youtube.com/watch?v=9zxxBYbdlOE]]<br />
| Programming Head Offsets<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:nfIvS50zLyc.png|200px| link=https://www.youtube.com/watch?v=nfIvS50zLyc]]<br />
| Slicing for a Two-Material Print<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:0dS3bC0BnRQ.png|200px| link=https://www.youtube.com/watch?v=0dS3bC0BnRQ]]<br />
| Loading Filament and Printing with the Hyrel3D MK2-250<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:v2ifSlZ0qEw.png|200px| link=https://www.youtube.com/watch?v=v2ifSlZ0qEw]]<br />
| Loading Filament and Printing with the Hyrel3D MK1-250<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:q-DbAbNMW48.png|200px| link=https://www.youtube.com/watch?v=q-DbAbNMW48]]<br />
| Loading and Printing with the EMO-25 Print Head<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:ej55bZXrltA.png|200px| link=https://www.youtube.com/watch?v=ej55bZXrltA]]<br />
| SDS RTV Instructions, v2<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:MwrhV74NjCQ.png|200px| link=https://www.youtube.com/watch?v=MwrhV74NjCQ]]<br />
| Intro to Hyrel Possibilities - Jan 2016<br />
| All<br />
| Overview<br />
|-<br />
! [[File:V_zCytnGvvo.png|200px| link=https://www.youtube.com/watch?v=V_zCytnGvvo]]<br />
| MK2-250 Dual Drive for Flexible Filaments<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:O1IGa-8y9yQ.png|200px| link=https://www.youtube.com/watch?v=O1IGa-8y9yQ]]<br />
| 6w, 450nm Laser Test<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:0JJp7HeK35M.png|200px| link=https://www.youtube.com/watch?v=0JJp7HeK35M]]<br />
| SDS RTV Instructions, v1<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:XKHa1CXnSdI.png|200px| link=https://www.youtube.com/watch?v=XKHa1CXnSdI]]<br />
| Introducing the SDS Print Heads<br />
| Any<br />
| SDS<br />
|-<br />
! [[File:BlSGlOpyipI.png|200px| link=https://www.youtube.com/watch?v=BlSGlOpyipI]]<br />
| Sneak Peek: Pick and Place Prototype<br />
| Hydra<br />
| Pick-and-Place<br />
|-<br />
|}<br />
<br />
=== 2012-2015 (43) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2012-2015<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:OceUiuTixPA.png|200px|link=https://www.youtube.com/watch?v=OceUiuTixPA]]<br />
| LA6-450: 6w, 450nm Diode Laser Head<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:vmw0LS_f9V0E.png|200px|link=https://www.youtube.com/watch?v=vmw0LS_f9V0]]<br />
| 3D Printing RTV Silicone<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:YWe3TQGgNW0.png|200px|link=https://www.youtube.com/watch?v=YWe3TQGgNW0]]<br />
| Loading the VCD-25<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:huJuexTLbYA.png|200px|link=https://www.youtube.com/watch?v=huJuexTLbYA]]<br />
| Short Porcelain Print Demo<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:b583I7AlGJI.png|200px|link=https://www.youtube.com/watch?v=b583I7AlGJI]]<br />
| Replacing the Tablet Interface Board<br />
| 30M<br />
| Maintenance<br />
|-<br />
! [[File:ZKAzXoJ0q8Y.png|200px|link=https://www.youtube.com/watch?v=ZKAzXoJ0q8Y]]<br />
| 2016 Design Contest Video<br />
| N/A<br />
| Contest<br />
|-<br />
! [[File:YRsyEGHyt3k.png|200px|link=https://www.youtube.com/watch?v=YRsyEGHyt3k]]<br />
| DXF to Laser Gcode Generation<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:Om9cjxMXuxY.png|200px|link=https://www.youtube.com/watch?v=Om9cjxMXuxY]]<br />
| Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:IreaoCfQ8mE.png|200px|link=https://www.youtube.com/watch?v=IreaoCfQ8mE]]<br />
| Healing with MeshLab<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:0Aj9WCabPgw.png|200px|link=https://www.youtube.com/watch?v=0Aj9WCabPgw]]<br />
| Postprocessing with a Heat Gun<br />
| Any<br />
| Postprocessing<br />
|-<br />
! [[File:4oxCqR_DVNQ.png|200px|link=https://www.youtube.com/watch?v=4oxCqR_DVNQ]]<br />
| Introduction to Hyrel 3D Possibilities, 2015<br />
| All<br />
| All<br />
|-<br />
! [[File:n4QwiuQtjO0.png|200px|link=https://www.youtube.com/watch?v=n4QwiuQtjO0]]<br />
| Updating to Repetrel 2 4xx<br />
| Any<br />
| Software<br />
|-<br />
! [[File:cFAFRkpLmww.png|200px|link=https://www.youtube.com/watch?v=cFAFRkpLmww]]<br />
| Updating your 407 Motion Controller<br />
| All<br />
| Software<br />
|-<br />
! [[File:XKCEkKSolZc.png|200px|link=https://www.youtube.com/watch?v=XKCEkKSolZc]]<br />
| Replacing the HOTHEAD controller<br />
| Any<br />
| Any<br />
|-<br />
! [[File:YM8QMZBTb4o.png|200px|link=https://www.youtube.com/watch?v=yM8QMZBTb4o]]<br />
| Programming the HOTBED controller on the System 30M and ESR<br />
| 30M, ESR<br />
| Software<br />
|-<br />
! [[File:CuRcIE-Jbyc.jpg|200px|link=https://www.youtube.com/watch?v=cuRcIE-Jbyc]]<br />
| Printing with Cloning - three heads in Parallel<br />
| Any<br />
| Any<br />
|-<br />
! [[File:VMyS3h4qiSA.jpg|200px|link=https://www.youtube.com/watch?v=VMyS3h4qiSA]]<br />
| Older Instructions, Slicing for Multiple Head Support<br />
| printer<br />
| head<br />
|-<br />
! [[File:0gFX6Mh-ths.png|200px|link=https://www.youtube.com/watch?v=0gFX6Mh-ths]]<br />
| Leveling the X-Arm on System 30M, Engine SR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:LZd0ecogGlQ.png|200px|link=https://www.youtube.com/watch?v=LZd0ecogGlQ]]<br />
| Correcting Y-Arm Flexation Fix on the System 30M, Engine SR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:ArDX4UpflmE.png|200px|link=https://www.youtube.com/watch?v=ArDX4UpflmE]]<br />
| Manually Setting the Z-Zero Position<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:vc9gBZtUL7c.png|200px|link=https://www.youtube.com/watch?v=vc9gBZtUL7c]]<br />
| Picking Right 3D Printer For You<br />
| All<br />
| All<br />
|-<br />
! [[File:66S9XJ-KeU8.png|200px|link=https://www.youtube.com/watch?v=66S9XJ-KeU8]]<br />
| Changing the Main I/O Board, System 30M, ESR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:YEePz8_0ttc.png|200px|link=https://www.youtube.com/watch?v=yEePz8_0ttc]]<br />
| Laser Test Print<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:tLHpaePTP-k.png|200px|link=https://www.youtube.com/watch?v=tLHpaePTP-k]]<br />
| EMO Series Printing Tips<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:Zl1sqy6PWx8.jpg|200px|link=https://www.youtube.com/watch?v=Zl1sqy6PWx8]]<br />
| Changing Power Supplies in the 30M and ESR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:IQscrgv6uaQ.png|200px|link=https://www.youtube.com/watch?v=IQscrgv6uaQ]]<br />
| Multi-Head Calibration Guide<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:0lpa4nENtyQ.png|200px|link=https://www.youtube.com/watch?v=0lpa4nENtyQ]]<br />
| LA5-808 "Shark V" Diode Laser<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:mPYPWjnDGho.png|200px|link=https://www.youtube.com/watch?v=mPYPWjnDGho]]<br />
| Luer Tip Kit for EMO and SDS Series Print Heads<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:-VHxf182fIs.png|200px|link=https://www.youtube.com/watch?v=-VHxf182fIs]]<br />
| Print Head SDK<br />
| Any<br />
| New!<br />
|-<br />
! [[File:Fg9omXlYR-Q.png|200px|link=https://www.youtube.com/watch?v=Fg9omXlYR-Q]]<br />
| MK Series Printing Tips<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:SoY9uOw3nCM1.png|200px|link=https://www.youtube.com/watch?v=Fg9omXlYR-Q]]<br />
| Leveling the beds on VERY OLD ESR and 30M machines.<br />
| ESR/30M<br />
| Any<br />
|-<br />
! [[File:EosKDe-SyUI.png|200px|link=https://www.youtube.com/watch?v=soY9uOw3nCM]]<br />
| Replacing fuses (old) on the Yoke<br />
| Any<br />
| Maintenance<br />
|-<br />
! [[File:4yuzpUqeE-Y.png|200px|link=https://www.youtube.com/watch?v=4yuzpUqeE-Y]]<br />
| Loading the EMO-type Reservoirs<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:xQFacnpzmv0.png|200px|link=https://www.youtube.com/watch?v=xQFacnpzmv0]]<br />
| Changing the Economics of 3D Printing<br />
| Any<br />
| Any<br />
|-<br />
! [[File:c9HvQ3SepoM.png|200px|link=https://www.youtube.com/watch?v=c9HvQ3SepoM]]<br />
| System 30M Product Release<br />
| 30M<br />
| Introduction<br />
|-<br />
! [[File:P6aMBQSZPgg.png|200px|link=https://www.youtube.com/watch?v=P6aMBQSZPgg]]<br />
| Simultaneous 3D Printing of Multiple Parts<br />
| Any<br />
| Any<br />
|-<br />
! [[File:nuii5rP53Js.png|200px|link=https://www.youtube.com/watch?v=nuii5rP53Js]]<br />
| 3D Printing with Sugru The Amazing Self-Setting Rubber<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:dihvAQR7LQg.png|200px|link=https://www.youtube.com/watch?v=dihvAQR7LQg]]<br />
| 3D Printing with Play-Doh<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:cw8XiW46G0k.png|200px|link=https://www.youtube.com/watch?v=cw8XiW46G0k]]<br />
| 3D Printing with Plasticine<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:trdz4YDbdsw.png|200px|link=https://www.youtube.com/watch?v=trdz4YDbdsw]]<br />
| 3D Printing with Air-Dry Modeling Clay<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:XNwv7Dw_Zwg.png|200px|link=https://www.youtube.com/watch?v=XNwv7Dw_Zwg]]<br />
| Interchangeable Hot-Swappable Heads<br />
| Any<br />
| Any<br />
|-<br />
! [[File:mu9xMmkZFns.png|200px|link=https://www.youtube.com/watch?v=mu9xMmkZFns]]<br />
| Thank you, Kickstarters!<br />
| Any<br />
| Any<br />
|-<br />
! [[File:Z9rgkw5r4l4.png|200px|link=https://www.youtube.com/watch?v=Z9rgkw5r4l4]]<br />
| Quick Tour of our Main Shop!<br />
| Any<br />
| Any<br />
|-<br />
|}</div>Davohttps://hyrel3d.com/wiki/index.php?title=Videos&diff=7772Videos2024-03-12T18:38:58Z<p>Davo: /* 2023 (11) */</p>
<hr />
<div>[[Category:HowTo]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== Table of Videos ==<br />
<br />
Please also see:<br />
<br />
* The '''[[Instructions]]''' page <br />
* The '''[[Help]]''' page<br />
* The '''[[FAQs]]''' page<br />
* The '''[[How_do_I...]]''' page<br />
<br />
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.<br />
<br />
Note:<br />
<br />
The following chart compares and contrasts the various printers:<br />
<br />
https://hyrel3d.com/wiki/index.php/Printer_Overview<br />
<br />
The following chart compares and contrasts the various heads:<br />
<br />
https://hyrel3d.com/wiki/index.php/Head_Overview<br />
<br />
=== Count ===<br />
<br />
292 videos as of Feb 2024.<br />
<br />
=== 2024 (3) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2021<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:1gtfdQCLGacQ.png|200px|link=https://www.youtube.com/watch?v=gtfdQCLGacQ]]<br />
| Slicing a DXF to etch with a Hyrel 3D Diode Laser<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:1y5nrlOKWK6M.png|200px|link=https://www.youtube.com/watch?v=y5nrlOKWK6M]]<br />
| Hyrel3D: HEATED Small Volume Mixing Kit (SVMK) setup<br />
| Any<br />
| Reservoir<br />
|-<br />
! [[File:PsaduGKoLJw.png|200px|link=https://www.youtube.com/watch?v=PsaduGKoLJw]]<br />
| Hyrel 3D: Dual RSD instructions<br />
| Any<br />
| Reservoir<br />
|-<br />
|}<br />
<br />
=== 2023 (11) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2023<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:U1RRO7YDT4M.png|200px|link=https://www.youtube.com/watch?v=u1RRO7YDT4M]]<br />
| 75mm tall PPSU part printed on Hydra 21<br />
| H21<br />
| Filament<br />
|-<br />
! [[File:6g4C8rsn3Ks.png|200px|link=https://www.youtube.com/watch?v=6g4C8rsn3Ks]]<br />
| Configuring the Hyrel 3D RSD-30 head (heating and cooling)<br />
| Any<br />
| RSD-30<br />
|-<br />
! [[File:TJR_xZNTRHM.png|200px|link=https://www.youtube.com/watch?v=tJR_xZNTRHM]]<br />
| Hyrel 3D use at Universidad Autónoma de Occidente, Columbia<br />
| 30M<br />
| Various<br />
|-<br />
! [[File:W33CN9IGQiY.png|200px|link=https://www.youtube.com/watch?v=W33CN9IGQiY]]<br />
| Drying and Preheating filament with an air fryer<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:H_PQNuxNNJ8.png|200px|link=https://www.youtube.com/watch?v=H_PQNuxNNJ8]]<br />
| Closed-loop Bio Dispensing on a Scale with 1.5% accuracy<br />
| Any<br />
| head_activity<br />
|-<br />
! [[File:6g4C8rsn3Ks.png|200px|link=https://www.youtube.com/watch?v=6g4C8rsn3Ks&ab_channel=Hyrel3D]]<br />
| RSD-30 Configuration<br />
| Any<br />
| SDS<br />
|-<br />
! [[File:ETKVKX4PIBA.png|200px|link=https://www.youtube.com/shorts/ETKVKX4PIBA]]<br />
| New Chuwi Tablet Installation<br />
| 30M<br />
| Tablet<br />
|-<br />
! [[File:1foqRMFgVjM8.png|200px|link=https://www.youtube.com/watch?v=foqRMFgVjM8]]<br />
| Slicing and printing TPU on a Hyrel 3D printer<br />
| All<br />
| FH2<br />
|-<br />
! [[File:1pF2_ZCXF_7w.png|200px|link=https://www.youtube.com/watch?v=pF2_ZCXF_7w]]<br />
| Hyrel 3D's new 300cc bulk feeder heads for liquids, gels, pastes.<br />
| All<br />
| EMO-300XT<br />
|-<br />
! [[File:1mDlVP7HDVLw.png|200px|link=https://www.youtube.com/watch?v=mDlVP7HDVLw]]<br />
| Hyrel 3D: Heated Pneumatic Syringe Head Intro<br />
| All<br />
| 2HN-PNU*<br />
|-<br />
! [[File:6inSx0kMIEk.png|200px|link=https://www.youtube.com/watch?v=6inSx0kMIEk]]<br />
| New-style Pick-and-Place Head Introduction<br />
| H21<br />
| PNP<br />
|-<br />
|}<br />
<br />
=== 2022 (23) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2022<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:1sKF45LSvIU.png|200px|link=https://www.youtube.com/watch?v=1sKF45LSvIU]]<br />
| Hyrel3D Bioprinting at the Food and Bioengineering Lab of TalTech, Estonia<br />
| EHR<br />
| Printing<br />
|-<br />
! [[File:T2R3cuBm0S8.png|200px|link=https://www.youtube.com/watch?v=T2R3cuBm0S8]]<br />
| Additional Setup for new printers<br />
| All<br />
| n/a<br />
|-<br />
! [[File:SaCESWMzTzU.png|200px|link=https://www.youtube.com/watch?v=saCESWMzTzU]]<br />
| Technical University of Denmark printing on a Hyrel 3D Printer<br />
| ESR<br />
| Printing<br />
|-<br />
! [[File:Mprt_AHMJrQ.png|200px|link=https://www.youtube.com/watch?v=Mprt_AHMJrQ]]<br />
| Creating Text Objects with Repetrel<br />
| All<br />
| n/a<br />
|-<br />
! [[File:T0Sjq4gWLs0.png|200px|link=https://www.youtube.com/watch?v=t0Sjq4gWLs0]]<br />
| New Small Volume Mixing Kit<br />
| Any<br />
| SVMK, Microfluidics<br />
|-<br />
! [[File:FvAWmbVkBxE.png|200px|link=https://www.youtube.com/watch?v=FvAWmbVkBxE]]<br />
| Integrating MATLAB with Repetrel<br />
| Any<br />
| Any<br />
|-<br />
! [[File:6PqZkRNnbuI.png|200px|link=https://www.youtube.com/watch?v=6PqZkRNnbuI]]<br />
| Adjusting to avoid Elephant Foot with PCL and similar materials<br />
| Any<br />
| KR2, TAM<br />
|-<br />
! [[File:8oTzRYFHFy0.png|200px|link=https://www.youtube.com/watch?v=8oTzRYFHFy0]]<br />
| Hyrel head lowering attachment<br />
| Any<br />
| Any<br />
|-<br />
! [[File:RMVCPDqZamI.png|200px|link=https://www.youtube.com/watch?v=rMVCPDqZamI]]<br />
| Cleaning residue from the HIgh Torque KR2 cartridge<br />
| Any<br />
| HTK<br />
|-<br />
! [[File:ZcLTrAIVWh8.png|200px|link=https://www.youtube.com/watch?v=zcLTrAIVWh8]]<br />
| Scaling your print with the Hyrel Microscope<br />
| Any<br />
| Microscope<br />
|-<br />
! [[File:HSUTLFg41cI.png|200px|link=https://www.youtube.com/watch?v=rMVCPDqZamI]]<br />
| Cleaning PCL, PLA, or PDO residue the Hyrel HTK cartridge of the KR2 head.<br />
| Any<br />
| Cleanup<br />
|-<br />
! [[File:M9WznRpnLY8.png|200px|link=https://www.youtube.com/watch?v=M9WznRpnLY8]]<br />
| Using head offsets to change tool positions while leaving the output in the same location<br />
| Any<br />
| Calibration<br />
|-<br />
! [[File:CM9AwdiZQ2M.png|200px|link=https://www.youtube.com/watch?v=cM9AwdiZQ2M]]<br />
| Demo setup and test: Pick-and-Place<br />
| H21<br />
| Configuration<br />
|-<br />
! [[File:N1HVzUgp5hU.png|200px|link=https://www.youtube.com/watch?v=N1HVzUgp5hU]]<br />
| EHR Position Adjustment <br />
| EHR<br />
| Calibration<br />
|-<br />
! [[File:PRvXvj02wdU.png|200px|link=https://www.youtube.com/watch?v=pRvXvj02wdU]]<br />
| Analyzing and calculating the porosity of scaffolds - Hyrel 3D<br />
| Any<br />
| Scaffolds<br />
|-<br />
! [[File:CoPUoa5knws.png|200px|link=https://www.youtube.com/watch?v=CoPUoa5knws]]<br />
| Replacing big tree board on Z motor on Hydra 21.<br />
| H21<br />
| Maintenance<br />
|-<br />
! [[File:ZcsDLxkzio8.png|200px|link=https://www.youtube.com/watch?v=zcsDLxkzio8]]<br />
| How to prepare powdered material for use in Hyrel 3D's heated syringe heads. <br />
| All<br />
| Bio<br />
|-<br />
! [[File:NQn0MgFGswE.png|200px|link=https://www.youtube.com/watch?v=NQn0MgFGswE]]<br />
| How to level the build platform on the new Hyrel 3D Hydra 21 printer. <br />
| H21<br />
| Maintenance<br />
|-<br />
! [[File:R5NerkHj1aY.png|200px|link=https://www.youtube.com/watch?v=R5NerkHj1aY]]<br />
| How to measure the scale of biological scaffold prints.<br />
| All<br />
| Bio<br />
|-<br />
! [[File:KPSnNNQ3Mao.png|200px|link=https://www.youtube.com/watch?v=KPSnNNQ3Mao]]<br />
| How to melt and print with PCL pellets with the Hyrel KR2 head.<br />
| All<br />
| Bio<br />
|-<br />
! [[File:0uU5M8bwkDU.png|200px|link=https://www.youtube.com/watch?v=0uU5M8bwkDU]]<br />
| How to remove PCL scaffolds from PVC build surface.<br />
| All<br />
| Bio<br />
|-<br />
! [[File:FTPT0TiFSJw.png|200px|link=https://www.youtube.com/watch?v=FTPT0TiFSJw]]<br />
| Hydra 21 Unboxing Instructions<br />
| H21<br />
| All<br />
|-<br />
! [[File:FB4Sy0HFy8.png|200px|link=https://www.youtube.com/watch?v=_fB4Sy0HFy8]]<br />
| Cirles, Arcs, Spirals, and Helixes: Hyrel's G2 and G3 gcode generation tool<br />
| All<br />
| All<br />
|-<br />
|}<br />
<br />
=== 2021 (44) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2021<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:Ah_UguF8cNg.png|200px|link=https://www.youtube.com/watch?v=ah_UguF8cNg]]<br />
| Scaffolds: Adjusting the flow value (P/uL)<br />
| All<br />
| All<br />
|-<br />
! [[File:CT-4Sk2DBMw.png|200px|link=https://www.youtube.com/watch?v=cT-4Sk2DBMw]]<br />
| Scaffolds: Adjusting the final retract (unprime)<br />
| All<br />
| All<br />
|-<br />
! [[File:MbLeyEoBXek.png|200px|link=https://www.youtube.com/watch?v=mbLeyEoBXek]]<br />
| Scaffold Gradient: Speed and Z position Instructions<br />
| All<br />
| All<br />
|-<br />
! [[File:AcVa5mrdjFQ.png|200px|link=https://www.youtube.com/watch?v=AcVa5mrdjFQ]]<br />
| Scaffold Gradient: Speed Instructions<br />
| All<br />
| All<br />
|-<br />
! [[File:VBAFH6J5-to.png|200px|link=https://www.youtube.com/watch?v=vBAFH6J5-to]]<br />
| Scaffold Perimeters Tool<br />
| All<br />
| All<br />
|-<br />
! [[File:HT0i3EP4HBM.png|200px|link=https://www.youtube.com/watch?v=hT0i3EP4HBM]]<br />
| Customizing Visualization in Repetrel<br />
| All<br />
| All<br />
|-<br />
! [[File:Be-4iCfWM8s.png|200px|link=https://www.youtube.com/watch?v=be-4iCfWM8s]]<br />
| Biogel Scaffold Speed Test<br />
| All<br />
| All<br />
|-<br />
! [[File:CEW_RQqCDPM.png|200px|link=https://www.youtube.com/watch?v=cEW_RQqCDPM]]<br />
| Programming BigTree Drivers for Hyrel Printers<br />
| All<br />
| Flashing<br />
|-<br />
! [[File:P0G0uKOokJ8.png|200px|link=https://www.youtube.com/watch?v=p0G0uKOokJ8]]<br />
| Using a USB Camera with Repetrel<br />
| All<br />
| Camera<br />
|-<br />
! [[File:GjIXmTDOg5E.png|200px|link=https://www.youtube.com/watch?v=gjIXmTDOg5E]]<br />
| Heated Nozzle Accessory<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:Onnl10Ea1tQ.png|200px|link=https://www.youtube.com/watch?v=Onnl10Ea1tQ]]<br />
| Scaffold Options in Repetrel<br />
| All<br />
| All<br />
|-<br />
! [[File:QnvzDbYEFfA.png|200px|link=https://www.youtube.com/watch?v=qnvzDbYEFfA]]<br />
| Cleaning the Hyrel 3D DMH-2 Dynamic Mixing Head<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:3KLIdStlvwU.png|200px|link=https://www.youtube.com/watch?v=3KLIdStlvwU]]<br />
| Calibrating Head Offsets for Hyrel 3D<br />
| All<br />
| All<br />
|-<br />
! [[File:BZBItYywCjM.png|200px|link=https://www.youtube.com/watch?v=bZBItYywCjM]]<br />
| Hyrel 3D "Return Trip" Option for Scaffolds<br />
| All<br />
| Zebra Prints<br />
|-<br />
! [[File:TKa3gzb18qk.png|200px|link=https://www.youtube.com/watch?v=tKa3gzb18qk]]<br />
| Hyrel 3D Viscosity Test Clean Up<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:S_CGzgx0NMM.png|200px|link=https://www.youtube.com/watch?v=S_CGzgx0NMM]]<br />
| Hyrel 3D's Coaxial Extrusion Head with Nozzle Heater<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:P28Y7NNT3DQ.png|200px|link=https://www.youtube.com/watch?v=P28Y7NNT3DQ]]<br />
| Configuring "Zebra" prints in Repetrel on Hyrel 3D Printers<br />
| All<br />
| Zebra Prints<br />
|-<br />
! [[File:DX1fBX51XNI.png|200px|link=https://www.youtube.com/watch?v=dX1fBX51XNI]]<br />
| Designing Scaffolds in Repetrel<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:St6nehNLTdc.png|200px|link=https://www.youtube.com/watch?v=St6nehNLTdc]]<br />
| Resolving a stuck plunger in a Hyrel 3D reservoir head<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:AtQuLaYVGzA.png|200px|link=https://www.youtube.com/watch?v=AtQuLaYVGzA]]<br />
| Hyrel 3D Announces Polar Printing for Extreme Environments!<br />
| Polar<br />
| All<br />
|-<br />
! [[File:ADqB1DjM9Ug.png|200px|link=https://www.youtube.com/watch?v=aDqB1DjM9Ug]]<br />
| Eliminating air bubbles in a Hydrogel<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:MbyRncFmpyg.png|200px|link=https://www.youtube.com/watch?v=MbyRncFmpyg]]<br />
| Cleaning Hyrel 3D's DMH-2 Dynamic Mixing Head<br />
| All<br />
| DMH-2<br />
|-<br />
! [[File:JvenAK33OmI.png|200px|link=https://www.youtube.com/watch?v=JvenAK33OmI]]<br />
| How to echo gcode commands to the display <br />
| All<br />
| Usage<br />
|-<br />
! [[File:Hd4iq3HR9c8.png|200px|link=https://www.youtube.com/watch?v=Hd4iq3HR9c8]]<br />
| Removing PCL Prints Faster and Easier<br />
| All<br />
| PCL<br />
|-<br />
! [[File:Hcxd5uonkxE.png|200px|link=https://www.youtube.com/watch?v=hcxd5uonkxE]]<br />
| Overview of the Hyrel 3D "Quiet Storm" Additional Cooling Fan<br />
| All<br />
| Quiet Storm<br />
|-<br />
! [[File:V5cKuYY1PAw.png|200px|link=https://www.youtube.com/watch?v=V5cKuYY1PAw]]<br />
| Preparation and Setup for Printing PCL (polycaprolactone)<br />
| All<br />
| PCL<br />
|-<br />
! [[File:7ozTI_eiFqk.png|200px|link=https://www.youtube.com/watch?v=7ozTI_eiFqk]]<br />
| Choosing and Specifying Parameters for Rectangular Infill Scaffolds<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:Dfm8RYyzmas.png|200px|link=https://www.youtube.com/watch?v=dfm8RYyzmas]]<br />
| Choosing and Specifying Parameters for Gyroid Infill PCL Scaffolds<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:ASy9HIwz04Q.png|200px|link=https://www.youtube.com/watch?v=aSy9HIwz04Q]]<br />
| Showing the Effects of Cooling while Printing<br />
| All<br />
| Cooling<br />
|-<br />
! [[File:A4bXqRb5-q8.png|200px|link=https://www.youtube.com/watch?v=A4bXqRb5-q8]]<br />
| How to manage Accessory Manuals in Repetrel<br />
| All<br />
| Usage<br />
|-<br />
! [[File:EXMxgF-Yf1o.png|200px|link=https://www.youtube.com/watch?v=eXMxgF-Yf1o]]<br />
| Saving, Naming and Reusing Scaffolds<br />
| All<br />
| Scaffolds<br />
|-<br />
! [[File:3H-gJNUDncA.png|200px|link=https://www.youtube.com/watch?v=3H-gJNUDncA]]<br />
| How to work with our Heated Nozzle Accessory<br />
| All<br />
| Heated Nozzles<br />
|-<br />
! [[File:DXjh36CcRAw.png|200px|link=https://www.youtube.com/watch?v=DXjh36CcRAw]]<br />
| Using Filters to refine SurferBuddy search results<br />
| All<br />
| SurferBuddy<br />
|-<br />
! [[File:JQCcelqLoQE.png|200px|link=https://www.youtube.com/watch?v=jQCcelqLoQE]]<br />
| How to Export SurferBuddy Files to External Drive 1<br />
| All<br />
| SurferBuddy<br />
|-<br />
! [[File:EqoyARWTTLo.png|200px|link=https://www.youtube.com/watch?v=EqoyARWTTLo]]<br />
| Using Parameter Profiles in Repetrel <br />
| All<br />
| Parameter Profiles<br />
|-<br />
! [[File:NbfntNBKSIg.png|200px|link=https://www.youtube.com/watch?v=NbfntNBKSIg]]<br />
| How to Export GCODE from Repetrel<br />
| All<br />
| Usage<br />
|-<br />
! [[File:5lYDLhbnQxE.png|200px|link=https://www.youtube.com/watch?v=5lYDLhbnQxE]]<br />
| Using offsets to repeat a job in different locations<br />
| All<br />
| Offsets<br />
|-<br />
! [[File:3tRDj7y54SU.png|200px|link=https://www.youtube.com/watch?v=3tRDj7y54SU]]<br />
| Custom screeding attachment for the Hyrel Hydra <br />
| 16A<br />
| Calibration<br />
|-<br />
! [[File:JljdH1V4ips.png|200px|link=https://www.youtube.com/watch?v=jljdH1V4ips]]<br />
| Hyrel Nozzle Heater for Reservoir Heads<br />
| All<br />
| Reservoir<br />
|-<br />
! [[File:Qqh2Y0Wg9HA.png|200px|link=https://www.youtube.com/watch?v=qqh2Y0Wg9HA]]<br />
| Unboxing the Hyrel EHR for electro-spinning or melt-electro-writing (MEW)<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:Calibrate.png|200px|link=https://www.youtube.com/watch?v=93fE6I8L_Z0]]<br />
| Calibrating Travel on the EHR<br />
| EHR<br />
| Calibration<br />
|-<br />
! [[File:Unpack.png|200px|link=https://www.youtube.com/watch?v=BZjoNhQcYb8]]<br />
| Unpacking and Setting Up the EHR<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:VjZlZkBt130.png|200px|link=https://www.youtube.com/watch?v=vjZlZkBt130]]<br />
| How to check if your CO2 Laser is working<br />
| Hydra<br />
| Lasers<br />
|-<br />
! [[File:SDqVHXZxrBI.png|200px|link=https://www.youtube.com/watch?v=sDqVHXZxrBI]]<br />
| Etching Aluminum with 450 nm Diode Laser<br />
| any<br />
| Lasers<br />
|-<br />
! [[File:9BKE469eL0M.png|200px|link=https://www.youtube.com/watch?v=9BKE469eL0M]]<br />
| Heated and Chilled Vacuum Bed (HCVB)<br />
| EHR, 16A<br />
| Reservoir<br />
|-<br />
|}<br />
<br />
=== 2020 (30) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2020<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:NW-O76oAlu4.png|200px|link=https://www.youtube.com/watch?v=NW-O76oAlu4]]<br />
| The Hyrel Hydra Electrical Panel, Explained<br />
| 16A<br />
| Overview<br />
|-<br />
|-<br />
! [[File:SF7UoogD-mg.png|200px|link=https://www.youtube.com/watch?v=SF7UoogD-mg]]<br />
| Making DXFs from Camera Images<br />
| All<br />
| Lasers<br />
|-<br />
! [[File:Vipro.png|200px|https://www.youtube.com/watch?v=_Mr7qEBgu8M]]<br />
| Viscotec Vipro HEAD-3 on Hyrel<br />
| All<br />
| Viscotec<br />
|-<br />
! [[File:LajxuYqTw6o.png|200px|link=https://www.youtube.com/watch?v=IajxuYqTw6o]]<br />
| Explaining the NEW RSD-30<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:IbdUwZyZm3I.png|200px| link=https://www.youtube.com/watch?v=IbdUwZyZm3I]]<br />
| Making DXFs from CAD Models<br />
| All<br />
| Lasers<br />
|-<br />
! [[File:1Rtktf-HeTU.png|200px| link=https://www.youtube.com/watch?v=1Rtktf-HeTU]]<br />
| 4th/5th Axis Installation and Setup<br />
| 16A<br />
| All<br />
|-<br />
! [[File:H8XnGKBEJCc.png|200px| link=https://www.youtube.com/watch?v=H8XnGKBEJCc]]<br />
| 3-Phase Spindle Tool Installation and Setup<br />
| 16A<br />
| Spindles<br />
|-<br />
! [[File:JW1-uhvZ5wM.png|200px| link=https://www.youtube.com/watch?v=JW1-uhvZ5wM]]<br />
| Clench/Pinch Valve Installation and Setup<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:X7J4pTeSq8A.png|200px| link=https://www.youtube.com/watch?v=X7J4pTeSq8A]]<br />
| Dynamic Mixing Head (DMH) Installation and Setup<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:Dlta7KSt3bE.png|200px| link=https://www.youtube.com/watch?v=Dlta7KSt3bE]]<br />
| EHR Electronics Access<br />
| EHR<br />
| Overview<br />
|-<br />
! [[File:H0pAYAraO0Q.png|200px| link=https://www.youtube.com/watch?v=WSwerPx93qA]]<br />
| ESR Unboxing and Setup<br />
| ESR<br />
| Setup<br />
|-<br />
! [[File:DgfeoLZNW6c.png|200px| link=https://www.youtube.com/watch?v=dgfeoLZNW6c]]<br />
| RSD-30 Refrigerated Syringe Dispenser<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:ILEvP8p_JGo.png|200px| link=https://www.youtube.com/watch?v=ILEvP8p_JGo]]<br />
| Printing on PEI<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:7lwJvyBso1k.png|200px| link=https://www.youtube.com/watch?v=7lwJvyBso1k]]<br />
| Printing Cememtitious Materials at TN Tech<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:PX9KFUrSPVk.png|200px| link=https://www.youtube.com/watch?v=pX9KFUrSPVk]]<br />
| Tightening set screws for Hydra X-axis<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:MOexKcvpcEY.png|200px| link=https://www.youtube.com/watch?v=mOexKcvpcEY]]<br />
| Interview on GA Mfg News<br />
| All<br />
| All<br />
|-<br />
! [[File:R7UimNDjNiY.png|200px| link=https://www.youtube.com/watch?v=r7UimNDjNiY]]<br />
| Hyrel V4 Install No. 9: Licensing<br />
| All<br />
| All<br />
|-<br />
! [[File:0CMH61RtSjk.png|200px| link=https://www.youtube.com/watch?v=0CMH61RtSjk]]<br />
| Hyrel V4 Install No. 8: Recipes<br />
| All<br />
| All<br />
|-<br />
! [[File:N1HZOvWKqs8.png|200px| link=https://www.youtube.com/watch?v=N1HZOvWKqs8]]<br />
| Hyrel V4 Install No. 7: Settings<br />
| All<br />
| All<br />
|-<br />
! [[File:9qbUzZM3vtg.png|200px| link=https://www.youtube.com/watch?v=9qbUzZM3vtg]]<br />
| Hyrel V4 Install No. 6`: Firmware<br />
| All<br />
| All<br />
|-<br />
! [[File:-JN_0iLTOk4.png|200px| link=https://www.youtube.com/watch?v=-JN_0iLTOk4]]<br />
| Hyrel V4 Install No. 5: Drivers<br />
| All<br />
| All<br />
|-<br />
! [[File:2BVzTR7ij5Y.png|200px| link=https://www.youtube.com/watch?v=2BVzTR7ij5Y]]<br />
| Hyrel V4 Install No. 4: Repetrel<br />
| All<br />
| All<br />
|-<br />
! [[File:-Dp-4_NdYm8.png|200px| link=https://www.youtube.com/watch?v=-Dp-4_NdYm8]]<br />
| Hyrel V4 Install No. 3: Adobe Reader<br />
| All<br />
| All<br />
|-<br />
! [[File:VH3Fv6jkA54.png|200px| link=https://www.youtube.com/watch?v=VH3Fv6jkA54]]<br />
| Hyrel V4 Install No. 2: Ecosystem Apps<br />
| All<br />
| All<br />
|-<br />
! [[File:OpM-RcDuM5c.png|200px| link=https://www.youtube.com/watch?v=OpM-RcDuM5c]]<br />
| Hyrel V4 Install No. 1: Winrar<br />
| All<br />
| All<br />
|-<br />
! [[File:MdNsQnHy4dQ.png|200px| link=https://www.youtube.com/watch?v=MdNsQnHy4dQ]]<br />
| Hydra 16AT - Tall<br />
| 16A<br />
| All<br />
|-<br />
! [[File:Zh-x9ugJ5nE.png|200px| link=https://www.youtube.com/watch?v=zh-x9ugJ5nE]]<br />
| Hyrel Bulk Feeder for Cementitious Materials<br />
| 16A<br />
| Reservoirs<br />
|-<br />
! [[File:RW7h9z5DW5A.png|200px| link=https://www.youtube.com/watch?v=rW7h9z5DW5A]]<br />
| Using the new Precision Tool Setter on a Hyrel 3D Printer<br />
| 16A<br />
| All<br />
|-<br />
! [[File:E7tQN_63hcc.png|200px| link=https://www.youtube.com/watch?v=E7tQN_63hcc]]<br />
| How to Dial In the Prime and Unprime Settings<br />
| All<br />
| All<br />
|-<br />
! [[File:TlnVUBryBg0.png|200px| link=https://www.youtube.com/watch?v=tlnVUBryBg0]]<br />
| Installing a Second Yoke on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
|}<br />
<br />
=== 2019 (22) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2019<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:S3qw8dAWeNo.png|200px| link=https://www.youtube.com/watch?v=S3qw8dAWeNo]]<br />
| RSD-30 - Refrigerated Syringe Dispenser<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:RAkjF9nLy4M.png|200px| link=https://www.youtube.com/watch?v=rAkjF9nLy4M]]<br />
| Heated & Chilled Vacuum Bed<br />
| 16A, EHR<br />
| HCVB<br />
|-<br />
! [[File:Gl3mbw88fmo.png|200px| link=https://www.youtube.com/watch?v=Gl3mbw88fmo]]<br />
| 4th Axis Fun - Linear and Rotary Printing<br />
| 16A<br />
| All<br />
|-<br />
! [[File:VVhH8hc3olc.png|200px| link=https://www.youtube.com/watch?v=vVhH8hc3olc]]<br />
| CO2 Laser - Installation Instructions<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:SVC5W_DdQ9E.png|200px| link=https://www.youtube.com/watch?v=sVC5W_DdQ9E]]<br />
| Dynamic Mixing Head DMH<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:4oqPbfdD8O0.png|200px| link=https://www.youtube.com/watch?v=4oqPbfdD8O0]]<br />
| Configuring Prusa Slicer for Multi-Material Support<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:DDwGcDgOOQs.png|200px| link=https://www.youtube.com/watch?v=DDwGcDgOOQs]]<br />
| Configuring the Prusa Slicer for Breakaway Support Material<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:AzFY-IqDB_0.png|200px| link=https://www.youtube.com/watch?v=azFY-IqDB_0]]<br />
| TIG Welding on a Hyrel Hydra<br />
| Hydra<br />
| Welding<br />
|-<br />
! [[File:CW77WBv3x0Q.png|200px| link=https://www.youtube.com/watch?v=cW77WBv3x0Q]]<br />
| How to Load Filament into a Hyrel 3D Print Head<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:EMfkmXFuPd0.png|200px| link=https://www.youtube.com/watch?v=EMfkmXFuPd0]]<br />
| Loading Print Heads into your Hyrel 3D Printer<br />
| All<br />
| All<br />
|-<br />
! [[File:XC1zLqYkKsc.png|200px| link=https://www.youtube.com/watch?v=xC1zLqYkKsc]]<br />
| How to Calibrate the Z-Zero Position<br />
| 16A, 30M, ESR<br />
| All<br />
|-<br />
! [[File:0Apq3tlila8.png|200px| link=https://www.youtube.com/watch?v=0Apq3tlila8]]<br />
| Revised 2019: Hyrel 30M Initial Setup<br />
| 30M<br />
| All<br />
|-<br />
! [[File:0MFtqhM6ZKM.png|200px| link=https://www.youtube.com/watch?v=0MFtqhM6ZKM]]<br />
| How to select a Build Surface<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:-4LuhNfbMAo.png|200px| link=https://www.youtube.com/watch?v=-4LuhNfbMAo]]<br />
| How to Tram (level) the Hydra Bed<br />
| 16A<br />
| All<br />
|-<br />
! [[File:C5-NYk06NVc.png|200px| link=https://www.youtube.com/watch?v=C5-NYk06NVc]]<br />
| Laser Marking on a Cylinder<br />
| All<br />
| Lasers<br />
|-<br />
! [[File:PjqDXXPjI4w.png|200px| link=https://www.youtube.com/watch?v=PjqDXXPjI4w]]<br />
| 4th/5th Axis Machining in Brass on a Hyrel Hydra<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:KmkGR7u5D58.png|200px | link=https://www.youtube.com/watch?v=kmkGR7u5D58]]<br />
| Configuring your Hydra for a 3-phase Spindle Tool<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:B0lvN-aPYHI.png|200px| link=https://www.youtube.com/watch?v=B0lvN-aPYHI]]<br />
| 4th/5th Axis Machining on a Hyrel Hydra <br> [http://hyrel3d.com/gcodes/ardes_tube_cap_milling.gcode (this gcode was used)]<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:CmBaHHAfbEo.png|200px| link=https://www.youtube.com/watch?v=CmBaHHAfbEo]]<br />
| Dispensing RTV Silicone on a Hyrel Hydra<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:G526vFi8yWI.png|200px| link=https://www.youtube.com/watch?v=G526vFi8yWI]]<br />
| Machining PTFE (Teflon) on a Hyrel Hydra<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:LfmssRdZwuE.jpg|200px| link=https://www.youtube.com/watch?v=LfmssRdZwuE]]<br />
| Rotating Head Prototype<br />
| 16A<br />
| Filaments<br />
|-<br />
! [[File:YhoMTLGVAbc.png|200px| link=https://www.youtube.com/watch?v=yhoMTLGVAbc]]<br />
| Re-aligning the Gantry on the Hyrel Hydra 16A<br />
| 16A<br />
| All<br />
|-<br />
|}<br />
<br />
=== 2018 (12) ===<br />
<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2018<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:CbxB96oZFGE.jpg|200px|link=https://www.youtube.com/watch?v=CbxB96oZFGE]]<br />
| Installing the new laser Power Supply in a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:KrwOviaCZuw.jpg|200px|link=https://www.youtube.com/watch?v=krwOviaCZuw]]<br />
| Hyrel Tapping Enabled<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:QuIM9XSYMxE.jpg|200px|link=https://www.youtube.com/watch?v=QuIM9XSYMxE]]<br />
| Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra<br />
| 16A<br />
| Spindle<br />
|-<br />
! [[File:Ni56OFo1VvM.jpg|200px|link=https://www.youtube.com/watch?v=ni56OFo1VvM]]<br />
| Improved UV Light Source for more Powerful Crosslinking<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:68oktmbp8r0.png|200px|link=https://www.youtube.com/watch?v=68oktmbp8r0]]<br />
| How to install 4th and 5th Axes on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:7DcqbBzs-ZQ.png|200px|link=https://www.youtube.com/watch?v=7DcqbBzs-ZQ]]<br />
| How to use an additional Yoke on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:VerQRjS3iWE.png|200px|link=https://www.youtube.com/watch?v=VerQRjS3iWE]]<br />
| How to install an additional Yoke on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:jSTmzuuMYvc.png|200px|link=https://www.youtube.com/watch?v=jSTmzuuMYvc]]<br />
| The Filament Dryer<br />
| All<br />
| Filaments<br />
|-<br />
! [[File:lNURH2fRbY0.jpg|200px|link=https://www.youtube.com/watch?v=lNURH2fRbY0]]<br />
| 4th/5th Axes Demo on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:9R6OUMvb.jpg|200px|link=https://www.youtube.com/watch?v=_9R6OUMvb-o]]<br />
| Installing a 4th axis on a Hyrel Hydra<br />
| 16A<br />
| All<br />
|-<br />
! [[File:2QqwfsKgzuQ.jpg|200px|link=https://youtu.be/2QqwfsKgzuQ]]<br />
| Machining hotbeds to under 0.001"<br />
| 16A<br />
| All<br />
|-<br />
! [[File:O1xmXCdj1xE.png|200px|link=https://youtu.be/O1xmXCdj1xE]]<br />
| Setting the Z-Offset on the EHR<br />
| EHR<br />
| All<br />
|}<br />
<br />
=== 2017 (45) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2017<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:KqnjlTSg-20.jpg|200px| link=https://youtu.be/kqnjlTSg-20]]<br />
| CO2 Laser Marking with the Hydra<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:FnYDoNkgOrI.jpg|200px| link=https://youtu.be/FnYDoNkgOrI]]<br />
| Converting a Hydra from Printer to Laser<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:FHqTlcdISIg.jpg|200px| link=https://youtu.be/fHqTlcdISIg]]<br />
| Cutting Nylon Mesh with CO2 Laser on a Hydra<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:NTejDT1B6uQ.jpg|200px| link=https://youtu.be/nTejDT1B6uQ]]<br />
| Chamber Temperature in a Cold Room<br />
| 16A<br />
| Filaments<br />
|-<br />
! [[File:4Y9V6RWhKj4.jpg|200px| link=https://youtu.be/4Y9V6RWhKj4]]<br />
| Cutting acrylic with the CO2 Laser<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:DkMtzPDtIQY.jpg|200px| link=https://youtu.be/dkMtzPDtIQY]]<br />
| Tiny Heated Chilled Bed Preview<br />
| EHR<br />
| Reservoirs<br />
|-<br />
! [[File:GdvyT8HoaOw.jpg|200px| link=https://youtu.be/gdvyT8HoaOw]]<br />
| 4th Axis Rotary Print<br />
| 16A<br />
| Filaments<br />
|-<br />
! [[File:3nKqwcXcEgY.png|200px| link=https://youtu.be/3nKqwcXcEgY]]<br />
| Additive Manufacturing of Toroid and Planar Inductors for Electronics Applications<br />
| 30M, ESR<br />
| Reservoirs<br />
|-<br />
! [[File:Az7V1FSRJfs.jpg|200px| link=https://www.youtube.com/watch?v=Az7V1FSRJfs]]<br />
| Hyrel Hydra X and Y Belt Tension Adjustments<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:SyMB5063J5E.jpg|200px| link=https://www.youtube.com/watch?v=SyMB5063J5E]]<br />
| Hyrel Hydra Linear Bearing Adjustments <br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:ZEsnegXhpLw.jpg|200px| link=https://www.youtube.com/watch?v=zEsnegXhpLw]]<br />
| Hyrel Hydra Z Belt Tension Adjustments<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:WNr59eCGuK4.png|200px| link=https://www.youtube.com/watch?v=WNr59eCGuK4]]<br />
| Changing the Address Resistor on the CO2 Laser<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:QBBxkx40H8s.png|200px| link=https://www.youtube.com/watch?v=qBBxkx40H8s]]<br />
| CO2 Laser Alignment<br />
| 16A<br />
| Calibration<br />
|-<br />
! [[File:YiizFlScq9Q.png|200px| link=https://www.youtube.com/watch?v=yiizFlScq9Q]]<br />
| Hydra Yoke Adjustment<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:CbiCnP_YEbA.png|200px| link=https://www.youtube.com/watch?v=cbiCnP_YEbA]]<br />
| Hydra Yoke Angle Adjustment<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:XMsXzGPHjng.png|200px| link=https://www.youtube.com/watch?v=xMsXzGPHjng]]<br />
| Engnie, High Resolution (EHR) Setup, Part 2<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:NbWgw9KY6Ic.png|200px| link=https://www.youtube.com/watch?v=NbWgw9KY6Ic]]<br />
| Engnie, High Resolution (EHR) Setup, Part 1<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:UC7acwIkKmQ.png|200px| link=https://www.youtube.com/watch?v=uC7acwIkKmQ]]<br />
| EHR Scaffold Instructions<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:b1x2dvdYkTE.png|200px| link=https://www.youtube.com/watch?v=b1x2dvdYkTE]]<br />
| EHR Scaffold Intro<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:oisWKujfXAI.png|200px| link=https://www.youtube.com/watch?v=oisWKujfXAI]]<br />
| Unclogging a rare clogged MK1-250 <br />
| All<br />
| Filaments<br />
|-<br />
! [[File:6FQJuhd2Lxo.png|200px| link=https://www.youtube.com/watch?v=6FQJuhd2Lxo]]<br />
| Unclogging a rare clogged MK1-450 <br />
| All<br />
| Filaments<br />
|-<br />
! [[File:WrImt7_Pnxo.png|200px| link=https://www.youtube.com/watch?v=WrImt7_Pnxo]]<br />
| Flashing Firmware on the Modified CO2 Laser Controller<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:1J5bqvcV3Rs.png|200px| link=https://www.youtube.com/watch?v=1J5bqvcV3Rs]]<br />
| The Hyrel Hydra Family<br />
| 16A<br />
| All<br />
|-<br />
! [[File:CF7eRdFuZYQ.png|200px| link=https://www.youtube.com/watch?v=CF7eRdFuZYQ]]<br />
| High Resolution Engine Vacuum Bed<br />
| EHR<br />
| Reservoirs<br />
|-<br />
! [[File:eltjeQ6KerM.png|200px| link=https://www.youtube.com/watch?v=eltjeQ6KerM]]<br />
| High Resolution Engine Setup<br />
| EHR<br />
| Setup<br />
|-<br />
! [[File:SvX4gKqAQDI.png|200px| link=https://www.youtube.com/watch?v=SvX4gKqAQDI]]<br />
| SDS Clench Valve Assembly Instructions<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:Mz5J8jsb6D4.png|200px| link=https://www.youtube.com/watch?v=Mz5J8jsb6D4]]<br />
| How to Load the SDS Clench Valve<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:JwKq8_tahYA.png|200px| link=https://www.youtube.com/watch?v=JwKq8_tahYA]]<br />
| EHR Accuracy Test<br />
| EHR<br />
| Calibration<br />
|-<br />
! [[File:Udbu_Zuh8k0.png|200px| link=https://www.youtube.com/watch?v=Udbu_Zuh8k0]]<br />
| Hydra 16A Controls Overview<br />
| 16A<br />
| All<br />
|-<br />
! [[File:cClPqIJwhLs.png|200px| link=https://www.youtube.com/watch?v=cClPqIJwhLs]]<br />
| Using Low Temperature Solder Paste to connect a Flat Flex Cable<br />
| 30M, ESR<br />
| Assembly<br />
|-<br />
! [[File:GCzPw4FOG8c.png|200px| link=https://www.youtube.com/watch?v=GCzPw4FOG8c]]<br />
| Draining Laser Coolant on the Hyrel Hydra<br />
| 16A<br />
| Lasers<br />
|-<br />
! [[File:pPtGSwyS140.png|200px| link=https://www.youtube.com/watch?v=pPtGSwyS140]]<br />
| Hydra Home Calibration Details<br />
| 16A<br />
| Calibration<br />
|-<br />
! [[File:LLIWqTRBhTo.png|200px| link=https://www.youtube.com/watch?v=LLIWqTRBhTo]]<br />
| Replacing the top component on an SDS Head Assembly<br />
| 16A<br />
| Setup<br />
|-<br />
! [[File:qxbtI034omk.png|200px| link=https://www.youtube.com/watch?v=qxbtI034omk]]<br />
| HYDRA Hot Bed Installation<br />
| 16A<br />
| Setup<br />
|-<br />
! [[File:fuLCsqfAX3E.png|200px| link=https://www.youtube.com/watch?v=fuLCsqfAX3E]]<br />
| Hydra Model Startup<br />
| All<br />
| Reservoirs<br />
|-<br />
! [[File:LhnV9H7LV9g.png|200px| link=https://www.youtube.com/watch?v=LhnV9H7LV9g]]<br />
| Unboxing the Hydra Floor Model Units<br />
| 16A<br />
| Setup<br />
|-<br />
! [[File:ULpn18OqD-U.png|200px| link=https://www.youtube.com/watch?v=ULpn18OqD-U]]<br />
| Hydra Overview by CTO Karl Gifford<br />
| 16A<br />
| All<br />
|-<br />
! [[File:QEfskyU7LJ4.png|200px | link=https://www.youtube.com/watch?v=QEfskyU7LJ4]]<br />
| How to Manage the Pick-and-Place with Repetrel Software<br />
| 16A<br />
| Pick-and-Place<br />
|-<br />
! [[File:Jz3onGdmW1c.png|200px| link=https://www.youtube.com/watch?v=Jz3onGdmW1c]]<br />
| Hyrel Hydra Versitility<br />
| 16A<br />
| All<br />
|-<br />
! [[File:pKkrd4R_54Y.png|200px| link=https://www.youtube.com/watch?v=pKkrd4R_54Y]]<br />
| Hydra Vinyl Cutter Overview<br />
| 16A<br />
| Cutting<br />
|-<br />
! [[File:haKWeCbXkMI.png|200px| link=https://www.youtube.com/watch?v=haKWeCbXkMI]]<br />
| Hyrel 3D Hydra Pick-and-Place Introduction<br />
| 16A<br />
| Pick-and-Place<br />
|-<br />
! [[File:uACoqtNbXE0.png|200px| link=https://www.youtube.com/watch?v=uACoqtNbXE0]]<br />
| The Hyrel3D Hydra Line<br />
| 16A<br />
| All<br />
|-<br />
! [[File:KAoSS-Z-aeY.png|200px| link=https://www.youtube.com/watch?v=KAoSS-Z-aeY]]<br />
| Tramming the bed on the 16A<br />
| 16A<br />
| Maintenance<br />
|-<br />
! [[File:tibkVZB_n9c.png|200px| link=https://www.youtube.com/watch?v=tibkVZB_n9c]]<br />
| The Benefits of Microscope Inspection During Printing<br />
| All<br />
| Microscopes<br />
|-<br />
! [[File:aR4d-2BZj_Y.png|200px| link=https://www.youtube.com/watch?v=aR4d-2BZj_Y]]<br />
| Printing PLGA for internal Biological Applications<br />
| All<br />
| Reservoirs<br />
|-<br />
|}<br />
<br />
=== 2016 (60) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2016<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:Z4IGQ5JMP6g.png|200px| link=https://www.youtube.com/watch?v=z4IGQ5JMP6g]]<br />
| Varialble Width Conductive Paste Extrusion <br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:2f5FEhVsqy8.png|200px| link=https://www.youtube.com/watch?v=2f5FEhVsqy8]]<br />
| Microscope Print View Setup<br />
| Any<br />
| Microscope<br />
|-<br />
! [[File:D2sWEYRVAII.png|200px| link=https://www.youtube.com/watch?v=D2sWEYRVAII]]<br />
| Replacing the LED Strip<br />
| 30M<br />
| Maintenance<br />
|-<br />
! [[File:14ynZ3DHzVg.png|200px| link=https://www.youtube.com/watch?v=14ynZ3DHzVg]]<br />
| Replacing the Front Switch Panel<br />
| 30M<br />
| Maintenance<br />
|-<br />
! [[File:DQj6oLfrbLo.png|200px| link=https://www.youtube.com/watch?v=DQj6oLfrbLo]]<br />
| Static Mixing Head (SMH) Explained - v2 Including SDS Heads<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:VJXnB-8JII.png|200px| link=https://www.youtube.com/watch?v=_vJXnB-8JII]]<br />
| Hot Bed Manufacturing<br />
| Hydra<br />
| Manufacturing<br />
|-<br />
! [[File:3azICOBuHdk.png|200px| link=https://www.youtube.com/watch?v=3azICOBuHdk]]<br />
| Static Mixing Head (SMH) Explained<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:6qJ-2uFt-_Y.png|200px| link=https://www.youtube.com/watch?v=6qJ-2uFt-_Y]]<br />
| Timelapse Recording<br />
| Any<br />
| Recording<br />
|-<br />
! [[File:ROpcvqS r8s.png|200px| link=https://www.youtube.com/watch?v=ROpcvqS_r8s]]<br />
| HotHead LEDs Explained<br />
| Any<br />
| Any<br />
|-<br />
! [[File:Tz6mRSkOaSk.png|200px| link=https://www.youtube.com/watch?v=Tz6mRSkOaSk]]<br />
| LA6-450 and LA5-808 Laser Overview<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:h95IurET7UM.png|200px| link=https://www.youtube.com/watch?v=h95IurET7UM]]<br />
| SDS and CSD Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:4B9hoMLNOuQ.png|200px| link=https://www.youtube.com/watch?v=4B9hoMLNOuQ]]<br />
| Quiet Storm Cooling Fan Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:9_onCKhT_dg.png|200px| link=https://www.youtube.com/watch?v=9_onCKhT_dg]]<br />
| VOL-25 and VCD-25 Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:QD2FrZ4kg1g.png|200px| link=https://www.youtube.com/watch?v=QD2FrZ4kg1g]]<br />
| KRA-15 and KCD-15 Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:Rc2UFwjUtc4.png|200px| link=https://www.youtube.com/watch?v=Rc2UFwjUtc4]]<br />
| Hydra 640 (16A) Two Part Test Print<br />
| Hydra<br />
| Filaments<br />
|-<br />
! [[File:Ql1NZLWVJQM.png|200px| link=https://www.youtube.com/watch?v=Ql1NZLWVJQM]]<br />
| Extrusion Prototype Print<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:KtK256u0sN8.png|200px| link=https://www.youtube.com/watch?v=ktK256u0sN8]]<br />
| EMO-25 and COD-25 Overview<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:Vn8jnvwh5to.png|200px| link=https://www.youtube.com/watch?v=Vn8jnvwh5to]]<br />
| Session 3C Slicing for Multiple Head Support<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:p1Ihd4ETxhg.png|200px| link=https://www.youtube.com/watch?v=p1Ihd4ETxhg]]<br />
| Session 3A - Setting Two Heads to Z-Zero<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:FCuSvQm6ej4.png|200px| link=https://www.youtube.com/watch?v=FCuSvQm6ej4]]<br />
| Session 3B - Calibrating the Offset Between Two Heads<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:dkQpsJWRI4Y.png|200px| link=https://www.youtube.com/watch?v=dkQpsJWRI4Y]]<br />
| Session 2D - Editing Slic3r Recipes<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:kJc9sNlV0fA.png|200px| link=https://www.youtube.com/watch?v=kJc9sNlV0fA]]<br />
| Session 2E - Slicing your STL and Viewing your GCODE<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:IQbgGwiGVZA.png|200px| link=https://www.youtube.com/watch?v=IQbgGwiGVZA]]<br />
| Session 2C - Positioning, Scaling, and Rotating your STL<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:mVyCq7CPGLg.png|200px| link=https://www.youtube.com/watch?v=mVyCq7CPGLg]]<br />
| Session 1A - Hardware and Software Overview<br />
| Any<br />
| Overview<br />
|-<br />
! [[File:2tIHw_JIQAI.png|200px| link=https://www.youtube.com/watch?v=2tIHw_JIQAIv]]<br />
| Session 1B - Communications and Bed Leveling<br />
| 30M, ESR<br />
| Setup<br />
|-<br />
! [[File:lFATCfKJf4I.png|200px| link=https://www.youtube.com/watch?v=lFATCfKJf4I]]<br />
| Session 1C - Printing with Plasticine<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:2yHRuef29L4.png|200px| link=https://www.youtube.com/watch?v=2yHRuef29L4]]<br />
| Session 2A: Simple CAD Modeling in FreeCAD<br />
| Any<br />
| Software<br />
|-<br />
! [[File:RlJqdhtpB6Q.png|200px| link=https://www.youtube.com/watch?v=RlJqdhtpB6Q]]<br />
| PC to Printer Connectivity<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:C88ni0huwhw.png|200px| link=https://www.youtube.com/watch?v=C88ni0huwhw]]<br />
| Using the Spindle Tool to rework Circuit Boards<br />
| Any<br />
| Spindle<br />
|-<br />
! [[File:KIGeQmXNbNE.png|200px| link=https://www.youtube.com/watch?v=KIGeQmXNbNE]]<br />
| Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software<br />
| n/a<br />
| Manufacturing<br />
|-<br />
! [[File:ImMo3V1D70w.png|200px| link=https://www.youtube.com/watch?v=ImMo3V1D70w]]<br />
| Table Arm (X-Arm) Block Adjustment<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:yaCYFmoIESk.png|200px| link=https://www.youtube.com/watch?v=yaCYFmoIESk]]<br />
| MK1-250 Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:UvZMecXsHEM.png|200px| link=https://www.youtube.com/watch?v=UvZMecXsHEM]]<br />
| MK1-450 Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:SOGKeU3vLbs.png|200px| link=https://www.youtube.com/watch?v=SOGKeU3vLbs]]<br />
| MK2-250 Overview<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:FkJT3ILlAHw.png|200px| link=https://www.youtube.com/watch?v=FkJT3ILlAHw]]<br />
| Replacing the 30M/ESR Heated Build Platform<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:3KwJ6OgOx14.png|200px| link=https://www.youtube.com/watch?v=3KwJ6OgOx14]]<br />
| Multi Head Printing - Nested STLs<br />
| Any<br />
| Software<br />
|-<br />
! [[File:4GYWfMrs0F8.png|200px| link=https://www.youtube.com/watch?v=4GYWfMrs0F8]]<br />
| X-Axis Belt Tightening <br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:IkgviAGep-c.png|200px| link=https://www.youtube.com/watch?v=IkgviAGep-c]]<br />
| Y-Axis Belt Tightening<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:lQy25Nlj3_Q.png|200px| link=https://www.youtube.com/watch?v=lQy25Nlj3_Q]]<br />
| Plasma Magnetic Vortex Deposition (ElectroSpinning)<br />
| EHR<br />
| Electro (Melt) Spinning<br />
|-<br />
! [[File:LQb5vS97jFo.png|200px| link=https://www.youtube.com/watch?v=LQb5vS97jFo]]<br />
| 3D Milling on the Hydra Series<br />
| Hydra<br />
| Spindle<br />
|-<br />
! [[File:81sVBZOOcbw.png|200px| link=https://www.youtube.com/watch?v=81sVBZOOcbw]]<br />
| Introducing the Hydra 640 (formerly Model 16A)<br />
| Hydra<br />
| Overview<br />
|-<br />
! [[File:uPqr4S0WC3Q.png|200px| link=https://www.youtube.com/watch?v=uPqr4S0WC3Q]]<br />
| USBB Jumper Instructions<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:Rw2E_d-q9bQ.png|200px| link=https://www.youtube.com/watch?v=Rw2E_d-q9bQ]]<br />
| Size Does Matter<br />
| Hydra<br />
| Overview<br />
|-<br />
! [[File:xGriCCrfkuw.png|200px| link=https://www.youtube.com/watch?v=xGriCCrfkuw]]<br />
| Print Heads Overview<br />
| Any<br />
| All<br />
|-<br />
! [[File:QMyuKdgiWI4.png|200px| link=https://www.youtube.com/watch?v=QMyuKdgiWI4]]<br />
| Session 2F - Loading and Printing with Filaments, MK-Series Heads<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:ysO8oAzFwC4.png|200px| link=https://www.youtube.com/watch?v=ysO8oAzFwC4]]<br />
| MK1-250 PEEK Nozzle Assembly<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:BoHRC9m5nlQ.png|200px| link=https://www.youtube.com/watch?v=BoHRC9m5nlQ]]<br />
| New Hydra Printer Line Intro<br />
| Hydra<br />
| Overview<br />
|-<br />
! [[File:XREWb_Md5o0.png| link=https://www.youtube.com/watch?v=XREWb_Md5o0]]<br />
| Bioplotting for under $10K<br />
| EHR<br />
| Introduction<br />
|-<br />
! [[File:9zxxBYbdlOE.png|200px| link=https://www.youtube.com/watch?v=9zxxBYbdlOE]]<br />
| Programming Head Offsets<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:nfIvS50zLyc.png|200px| link=https://www.youtube.com/watch?v=nfIvS50zLyc]]<br />
| Slicing for a Two-Material Print<br />
| Any<br />
| Slicing<br />
|-<br />
! [[File:0dS3bC0BnRQ.png|200px| link=https://www.youtube.com/watch?v=0dS3bC0BnRQ]]<br />
| Loading Filament and Printing with the Hyrel3D MK2-250<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:v2ifSlZ0qEw.png|200px| link=https://www.youtube.com/watch?v=v2ifSlZ0qEw]]<br />
| Loading Filament and Printing with the Hyrel3D MK1-250<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:q-DbAbNMW48.png|200px| link=https://www.youtube.com/watch?v=q-DbAbNMW48]]<br />
| Loading and Printing with the EMO-25 Print Head<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:ej55bZXrltA.png|200px| link=https://www.youtube.com/watch?v=ej55bZXrltA]]<br />
| SDS RTV Instructions, v2<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:MwrhV74NjCQ.png|200px| link=https://www.youtube.com/watch?v=MwrhV74NjCQ]]<br />
| Intro to Hyrel Possibilities - Jan 2016<br />
| All<br />
| Overview<br />
|-<br />
! [[File:V_zCytnGvvo.png|200px| link=https://www.youtube.com/watch?v=V_zCytnGvvo]]<br />
| MK2-250 Dual Drive for Flexible Filaments<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:O1IGa-8y9yQ.png|200px| link=https://www.youtube.com/watch?v=O1IGa-8y9yQ]]<br />
| 6w, 450nm Laser Test<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:0JJp7HeK35M.png|200px| link=https://www.youtube.com/watch?v=0JJp7HeK35M]]<br />
| SDS RTV Instructions, v1<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:XKHa1CXnSdI.png|200px| link=https://www.youtube.com/watch?v=XKHa1CXnSdI]]<br />
| Introducing the SDS Print Heads<br />
| Any<br />
| SDS<br />
|-<br />
! [[File:BlSGlOpyipI.png|200px| link=https://www.youtube.com/watch?v=BlSGlOpyipI]]<br />
| Sneak Peek: Pick and Place Prototype<br />
| Hydra<br />
| Pick-and-Place<br />
|-<br />
|}<br />
<br />
=== 2012-2015 (43) ===<br />
<br />
{| border="1" class="wikitable sortable" style="text-align: center" <br />
|+ Table of Video Links, 2012-2015<br />
! Video Link<br />
! Subject<br />
! Printer Model<br />
! Head / Activity<br />
|-<br />
! [[File:OceUiuTixPA.png|200px|link=https://www.youtube.com/watch?v=OceUiuTixPA]]<br />
| LA6-450: 6w, 450nm Diode Laser Head<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:vmw0LS_f9V0E.png|200px|link=https://www.youtube.com/watch?v=vmw0LS_f9V0]]<br />
| 3D Printing RTV Silicone<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:YWe3TQGgNW0.png|200px|link=https://www.youtube.com/watch?v=YWe3TQGgNW0]]<br />
| Loading the VCD-25<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:huJuexTLbYA.png|200px|link=https://www.youtube.com/watch?v=huJuexTLbYA]]<br />
| Short Porcelain Print Demo<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:b583I7AlGJI.png|200px|link=https://www.youtube.com/watch?v=b583I7AlGJI]]<br />
| Replacing the Tablet Interface Board<br />
| 30M<br />
| Maintenance<br />
|-<br />
! [[File:ZKAzXoJ0q8Y.png|200px|link=https://www.youtube.com/watch?v=ZKAzXoJ0q8Y]]<br />
| 2016 Design Contest Video<br />
| N/A<br />
| Contest<br />
|-<br />
! [[File:YRsyEGHyt3k.png|200px|link=https://www.youtube.com/watch?v=YRsyEGHyt3k]]<br />
| DXF to Laser Gcode Generation<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:Om9cjxMXuxY.png|200px|link=https://www.youtube.com/watch?v=Om9cjxMXuxY]]<br />
| Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:IreaoCfQ8mE.png|200px|link=https://www.youtube.com/watch?v=IreaoCfQ8mE]]<br />
| Healing with MeshLab<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:0Aj9WCabPgw.png|200px|link=https://www.youtube.com/watch?v=0Aj9WCabPgw]]<br />
| Postprocessing with a Heat Gun<br />
| Any<br />
| Postprocessing<br />
|-<br />
! [[File:4oxCqR_DVNQ.png|200px|link=https://www.youtube.com/watch?v=4oxCqR_DVNQ]]<br />
| Introduction to Hyrel 3D Possibilities, 2015<br />
| All<br />
| All<br />
|-<br />
! [[File:n4QwiuQtjO0.png|200px|link=https://www.youtube.com/watch?v=n4QwiuQtjO0]]<br />
| Updating to Repetrel 2 4xx<br />
| Any<br />
| Software<br />
|-<br />
! [[File:cFAFRkpLmww.png|200px|link=https://www.youtube.com/watch?v=cFAFRkpLmww]]<br />
| Updating your 407 Motion Controller<br />
| All<br />
| Software<br />
|-<br />
! [[File:XKCEkKSolZc.png|200px|link=https://www.youtube.com/watch?v=XKCEkKSolZc]]<br />
| Replacing the HOTHEAD controller<br />
| Any<br />
| Any<br />
|-<br />
! [[File:YM8QMZBTb4o.png|200px|link=https://www.youtube.com/watch?v=yM8QMZBTb4o]]<br />
| Programming the HOTBED controller on the System 30M and ESR<br />
| 30M, ESR<br />
| Software<br />
|-<br />
! [[File:CuRcIE-Jbyc.jpg|200px|link=https://www.youtube.com/watch?v=cuRcIE-Jbyc]]<br />
| Printing with Cloning - three heads in Parallel<br />
| Any<br />
| Any<br />
|-<br />
! [[File:VMyS3h4qiSA.jpg|200px|link=https://www.youtube.com/watch?v=VMyS3h4qiSA]]<br />
| Older Instructions, Slicing for Multiple Head Support<br />
| printer<br />
| head<br />
|-<br />
! [[File:0gFX6Mh-ths.png|200px|link=https://www.youtube.com/watch?v=0gFX6Mh-ths]]<br />
| Leveling the X-Arm on System 30M, Engine SR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:LZd0ecogGlQ.png|200px|link=https://www.youtube.com/watch?v=LZd0ecogGlQ]]<br />
| Correcting Y-Arm Flexation Fix on the System 30M, Engine SR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:ArDX4UpflmE.png|200px|link=https://www.youtube.com/watch?v=ArDX4UpflmE]]<br />
| Manually Setting the Z-Zero Position<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:vc9gBZtUL7c.png|200px|link=https://www.youtube.com/watch?v=vc9gBZtUL7c]]<br />
| Picking Right 3D Printer For You<br />
| All<br />
| All<br />
|-<br />
! [[File:66S9XJ-KeU8.png|200px|link=https://www.youtube.com/watch?v=66S9XJ-KeU8]]<br />
| Changing the Main I/O Board, System 30M, ESR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:YEePz8_0ttc.png|200px|link=https://www.youtube.com/watch?v=yEePz8_0ttc]]<br />
| Laser Test Print<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:tLHpaePTP-k.png|200px|link=https://www.youtube.com/watch?v=tLHpaePTP-k]]<br />
| EMO Series Printing Tips<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:Zl1sqy6PWx8.jpg|200px|link=https://www.youtube.com/watch?v=Zl1sqy6PWx8]]<br />
| Changing Power Supplies in the 30M and ESR<br />
| 30M, ESR<br />
| Maintenance<br />
|-<br />
! [[File:IQscrgv6uaQ.png|200px|link=https://www.youtube.com/watch?v=IQscrgv6uaQ]]<br />
| Multi-Head Calibration Guide<br />
| Any<br />
| Setup<br />
|-<br />
! [[File:0lpa4nENtyQ.png|200px|link=https://www.youtube.com/watch?v=0lpa4nENtyQ]]<br />
| LA5-808 "Shark V" Diode Laser<br />
| Any<br />
| Lasers<br />
|-<br />
! [[File:mPYPWjnDGho.png|200px|link=https://www.youtube.com/watch?v=mPYPWjnDGho]]<br />
| Luer Tip Kit for EMO and SDS Series Print Heads<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:-VHxf182fIs.png|200px|link=https://www.youtube.com/watch?v=-VHxf182fIs]]<br />
| Print Head SDK<br />
| Any<br />
| New!<br />
|-<br />
! [[File:Fg9omXlYR-Q.png|200px|link=https://www.youtube.com/watch?v=Fg9omXlYR-Q]]<br />
| MK Series Printing Tips<br />
| Any<br />
| Filaments<br />
|-<br />
! [[File:SoY9uOw3nCM1.png|200px|link=https://www.youtube.com/watch?v=Fg9omXlYR-Q]]<br />
| Leveling the beds on VERY OLD ESR and 30M machines.<br />
| ESR/30M<br />
| Any<br />
|-<br />
! [[File:EosKDe-SyUI.png|200px|link=https://www.youtube.com/watch?v=soY9uOw3nCM]]<br />
| Replacing fuses (old) on the Yoke<br />
| Any<br />
| Maintenance<br />
|-<br />
! [[File:4yuzpUqeE-Y.png|200px|link=https://www.youtube.com/watch?v=4yuzpUqeE-Y]]<br />
| Loading the EMO-type Reservoirs<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:xQFacnpzmv0.png|200px|link=https://www.youtube.com/watch?v=xQFacnpzmv0]]<br />
| Changing the Economics of 3D Printing<br />
| Any<br />
| Any<br />
|-<br />
! [[File:c9HvQ3SepoM.png|200px|link=https://www.youtube.com/watch?v=c9HvQ3SepoM]]<br />
| System 30M Product Release<br />
| 30M<br />
| Introduction<br />
|-<br />
! [[File:P6aMBQSZPgg.png|200px|link=https://www.youtube.com/watch?v=P6aMBQSZPgg]]<br />
| Simultaneous 3D Printing of Multiple Parts<br />
| Any<br />
| Any<br />
|-<br />
! [[File:nuii5rP53Js.png|200px|link=https://www.youtube.com/watch?v=nuii5rP53Js]]<br />
| 3D Printing with Sugru The Amazing Self-Setting Rubber<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:dihvAQR7LQg.png|200px|link=https://www.youtube.com/watch?v=dihvAQR7LQg]]<br />
| 3D Printing with Play-Doh<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:cw8XiW46G0k.png|200px|link=https://www.youtube.com/watch?v=cw8XiW46G0k]]<br />
| 3D Printing with Plasticine<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:trdz4YDbdsw.png|200px|link=https://www.youtube.com/watch?v=trdz4YDbdsw]]<br />
| 3D Printing with Air-Dry Modeling Clay<br />
| Any<br />
| Reservoirs<br />
|-<br />
! [[File:XNwv7Dw_Zwg.png|200px|link=https://www.youtube.com/watch?v=XNwv7Dw_Zwg]]<br />
| Interchangeable Hot-Swappable Heads<br />
| Any<br />
| Any<br />
|-<br />
! [[File:mu9xMmkZFns.png|200px|link=https://www.youtube.com/watch?v=mu9xMmkZFns]]<br />
| Thank you, Kickstarters!<br />
| Any<br />
| Any<br />
|-<br />
! [[File:Z9rgkw5r4l4.png|200px|link=https://www.youtube.com/watch?v=Z9rgkw5r4l4]]<br />
| Quick Tour of our Main Shop!<br />
| Any<br />
| Any<br />
|-<br />
|}</div>Davohttps://hyrel3d.com/wiki/index.php?title=Connectivity&diff=7771Connectivity2024-03-12T14:21:01Z<p>Davo: /* Is the Motion Controller working? */</p>
<hr />
<div>[[Category:HowTo]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Whether connecting from the Tablet or another PC, we cannot control what COM port the printer is assigned to. Here is what to do if Repetrel is not connecting to the Printer (the motion controller).<br />
<br />
'''Quick Note: 90% of the time, when the unit is powered with no connectivity, it is either a loose connection on the USB cable or the wrong COM port has been selected.'''<br />
<br />
Click any image for a larger version.<br />
<br />
<hr><br />
''Please note that this page is for communications issues. If Repetrel is showing your heads and printer, but you CANNOT OPERATE (heat, move) your heads or bed, you may not have a communications issue, but <span style="color: red;">CHECK IF YOUR EMERGENCY STOP IS ENGAGED.</span> The E-Stop will prevent power to your motors and heating elements.''<br />
<br />
''NOTE: Standard troubleshooting is based on controlling the printer from the tablet we ship (and test) with. If you are controlling your printer from a computer other than the tablet we ship with, PLEASE reseat your USB cables and then follow the instructions at [[USB]].''<br />
<hr><br />
<br />
== Video ==<br />
<br />
The following video is all that most people will need to reset their COM port:<br />
<br />
https://www.youtube.com/watch?v=RlJqdhtpB6Q<br />
<br />
== Is the Printer Powered Up? ==<br />
<br />
Ensure that:<br />
# The power supply is plugged into a known good receptacle;<br />
# Older power supply is set to the proper voltage (115/230 VAC) - '''newer ones (since ~ 2020) are autodetecting and autoswitching;'''<br />
# The power supply is turned on; and<br />
# The power button is pressed in.<br />
<br />
When this is the case, on a 30M, the Power and Reset buttons should be illuminated:<br />
<br />
<gallery><br />
File:Power_reset.png|30M Power, Reset Buttons<br />
File:16A_power_reset.jpg|16A Power, Reset Buttons<br />
File:BJ_power.jpg|New ESR, EHR, 30M Indicators<br />
</gallery><br />
<br />
When your printer is powered up, as above, we move on to the motion controller:<br />
<br />
== Is the Motion Controller working? ==<br />
<br />
When the motion controller is working properly and communicating with another device over CANBUS (the hotbed controller and any loaded heads), you should see (on ESR and 30M units) a blinking green "heartbeat" light on the front of the spine, about 6cm up from the bottom and about 2cm in from the right:<br />
<br />
[[File:Heartbeat.png|200px|Heartbeat LED]]<br />
<br />
Newer printers will have status LEDs on the Tablet Interface Board:<br />
<br />
[[File:BJ_power.jpg|200px|Status LEDs]]<br />
<br />
If the heartbeat is missing, first unload any print heads and reset the printer:<br />
<br />
If this was unsuccessful, disconnect the hotbed controller by engaging the emergency stop, then grabbing all wires firmly and pulling to the left; then load a print head and reset the printer:<br />
<br />
[[File:Unplug_hbc_1.png|200px|Unplug the Hotbed Controller]] [[File:Unplug_hbc_2.png|200px|Unplug the Hotbed Controller]] [[File:Unplug_hbc_3.png|200px|Unplug the Hotbed Controller]]<br />
<br />
If the heartbeat is still missing, there are two potential causes: <br />
<br />
<span style="color: red;">'''ALL UNITS HAVE BEEN THOUROUGHLY TESTED BEFORE SHIPPING. IF YOU HAVE A NEW UNIT WITH AN ISSUE, CONTACT US. DO NOT CHANGE FIRMWARE OR SETTINGS.'''</span><br />
<br />
One, the firmware on the motion controller may not be in sync with the firmware on the other device(s). Our fix for this is to flash a known version to the motion controller and a compatible version to the print heads. However, this is not usually the root cause unless you are working with some older equipment which has not been properly updated during 2016 or later.<br />
<br />
Two, we may need to press the reset button on the motion controller itself:<br />
# Use a 2.5mm hex driver to remove the screws holding the rear cover in place;<br />
# Press the reset button on the motion controller card:<br />
<br />
[[File:407reset.png|400px|Motion Controller Reset Button]]<br />
<br />
If we still haven't restored the heartbeat, there is some issue with the motion controller itself, so we should flash the current firmware onto it again:<br />
<br />
In Repetrel, click File > Update Firmware > 407 Motion Controller:<br />
<br />
[[File:Flash407_1.png|400px|Flashing the Motion Controller, Image 1]]<br />
<br />
You should see the green message "Connected" when connected. If you see a yellow message "Not connected Check Boot Switch Press RESET Button" instead, check your USB connectivity to the printer and press the reset button. Once you are on firmware 2.4 and above, you will not need to change the boot/run switch to connect or flash.<br />
<br />
Next, click Select File, highlight the correct file, and click Open:<br />
<br />
[[File:Flash407_2.png|400px|Flashing the Motion Controller, Image 2]]<br />
<br />
Last, click Program and wait for the process to complete and the window to close.<br />
<br />
[[File:Flash407_3.png|400px|Flashing the Motion Controller, Image 3]]<br />
<br />
Now you should have the heartbeat. If not, there can be two causes. <br />
<br />
1. You might not have good CANBUS communications. We need at least one device to be communicating properly, and NO devices on mismatched firmware (since some of the protocols have changed over the years); this includes the hotbed controller and the heads. To determine if this is the case, disconnect the hotbed controller by engaging the emergency stop, then grabbing all wires firmly and pulling to the left; then load a print head and reset the printer:<br />
<br />
[[File:Unplug_hbc_1.png|200px|Unplug the Hotbed Controller]] [[File:Unplug_hbc_2.png|200px|Unplug the Hotbed Controller]] [[File:Unplug_hbc_3.png|200px|Unplug the Hotbed Controller]] <br />
<br />
2. We might have a problem with the 407 Motion Controller. We have had less than 1% of these go bad, and when they do it has been after a severe power surge. Contact us if this is the case.<br />
<br />
Once you have the heartbeat, we can proceed:<br />
<br />
== Are we Connected? ==<br />
<br />
Please note that with Repetrel v3 and above, even though you are still using a USB cable, you MUST connect over the a virtual COM port to the UART. The process for selecting the COM port is the same.<br />
<br />
=== Version 2.x ===<br />
<br />
Note: in v3 and later, the "refresh" functionality is activated by clicking on the COM menu button.<br />
<br />
If Repetrel doesn't automatically connect to the printer at this time, we may need to manually set the COM port:<br />
<br />
In Repetrel, click on the Comm Link tab:<br />
<br />
[[File:Comlink_1.png|300px|Com Link Tab]]<br />
<br />
Click on the COM# button and select Refresh:<br />
<br />
[[File:Comlink_2.png|300px|Refresh]]<br />
<br />
Click on the COM# button again, and select the highest COM port shown; you may need to cycle through all available ports, but it is usually the highest numbered one displayed:<br />
<br />
[[File:Comlink_3.png|300px|Set Com Port]]<br />
<br />
Ensure that the communication rate is set to 38400; click Apply, and then click Ping. You should get the message "Printer Connected" as shown below:<br />
<br />
[[File:Comlink_4.png|300px|Apply and Ping]]<br />
<br />
=== Versions 3.x and 4.x ===<br />
<br />
If Repetrel doesn't automatically connect to the printer at this time, we may need to manually set the COM port.<br />
<br />
==== Setting the COM Port and BAUD Rate ====<br />
<br />
In Repetrel, under the Interface tab and the COM tab, click the COM button to list the available ports:<br />
<br />
[[File:Comlink4_ports.png|300px|Ports]]<br />
<br />
Select a COM port, ensure the rate is set to 38400 or 115200, click Apply, then click PING:<br />
<br />
[[File:Comlink3_4.png|300px|Apply and Ping]]<br />
<br />
Check to see if you connected over the UART or USB protocol.<br />
<br />
If it's USB, repeat the process selecting the other port.<br />
<br />
'''USB:'''<br />
<br />
[[File:Comlink4_4.png|400px|USB]]<br />
<br />
'''UART:'''<br />
<br />
[[File:Comlink3_5.png|400px|UART]]<br />
<br />
==== Delving Deeper ====<br />
<br />
If you really want to know what's what with your communications, click the HELP menu and select "List USB devices on this computer":<br />
<br />
[[File:Comlink3_listUSB.png|300px|COM Tab]]<br />
<br />
You should see not only the FT232R USB UART under Devices, which represents your actual motion controller:<br />
<br />
[[File:Comlink3_DevsUART.png|300px|Devices & Printers]]<br />
<br />
But also, under Unspecified, you should see the STMicroelectronics Virtual COM Port, which represents the port on our tablet interface board which routes your comms to the motion controller:<br />
<br />
[[File:Comlink3_DevsVCP.png|300px|Devices & Printers]]<br />
<br />
This should have a com port listed at the end of the name, in parentheses. Double-click to open Properties:<br />
<br />
[[File:Comlink3_UART_Props.png|300px|Devices & Printers]]<br />
<br />
Click on the Hardware tab and see if there are any warnings (a hazard icon would be present):<br />
<br />
[[File:Comlink3_UART_Props_HW.png|300px|Devices & Printers]]<br />
<br />
If you have the hazard icon, perform the '''[http://hyrel3d.net/wiki/index.php/Drivers| Installing Drivers]''' tasks again.<br />
<br />
If all looks well, read the port number; this is the port you want to use to connect:<br />
<br />
[[File:Comlink3_UART_Props_HW2.png|300px|Devices & Printers]]<br />
<br />
Select that COM port, ensure the rate is set to 38400, click Apply, then click PING:<br />
<br />
[[File:Comlink3_4.png|300px|Apply and Ping]]<br />
<br />
You should now be connected over the UART protocol:<br />
<br />
[[File:Comlink3_5.png|400px|Apply and Ping]]<br />
<br />
== Heads Unresponsive? ==<br />
<br />
If your head is plugged in, but not working as expected, there are a few things that might be wrong.<br />
<br />
Each head has both a mechanical connection and an electronic connection.<br />
<br />
The mechanical connection is to lock the head rigidly in place, and also to adjust so that multiple heads can all have their nozzles at the same "Z-zero" height.<br />
<br />
The electronic connection provides power to the head (for motor and, if present, heater) as well as bi-directional communications between the head and the motion controller (and from there, to Repetrel).<br />
<br />
# (A) With the head unloaded, loosen the two screws on the back by about 90-180 degrees - just enough to be able to wiggle the circuit board.<br />
# Push your emergency stop in, load the head as far down as it will go, and then tighten the thumbscrew (or, on Hydras, the set screw with the 3mm hex driver - called a thumbscrew hereafter).<br />
# (B) Now seat the circuit board so that it makes full contact along the entire connector; improper seating may turn the LEDs on without providing power.<br />
# Seat the spacer board all the way down, and tighten the screws (A).<br />
<br />
[[File:103_adjustment.jpg|300px]] <br />
<br />
Ready to go!</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7770Published Papers2024-03-11T15:04:00Z<p>Davo: /* Count */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
507 documents as of 11 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7769Published Papers2024-03-11T15:03:44Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
506 documents as of 1 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877424000980#preview-section-snippets Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention] by a team from the [https://crdt.iitd.ac.in/ Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi] and [https://agriculture-food-sustainability.uq.edu.au/ School of Agriculture and Food Sciences, The University of Queensland]<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=How_do_I...&diff=7768How do I...2024-03-06T20:46:24Z<p>Davo: /* How do I change nozzles or clean nozzles? */</p>
<hr />
<div>[[Category:HowTo]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== How do I adjust the settings? ==<br />
<br />
This is pretty easy, once you know the flow.<br />
<br />
# You set the recipes for the parameters (extrusion width, infill patterns/density, print speed, layer thickness, head/bed temperatures, etc.; save the recipes (with descriptive names - don't overwrite the originals), and close the recipe editor.<br />
# You highlight your properly scaled, positioned, rotated stl and select the print, printer, and extruder (filament) recipes to use, and go to Process > Slice with Slic3r.<br />
# You review your gcode to ensure that you got what you were hoping to get; review the layer-by-layer rendering as well as the actual settings for temperature, layer thickness (Z moves and M756 flow settings), etc.<br />
# You load the print head. Default settings from the head are displayed in Repetrel.<br />
# You ensure that the data on the print head reflect your preheat temperature (if any) and proper nozzle diameter (and prime/unprime settings if your custom material requires adjustment) - these settings should be flashed to the head.<br />
# You do any preparation (preheating, bed treatment, priming material, etc).<br />
# You press Print. Upon pressing print, the following happens:<br />
## Head settings are sent from repetrel to the printer.<br />
## Gcode is sent from repetrel to the printer. Since gcode is sent second, this will overwrite any head-based settings if gcode has different values<br />
<br />
<br />
== How do I run a different language? ==<br />
<br />
<span style="color: red;">'''YOU DON'T - IT WILL BREAK REPETREL!'''</span> You can change the language of repetrel, but if you operate the computer on another language the "," and "." will be wrong and nothing will work. Trust me.<br />
<br />
<br />
== How do I set Z-zero on Multiple Heads? ==<br />
<br />
Please watch this video: https://www.youtube.com/watch?v=IQscrgv6uaQ<br />
<br />
If you still have questions, contact Davo.<br />
<br />
== How do I change the home location? ==<br />
<br />
You don't. The X and Y home positions are X0 and Y0, and are determined by sensors. But you can apply an offset. See G54-59 on the [[Gcode]] page.<br />
<br />
Note, on the EHR there is a Z home sensor, which is at Z120. To set Z offsets on the EHR, see M660 on the [[Gcode]] page.<br />
<br />
== How do I change the park location? ==<br />
<br />
Note, if you set park for head 4, then head 2 will be 70mm off. Each position is 35 *mm from the next. *70 mm between first and second slots on ESR/30M.<br />
<br />
1. Load the head you want to set this for in the slot you want to set it for.<br />
<br />
2. Record the absolute X and Y positions:<br />
<br />
[[File:Abs-pos.png|250px]]<br />
<br />
3. Open Settings > Printer:<br />
<br />
[[File:Settings-printer.png|250px]]<br />
<br />
4. Enter the recorded X and Y values:<br />
<br />
[[File:Park-pos.png|250px]]<br />
<br />
5. Click "Flash Motion Settings", then "Apply", then "OK":<br />
<br />
[[File:Flash-apply-ok.png|250px]]<br />
<br />
== How do I change the Baud Rate? ==<br />
<br />
So, on (roughly) version 4.2.4x (aka 42.4x) or later, you can actually set Repetrel AND the printer to use a Baud rate of 115,200 (versus the default 38,400) - but you have to set this on the printer as well as in Repetrel:<br />
<br />
* On the right side of the program , go to Interface > COM<br />
* Select the rate you want to change to (115,200)<br />
* HOLD THE SHIFT KEY and click "Apply"<br />
<br />
You should now be connected at the new rate.<br />
<br />
== How do I change nozzles or clean nozzles? ==<br />
<br />
Carefully:<br />
# Heat to the printing temperature of the material loaded.<br />
# Move the manual lever to the left, retracting material until it is free of the advancement gear, then remove by hand.<br />
# Turn off heat to the head and remove it from the yoke. *Nozzle should be HOT when this step is done; use caution.<br />
# With a 1/4" driver or wrench, remove the nozzle.<br />
# Inspect the nozzle cavity for any stray material; if found, remove with tweezers, solvent, air pressure or other means.<br />
# The old nozzle can be cleaned with a fine drill bit the same size as (or slightly smaller than) the nozzle diameter; some users also soak the nozzle in an appropriate solvent to remove all material.<br />
# With a 1/4" driver or wrench, attach the new nozzle.<br />
# Use normal procedure for heating and loading filament.<br />
<br />
== How do I change nozzle sizes? ==<br />
<br />
There are two places where we consider nozzle size:<br />
<br />
1. On the head, we use the number you have for nozzle diameter to make our flow calculations. See [[Flow Rate]] for details about how we determine how fast to spin the motor so that you get the proper volume per second of deposition. This image is for printing with a 14# (fourteen gauge, or 1.6mm ID) luer needle:<br />
<br />
[[File:H_N_mat_tab.png]]<br />
<br />
2. In the recipe, we use the extrusion width numbers to determine how far apart to place each bead of material. We expect your extrusion width to be 10% wider than your nozzle diameter (to allow for a nice sandbag-shaped cross section). This image is for printing with a 14# (fourteen gauge, or 1.6mm ID) luer needle:<br />
<br />
[[File:H_N_slicer.png]]<br />
<br />
This applies to everything we print, from PLA to Porcelain to PEEK.<br />
<br />
Please note that we do NOT use any other variable relating to nozzle diameter. Not Bridge Flow Ratio. Not Nozzle Diameter. Not Extrusion Multiplier. All of these variables affect the E values in your gcode. Which we then ignore.<br />
<br />
<br />
== How do I convert DXF files to gcode? ==<br />
<br />
1. In Project Composer, open your DXF:<br />
<br />
[[File:H_D_loaddxf.png]]<br />
<br />
2. On the Slicer tab, double click in the text box next to drill-laser, and select the recipe:<br />
<br />
[[File:H_D_dlrecipe.png]]<br />
<br />
3. On the Prams tab, configure the head and settings to use:<br />
<br />
[[File:H_D_prams.png]]<br />
<br />
4. Process > Process DXF, Text, Drill Objects:<br />
<br />
[[File:H_D_process.png]]<br />
<br />
5. Profit!<br />
<br />
== How do I move a Project? ==<br />
<br />
# Zip up the contents of the C:/RepetrelProjects folder<br />
# Move it to a new computer<br />
# Unzip it in the C:/RepetrelProjects folder<br />
<br />
== How do I hand-code a test pattern? ==<br />
<br />
This is not as hard as it seems - provided we start with basic understanding of how the printer operates. This gcode is for printers OTHER THAN the EHR, and for emulsion-based printing WITHOUT opting in to use E values with M229.<br />
<br />
1. Before starting, we always want to do some things explicitly, regardless of what model:<br />
<br />
'''M107''' ; fans/UV ; off<br />
'''M106 C255''' ; fans/UV ; use 0-255 range<br />
'''G53''' ; clear offsets<br />
'''G21''' ; units ; mm<br />
'''G90''' ; coordinates ; absolute<br />
<br />
2. Before moving, we want to drop the bed for safety, and then home the X/Y:<br><br />
<span style="color: maroon;">Note: EHR users use different code here.<br />
<br />
'''G91''' ; coordinates ; relative ''(because we don't want to go to Z10, but Z 10 away from current position)''<br />
'''G0 Z10''' ; drop bed 10mm<br />
'''G92''' ; coordinates ; absolute<br />
'''G28 X0 Y0''' ; home ; X and Y<br />
<br />
3. Next, we want to take care of any temperature settings. M104/140 just set the temps for head/bed; M109/M190 set AND WAIT for these temps:<br />
<br />
'''M190 S80''' ; bed temp ; set and wait<br />
'''M109 T12 S240''' ; head temp ; set and wait ; second slot from left (TXX for tool VARIABLES)<br />
<br />
4. Finally, we want to assign which head will do the printing:<br />
<br />
'''T1''' ; active head ; second slot from left (TX for tool COMMANDS)<br />
<br />
5. Now, let's code a move to the start point. G0 is for "rapid" non-working (non-printing) moves:<br />
<br />
'''G0 Z0.5''' ; rapid move to put the head 0.5 mm above the build surface (assuming you have already set the Z-zero)<br />
'''G0 X50 Y25''' ; rapid move to put the head/bed positioning at X 50, Y 25, our starting point for this line<br />
'''G1 X50 Y175 E1''' ; extrusion move to the end point - in this case, moving in the Y axis only<br />
'''G1 X60 Y175''' ; extrusion-speed move (without extrusion) to start of next line - No E value means no extrusion<br />
'''G1 X60 Y25 E1''' ; extrusion move to the next end-point<br />
<br />
6. Easy enough, so now let's double the flow rate and increase the print temperature (and pause for the temp to change) for the next line:<br />
<br />
'''M221 T12 S2''' ; flow rate ; multiplier x2 (S2)<br />
'''M109 T12 S250''' ; head temp ; set and wait, second slot from left<br />
'''G1 X70 Y25''' ; extrusion-speed move (without extrusion) to start of next line<br />
'''G1 X70 Y175 E1''' ; extrusion move to the next end-point<br />
<br />
'''[[T_v4|Always refer to the correct chart for your T commands and T variables!]]'''<br />
<br />
== How do I pick the right recipes for this head? ==<br />
<br />
The recipes are not head-specific.<br />
<br />
# Pick (or create) a PRINT recipe with the proper nozzle inner diameter, layer thickness, and other physical properties that you want in your output.<br />
# Pick the PRINTER recipe that matches the printer type, tool position, and type (heated or unheated) head that you will print with.<br />
# Pick the EXTRUDER ONE FILAMENT recipe that matches the temperatures you wish to print under.<br />
<br />
== How do I dispense a Specific Amount? ==<br />
<br />
Because sometimes folks just want to dispense a set number of microliters. <br />
<br />
Remember, the links on the left can take you to frequently-sought pages.<br />
<br />
=== Dispense 1000 uL ===<br />
<br />
To dispense 1,000 uL, you can press the "Dispense 1000 ul" button on the OverRides page:<br />
<br />
[[File:OverRides-2022.png|100px]]<br />
<br />
But if that's not working... read on.<br />
<br />
=== Prime (some) uL ===<br />
<br />
Another option: you can read the Pulses/ul value (in this case, 65) and put it times (however many uL you want) in the Steps field of the Prime page (where 3000 is shown here) and then click "PRIME NOW!!!":<br />
<br />
[[File:Prime-2022.png|100px]]<br />
<br />
=== M722 (Prime) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M722 (Prime) command in: '''M722 E65000 T12 I1''' and then execute it with a right click:<br />
<br />
[[File:Send-M722.png|600px]]<br />
<br />
For more about this command, see [[Gcode#M722_Set_Prime_Values]]<br />
<br />
=== M723 (Manual Extrusion) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M723 (Manual Extrusion) command in: '''M723 E65000 T12''' and then execute it with a right click:<br />
<br />
[[File:Send-M723.png|600px]]<br />
<br />
For more about this command, see Gcode#M723_Set_Manual_Flow<br />
<br />
== How do I configure for mixing materials? ==<br />
<br />
We have various ways of mixing materials. <br />
<br />
Please tell me:<br />
<br />
# How many separate parts do you need to mix?<br />
# Are they at ambient temperature, heated, or cooled?<br />
# Are they roughly the same viscosity?<br />
# What is the total volume of each part?<br />
# Fixed or changing ratios?<br />
# Static or active blending?<br />
<br />
This will help me guide you to the best configuration for your materials.<br />
<br />
== How do I understand these v4 errors? ==<br />
<br />
So, if your gcode is just for one head, which isn't specified, and you only have one head loaded, Repetrel always has and will still print with that head (you just need to acknowledge the warnings first).<br />
<br />
Our newer recipes, available from '''[[Slicing]]''', includes these commands for single-head prints. If you have moved into multi-head prints and need assistance in specifying this info, please contact Davo for some instruction.<br />
<br />
=== ERROR_TX_QUEUE_FULL ===<br />
<br />
This means that between your print speed, nozzle width, and layer thickness, we can't spin the dispensing motor that fast.<br />
<br />
Solution? Change the motor to 1/2 step mode (vs 1/16 step mode) and divide the pulses per microliter by 4. Also divide the prime/umprime steps and time by 4. Save changes.<br />
<br />
<br />
=== Missing Tx Argument ===<br />
<br />
However, not coding the tool to be used is unacceptable in the CNC world, and we want people to get used to coding in their tool assignments. And yes, it should say Tx command, not Tx argument.<br />
<br />
As detailed at the very top of the '''[[Gcode|Gcode Page]]''', you should use a '''T#''' command, where # is the slot of the tool you will use, starting with '''T0''' for the left most slot, '''T1''' for the second from the left, etc. Failure to do this will pop up this warning:<br />
<br />
[[File:Tx.png]]<br />
<br />
This is non-fatal; you can just hit enter or click "OK" and continue, but we want to encourage you to specify which tool to use.<br />
<br />
=== Heads Not Installed ===<br />
<br />
So, you've bypassed (or didn't get) that first error, and now you get another error:<br />
<br />
[[File:Inst.png]]<br />
<br />
This means that when your file was loaded, it was scanned for any '''Tx''' commands - but when you pressed print, the tool positions occupied on the printer don't match the tool assignments in the gcode. Again, this is non-fatal, and if you know your setup is correct, you can hit enter or click "Yes". But, again, we want you to know that the configuration detected on the printer does not match the configuration specified in the gcode.<br />
<br />
=== But It Matches! ===<br />
<br />
So, perhaps you've gotten these errors, and then edited your gcode file to specify '''T1''', which matches the slot where your head is loaded. Well, we don't scan the gcode a second time 'unless your right-click in the gcode and select "refresh gcode"' - doing this will eliminate getting this message after you have edited in the assignment:<br />
<br />
[[File:Refresh.png|250px]]<br />
<br />
=== How do I know which T parameter to use? ===<br />
<br />
Awesome question. We know it can be confusing, and that's why we have pages explaining just that!<br />
<br />
For Repetrel version 4 and earlier, please see '''[[T v4]]'''.<br />
<br />
For Repetrel version 5 and later, please see '''[[T v5]]''', where we've simplified this!<br />
<br />
=== My "NEW" machine just lost one of its axes or heads! ===<br />
<br />
With the new CANBUS-controlled motors, introduced in 2021, it turns out we have a little bit too much termination, and if you're using multiple heads you will have to remove the '''R25''' CANBUS termination resistor from one (or, better yet, all) of the heads. This is easy - just hit it with a hot soldering iron and it should pop off. Click image for larger version.<br />
<br />
[[File:103_remove_r25.jpg|400px]]<br />
<br />
== How do I get past the NAN error? ==<br />
<br />
If you slice your STL and get "NAN" errors, these mean "Not A Number", and mean that your STL file wasn't completely manifold - the software could not determine, logically, the division between "solid" and "void" space. This is often caused when software intended for rendering things on-screen lack the precision to model for additive manufacturing. Many times this can be corrected by using MeshLab (or another program) and healing the model - ensuring that all the intersections for the triangular mesh of the STL line up, forming an "air tight" mesh. See https://www.youtube.com/watch?v=eLGIRAgLz4w for instructions.<br />
<br />
This also applies to "unable to close this loop" errors during slicing.<br />
<br />
== How do I get rid of an M660 setting? ==<br />
<br />
If you accidentally run an EHR gcode on another model, and you've stored the M660 Z offset, then just change the H1 (or whichever you set) to 0, run it again to invoke it and set it to 0, and then just don't invoke any H offset values, since they are only used on the EHR.<br />
<br />
== How should I understand that E Value? ==<br />
<br />
For most printers, the number after the E means how much material to Extrude.<br />
<br />
On our printers, if you are on v4 and you use the M229 E1 D1 command (explained on the '''[[Gcode]]''' page, click on '''Controlling Material Flow''' and then on '''M229'''), then this E number, generated by the slicer, is how much VOLUME of material to extrude during each G1 move that has an E value.<br />
<br />
Also on our printers, if you are on v3 or earlier, or if you are on v4 and you do NOT specify M229 E1 D1, then we will use the presence of an E value simply to determine if this move should have material extruded or not; then we will calculate what rate to extrude at based on your nozzle diameter, layer thickness, and F value (movement speed in mm/min). This is explained on the '''[[Flow Rate]]''' page.<br />
<br />
I personally recommend '''USING the M229 E1 D1''' if you are printing with thermoplastics, as some slicers adjust this E value for thicker lines (or layers).<br />
<br />
I personally recommend '''NOT USING the M229 E1 D1''' if you are printing with liquids, gels, or clays, as these shapes very rarely have overhangs or bridges.<br />
<br />
==How do I create or import the files for the part I want?==<br />
<br />
You can create your stl file with most of the popular cad packages, such as SolidWorks, AutoCad, Alibre, FreeCad, Google SketchUp, ProE, TurboCad, etc.<br />
<br />
We bring the .stl file into MeshLab to heal the file (remove reference lines, resolve duplicate vertices, etc.).<br />
<br />
Then we bring the healed .stl file into Slic3r to slice it (convert it into the G-code that drives the printer). We will provide typical Slic3r recipes (temperature, flow rate, movement speed, layer thickness, etc.) for filaments and extrudables.<br />
<br />
Then we use our very customized version of Repitier Host, which drives the printer to create your part using the G-code from Slic3r.<br />
<br />
==How do I generate a constant frequency PWM at 400Hz+?==<br />
<br />
1. Set the head type to "Laser_6" and save the settings:<br><br />
[[File:Set_laser_6.png]]<br />
<br />
2. Pull the PWM signal from the PA2 or PA3 pins on the 10-pin programming connector:<br><br />
[[File:103_PA2_PA3.png|300px]]<br />
<br />
<br />
==How do I understand these LEDs?==<br />
<br />
This is the STM 103 board, and the LEDs function like this; also watch this video: https://www.youtube.com/watch?v=ROpcvqS_r8s&ab_channel=HyRel<br />
<br />
[[File:HH_LEDS.png]]<br />
<br />
== Why does my motor grind on the Filament? ==<br />
<br />
Standard causes and solutions for the motor grinding on the filament (and not advancing it as rapidly as needed):<br />
<br />
{| border="1" class="wikitable sortable" style="width: 85%;"<br />
|+ Filament Grinding<br />
! style="width: 45%;" | Possible Cause<br />
! style="width: 35%;" | Suggested Fix<br />
|-<br />
|colspan="2"| Friction or resistance on the delivery path before the motor shaft, including things like:<br />
|-<br />
| tangled spool <br> kinked filament <br> sharp entrance angle where filament enters guide tubing <br> kinked tubing.<br />
| untangle <br> unkink <br> make gentler angle <br> unkink<br />
|-<br />
|colspan="2"| Friction or resistance on the exit path after the motor shaft, including things like:<br />
|-<br />
| Filament not fully melting fast enough for the demanded throughput. <br> Nozzle too narrow for the demanded throughput. <br> Nozzle too close to build surface, causing back pressure.<br />
| Try higher temperature, thinner layers, and/or slower print speed. <br> Try extra torque head, or suggestions above. <br> Reestablish Z-zero positioning.<br />
|-<br />
| Buildup on drive shaft hobs (teeth).<br />
| Use vacuum or air pressure to clean out the hobs for optimal filament engagement and drive.<br />
|-<br />
|}<br />
<br />
== Why does my bed or head read 1023°C or 1024°C? ==<br />
<br />
Well, when we flash the head (or bed) controller settings, the type of RTD is not updated. <br />
<br />
Pleae go into the head (or bed) controller settings, change all RTD types to "1k_PLAT" or "1k_PRTD" (depends on your version), and then flash the settings to the device with a right-click, "flash head settings", and click OK.<br />
<br />
Click "reset" in the upper right of Repetrel if needed; your device should now be reporting the proper temperature.<br />
<br />
NOTE: If you have an ESR or 30M, the '''BED''' RTD types should be set to "50K". Also, a few heads from 2015 and earlier may have a different type - please try each one until you find the one that works.<br />
<br />
== Why does my ESR/30M Bed read 426C? ==<br />
<br />
If you have an ESR or 30M from 2020 or earlier, and we have sent you a new replacement hotbed (in 2021 or later), that printer and hotbed now have a resistor mismatch. GET WITH US and we'll walk you through fixing this.<br />
<br />
==Why doesn't my 30M or ESR bed heat up?==<br />
<br />
If you're on a 30M or an ESR, then the red LED on the bed should light up any time we send (heating) current to the bed. If it does not, then there is a bad fuse or a bad connection.<br />
<br />
The 15A fuse is located inside the X-arm:<br />
<br />
[[File:Xbed_fuse_15a.png|250px]]<br />
<br />
Check for 12V from ground to each side of this fuse.<br />
<br />
No 12V anywhere? The primary fuse on the spine has probably blown, or there is a bad connection.<br />
<br />
12V on one side, but not the other? This fuse has blown.<br />
<br />
12V on both sides? The fuse is fine, but you have a bad connection between here and the hotbed itself.<br />
<br />
Email us if you need help.<br />
<br />
== Why is my head/bed flashing red? ==<br />
<br />
All units should be upgraded to the latest version when it is available. If you run a head with v2 settings on a v3 or later install, the background will FLASH RED; this DOES NOT mean that you need to flash new FIRMWARE - this DOES mean that you need to flash new VALUES to the head. Please make the changes noted for each head and right-click-flash these values on your heads as shown in '''[[Firmware#Head_.2F_Bed_Settings|these instructions]]'''.<br />
<br />
== What Maintenance Should I Do? ==<br />
<br />
The majority of our motion bearings come from PMI, and here are their recommendations:<br />
http://www.pmi-amt.com/en/products/amt_options.htm<br />
<br />
You can use a grease or an appropriate liquid oil. You can buy the manufacturer's oil applicator, but other machine oils such as "sewing machine oil" should be fine.<br />
<br />
Oil is definitely the simplest. Just spread a few drops on the rail after wiping off all debris.<br />
<br />
Other than cleanliness (and a low-humidity environment), no other maintenance is required unless some problem arises.<br />
<br />
== How do I slice for 4th- or 4th-and-5th-axis machining? ==<br />
<br />
We normally do it by hand, but we also recommend [https://simplycad.blogspot.com/ SimplyCAD], which his free.<br />
<br />
== Why doesn't one head work? ==<br />
<br />
Actually, it's probably not the head, but the tool position. Try the head in another position. See below.<br />
<br />
== Why doesn't one tool position work? ==<br />
<br />
If you have one slote (or more) in which no heads heat up or advance material, but these heads work on other slots, you've probably blown one fuse (or more). These are easy to replace:<br />
<br />
=== You'll need to ensure that this is the problem: ===<br />
# Power down.<br />
# Remove the silver Phillips screws so that you can lift the upper yoke board up and pull it back, out of the way.<br />
# Check for resistance from one side of each fuse to the other (see blue arrows). Any fuse with 0 Ohms is good, but anything greater is blown. <br />
<br />
==== New Style ====<br />
<br />
From around 2016 on, we've been using fuse holders, which allow easy replacement:<br />
<br />
[[File:Yoke_fuses_new.png|300px]] (click to enlarge)<br />
<br />
These can be reordered from [https://www.digikey.com/en/products/detail/bel-fuse-inc/SSQ-4/615088 Digi-Key], or directly through us.<br />
<br />
[[File:4a_yoke_fuse_ss.png|300px]] (click to enlarge)<br />
<br />
==== Old Style ====<br />
<br />
Units from before 2016 may have fuses soldered in place:<br />
<br />
[[File:Yoke_fuse_old.png|300px]]<br />
<br />
These can be reordered from [http://www.digikey.com/product-detail/en/C1Q 4/507-1084-1-ND/615045 Digi-Key], or directly through us.<br />
<br />
[[File:Old_4a_yoke_fuse_ss.png|300px]] (click to enlarge)<br />
<br />
=== Replace the Fuse ===<br />
<br />
Replace the old, blown fuse with a new one (you may opt for a larger fuse, but only 15 amps maximum is sent to the yoke) by either simply swapping them out (new ones) or using a soldering iron to remove the old and attach the new (older ones). See images, above.<br />
<br />
Power up and test!<br />
<br />
== What fuses do you use? ==<br />
<br />
General package type is: Surface Mount 2-SMD, Square End Block<br />
0.240" L x 0.100" W x 0.110" H (6.10mm x 2.54mm x 2.79mm)<br />
<br />
There are 3 fuse ratings we use:<br />
* 5A: for most heads and 5V rail<br />
* 8A: high current heads like Tambora (replaces the 5A fuse in the yoke position)<br />
* 15A: 12V power bus<br />
<br />
Fast blow (recommended, especially for 5v rail/USB):<br />
* 5A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679L5000-01/5844017<br />
* 8A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679H8000-05/6139776<br />
* 15A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679H9150-01/6139759<br />
<br />
Slow Blow (use if you have blown a fuse while using a device like a spindle tool with a high inrush current):<br />
* 5A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0680L5000-05/10440930<br />
* 8A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0680L8000-05/10440943<br />
* 15A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0683G9150-01/15282999<br />
<br />
<br />
<br />
<br />
== How do I make this head work again? ==<br />
<br />
There are several things that might be wrong, so here's the full list:<br />
<br />
=== Ensure there is Power ===<br />
<br />
Do other heads work in this tool position? Does this head work in other tool positions?<br />
<br />
If the problem is with this tool position, you probably have a blown 4 Amp fuse - see '''[https://hyrel3d.com/wiki/index.php/How_do_I...#Why_doesn.27t_one_tool_position_work.3F these instructions]'''.<br />
<br />
<br />
If the problem is with the head, read on...<br />
<br />
=== Seat the Head ===<br />
<br />
The heads won't work unless all 16 pins on the connector on the head controller are properly seated into the connector on the yoke.<br />
<br />
# With the head unloaded, loosen the two screws on the back by about 90-180 degrees - just enough to be able to wiggle the circuit board.<br />
# Push your emergency stop in, load the head as far down as it will go, and then tighten the thumbscrew (or, on Hydras, the set screw with the 3mm hex driver - called a thumbscrew hereafter).<br />
# Now seat the circuit board so that it makes full contact along the entire connector; improper seating may turn the LEDs on without providing power.<br />
# Seat the spacer board all the way down, and tighten the screws.<br />
<br />
=== Flash the Firmware ===<br />
<br />
Sometimes the head can lose part of its firmware, so let's reload that with '''[https://hyrel3d.com/wiki/index.php/Firmware#Head_.2F_Bed_Firmware these instructions]'''.<br />
<br />
=== Store the Head Settings ===<br />
<br />
Sometimes the head can lose some of its settings, so let's reload them with '''[https://hyrel3d.com/wiki/index.php/Firmware#Head_.2F_Bed_Settings these instructions]'''.<br />
<br />
== What's that Clicking? ==<br />
<br />
When you hear clicking from a filament head, and material isn't coming out properly, it means that the head cannot advance the material as fast as the gcode demands. Possible causes and solutions:<br />
<br />
=== Mechanical or Logical? ===<br />
<br />
'''Question:''' Is this a problem with throughput in general, or with this print in particular?<br />
<br />
'''Investigation:''' Position the head above the bed (in mid air) and at print temp (240°C for ABS, 210°C for PLA, etc.); attempt to manually advance material at 500 pulses/second (500 on the screen). <br />
<br />
'''Answer 1:''' If this does not work, you have some mechanical issue - go to Case 1: Mechanical.<br />
<br />
'''Answer 2:''' If this works, your head is functioning normally, but we'll need to adjust your parameters - go to Case 2: Logical.<br />
<br />
'''Answer 3:''' If you cannot bring the head to the proper temperature for printing, we have a heating issue - go to Case 3: Heating.<br />
<br />
==== Case 1: Mechanical ====<br />
<br />
'''Most Common Cause:''' Input Problems. <br />
<br />
'''Most Common Solution:''' Find and remove cause of input restriction. Please ensure that there is smooth, low-friction delivery from the spool, through the pneumatic fitting on the chassis, through the PTFE tubing, through the pneumatic fitting on the head, and into the Feed Chamber on the head. There should be no bends or kinks or sharp angles, and no dragging across sharp surfaces. Filament should inter interior PTFE shaft after passing the drive shaft, centered on the hobs (gearing) and pressed firmly (but not too tightly) by two bearings separated by a washer. If you've disassembled and reassembled this part, ensure that this bearing rod is not flipped.<br />
<br />
'''Less Common Cause:''' Output Problems.<br />
<br />
'''Less Common Solution:''' Find and remove the cause of the output restriction. While rare (we do test prints with every head and every printer before shipping them), it's possible that some foreign material made its way into the fusion chamber or melting zone of the nozzle. Please follow instructions above for changing and cleaning nozzles, but replace the same nozzle.<br />
<br />
==== Case 2: Logical ====<br />
<br />
'''Most Common Cause:''' Temperature is too low for this combination of Material, Layer Thickness, and/or Print Speed.<br />
<br />
'''Resolution:''' Use a higher temperature and/or thinner layers and/or slower print speeds.<br />
<br />
'''Less Common Cause:''' If on first layer, perhaps Z-zero is wrong and nozzle is too close to build surface.<br />
<br />
'''Resolution:''' Ensure bed is level; recalibrate Z-zero.<br />
<br />
==== Case 3: Heating ====<br />
<br />
If the head is not reaching temperature, or not maintaining temperature, we need to find out why:<br />
<br />
Is the head set to the right temperature? Just look at the GUI to tell. If it cannot be set to the right temperature, some settings are wrong. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
Does the head reach the right temperature? Again, check the GUI. If the head is set properly, but does not warm up, we'll need to check to see if it's getting 12VDC. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
Does the head stay at the right temperature? Right, GUI again. If the head is set to temp, but later becomes set to a lower temp (or turned off), I'll need to examine your settings and gcode. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
== What's the Reset Button? ==<br />
<br />
The Reset button will clear and reestablish communications between the motion controller (the STM407 on the ESR and 30M, or the STM429 on the EHR and Hydra). This doesn't necessarily happen with a reboot, so sometimes we want to be sure it happens; but it's not a panic button, and you shouldn't press it if you don't need to. It's a small button on the motion controller, but we configure another button as well.<br />
<br />
The internal button looks like this on the 407 (ESR, 30M):<br />
<br />
[[File:407_reset.png|400px|407]]<br />
<br />
The internal button looks like this on the 429 (EHR, Hydra):<br />
<br />
[[File:429_reset.png|400px|429]]<br />
<br />
The external button on the 30M is on the front panel, and looks like this:<br />
<br />
[[File:Power_reset.png|200px|30M]]<br />
<br />
The external button on the ESR and EHR is on the right side and looks like this; earlier models have a green or red button:<br />
<br />
[[File:Engine_reset.png|200px|Engines]]<br />
<br />
The remote button on the 16A is located inside, behind the control panel, and looks like this:<br />
<br />
[[File:16A_reset.png|200px|16A]]<br />
<br />
== What About Exhaust? ==<br />
<br />
We recommend at least 500 cfm or 850 m3/h of exhaust while lasering. You will find a 6 " or 150 mm circular exhaust port on the lower left side of the Hydra 16A printers.<br />
<br />
Most thermoplastics do better with a heated chamber, so you would not want to vent (or have a very slight negative pressure to minimize escaping fumes) while printing with some materials (every material is different), but you may want to evacuate the air in the chamber after a print has completed. For this reason, an exhaust regulator with variable settings is probably the best solution.<br />
<br />
== How can I make Spindle Tool Gcode? ==<br />
<br />
We recommend SimplyCAM, a great, inexpensive program from https://www.mr-soft.net/en/scam.html<br />
<br />
== How should that Microprocessor be Set? ==<br />
<br />
Your motion controller (<span style="color: green;">green '''STM407''' on ESR and 30M printers</span>, or <span style="color: blue;">blue '''STM32''' on Hydra and EHR printers</span>) has two switches.<br />
<br />
<span style="color: red;">The '''BOOT CONFIG''' switch can be set to '''SYSTEM''' (usually up or left - sometimes needed for flashing firmware) or '''FLASH''' (usually down or right). '''It should be set to FLASH for normal operations.'''</span><br />
<br />
<span style="color: purple;">The unlabeled power switch can be set to '''USB''' (usually left or down - you should not need to use this setting) or '''5Vin'''. '''It should be set to 5Vin for normal operations.'''</span><br />
<br />
<span style="color: dodgerblue;">Note the '''RESET''' button, shown here above the USB connector and the LED. '''You need to RESET after changing any switch positions.''' All current printers also have a '''RESET''' button on the outside or inside of the chassis.</span><br />
<br />
Images:<br />
<br />
[[File:407_switches.jpg|500px]] [[File:429_switches.jpg|500px]]</div>Davohttps://hyrel3d.com/wiki/index.php?title=How_do_I...&diff=7767How do I...2024-03-06T20:45:46Z<p>Davo: /* How do I change nozzles or clean nozzles? */</p>
<hr />
<div>[[Category:HowTo]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== How do I adjust the settings? ==<br />
<br />
This is pretty easy, once you know the flow.<br />
<br />
# You set the recipes for the parameters (extrusion width, infill patterns/density, print speed, layer thickness, head/bed temperatures, etc.; save the recipes (with descriptive names - don't overwrite the originals), and close the recipe editor.<br />
# You highlight your properly scaled, positioned, rotated stl and select the print, printer, and extruder (filament) recipes to use, and go to Process > Slice with Slic3r.<br />
# You review your gcode to ensure that you got what you were hoping to get; review the layer-by-layer rendering as well as the actual settings for temperature, layer thickness (Z moves and M756 flow settings), etc.<br />
# You load the print head. Default settings from the head are displayed in Repetrel.<br />
# You ensure that the data on the print head reflect your preheat temperature (if any) and proper nozzle diameter (and prime/unprime settings if your custom material requires adjustment) - these settings should be flashed to the head.<br />
# You do any preparation (preheating, bed treatment, priming material, etc).<br />
# You press Print. Upon pressing print, the following happens:<br />
## Head settings are sent from repetrel to the printer.<br />
## Gcode is sent from repetrel to the printer. Since gcode is sent second, this will overwrite any head-based settings if gcode has different values<br />
<br />
<br />
== How do I run a different language? ==<br />
<br />
<span style="color: red;">'''YOU DON'T - IT WILL BREAK REPETREL!'''</span> You can change the language of repetrel, but if you operate the computer on another language the "," and "." will be wrong and nothing will work. Trust me.<br />
<br />
<br />
== How do I set Z-zero on Multiple Heads? ==<br />
<br />
Please watch this video: https://www.youtube.com/watch?v=IQscrgv6uaQ<br />
<br />
If you still have questions, contact Davo.<br />
<br />
== How do I change the home location? ==<br />
<br />
You don't. The X and Y home positions are X0 and Y0, and are determined by sensors. But you can apply an offset. See G54-59 on the [[Gcode]] page.<br />
<br />
Note, on the EHR there is a Z home sensor, which is at Z120. To set Z offsets on the EHR, see M660 on the [[Gcode]] page.<br />
<br />
== How do I change the park location? ==<br />
<br />
Note, if you set park for head 4, then head 2 will be 70mm off. Each position is 35 *mm from the next. *70 mm between first and second slots on ESR/30M.<br />
<br />
1. Load the head you want to set this for in the slot you want to set it for.<br />
<br />
2. Record the absolute X and Y positions:<br />
<br />
[[File:Abs-pos.png|250px]]<br />
<br />
3. Open Settings > Printer:<br />
<br />
[[File:Settings-printer.png|250px]]<br />
<br />
4. Enter the recorded X and Y values:<br />
<br />
[[File:Park-pos.png|250px]]<br />
<br />
5. Click "Flash Motion Settings", then "Apply", then "OK":<br />
<br />
[[File:Flash-apply-ok.png|250px]]<br />
<br />
== How do I change the Baud Rate? ==<br />
<br />
So, on (roughly) version 4.2.4x (aka 42.4x) or later, you can actually set Repetrel AND the printer to use a Baud rate of 115,200 (versus the default 38,400) - but you have to set this on the printer as well as in Repetrel:<br />
<br />
* On the right side of the program , go to Interface > COM<br />
* Select the rate you want to change to (115,200)<br />
* HOLD THE SHIFT KEY and click "Apply"<br />
<br />
You should now be connected at the new rate.<br />
<br />
== How do I change nozzles or clean nozzles? ==<br />
<br />
Carefully:<br />
# Heat to the printing temperature of the material loaded.<br />
# Move the manual lever to the left, retracting material until it is free of the advancement gear, then remove by hand.<br />
# Turn off heat to the head and remove it from the yoke.<br />
# With a 1/4" driver or wrench, remove the nozzle.<br />
# Inspect the nozzle cavity for any stray material; if found, remove with tweezers, solvent, air pressure or other means.<br />
# The old nozzle can be cleaned with a fine drill bit the same size as (or slightly smaller than) the nozzle diameter; some users also soak the nozzle in an appropriate solvent to remove all material.<br />
# With a 1/4" driver or wrench, attach the new nozzle.<br />
# Use normal procedure for heating and loading filament.<br />
<br />
== How do I change nozzle sizes? ==<br />
<br />
There are two places where we consider nozzle size:<br />
<br />
1. On the head, we use the number you have for nozzle diameter to make our flow calculations. See [[Flow Rate]] for details about how we determine how fast to spin the motor so that you get the proper volume per second of deposition. This image is for printing with a 14# (fourteen gauge, or 1.6mm ID) luer needle:<br />
<br />
[[File:H_N_mat_tab.png]]<br />
<br />
2. In the recipe, we use the extrusion width numbers to determine how far apart to place each bead of material. We expect your extrusion width to be 10% wider than your nozzle diameter (to allow for a nice sandbag-shaped cross section). This image is for printing with a 14# (fourteen gauge, or 1.6mm ID) luer needle:<br />
<br />
[[File:H_N_slicer.png]]<br />
<br />
This applies to everything we print, from PLA to Porcelain to PEEK.<br />
<br />
Please note that we do NOT use any other variable relating to nozzle diameter. Not Bridge Flow Ratio. Not Nozzle Diameter. Not Extrusion Multiplier. All of these variables affect the E values in your gcode. Which we then ignore.<br />
<br />
<br />
== How do I convert DXF files to gcode? ==<br />
<br />
1. In Project Composer, open your DXF:<br />
<br />
[[File:H_D_loaddxf.png]]<br />
<br />
2. On the Slicer tab, double click in the text box next to drill-laser, and select the recipe:<br />
<br />
[[File:H_D_dlrecipe.png]]<br />
<br />
3. On the Prams tab, configure the head and settings to use:<br />
<br />
[[File:H_D_prams.png]]<br />
<br />
4. Process > Process DXF, Text, Drill Objects:<br />
<br />
[[File:H_D_process.png]]<br />
<br />
5. Profit!<br />
<br />
== How do I move a Project? ==<br />
<br />
# Zip up the contents of the C:/RepetrelProjects folder<br />
# Move it to a new computer<br />
# Unzip it in the C:/RepetrelProjects folder<br />
<br />
== How do I hand-code a test pattern? ==<br />
<br />
This is not as hard as it seems - provided we start with basic understanding of how the printer operates. This gcode is for printers OTHER THAN the EHR, and for emulsion-based printing WITHOUT opting in to use E values with M229.<br />
<br />
1. Before starting, we always want to do some things explicitly, regardless of what model:<br />
<br />
'''M107''' ; fans/UV ; off<br />
'''M106 C255''' ; fans/UV ; use 0-255 range<br />
'''G53''' ; clear offsets<br />
'''G21''' ; units ; mm<br />
'''G90''' ; coordinates ; absolute<br />
<br />
2. Before moving, we want to drop the bed for safety, and then home the X/Y:<br><br />
<span style="color: maroon;">Note: EHR users use different code here.<br />
<br />
'''G91''' ; coordinates ; relative ''(because we don't want to go to Z10, but Z 10 away from current position)''<br />
'''G0 Z10''' ; drop bed 10mm<br />
'''G92''' ; coordinates ; absolute<br />
'''G28 X0 Y0''' ; home ; X and Y<br />
<br />
3. Next, we want to take care of any temperature settings. M104/140 just set the temps for head/bed; M109/M190 set AND WAIT for these temps:<br />
<br />
'''M190 S80''' ; bed temp ; set and wait<br />
'''M109 T12 S240''' ; head temp ; set and wait ; second slot from left (TXX for tool VARIABLES)<br />
<br />
4. Finally, we want to assign which head will do the printing:<br />
<br />
'''T1''' ; active head ; second slot from left (TX for tool COMMANDS)<br />
<br />
5. Now, let's code a move to the start point. G0 is for "rapid" non-working (non-printing) moves:<br />
<br />
'''G0 Z0.5''' ; rapid move to put the head 0.5 mm above the build surface (assuming you have already set the Z-zero)<br />
'''G0 X50 Y25''' ; rapid move to put the head/bed positioning at X 50, Y 25, our starting point for this line<br />
'''G1 X50 Y175 E1''' ; extrusion move to the end point - in this case, moving in the Y axis only<br />
'''G1 X60 Y175''' ; extrusion-speed move (without extrusion) to start of next line - No E value means no extrusion<br />
'''G1 X60 Y25 E1''' ; extrusion move to the next end-point<br />
<br />
6. Easy enough, so now let's double the flow rate and increase the print temperature (and pause for the temp to change) for the next line:<br />
<br />
'''M221 T12 S2''' ; flow rate ; multiplier x2 (S2)<br />
'''M109 T12 S250''' ; head temp ; set and wait, second slot from left<br />
'''G1 X70 Y25''' ; extrusion-speed move (without extrusion) to start of next line<br />
'''G1 X70 Y175 E1''' ; extrusion move to the next end-point<br />
<br />
'''[[T_v4|Always refer to the correct chart for your T commands and T variables!]]'''<br />
<br />
== How do I pick the right recipes for this head? ==<br />
<br />
The recipes are not head-specific.<br />
<br />
# Pick (or create) a PRINT recipe with the proper nozzle inner diameter, layer thickness, and other physical properties that you want in your output.<br />
# Pick the PRINTER recipe that matches the printer type, tool position, and type (heated or unheated) head that you will print with.<br />
# Pick the EXTRUDER ONE FILAMENT recipe that matches the temperatures you wish to print under.<br />
<br />
== How do I dispense a Specific Amount? ==<br />
<br />
Because sometimes folks just want to dispense a set number of microliters. <br />
<br />
Remember, the links on the left can take you to frequently-sought pages.<br />
<br />
=== Dispense 1000 uL ===<br />
<br />
To dispense 1,000 uL, you can press the "Dispense 1000 ul" button on the OverRides page:<br />
<br />
[[File:OverRides-2022.png|100px]]<br />
<br />
But if that's not working... read on.<br />
<br />
=== Prime (some) uL ===<br />
<br />
Another option: you can read the Pulses/ul value (in this case, 65) and put it times (however many uL you want) in the Steps field of the Prime page (where 3000 is shown here) and then click "PRIME NOW!!!":<br />
<br />
[[File:Prime-2022.png|100px]]<br />
<br />
=== M722 (Prime) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M722 (Prime) command in: '''M722 E65000 T12 I1''' and then execute it with a right click:<br />
<br />
[[File:Send-M722.png|600px]]<br />
<br />
For more about this command, see [[Gcode#M722_Set_Prime_Values]]<br />
<br />
=== M723 (Manual Extrusion) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M723 (Manual Extrusion) command in: '''M723 E65000 T12''' and then execute it with a right click:<br />
<br />
[[File:Send-M723.png|600px]]<br />
<br />
For more about this command, see Gcode#M723_Set_Manual_Flow<br />
<br />
== How do I configure for mixing materials? ==<br />
<br />
We have various ways of mixing materials. <br />
<br />
Please tell me:<br />
<br />
# How many separate parts do you need to mix?<br />
# Are they at ambient temperature, heated, or cooled?<br />
# Are they roughly the same viscosity?<br />
# What is the total volume of each part?<br />
# Fixed or changing ratios?<br />
# Static or active blending?<br />
<br />
This will help me guide you to the best configuration for your materials.<br />
<br />
== How do I understand these v4 errors? ==<br />
<br />
So, if your gcode is just for one head, which isn't specified, and you only have one head loaded, Repetrel always has and will still print with that head (you just need to acknowledge the warnings first).<br />
<br />
Our newer recipes, available from '''[[Slicing]]''', includes these commands for single-head prints. If you have moved into multi-head prints and need assistance in specifying this info, please contact Davo for some instruction.<br />
<br />
=== ERROR_TX_QUEUE_FULL ===<br />
<br />
This means that between your print speed, nozzle width, and layer thickness, we can't spin the dispensing motor that fast.<br />
<br />
Solution? Change the motor to 1/2 step mode (vs 1/16 step mode) and divide the pulses per microliter by 4. Also divide the prime/umprime steps and time by 4. Save changes.<br />
<br />
<br />
=== Missing Tx Argument ===<br />
<br />
However, not coding the tool to be used is unacceptable in the CNC world, and we want people to get used to coding in their tool assignments. And yes, it should say Tx command, not Tx argument.<br />
<br />
As detailed at the very top of the '''[[Gcode|Gcode Page]]''', you should use a '''T#''' command, where # is the slot of the tool you will use, starting with '''T0''' for the left most slot, '''T1''' for the second from the left, etc. Failure to do this will pop up this warning:<br />
<br />
[[File:Tx.png]]<br />
<br />
This is non-fatal; you can just hit enter or click "OK" and continue, but we want to encourage you to specify which tool to use.<br />
<br />
=== Heads Not Installed ===<br />
<br />
So, you've bypassed (or didn't get) that first error, and now you get another error:<br />
<br />
[[File:Inst.png]]<br />
<br />
This means that when your file was loaded, it was scanned for any '''Tx''' commands - but when you pressed print, the tool positions occupied on the printer don't match the tool assignments in the gcode. Again, this is non-fatal, and if you know your setup is correct, you can hit enter or click "Yes". But, again, we want you to know that the configuration detected on the printer does not match the configuration specified in the gcode.<br />
<br />
=== But It Matches! ===<br />
<br />
So, perhaps you've gotten these errors, and then edited your gcode file to specify '''T1''', which matches the slot where your head is loaded. Well, we don't scan the gcode a second time 'unless your right-click in the gcode and select "refresh gcode"' - doing this will eliminate getting this message after you have edited in the assignment:<br />
<br />
[[File:Refresh.png|250px]]<br />
<br />
=== How do I know which T parameter to use? ===<br />
<br />
Awesome question. We know it can be confusing, and that's why we have pages explaining just that!<br />
<br />
For Repetrel version 4 and earlier, please see '''[[T v4]]'''.<br />
<br />
For Repetrel version 5 and later, please see '''[[T v5]]''', where we've simplified this!<br />
<br />
=== My "NEW" machine just lost one of its axes or heads! ===<br />
<br />
With the new CANBUS-controlled motors, introduced in 2021, it turns out we have a little bit too much termination, and if you're using multiple heads you will have to remove the '''R25''' CANBUS termination resistor from one (or, better yet, all) of the heads. This is easy - just hit it with a hot soldering iron and it should pop off. Click image for larger version.<br />
<br />
[[File:103_remove_r25.jpg|400px]]<br />
<br />
== How do I get past the NAN error? ==<br />
<br />
If you slice your STL and get "NAN" errors, these mean "Not A Number", and mean that your STL file wasn't completely manifold - the software could not determine, logically, the division between "solid" and "void" space. This is often caused when software intended for rendering things on-screen lack the precision to model for additive manufacturing. Many times this can be corrected by using MeshLab (or another program) and healing the model - ensuring that all the intersections for the triangular mesh of the STL line up, forming an "air tight" mesh. See https://www.youtube.com/watch?v=eLGIRAgLz4w for instructions.<br />
<br />
This also applies to "unable to close this loop" errors during slicing.<br />
<br />
== How do I get rid of an M660 setting? ==<br />
<br />
If you accidentally run an EHR gcode on another model, and you've stored the M660 Z offset, then just change the H1 (or whichever you set) to 0, run it again to invoke it and set it to 0, and then just don't invoke any H offset values, since they are only used on the EHR.<br />
<br />
== How should I understand that E Value? ==<br />
<br />
For most printers, the number after the E means how much material to Extrude.<br />
<br />
On our printers, if you are on v4 and you use the M229 E1 D1 command (explained on the '''[[Gcode]]''' page, click on '''Controlling Material Flow''' and then on '''M229'''), then this E number, generated by the slicer, is how much VOLUME of material to extrude during each G1 move that has an E value.<br />
<br />
Also on our printers, if you are on v3 or earlier, or if you are on v4 and you do NOT specify M229 E1 D1, then we will use the presence of an E value simply to determine if this move should have material extruded or not; then we will calculate what rate to extrude at based on your nozzle diameter, layer thickness, and F value (movement speed in mm/min). This is explained on the '''[[Flow Rate]]''' page.<br />
<br />
I personally recommend '''USING the M229 E1 D1''' if you are printing with thermoplastics, as some slicers adjust this E value for thicker lines (or layers).<br />
<br />
I personally recommend '''NOT USING the M229 E1 D1''' if you are printing with liquids, gels, or clays, as these shapes very rarely have overhangs or bridges.<br />
<br />
==How do I create or import the files for the part I want?==<br />
<br />
You can create your stl file with most of the popular cad packages, such as SolidWorks, AutoCad, Alibre, FreeCad, Google SketchUp, ProE, TurboCad, etc.<br />
<br />
We bring the .stl file into MeshLab to heal the file (remove reference lines, resolve duplicate vertices, etc.).<br />
<br />
Then we bring the healed .stl file into Slic3r to slice it (convert it into the G-code that drives the printer). We will provide typical Slic3r recipes (temperature, flow rate, movement speed, layer thickness, etc.) for filaments and extrudables.<br />
<br />
Then we use our very customized version of Repitier Host, which drives the printer to create your part using the G-code from Slic3r.<br />
<br />
==How do I generate a constant frequency PWM at 400Hz+?==<br />
<br />
1. Set the head type to "Laser_6" and save the settings:<br><br />
[[File:Set_laser_6.png]]<br />
<br />
2. Pull the PWM signal from the PA2 or PA3 pins on the 10-pin programming connector:<br><br />
[[File:103_PA2_PA3.png|300px]]<br />
<br />
<br />
==How do I understand these LEDs?==<br />
<br />
This is the STM 103 board, and the LEDs function like this; also watch this video: https://www.youtube.com/watch?v=ROpcvqS_r8s&ab_channel=HyRel<br />
<br />
[[File:HH_LEDS.png]]<br />
<br />
== Why does my motor grind on the Filament? ==<br />
<br />
Standard causes and solutions for the motor grinding on the filament (and not advancing it as rapidly as needed):<br />
<br />
{| border="1" class="wikitable sortable" style="width: 85%;"<br />
|+ Filament Grinding<br />
! style="width: 45%;" | Possible Cause<br />
! style="width: 35%;" | Suggested Fix<br />
|-<br />
|colspan="2"| Friction or resistance on the delivery path before the motor shaft, including things like:<br />
|-<br />
| tangled spool <br> kinked filament <br> sharp entrance angle where filament enters guide tubing <br> kinked tubing.<br />
| untangle <br> unkink <br> make gentler angle <br> unkink<br />
|-<br />
|colspan="2"| Friction or resistance on the exit path after the motor shaft, including things like:<br />
|-<br />
| Filament not fully melting fast enough for the demanded throughput. <br> Nozzle too narrow for the demanded throughput. <br> Nozzle too close to build surface, causing back pressure.<br />
| Try higher temperature, thinner layers, and/or slower print speed. <br> Try extra torque head, or suggestions above. <br> Reestablish Z-zero positioning.<br />
|-<br />
| Buildup on drive shaft hobs (teeth).<br />
| Use vacuum or air pressure to clean out the hobs for optimal filament engagement and drive.<br />
|-<br />
|}<br />
<br />
== Why does my bed or head read 1023°C or 1024°C? ==<br />
<br />
Well, when we flash the head (or bed) controller settings, the type of RTD is not updated. <br />
<br />
Pleae go into the head (or bed) controller settings, change all RTD types to "1k_PLAT" or "1k_PRTD" (depends on your version), and then flash the settings to the device with a right-click, "flash head settings", and click OK.<br />
<br />
Click "reset" in the upper right of Repetrel if needed; your device should now be reporting the proper temperature.<br />
<br />
NOTE: If you have an ESR or 30M, the '''BED''' RTD types should be set to "50K". Also, a few heads from 2015 and earlier may have a different type - please try each one until you find the one that works.<br />
<br />
== Why does my ESR/30M Bed read 426C? ==<br />
<br />
If you have an ESR or 30M from 2020 or earlier, and we have sent you a new replacement hotbed (in 2021 or later), that printer and hotbed now have a resistor mismatch. GET WITH US and we'll walk you through fixing this.<br />
<br />
==Why doesn't my 30M or ESR bed heat up?==<br />
<br />
If you're on a 30M or an ESR, then the red LED on the bed should light up any time we send (heating) current to the bed. If it does not, then there is a bad fuse or a bad connection.<br />
<br />
The 15A fuse is located inside the X-arm:<br />
<br />
[[File:Xbed_fuse_15a.png|250px]]<br />
<br />
Check for 12V from ground to each side of this fuse.<br />
<br />
No 12V anywhere? The primary fuse on the spine has probably blown, or there is a bad connection.<br />
<br />
12V on one side, but not the other? This fuse has blown.<br />
<br />
12V on both sides? The fuse is fine, but you have a bad connection between here and the hotbed itself.<br />
<br />
Email us if you need help.<br />
<br />
== Why is my head/bed flashing red? ==<br />
<br />
All units should be upgraded to the latest version when it is available. If you run a head with v2 settings on a v3 or later install, the background will FLASH RED; this DOES NOT mean that you need to flash new FIRMWARE - this DOES mean that you need to flash new VALUES to the head. Please make the changes noted for each head and right-click-flash these values on your heads as shown in '''[[Firmware#Head_.2F_Bed_Settings|these instructions]]'''.<br />
<br />
== What Maintenance Should I Do? ==<br />
<br />
The majority of our motion bearings come from PMI, and here are their recommendations:<br />
http://www.pmi-amt.com/en/products/amt_options.htm<br />
<br />
You can use a grease or an appropriate liquid oil. You can buy the manufacturer's oil applicator, but other machine oils such as "sewing machine oil" should be fine.<br />
<br />
Oil is definitely the simplest. Just spread a few drops on the rail after wiping off all debris.<br />
<br />
Other than cleanliness (and a low-humidity environment), no other maintenance is required unless some problem arises.<br />
<br />
== How do I slice for 4th- or 4th-and-5th-axis machining? ==<br />
<br />
We normally do it by hand, but we also recommend [https://simplycad.blogspot.com/ SimplyCAD], which his free.<br />
<br />
== Why doesn't one head work? ==<br />
<br />
Actually, it's probably not the head, but the tool position. Try the head in another position. See below.<br />
<br />
== Why doesn't one tool position work? ==<br />
<br />
If you have one slote (or more) in which no heads heat up or advance material, but these heads work on other slots, you've probably blown one fuse (or more). These are easy to replace:<br />
<br />
=== You'll need to ensure that this is the problem: ===<br />
# Power down.<br />
# Remove the silver Phillips screws so that you can lift the upper yoke board up and pull it back, out of the way.<br />
# Check for resistance from one side of each fuse to the other (see blue arrows). Any fuse with 0 Ohms is good, but anything greater is blown. <br />
<br />
==== New Style ====<br />
<br />
From around 2016 on, we've been using fuse holders, which allow easy replacement:<br />
<br />
[[File:Yoke_fuses_new.png|300px]] (click to enlarge)<br />
<br />
These can be reordered from [https://www.digikey.com/en/products/detail/bel-fuse-inc/SSQ-4/615088 Digi-Key], or directly through us.<br />
<br />
[[File:4a_yoke_fuse_ss.png|300px]] (click to enlarge)<br />
<br />
==== Old Style ====<br />
<br />
Units from before 2016 may have fuses soldered in place:<br />
<br />
[[File:Yoke_fuse_old.png|300px]]<br />
<br />
These can be reordered from [http://www.digikey.com/product-detail/en/C1Q 4/507-1084-1-ND/615045 Digi-Key], or directly through us.<br />
<br />
[[File:Old_4a_yoke_fuse_ss.png|300px]] (click to enlarge)<br />
<br />
=== Replace the Fuse ===<br />
<br />
Replace the old, blown fuse with a new one (you may opt for a larger fuse, but only 15 amps maximum is sent to the yoke) by either simply swapping them out (new ones) or using a soldering iron to remove the old and attach the new (older ones). See images, above.<br />
<br />
Power up and test!<br />
<br />
== What fuses do you use? ==<br />
<br />
General package type is: Surface Mount 2-SMD, Square End Block<br />
0.240" L x 0.100" W x 0.110" H (6.10mm x 2.54mm x 2.79mm)<br />
<br />
There are 3 fuse ratings we use:<br />
* 5A: for most heads and 5V rail<br />
* 8A: high current heads like Tambora (replaces the 5A fuse in the yoke position)<br />
* 15A: 12V power bus<br />
<br />
Fast blow (recommended, especially for 5v rail/USB):<br />
* 5A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679L5000-01/5844017<br />
* 8A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679H8000-05/6139776<br />
* 15A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0679H9150-01/6139759<br />
<br />
Slow Blow (use if you have blown a fuse while using a device like a spindle tool with a high inrush current):<br />
* 5A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0680L5000-05/10440930<br />
* 8A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0680L8000-05/10440943<br />
* 15A: https://www.digikey.com/en/products/detail/bel-fuse-inc/0683G9150-01/15282999<br />
<br />
<br />
<br />
<br />
== How do I make this head work again? ==<br />
<br />
There are several things that might be wrong, so here's the full list:<br />
<br />
=== Ensure there is Power ===<br />
<br />
Do other heads work in this tool position? Does this head work in other tool positions?<br />
<br />
If the problem is with this tool position, you probably have a blown 4 Amp fuse - see '''[https://hyrel3d.com/wiki/index.php/How_do_I...#Why_doesn.27t_one_tool_position_work.3F these instructions]'''.<br />
<br />
<br />
If the problem is with the head, read on...<br />
<br />
=== Seat the Head ===<br />
<br />
The heads won't work unless all 16 pins on the connector on the head controller are properly seated into the connector on the yoke.<br />
<br />
# With the head unloaded, loosen the two screws on the back by about 90-180 degrees - just enough to be able to wiggle the circuit board.<br />
# Push your emergency stop in, load the head as far down as it will go, and then tighten the thumbscrew (or, on Hydras, the set screw with the 3mm hex driver - called a thumbscrew hereafter).<br />
# Now seat the circuit board so that it makes full contact along the entire connector; improper seating may turn the LEDs on without providing power.<br />
# Seat the spacer board all the way down, and tighten the screws.<br />
<br />
=== Flash the Firmware ===<br />
<br />
Sometimes the head can lose part of its firmware, so let's reload that with '''[https://hyrel3d.com/wiki/index.php/Firmware#Head_.2F_Bed_Firmware these instructions]'''.<br />
<br />
=== Store the Head Settings ===<br />
<br />
Sometimes the head can lose some of its settings, so let's reload them with '''[https://hyrel3d.com/wiki/index.php/Firmware#Head_.2F_Bed_Settings these instructions]'''.<br />
<br />
== What's that Clicking? ==<br />
<br />
When you hear clicking from a filament head, and material isn't coming out properly, it means that the head cannot advance the material as fast as the gcode demands. Possible causes and solutions:<br />
<br />
=== Mechanical or Logical? ===<br />
<br />
'''Question:''' Is this a problem with throughput in general, or with this print in particular?<br />
<br />
'''Investigation:''' Position the head above the bed (in mid air) and at print temp (240°C for ABS, 210°C for PLA, etc.); attempt to manually advance material at 500 pulses/second (500 on the screen). <br />
<br />
'''Answer 1:''' If this does not work, you have some mechanical issue - go to Case 1: Mechanical.<br />
<br />
'''Answer 2:''' If this works, your head is functioning normally, but we'll need to adjust your parameters - go to Case 2: Logical.<br />
<br />
'''Answer 3:''' If you cannot bring the head to the proper temperature for printing, we have a heating issue - go to Case 3: Heating.<br />
<br />
==== Case 1: Mechanical ====<br />
<br />
'''Most Common Cause:''' Input Problems. <br />
<br />
'''Most Common Solution:''' Find and remove cause of input restriction. Please ensure that there is smooth, low-friction delivery from the spool, through the pneumatic fitting on the chassis, through the PTFE tubing, through the pneumatic fitting on the head, and into the Feed Chamber on the head. There should be no bends or kinks or sharp angles, and no dragging across sharp surfaces. Filament should inter interior PTFE shaft after passing the drive shaft, centered on the hobs (gearing) and pressed firmly (but not too tightly) by two bearings separated by a washer. If you've disassembled and reassembled this part, ensure that this bearing rod is not flipped.<br />
<br />
'''Less Common Cause:''' Output Problems.<br />
<br />
'''Less Common Solution:''' Find and remove the cause of the output restriction. While rare (we do test prints with every head and every printer before shipping them), it's possible that some foreign material made its way into the fusion chamber or melting zone of the nozzle. Please follow instructions above for changing and cleaning nozzles, but replace the same nozzle.<br />
<br />
==== Case 2: Logical ====<br />
<br />
'''Most Common Cause:''' Temperature is too low for this combination of Material, Layer Thickness, and/or Print Speed.<br />
<br />
'''Resolution:''' Use a higher temperature and/or thinner layers and/or slower print speeds.<br />
<br />
'''Less Common Cause:''' If on first layer, perhaps Z-zero is wrong and nozzle is too close to build surface.<br />
<br />
'''Resolution:''' Ensure bed is level; recalibrate Z-zero.<br />
<br />
==== Case 3: Heating ====<br />
<br />
If the head is not reaching temperature, or not maintaining temperature, we need to find out why:<br />
<br />
Is the head set to the right temperature? Just look at the GUI to tell. If it cannot be set to the right temperature, some settings are wrong. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
Does the head reach the right temperature? Again, check the GUI. If the head is set properly, but does not warm up, we'll need to check to see if it's getting 12VDC. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
Does the head stay at the right temperature? Right, GUI again. If the head is set to temp, but later becomes set to a lower temp (or turned off), I'll need to examine your settings and gcode. Please contact me, hyrel3d@gmail.com or 404-914-1748.<br />
<br />
== What's the Reset Button? ==<br />
<br />
The Reset button will clear and reestablish communications between the motion controller (the STM407 on the ESR and 30M, or the STM429 on the EHR and Hydra). This doesn't necessarily happen with a reboot, so sometimes we want to be sure it happens; but it's not a panic button, and you shouldn't press it if you don't need to. It's a small button on the motion controller, but we configure another button as well.<br />
<br />
The internal button looks like this on the 407 (ESR, 30M):<br />
<br />
[[File:407_reset.png|400px|407]]<br />
<br />
The internal button looks like this on the 429 (EHR, Hydra):<br />
<br />
[[File:429_reset.png|400px|429]]<br />
<br />
The external button on the 30M is on the front panel, and looks like this:<br />
<br />
[[File:Power_reset.png|200px|30M]]<br />
<br />
The external button on the ESR and EHR is on the right side and looks like this; earlier models have a green or red button:<br />
<br />
[[File:Engine_reset.png|200px|Engines]]<br />
<br />
The remote button on the 16A is located inside, behind the control panel, and looks like this:<br />
<br />
[[File:16A_reset.png|200px|16A]]<br />
<br />
== What About Exhaust? ==<br />
<br />
We recommend at least 500 cfm or 850 m3/h of exhaust while lasering. You will find a 6 " or 150 mm circular exhaust port on the lower left side of the Hydra 16A printers.<br />
<br />
Most thermoplastics do better with a heated chamber, so you would not want to vent (or have a very slight negative pressure to minimize escaping fumes) while printing with some materials (every material is different), but you may want to evacuate the air in the chamber after a print has completed. For this reason, an exhaust regulator with variable settings is probably the best solution.<br />
<br />
== How can I make Spindle Tool Gcode? ==<br />
<br />
We recommend SimplyCAM, a great, inexpensive program from https://www.mr-soft.net/en/scam.html<br />
<br />
== How should that Microprocessor be Set? ==<br />
<br />
Your motion controller (<span style="color: green;">green '''STM407''' on ESR and 30M printers</span>, or <span style="color: blue;">blue '''STM32''' on Hydra and EHR printers</span>) has two switches.<br />
<br />
<span style="color: red;">The '''BOOT CONFIG''' switch can be set to '''SYSTEM''' (usually up or left - sometimes needed for flashing firmware) or '''FLASH''' (usually down or right). '''It should be set to FLASH for normal operations.'''</span><br />
<br />
<span style="color: purple;">The unlabeled power switch can be set to '''USB''' (usually left or down - you should not need to use this setting) or '''5Vin'''. '''It should be set to 5Vin for normal operations.'''</span><br />
<br />
<span style="color: dodgerblue;">Note the '''RESET''' button, shown here above the USB connector and the LED. '''You need to RESET after changing any switch positions.''' All current printers also have a '''RESET''' button on the outside or inside of the chassis.</span><br />
<br />
Images:<br />
<br />
[[File:407_switches.jpg|500px]] [[File:429_switches.jpg|500px]]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Cloning_and_Mixing&diff=7766Cloning and Mixing2024-03-06T14:30:11Z<p>Davo: /* Mixing */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Cloning heads is when two heads will both execute the exact same gcode at the exact same time.<br />
<br />
Mixing heads like the SMH-2 and DMH-2 each take the output from two other heads and blend them through static (SMH) or dynamic (DMH) blending baffles or blades, with final deposition of a (hopefully) homogeneous blend.<br />
<br />
Whether you're mixing your output or not, step one is to clone the heads.<br />
<br />
[[File:Positions.jpg|750px]]<br />
<br />
<br />
=== Cloning ===<br />
<br />
<span style="color: red;">'''NOTE: M703 DOES NOT WORK WITH M229 E1 D1. YOU MUST USE M229 E0 D0, and use our native flow calculations instead of E values'''<br />
<br />
Clone, slave, or parallel printing, is when one head makes a normal print, and another head makes the ''exact same print'' at the same time.<br />
<br />
We will normally execute a T command first, to establish the primary or master head (generally the one to the left). Then the M703 command, cloning or slaving another head to the first. <br />
<br />
Remember, this is how we address the tool positions; note that the 30M and ESR have four positions, not five. Counting from the leftmost position:<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ T Commands and T Variables for Standard Addresses<br />
|-<br />
! style="width: 15%;" | Command<br />
! style="width: 15%;" | <span style="color: red;">1st Slot</span><br />
! style="width: 15%;" | 2nd Slot<br />
! style="width: 15%;" | <span style="color: royalblue;">3rd Slot</span><br />
! style="width: 15%;" | 4th Slot<br />
! style="width: 15%;" | <span style="color: limegreen;">5th Slot</span><br />
|-<br />
! Tool Change<br />
| <span style="color: red;">'''T0'''</span><br />
| T1<br />
| T2<br />
| T3<br />
| T4<br />
|-<br />
! Clone Address<br />
| T11<br />
| T12<br />
| <span style="color: royalblue;">'''T13'''</span><br />
| T14<br />
| <span style="color: limegreen;">'''T15'''</span><br />
|-<br />
! Master Address<br />
| <span style="color: red;">'''S11'''</span><br />
| S12<br />
| S13<br />
| S14<br />
| S15<br />
|-<br />
|}<br />
<br />
In the following example we have a five-position yoke; commands executed by the head in <span style="color: red;">'''slot 1''' (far left)</span> will also be executed by the heads in both <span style="color: royalblue;">'''slot 3''' (third from left)</span> and <span style="color: limegreen;">'''slot 5''' (fifth from left)</span>:<br />
<br />
<span style="color: red;">T0</span><br />
M703 <span style="color: royalblue;">T13</span> <span style="color: red;">S11</span><br />
M703 <span style="color: limegreen;">T15</span> <span style="color: red;">S11</span><br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* <span style="color: red;">'''T0''' - Assign commands to Position 1 (the far left head on yoke 1)</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: royalblue;">'''T13''' - Tool Position 3 </span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: limegreen;">'''T15''' - Tool Position 5</span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
Note that only Hydra (16A) and High Resolution Engine (EHR) units have five tool positions; other models have four only. See '''Understanding the T''' at the top of '''[[Gcode|the Gcode page]]''' for tool position nomenclature.<br />
<br />
=== Mixing ===<br />
<br />
Now that you have the cloning set up, it's time to do the mixing. Connect the pneumatic tubing to direct the flow from the two supply heads to the mixing head.<br />
<br />
The Static Mixing Head is easy - connect and you're done.<br />
<br />
The Dynamic Mixing Head requires air pressure (to spin the blades) and an electrical connection (wires provided) to the primary head, to activate the flow valves for printing and non-printing moves. It also takes a command to control blade spinning speed.<br />
<br />
Remember, this is how we address the tool positions; note that the 30M and ESR have four positions, not five. Counting from the leftmost position:<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ T Variables for Standard Addresses<br />
|-<br />
! style="width: 15%;" | Command<br />
! style="width: 15%;" | 1st Slot<br />
! style="width: 15%;" | <span style="color: magenta;">2nd Slot</span><br />
! style="width: 15%;" | 3rd Slot<br />
! style="width: 15%;" | <span style="color: orange;">4th Slot</span><br />
! style="width: 15%;" | 5th Slot<br />
|-<br />
! Variable<br />
| T11<br />
| <span style="color: magenta;">'''T12'''</span><br />
| T13<br />
| <span style="color: orange;">'''T14'''</span><br />
| T15<br />
|-<br />
|}<br />
<br />
<br />
In the following example we will dispense 25% of the material from slot 2 and 75% of the material from slot 4:<br />
<br />
M221 S0.25 <span style="color: magenta;">T12</span><br />
M221 S0.75 <span style="color: orange;">T14</span><br />
G4 P1<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
*'''M221''' - Update flow calculations<br />
** '''S0.25''' - Material Feed Rate Multiplier 0.25<br />
** <span style="color: magenta;">'''T12''' - On yoke 1, slot 2</span><br />
*'''M221''' - Update flow calculations<br />
** '''S0.75''' - Material Feed Rate Multiplier 0.75<br />
** <span style="color: orange;">'''T14''' - On yoke 1, slot 4</span><br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
At any point, we can change the ratios - in this example, we'll change the ratios to 80% slot 2, 20% slot 1:<br />
<br />
M221 S0.80 <span style="color: magenta;">T12 </span><br />
M221 S0.20 <span style="color: orange;">T14 </span><br />
G4 P1<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
*'''M221''' - Update flow calculations<br />
** '''S0.80''' - Material Feed Rate Multiplier 0.80<br />
** <span style="color: magenta;">'''T12''' - On yoke 1, slot 2</span><br />
*'''M221''' - Update flow calculations<br />
** '''S0.20''' - Material Feed Rate Multiplier 0.20<br />
** <span style="color: orange;">'''T14''' - On yoke 1, slot 4</span><br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)</div>Davohttps://hyrel3d.com/wiki/index.php?title=Gcode&diff=7765Gcode2024-03-06T14:28:25Z<p>Davo: /* M722 Set Prime Values */</p>
<hr />
<div><br />
<br />
__NOTOC__<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! Main Sections<br />
|-<br />
| [[#What_is_GCode.3F | What is GCode?]]<br />
|-<br />
| [[#Understanding_the_T | Understanding the T]]<br />
|-<br />
| [[#Most_Commonly_Edited_Gcodes | Most Commonly Edited GCodes]]<br />
|-<br />
| [[#Controlling_Movement | Controlling Movement]]<br />
|-<br />
| [[#Controlling_Temperature | Controlling Temperature]]<br />
|-<br />
| [[#Controlling_Material_Flow | Controlling Material Flow]]<br />
|-<br />
| [[#Controlling_Position_and_Offsets | Controlling Position and Offsets]]<br />
|-<br />
| [[#Controlling_Lasers_and_UV_Pens | Controlling Lasers and UV Pens]]<br />
|-<br />
| [[#Controlling_Spindles_and_Lathes | Controlling Spindles and Lathes]]<br />
|-<br />
| [[#Reporting_and_Diagnostics | Reporting and Diagnostics]]<br />
|-<br />
| [[#Controlling_Aux_Devices | Controlling Aux Devices]]<br />
|-<br />
| [[#Other_Commands| Other Commands]]<br />
|-<br />
| [[#Gcode_Header| Gcode Headers]]<br />
|-<br />
| [[#Gcode_Footer| Gcode Footer]]<br />
|-<br />
|}<br />
<br />
Note: Codes in Black are supported on version 4 and above (v4+), and most likely on version 3 as well.<br />
<br />
<span style="color:darkorange;">Note: Codes in Orange are supported on version 5 and above (v5+) only.<br />
<br />
Note that Repetrel versions prior to 4.2 can not properly process gcode with "tab" characters - tab was a reserved character.<br />
<br />
== What is GCode? ==<br />
<br />
'''Everything your Hyrel 3D Printer does is done by executing GCode''', whether you are aware of it or not. <br />
<br />
Every button you press on the screen sends a gcode to the printer.<br />
<br />
When you start a job (by pressing "Print"), the settings from your head are sent to the printer (including flow and prime/unprime values); then the gcode file is sent, line by line, to the printer.<br />
<br />
All parameters are persistent, so once they are set, they will remain in place unless or until you (or the file) sends a new, updated value (including setting to 0).<br />
<br />
Please note that there are many flavors of gcode, and while most have the same (or very similar) G0-G100 and M0-M100, codes above 100 are largely nonstandard.<br />
<br />
''It is important to remember that different variable letters can have different meanings, depending on the G- or M- code being used'' - '''''especially the T value.'''''<br />
<br />
The Table of Contents to the right lists the main categories of Gcodes.<br />
<br />
Below is a table listing them in numerical order (click '''Expand''' to expand):<br />
<br />
{| border="1" class="wikitable mw-collapsible mw-collapsed"<br />
|+ Code_Chart<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_X,_Y_to_Physical_Home|G28]] <br />
| Yes || Send X, Y to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| Yes || Peck Drilling<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#M619_Map_Aux_Port|M619]] <br />
| Yes || Map Aux Port<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Set Unprime Values<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Set Prime Values<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
=== '''Header Explained''' ===<br />
<br />
Please visit [[GCode Header]] for a detailed description of our standard GCode headers.<br />
<br />
== '''Understanding the T''' ==<br />
<br />
A '''T Command''' changes which head has the focus of the motion controller and is executing the gcode. Each of our printers have at least four tool positions.<br />
<br />
The use of T commands and variables changes greatly (for the better) with the jump to version 5 from the previous versions.<br />
<br />
Please see '''[[T_v4]]''' for CURRENT (v4 and earlier) use, where the nomenclature for '''T Commands''' and the '''T Variables''' are not the same.<br />
<br />
We will use a '''T#''' in the descriptions below to avoid confusion; please find the correct designation for your version by following the links above.<br />
<br />
== '''Most Commonly Edited Gcodes''' ==<br />
<br />
Below are the gcodes users should first become familiar with. <br />
<br />
=== Tool Changes ===<br />
<br />
'''T0''' tells the printer to perform extrusion (or emission) from the tool in the far left position<br><br />
'''T1''' tells the printer to perform extrusion (or emission) from the tool in the second-from-left position<br><br />
'''T2''' tells the printer to perform extrusion (or emission) from the tool in the third-from-left position<br><br />
'''T3''' tells the printer to perform extrusion (or emission) from the tool in the fourth-from-left position<br><br />
'''T4''' tells the printer to perform extrusion (or emission) from the tool in the fifth-from-left position (if available)<br />
<br />
=== Movement ===<br />
<br />
'''G0''' for "rapid", non-printing moves<br><br />
'''G1''' for "working speed" moves, which may be printing (with E value) or non-printing (no E value)<br />
<br />
=== Temperature ===<br />
<br />
'''M104''' to set head temp<br><br />
'''M109''' to set and wait for head temp<br><br />
'''M140''' to set bed temp<br><br />
'''M190''' to set and wait for bed temp<br />
<br />
=== Others ===<br />
<br />
Which commands to learn from here will depend on what the user intends to do with the equipment.<br />
<br />
== '''Controlling Movement''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Movement<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
|}<br />
<br />
=== G0 Rapid Move ===<br />
<br />
G0 is a rapid positioning move. It is not a ''working'' move, meaning that your equipment will not be printing, milling, lasering, or doing any other active work during a G0 move. G0 is intended to move your tool to a new position, where the work will happen. Accordingly, G0 movement speeds are set in your configuration settings, rather than being specified in your gcode file. <br />
<br />
Special note: a G0 command will take an F variable as a nonpersistent, one-time velocity setting. <br />
<br />
'''Usage'''<br />
G0 Xn Yn Zn An Bn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G0 X50 Y75 Z10<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G0''' (rapid (nonprinting) straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** '''Z10''' (10mm in the Z) <br />
** (no change in A)<br />
** (no change in B)<br />
** (no change in F, use settings-specified feed rate)<br />
<br><br />
<hr><br />
<br />
=== G1 Working Move ===<br />
<br />
G1 is a working move, during which you may be printing, milling, lasering, or doing other active work - provided an E (extrude) value is given. In native mode (if you don't add '''M229 E1 Dn''', the value of Extrusion rate E will be ignored, but E will trigger a working or printing move. In E-value mode (by adding '''M229 E1 Dn''', the slicer-determined E value will be used to control material flow. G1 moves are made at the rate indicated by the F (feed rate) value; if no F value is specified, the last F value set will be used. See '''[[#M229_Use_E_Values|M229]]''' for more details.<br />
<br />
'''Usage'''<br />
G1 Xn Yn Zn An Bn Fn Sn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''En''' is the cumulative E axis (extrusion) position to move (or advance) to<br />
'''Hn''' is the stored head offset to apply (see '''M660''' to store offsets)<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
'''Sn''' is a one-time (non-persistent) material flow rate multiplier (rarely used) applied to this move only<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases; there will be problems with an entire model sliced in relative mode. Relative is intended for special operations like drilling holes.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G1 X50 Y75 E1 F1800 H2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in A)<br />
** (no change in B)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoking offsets stored in register H2)<br />
** (no temporary scaling)<br />
<br />
<br><br />
<hr><br />
<br />
=== G2 Clockwise Arc ===<br />
<br />
A G2 move specifies a clockwise arc (or complete circle) from the current position to position (X,Y,Z)<sub>curr</sub> by following an arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J). <br />
<br />
'''Usage'''<br />
<br />
G2 Xn Yn Zn In Jn Fn En Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 F1800<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 S6<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** (using previously established F rate)<br />
** '''S6''' (made up of six sides - resulting in a hexagon with one point at the origin, with all corners inscribed on the circle)<br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G2-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G2-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G2-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G2-4.png]]<br><br />
Note, if no endpoints are defined, G2 will make a 360° circle by default.<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool1.png]]<br />
<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.1 Spiral CW Arc<sup>1</sup> ===<br />
<br />
A G2.1 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Effective ending X/Y is always the same as the current XY and is not specified (though the actual final position is a function of the number of laps, the pitch, and the reverse code. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). An important feature is the "reverse code" to allow the creation of frog toes without having to jump over the frog toe once it's made. <br />
<br />
'''Usage'''<br />
<br />
G2.1 Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Note: '''In''' and '''Jn''' both default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Pn''' is the pitch (how close the laps are) in mm (required)<br />
'''Ln''' is the number of laps to complete (must be a positive integer; you don't need to finish the spiral)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Rn''' is a flag; 0 to spiral in (default), 1 to spiral out (after inward jump), 2 spiral out from current position<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.1 I15 J20 P1.2 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** (complete all laps)<br />
** '''P1.2''' (1.2 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (use default R of 0, spiral in toward center from current location)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.1 Z10 I15 J20 P0.5 L50 E1 S9 R1 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''L50''' (complete no more than 50 laps)<br />
** '''P0.5''' (0.5 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''R1''' (spiral out from center to current location)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.1 I25 J0 P4 L3 E1 ; spiral in 3 laps, 4mm pitch <br />
G1 X14 E1 ; add connector for the arcs<br />
G2.1 I11 J0 P4 L3 E1 R2 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool2.1.png]]<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.2 Spiral CW Arc<sup>2</sup> ===<br />
<br />
A G2.2 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Unlike G2.1, G2.2 specifies final X/Y (and Z) location. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). Unlike G2.1, G2.2 does not require a reverse code as the direction of spiral is determined by the positional relationship of the current position, final position, and center position.<br />
<br />
'''Usage'''<br />
<br />
G2.2 Xn Yn Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Starting with Motion Controller firmware 4.203a:''<br />
''If I and J are both zero (center = start), path will spiral outward CCW from current to final position.''<br />
''If I and J match the end (center = end), path will spiral inward CW from current to final position."<br />
'''Pn''' is the pitch (how close the laps are) in mm (optional)<br />
'''Ln''' is the number of laps (or paths) to complete (you don't need to finish the spiral)<br />
''Note, if P and L values conflict, L will be modified to match what P will allow; at least one must be specified<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.2 I15 J20 P1 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (1mm between centers of travel of adjacent laps)<br />
** (complete all laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.2 Z10 I15 J20 P2 L50 E1 S9 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (2mm between centers of travel of adjacent laps)<br />
** '''L50''' (complete no more than 50 laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.2 X12 I25 P4 E1 ; spiral in 3 laps, 4mm pitch<br />
G1 X14 E1 ; add connector to next spiral<br />
G2.2 X2 I11 P4 E1 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode also generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.3 3-Space CW Arc ===<br />
<br />
A G2.3 move specifies a clockwise arc (or complete circle(s) from the current position to position (X,Y,Z)<sub>curr</sub> following a circular arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J, Z<sub>curr</sub>+K). Unlike G2, G2.1 and G2.2, G2.3 is not bound to the X/Y plane. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). <br />
'''Usage'''<br />
<br />
G2.3 Xn Yn Zn An Bn In Jn Kn Un Vn Wn Dn Pn En Sn Fn<br />
<br />
Note: If we are in G16 mode, Un, Vn, Wn define the vector normal to the work plane. If we are in G17 (X/Y plane) or G18 (X/Z plane) or G19 (Y/Z plane) mode, these are ignored.<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to end at<br />
'''Yn''' is the new Y position to end at<br />
'''Zn''' is the new Z position to end at<br />
'''An''' is the new A position to end at (4th axis)<br />
'''Bn''' is the new B position to end at (5th axis)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Kn''' is the '''''relative''''' distance from the current Z position to the center position about which to arc (default 0)<br />
''Note: '''In''', '''Jn''', and '''Kn''' all default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Un''' is the X component of a vector normal to the working plane (default 0)<br />
'''Vn''' is the Y component of a vector normal to the working plane (default 0) <br />
'''Wn''' is the Z component of a vector normal to the working plane (default 0)<br />
'''Dn''' is the overall displacement normal to the working plane for this element<br />
'''Pn''' is the pitch (how close the laps are normal to the working plane) in mm (default 0; one path, no incremental displacement)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3 Counterclockwise Arc ===<br />
<br />
Please refer to G2, above, for details. All options are identical, with the exception of direction (CCW). <br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G3-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G3-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G3-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G3-4.png]]<br><br />
Note, if no endpoints are defined, G3 will make a 360° circle by default.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.1 Spiral CCW Arc<sup>1</sup> ===<br />
<br />
Please refer to G2.1, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.2 Spiral CCW Arc<sup>2</sup> ===<br />
<br />
Please refer to G2.2, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.3 3-Space CCW Arc ===<br />
<br />
Please refer to G2.3, above, for details. All options are identical, with the exception of direction (CCW).<br />
<br />
<br><br />
<hr><br />
<br />
=== G4 Timed Pause ===<br />
<br />
G4 is a pause for a set number of seconds (S) or milliseconds (P). <br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
'''Usage'''<br />
<br />
G4 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the number of Seconds to pause<br />
'''Pn''' is the number of Milliseconds to pause<br />
<br />
You may use '''S''' or '''P''', or if you use both, the total value will be the pause duration.<br />
<br />
'''Example'''<br />
<br />
G4 S0.5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''S0.5''' (0.5 seconds)<br />
<br />
'''Example'''<br />
<br />
G4 P500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''P500''' (500 milliseconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== G16 Arc Plane: Any ===<br />
<br />
G16 permits free-form designation of points in space, without limiting them to an axial plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G16<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G16<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G16''' (allow element in any orientation) <br />
<br />
<br><br />
<hr><br />
<br />
=== G17 Arc Plane: XY ===<br />
<br />
G17 restricts this element to the X/Y plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G17''' (restrict element to X/Y plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G18 Arc Plane: XZ ===<br />
<br />
G18 restricts this element to the X/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G18''' (restrict element to X/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G19 Arc Plane: YZ ===<br />
<br />
G19 restricts this element to the Y/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G19<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G19<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G19''' (restrict element to Y/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== M0 Stop Until Resume ===<br />
<br />
M0 is a stop until resume command; text listed after a semicolon will be displayed, and clicking the '''Play''' button (which replaces the '''Pause''' button) will cause the job to resume. Note that all lines will be truncated at 100 characters.<br />
<br />
* ''';''' All text following the ''';''' will be echoed to the print mask (Control Tab).<br />
<br />
Additionally, an M0 command can also take the following parameters, and so will pause and then:<br />
<br />
'''Usage'''<br />
<br />
M0 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume)<br />
<br />
'''Example'''<br />
<br />
M0 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
=== M203 Set G0 Speed ===<br />
<br />
M203 will redesignate the rate at which [[#G0 Rapid Move|G0]] movements are executed. If undeclared, the values stored in Repetrel for your equipment will be used. These can be changed under '''Settings > Printer''', on the '''Printer''' tab. The values set on your unit are set based on testing; exceed them at your own risk.<br />
<br />
'''Usage'''<br />
<br />
M203 Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new speed in the X axis for G0 moves<br />
'''Yn''' is the new speed in the Y axis for G0 moves<br />
'''Zn''' is the new speed in the Z axis for G0 moves<br />
'''An''' is the new speed in the A axis for G0 moves<br />
'''Bn''' is the new speed in the B axis for G0 moves<br />
<br />
'''Example'''<br />
<br />
M203 Y2000<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M203''' (Set G0 Speed) <br />
** (X remains unchanged)<br />
** '''Y2000''' (Y axis: 2000mm/min)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== M674 Use Turbo Mode ===<br />
<br />
M674 will enable Turbo Mode, where certain non-printing (no E value) working (G1, G2, or G3) moves will be treated as G0 moves (executed at "rapid move speed" rather than "working move speed"). Killing a job will clear the M674 setting.<br />
<br />
'''Usage'''<br />
<br />
M674 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the minimum distance threshold for Turbo Mode to activate, and is required; no S value returns an error.<br />
<br />
'''Example 1'''<br />
<br />
M674 S2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S2''' (for moves of 2 mm or greater) <br />
<br />
'''Example 2'''<br />
<br />
M674 S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S50''' (for moves of 50 mm or greater)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Temperature''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Temperature<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
|}<br />
<br />
What's Hotbed 2 and Chamber 2? Well, our Hydra models have room to have a second hotbed, which could be a smaller, higher temperature hotbed, or a sub-ambient chilled bed, or even a High Resolution hotbed. And we've talked about having a smaller chamber inside the primary chamber, to bring the air around the print (but not the head) to much higher temperatures; call for details.<br />
<br />
<br><br />
<hr><br />
<br />
=== M104 Set Temp (Head) ===<br />
<br />
M104 sets the extruder temperature but does not pause the printer. <br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M104 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the tool assignment for this temperature command<br />
<br />
'''Example'''<br />
<br />
M104 T# S75 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M104''' (Set Temperature) <br />
** '''T#''' (target head)<br />
** '''S75''' (to 75°C)<br />
<br />
<br><br />
<hr><br />
<br />
=== M106 Set Cooling / Etc. ===<br />
<br />
M106 sets the cooling fan (or crosslinking LEDs) speed (or intensity). This also turns on the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M106 Cn<br />
<br />
or<br />
<br />
M106 T# Sn<br />
<br />
or <br />
<br />
M106 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head<br />
'''Sn''' is the percent of duty cycle for the cooling fan (or LEDs); default: 100<br />
'''Cn''' is the range (0-100 or 0-255) that we will use; if unspecified, the default is C100 (use C255 to be compatible with most slicers)<br />
'''Pn''' is the percent of duty cycle for the cooling fan (or LEDs) ''to come on only during extrusion moves''<br />
<br />
'''Example'''<br />
<br />
M106 C255<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** (on all tools)<br />
** (no speed)<br />
** '''C255''' (of range 0-255)<br />
<br />
Note, with this command, all following M106 commands for the rest of this print job will be based on this range (unless specified with a new C value).<br />
<br />
'''Example'''<br />
<br />
M106 T# S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''S50''' (target value of 50)<br />
** (previously defined (or default 0-100) range)<br />
<br />
'''Example'''<br />
<br />
M106 T# P100 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''P100''' (during extrusion moves at 100% duty cycle<br />
<br />
<span style="color: blue;">''But Davo, I want to cure a certain spot for 10 seconds with every layer change; how do I do this?''</span><br />
<br />
Easy. Edit your slicer recipe to add the following code after layer changes (edit as needed for duration, intensity, or position):<br />
<br />
;---- BEGIN COD CODE<br />
G91 ; relative moves<br />
G0 Z5 ; drop bed<br />
G90 ; absolute moves<br />
G0 X130 Y110 ; move into position<br />
M106 S100 T# ; turn on T# UV at 100%<br />
G1 X140 Y110 F100 ; move 10 mm in the X at 100 mm/min<br />
G1 X140 Y120 F100 ; move 10 mm in the Y at 100 mm/min<br />
G1 X130 Y120 F100 ; move -10 mm in the X at 100 mm/min<br />
G1 X130 Y110 F100 ; move -10 mm in the Y at 100 mm/min<br />
M106 S0 T# ; turn off T# UV (set it to 0%)<br />
;--- END COD GCODE<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (Use relative moves)<br />
* '''G0''' (Non-working move)<br />
** '''Z5''' (+5 mm in the Z)<br />
* '''G90''' (Use absolute moves)<br />
* '''G0''' (Non-working move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S100''' (100% duty)<br />
** '''T#''' (On target head)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S0''' (0% duty)<br />
** '''T#''' (On target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M107 Stop Cooling / Etc. ===<br />
<br />
M107 turns off the cooling fan (or crosslinking LEDs); this is essentially the same as an M106 S0 (setting it to 0 percent). This will also turn off the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M107 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (target head)<br />
<br />
'''Example'''<br />
<br />
M107 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M107''' (Set Cooling/LEDs to 0%) <br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M109 Wait for Temp (Head) ===<br />
<br />
M109 waits for the extruder to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) heads as options.<br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M109 T# Sn Hn Cn Ln Un Rn <span style="color:darkorange;">W0<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M109 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head - (required)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<span style="color:darkorange;">'''W0''' if present, will set the temp and advance to the next line without pause, but upon executing M116, will pause until temp is reached<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M109 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M109 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M109 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M109 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M109 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M109 R10<br />
<br />
* '''M109''' (wait for temp)<br />
** (no T# - use head with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<span style="color:darkorange;">'''Example 7'''<br />
<br />
<span style="color:darkorange;">M109 T# S240 W0<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M109''' (wait for temp) <br />
** <span style="color:darkorange;">'''T#''' (target head)<br />
** <span style="color:darkorange;">'''S240''' (and set temp to 240°C)<br />
** <span style="color:darkorange;">'''W0''' (but do not pause until M116 is executed)<br />
<br />
<br><br />
<hr><br />
<br />
=== <span style="color:darkorange;">M116 Wait for Temps (v5+)</span> ===<br />
<br />
<span style="color:darkorange;">M116 is supported with version 5.x and later (v5+) of Repetrel Software and Motion Controller Firmware.<br />
<br />
<span style="color:darkorange;">'''Usage'''<br />
<br />
<span style="color:darkorange;">M116 <br />
<br />
<span style="color:darkorange;">'''Parameters'''<br />
<br />
<span style="color:darkorange;">'none'<br />
<br />
<span style="color:darkorange;">'''Example'''<br />
<br />
<span style="color:darkorange;">M116<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M116''' (wait for any set temps (M109, M190, M191) with '''W0''' values before proceding<br />
<br />
<br><br />
<hr><br />
<br />
=== M140 Set Temp (Bed) ===<br />
<br />
M140 sets the bed temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M140 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target bed (default is the primary bed)<br />
<br />
'''Example'''<br />
<br />
M140 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M140''' (set bed temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary bed)<br />
<br />
<br><br />
<hr><br />
<br />
=== M141 Set Temp (Chamber) ===<br />
<br />
M141 sets the chamber temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M141 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target chamber (default is the primary chamber)<br />
<br />
'''Example'''<br />
<br />
M141 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M141''' (set chamber temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary chamber)<br />
<br />
<br><br />
<hr><br />
<br />
=== M190 Wait for Temp (Bed) ===<br />
<br />
M190 waits for the bed to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) beds as options.<br />
<br />
'''Usage'''<br />
<br />
M190 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M190 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (optional) is the target bed (default is the primary (or only) bed)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M190 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M190 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M190 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M190 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M190 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M190 R10<br />
<br />
* '''M190''' (wait for temp)<br />
** (no T# - use bed with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
=== M191 Wait for Temp (Chamber) ===<br />
M191 waits for the chamber to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) chambers as options.<br />
<br />
'''Usage'''<br />
<br />
M191 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M191 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target chamber (default is the primary (or only) chamber)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M191 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M191 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M191 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M191 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M191 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M191 R10<br />
<br />
* '''M191''' (wait for temp)<br />
** (no T# - use chamber with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Material Flow''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Material Flow<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Unprime or Retract<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Prime or Advance<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
|}<br />
<br />
You can specify flow rate variables in your gcode; we do not do this by default, but take these values from the head itself. Any values you stipulate in your gcode will supersede the values stored on the head. With our recipes the slicing program generates gcode which dictates temperature and movement commands and indicates which moves should dispense material (a G1 move with an E value). <br />
<br />
However, we have two different ways to control flow. <br />
<br />
* If you use '''M229 E1 D1''' we will use the E values generated by the slicer ''for printing moves, but we will always use the prime/unprime settings on the head for advancing and retracting when transitioning between printing and non-printing moves.'' This allows for varying extrusion widths and layer thicknesses (on the same layer - as with support material). This is how just about all slicers and printers work.<br />
<br />
* If you do not use that command, we do not use that E value (except to distinguish printing from non-printing moves) we calculate for flow based purely on travel speed, declared layer thickness, and nozzle diameter. This is explained at http://hyrel3d.net/wiki/index.php/Flow_Rate<br />
<br />
When a head is loaded, it sends this flow data (how to calculate flow, as well as how much to prime and unprime (advance and retract) material when transitioning between printing and non-printing moves - and even how many primes or unprimes to do in conjunction with a tool change.<br />
<br />
In this way, the very same gcode (with temperature changes) can be used with any material, provided you are using the same physical parameters that the model was sliced for.<br />
<br />
<br><br />
<hr><br />
<br />
=== G10 UNUSED<sup>1</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== G11 UNUSED ===<br />
<br />
G11 is not recognized by Repetrel. <br />
<br />
On some other printers, this will do an advance or unretract; we do this via '''M722'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== M82 Absolute E-Values ===<br />
<br />
M82 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the original (0) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M82<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M82<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M82''' (use absolute E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M83 Relative E-Values ===<br />
<br />
M83 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the relative (last used) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M83<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M83<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M83''' (use relative E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M221 Set Flow Rate ===<br />
<br />
M221 sends information to the printer about material flow.<br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
Note, our default mode is volumetric calculations; if you need to slice with linear calculations, multiply your Pn by approximately 2.4 (you can do the math).<br />
<br />
'''Usage'''<br />
<br />
M221 Pn Sn Wn Zn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the number of pulses on the motor to dispense 1 μl of material;<br />
'''Sn''' is the direct flow multiplier (to allow for undersized or oversized stock;<br />
'''Wn''' is the width of the cross section of the volume to fill;<br />
'''Zn''' is the height (layer thickness) of the cross section of the volume to fill; and<br />
'''T#''' is the tool (head) to which these values will be applied.<br />
As always, any parameters not specified will be inherited from your environment.<br />
<br />
'''Example'''<br />
<br />
M221 S1.0 T# P77 W0.5 Z0.3<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M221''' (set flow rate) <br />
** '''S1.0''' (flow multiplier of 1.0) <br />
** '''T#''' (target head) <br />
** '''P77''' (77 pulses per microliter) <br />
** '''W0.5''' (0.5mm nozzle) <br />
** '''Z0.3''' (0.3mm layer thickness - note that your gcode '''M756''' will overwrite this value)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
<br><br />
<hr><br />
<br />
=== M229 Use E Values ===<br />
<br />
'''Starting with version 4''', Hyrel will begin to enable the use of E-values in your gcode. Variable extrusion width and support/infill thickness slicers, rejoice! Note, calculations are done for every single move individually.<br />
<br />
'''Usage'''<br />
<br />
M229 En Dn Sn<br />
<br />
'''Parameters'''<br />
<br />
'''En''' can be 0 (native flow calculation) or 1 (use E values)<br />
'''Dn''' how directed to head; see below<br />
'''D0''' on head controller directly; constant flow, not adjusted for motion acceleration/deceleration<br />
'''D1''' on motion controller, sent to head via CANBUS and adjusted for motion acceleration/deceleration<br />
'''D2''' on motion controller, sent to head via C axis step pin and adjusted for motion acceleration/deceleration<br />
'''D3''' on motion controller, sent to head via CANBUS and C axis and adjusted for motion acceleration/deceleration<br />
'''Sn''' sets a threshold in seconds; isolated non-printing moves below this threshold will not trigger unprime/prime actions<br />
<br />
Note: E1 D0 is an illegal combination.<br />
<br />
'''Example 1'''<br />
<br />
M229 E1 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E1''' (enabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
''Above is the default way to enable E values.''<br />
<br />
'''Example 2'''<br />
<br />
M229 E0 D0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
<br />
''Above is the default way to ignore E values, and is how v3 and earlier releases work.''<br />
<br />
'''Example 3'''<br />
<br />
M229 E0 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
'''Example 4'''<br />
<br />
M229 E0 D0 S0.02<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning/Parallel Printing ===<br />
<br />
<span style="color: red;">'''NOTE: M703 DOES NOT WORK WITH M229 E1 D1. YOU MUST USE M229 E0 D0, and use our native flow calculations instead of E values'''<br />
<br />
Clone, slave, or parallel printing, is when one head makes a normal print, and another head makes the ''exact same print'' at the same time.<br />
<br />
We will normally execute a T command first, to establish the primary or master head (generally the one to the left). Then the M703 command, cloning or slaving another head to the first. <br />
<br />
Remember, this is how we address the tool positions; note that the 30M and ESR have four positions, not five. Counting from the leftmost position:<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ T Commands and T Variables for Standard Addresses<br />
|-<br />
! style="width: 15%;" | Command<br />
! style="width: 15%;" | <span style="color: red;">1st Slot</span><br />
! style="width: 15%;" | 2nd Slot<br />
! style="width: 15%;" | <span style="color: royalblue;">3rd Slot</span><br />
! style="width: 15%;" | 4th Slot<br />
! style="width: 15%;" | <span style="color: limegreen;">5th Slot</span><br />
|-<br />
! Tool Change<br />
| <span style="color: red;">'''T0'''</span><br />
| T1<br />
| T2<br />
| T3<br />
| T4<br />
|-<br />
! Clone Address<br />
| T11<br />
| T12<br />
| <span style="color: royalblue;">'''T13'''</span><br />
| T14<br />
| <span style="color: limegreen;">'''T15'''</span><br />
|-<br />
! Master Address<br />
| <span style="color: red;">'''S11'''</span><br />
| S12<br />
| S13<br />
| S14<br />
| S15<br />
|-<br />
|}<br />
<br />
In the following example we have a five-position yoke; commands executed by the head in <span style="color: red;">'''slot 1''' (far left)</span> will also be executed by the heads in both <span style="color: royalblue;">'''slot 3''' (third from left)</span> and <span style="color: limegreen;">'''slot 5''' (fifth from left)</span>:<br />
<br />
<span style="color: red;">T0</span><br />
M703 <span style="color: royalblue;">T13</span> <span style="color: red;">S11</span><br />
M703 <span style="color: limegreen;">T15</span> <span style="color: red;">S11</span><br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* <span style="color: red;">'''T0''' - Assign commands to Position 1 (the far left head on yoke 1)</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: royalblue;">'''T13''' - Tool Position 3 </span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: limegreen;">'''T15''' - Tool Position 5</span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
Note that only Hydra (16A) and High Resolution Engine (EHR) units have five tool positions; other models have four only. See '''Understanding the T''' at the top of '''[[Gcode|the Gcode page]]''' for tool position nomenclature.<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M721 Set Unprime Values ===<br />
<br />
M721 sends information to the printer about how much material to unprime (retract) when a transition from printing move to non-printing move is detected.<br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
'''Usage'''<br />
<br />
M721 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds prior to the end of the current printing move to begin the unprime (retract) action; a negative number initiates this before the end of the move<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M721 I1''' would execute an unprime with the previously specified values at that point in the gcode.<br />
<br />
'''Example 1'''<br />
<br />
M721 S10000 E100 P-15 T#<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
'''Example 2'''<br />
<br />
M721 T# I1<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
<br><br />
<hr><br />
<br />
=== M722 Set Prime Values ===<br />
<br />
M722 sends information to the printer about how much material to prime (advance) when a transition from non-printing move to printing move is detected. This is done primarily to compensate for an earlier unprime (retract), to prep the head to be ready to dispense.<br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
'''Usage'''<br />
<br />
M722 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds to dwell at the start of the next printing move to allow for the prime (advance) action<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M722 I1''' would execute a prime with the previously specified values at that point in the gcode.<br />
<br />
'''Example'''<br />
<br />
M722 S10000 E100 P-15 T#<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (prime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
'''Example'''<br />
<br />
M722 T# I1<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M722''' (prime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
<br><br />
<hr><br />
<br />
=== M723 Set Manual Flow ===<br />
<br />
M723 tells the designated extruder(s) to advance material for the specified number of pulses (on the motor) at the specified rate, regardless of any X/Y/Z movement. It is normally used only during manual operation, not during gcode execution. It can be used after moving to a location to dispense a set amount of material (like depositing material into reservoirs). We recommend adding a timed pause (G4) after the extrusion command if you want to extrude without moving.<br />
<br />
M723 is also used to activate and set speed on the stirring apparatus on the DMH dynamic mixing head.<br />
<br />
<br />
'''Usage'''<br />
<br />
M723 Sn En T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which the motor should advance, in pulses per second (default: 500);<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute (default of 65535 is essentially "forever");<br />
'''T#''' is the target head<br />
<br />
'''Example'''<br />
<br />
M723 S500 E50000 T#<br />
G4 S5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M723''' (start manual feed) <br />
** '''S500''' (at 500 pulses per second) <br />
** '''E50000''' (for 50000 pulses) <br />
** '''T#''' (target head)<br />
* '''G4''' (Timed pause) <br />
** '''S3''' (3 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M728 Set Motor Current Boost ===<br />
<br />
M728 will set the motor current boost; default is 0.<br />
<br />
'''Usage'''<br />
<br />
M728 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target head (or device)<br />
<br />
'''Example'''<br />
<br />
M728 T# S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M728''' (set motor current boost)<br />
** '''T#''' (target head)<br />
** '''S0''' (off)<br />
<br><br />
<hr><br />
<br />
=== M756 Set Height for Flow ===<br />
<br />
M756 will overwrite the Z value from the M221 command, allowing you to calculate flow for thinner or thicker layers. We declare M756 at the beginning of every layer; normally, they are all the same (unless you sliced for varying layer thicknesses). <br />
<br />
Note: this command is ignored if you are using '''M229 E1 D1''' to enable use of E values.<br />
<br />
Note: this does NOT change your Z position; see G0 or G1 for that.<br />
<br />
'''Usage'''<br />
<br />
M756 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the layer thickness in mm for flow calculations<br />
<br />
'''Example'''<br />
<br />
M756 S0.125<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M756''' (set layer height for flow calculations) <br />
** '''S0.125''' (at 0.125mm)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Position and Offsets''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Position and Offsets<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Set Offsets''<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_to_Physical_Home|G28]] <br />
| Yes || Send to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M702_-_M704_Cloning_Heads|M702-4]] <br />
| Yes || Cloning Heads<br />
|-<br />
|}<br />
<br />
<span style="color: red;">'''DRAGGING A GCODE RENDERING AROUND ON THE PRINT BED DOES NOTHING IN EARLIER VERSIONS!''' <br>Either positiong the stl properly before slicing, or reposition the gcode with a G54 offset - read below.</span>.<br />
<br />
The following commands define if new positioning data is defined in inches (G20) or mm (G21); or from the origin (G90) or from the present location (G91). They also stipulate the offsets from one head to another (M6), and how to invoke that offset (T).<br />
<br />
=== G10 UNUSED<sup>2</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
=== G20 Set Units to Inches ===<br />
<br />
G20 declares that henceforth, measurements will be given in inches.<br />
<br />
'''''Working with G20 is experimental and unsupported on Hyrel equipment. Use at your own risk.'''''<br />
<br />
'''Usage'''<br />
<br />
G20<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G20''' (set units to inches)<br />
<br />
<br><br />
<hr><br />
<br />
=== G21 Set Units to Millimeters ===<br />
<br />
G21 declares that henceforth, measurements will be given in mm.<br />
<br />
'''Usage'''<br />
<br />
G21<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G21<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G21''' (set units to milimeters)<br />
<br />
<br><br />
<hr><br />
<br />
=== G28 Send to Physical Home ===<br />
<br />
G28 sends the specified axes to the sensor-defined physical home position, regardless of logically set 0,0, then pop-off and re-acquire the sensor threshold at a slower rate. This pop-off and re-acquire was implemented during v3.<br />
<br />
After homing, a '''G28''' also resets current offsets to 0 - including any may have been set with a '''G92''' or an H (as defined in an '''M660''' and invoked on a '''G1'''), performs a '''G53''', and applies a head offset of 0 mm (as in an '''M6 O0''').<br />
<br />
Any axis not homed will have its position remain unchanged. We do not support intermediate positioning during homing.<br />
<br />
'''Usage'''<br />
<br />
G28 Xn Yn Zn An Bn I1<br />
<br />
'''Parameters'''<br />
<br />
'''X0''' ensures that the X axis is homed<br />
'''Y0''' ensures that the Y axis is homed<br />
'''Z0''' ensures that the Z axis is homed<br />
'''A0''' ensures that the A axis is homed<br />
'''B0''' ensures that the B axis is homed<br />
<br />
'''Example'''<br />
<br />
G28 X0 Y0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G28''' (home axis)<br />
** '''X0''' (X axis to 0)<br />
** '''Y0''' (Y axis to 0)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== G53 Clear Offsets ===<br />
<br />
G53 sets the fixture offsets to (0,0,0,0,0). This takes no arguments or variables. It does not clear stored offset values.<br />
<br />
'''Usage'''<br />
<br />
G53<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G53<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G53''' (set fixture offsets to 0; no effect on H (head) offsets)<br />
<br />
<br><br />
<hr><br />
<br />
=== G54 - G59 - Set Offsets ===<br />
<br />
G54, G55, G56, G57, G58, and G59 will each store and invoke fixture offsets in the X, Y, Z, A, and/or B axes for all subsequent moves. Any values not invoked will remain with their previous value (0 unless earlier specified otherwise). These offsets apply to all positioning until a new offset is applied, or a '''G53''' is used to clear all offsets.<br />
<br />
This graphic shows how printers (OTHER THAN THE EHR) use the G54-G59 offsets:<br />
<br />
[[File:G54.png|600px]]<br />
<br />
Note that this differs from an '''M6''', where the offsets are only applied to a SINGLE tool position. These offsets are cumulative with '''M6''' values.<br />
<br />
'''Usage'''<br />
<br />
G54 (... G59) Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the offset in mm in the X axis<br />
'''Yn''' is the offset in mm in the Y axis<br />
'''Zn''' is the offset in mm in the Z axis<br />
'''An''' is the offset in mm in the A axis<br />
'''Bn''' is the offset in mm in the B axis<br />
<br />
'''Example'''<br />
<br />
G54 X30 Y-20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G54''' (set units to milimeters)<br />
** '''X30''' (add 30mm to all X positions)<br />
** '''Y-20''' (subtract 20mm from all Y positions)<br />
** (no change to prior stored offsets)<br />
<br />
'''Example'''<br />
<br />
G55<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G55''' (apply new fixture offsets)<br />
** (no variable: use previous G55 values, or as stored under Settings > Printer > Fixture Offsets)<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G90 Absolute Positioning ===<br />
<br />
G90 stipulates that henceforth, the positioning will be calculated from the origin (0,0 point).<br />
<br />
'''Usage'''<br />
<br />
G90<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G90<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G90''' (use absolute positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G91 Relatative Positioning ===<br />
<br />
G91 stipulates that henceforth, the positioning will be calculated relative to the starting position.<br />
<br />
'''Usage'''<br />
<br />
G91<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G91<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (use relative positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G92 Reset Coordinate Offsets ===<br />
<br />
G92 resets the current position to the specified coordinates for all axes enumerated. <br />
<br />
'''Usage'''<br />
<br />
G92 Xn Yn Zn An Bn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new value for the current X position<br />
'''Yn''' is the new value for the current Y position<br />
'''Zn''' is the new value for the current Z position<br />
'''An''' is the new value for the current A position<br />
'''Bn''' is the new value for the current B position<br />
'''En''' is the new value for the current E position<br />
<br />
'''Example'''<br />
<br />
G92 X0 Y50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''X0''' (present X position is 0)<br />
** '''Y50''' (present Y position is 50)<br />
<br />
'''Example'''<br />
<br />
G92 E0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''E0''' (present E position is 0)<br />
<br />
<br><br />
<hr><br />
<br />
=== G93 Clear Coordinate Offsets ===<br />
<br />
G93 clears ALL offsets implemented via '''G92''' command.<br />
<br />
'''Usage'''<br />
<br />
G93<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G93<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G93''' (clear coordinate offset values, all axes)<br />
<br />
<br><br />
<hr><br />
<br />
=== M6 Declare Head Offsets ===<br />
<br />
M6 declares that a particular head holds a set of X, Y, and/or Z offsets, which will be invoked during a T (tool change) command. Repetrel automatically reads this data from the information stored on the heads, and sends it to the printer before the gcode file is loaded.<br />
<br />
'''Usage'''<br />
<br />
M6 T# On Xn Yn Zn An Bn Dn In Kn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the Tool position for which these offsets are being set<br />
'''On''' is the Offset position where these are being stored<br />
'''Xn''' is the offset in the X axis<br />
'''Yn''' is the offset in the Y axis<br />
'''Zn''' is the offset in the Z axis<br />
'''An''' is the offset in the A axis<br />
'''Bn''' is the offset in the B axis<br />
'''Dn''' is the current tool diameter (used with pocket commands)<br />
'''In''' non-persistent; can be default 0 (store values but do not move these distances) or 1 (store values and move these distances)<br />
'''Kn''' persistent setting; can be default 0 (use I value) or 1 (ignore I1 and always act with I0)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40<br />
<br />
This happens (for every head loaded) when you click print, and the head values are sent to the Motion Controller.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** (no move)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40 I1<br />
<br />
This happens when you execute a tool change with '''T#''', and so it triggers the move ('''I1''') to properly position the next head.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** '''I1''' (store and move distances)<br />
<br />
'''Example'''<br />
<br />
M6 K1<br />
<br />
You might include this in your header to change behavior during tool changes.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** (all future T# or M6 commands) <br />
** (no offset registers, so ignore all offsets)<br />
** '''K1''' (always force I0 with M6 unless K0 present (or has been previously set)<br />
<br />
Note that this differs from a G54-G59, where the offsets are applied to EVERY tool position.<br />
<br />
<br><br />
<hr><br />
<br />
=== M660 Assign Tool Height Offset ===<br />
<br />
Used with the High Resolution Engine (and other units which home away from O, like a CNC), an M660 declares that a particular head, when called upon, should print at the gcode-based Z position MODIFIED by this offset, since on these units, the Z-Zero is often BELOW the print surface. By default, this is ONLY used on the EHR (Engine, High Resolution)<br />
<br />
NOTE: You MUST have a '''G28 Z0''' in your header to run this M660 on the EHR.<br />
<br />
'''Usage'''<br />
<br />
M660 Hn Zn<br />
(followed by)<br />
G1 Xn Yn Zn Fn Hn (see '''[[#G1_Working_Move]]''' for other details<br />
<br />
'''Parameters'''<br />
<br />
'''H''' is the head offset register for which these offsets are being set;<br />
'''Z''' is the offset in the Z axis in mm.<br />
<br />
'''Example 1'''<br />
<br />
M660 H2 Z28.2 ; (specified before any moves)<br />
(followed by)<br />
G1 X50 Y75 F4800 H2 ; (specified on the first G1 move)<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M660''' (apply offset) <br />
** '''H2''' (store in register 2)<br />
** '''Z28.2''' (+28.2 to Z position)<br />
* (there may be more commands before the G1 move invoking the H2)<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in Z)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoke offsets stored in register H2)<br />
<br />
To be clear, this requires editing two lines of code:<br />
<br />
In your gcode, you will enter the M660 just before the first layer code. Example: <code>M660 H2 Z28.2 ; set tool height for tool two (Z offset)</code>. On the first move of layer one (usually the Z move), you will add an <code>H</code> value so that this tool height is invoked. <br />
<br />
'''Example 2'''<br />
<br />
Before editing: <br />
<br />
G1 Z0.275 F360 ; move to next layer (0)<br />
(followed by)<br />
G1 X50 Y75 F4800<br />
<br />
After editing:<br />
<br />
G1 Z0.275 F360 '''H2''' ; move to next layer (0) and invoke head Z offset for this tool</code><br />
(followed by)<br />
G1 X50 Y75 F4800 '''H2'''<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning Heads ===<br />
<br />
Clone, slave, or parallel printing, is when multiple heads make the ''exact same print'' at the same time.<br />
<br />
Usage of these commands with version 4 and earlier is explained in detail at '''https://hyrel3d.com/wiki/index.php/Cloning_and_Mixing'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== T Tool Change===<br />
<br />
T executes a tool change, invoking the parameters specified in the M6 sent from Repetrel to the printer at the job start. Do not confuse a T command with a T variable.<br />
<br />
'''See the first entry on this page for details. '''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Lasers and UV Pens''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Lasers and UV Pens<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|--<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
| colspan="3" | [[#Laser_Examples|Laser Examples]]<br />
|-<br />
| colspan="3" | [[#UV_Pen_Examples|UV Pen Examples]]<br />
|}<br />
<br />
<br />
The CO<sub>2</sub> and Diode Lasers and the UV Pens require the following enabling codes:<br />
<br />
=== M620 Enable Device ===<br />
<br />
M620 enables the device.<br />
<br />
'''Usage'''<br />
<br />
M620 T# En An<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool position<br />
'''En''' can be the default 0 (disable) or 1 (enable)<br />
'''An''' is the duration in seconds after shut-off that the cooling remains active; default is 30 (but this will not override temperature safety measures)<br />
<br />
'''Example'''<br />
<br />
M620 T# E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M620''' (enable device) <br />
** '''T#''' (target head - MUST be specified, can NOT be inherited)<br />
** '''E1''' (enable)<br />
<br />
<br><br />
<hr><br />
<br />
=== M621 Set Laser Power ===<br />
<br />
M621 sets the power for the LASER (not other heads).<br />
<br />
'''Usage'''<br />
<br />
M621 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
'''Dn''' is the initial power (similar to a prime) to penetrate material (optional; uses Pn if unspecified)<br />
<br />
Note: No tool is specified; this will happen on the laser already enabled with M620.<br />
<br />
'''Example'''<br />
<br />
M621 P40<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M621''' (activate device) <br />
** '''P40''' (at 40% during "printing" (E-value) moves)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
=== M623 Duration Emit ===<br />
<br />
M623 sets the power for the laser or UV pen, and takes the following parameters:<br />
<br />
'''Usage'''<br />
<br />
M623 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Dn''' is the duration, in miliseconds (only used for static exposures, not during moves)<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
<br />
Note: Dn max for UV pens is 60,000 (1 minute); Dn max for other devices 1,000 (1 second); <br />
<br />
Here are examples:<br />
<br />
M623 P80 D500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D500''' (duration 500 miliseconds)<br />
<br />
M623 P80 D10000 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D10000''' (duration 10 seconds)<br />
<br />
=== Emitting Move Example for the Laser ===<br />
<br />
A sample of code for lasering will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device <br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your lasering job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
=== Emitting Move Example for the UV Pen ===<br />
<br />
A sample of code for UV Curing will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device<br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your curing job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
For more complex examples, see the '''[[UV_and_Clench]]''' page.<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Spindles and Lathes''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Spindles and Lathes<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| G81 || Peck Drilling<br />
|-<br />
|}<br />
<br />
Machining and Spindle Tool commands. Note, we recommend using [http://mr-soft.net/ SimplyCAM].<br />
<br />
You can review the 5-axis gcode we used for [https://www.youtube.com/watch?v=B0lvN-aPYHI this video] from [http://hyrel3d.net/downloads/gcode/Ardes_tube_cap_milling.gcode here].<br />
<br />
=== M3 Turn On Spindle (CW) ===<br />
<br />
M3 tells the printer to activate (start) the spindle motor in the clockwise direction on the current head (if it has one), using the value set on the head for RPM. Note: S0 is the same as turning it off. Note: DO NOT CHANGE DIRECTION while the spindle is in motion.<br />
<br />
'''Usage'''<br />
<br />
M3 T# Sn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Sn''' - power (0-100%)<br />
'''Fn''' - optional; PWM in Hz (defaults on heads should be fine for most uses)<br />
<br />
'''Example'''<br />
<br />
M3 T# S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (activate spindle clockwise)<br />
** '''T#''' (target head)<br />
** '''S75''' (at 75% power) <br />
** (default PWM)<br />
<br />
<br><br />
<hr><br />
<br />
=== M4 Turn On Spindle (CCW) ===<br />
<br />
Please refer to M3, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M5 Turn Off Spindle ===<br />
<br />
M5 tells the printer to deactivate (stop) the spindle motor on the current head (if it has one). M5 has the same effect as M3 S0 or M4 S0.<br />
<br />
'''Usage'''<br />
<br />
M5 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
<br />
'''Example'''<br />
<br />
M5 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (deactivate spindle )<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M253 Turn On Lathe (CW) ===<br />
<br />
M253 tells the printer to activate (start) the lathe motor in the clockwise direction (if it has one), using the value set with M92 for RPM. Only available on Hydra 16A models.<br />
<br />
Note: S0 is the same as turning it off. <br />
<br />
'''Usage'''<br />
<br />
M253 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' - speed in units per minute (default: RPM if set with M92 as steps per revolution)<br />
<br />
'''Example'''<br />
<br />
M253 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M253''' (activate spindle clockwise)<br />
** '''S75''' (at 75 RPM) <br />
<br />
<br><br />
<hr><br />
<br />
=== M254 Turn On Lathe (CCW) ===<br />
<br />
Please refer to M253, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M255 Turn Off Lathe ===<br />
<br />
M255 tells the printer to deactivate (stop) the lathe motor (if it has one). M255 has the same effect as G253 S0 or G254 S0.<br />
<br />
'''Usage'''<br />
<br />
M255 <br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M255 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M255''' (deactivate lathe)<br />
<br />
<br><br />
<hr><br />
<br />
=== G81 Peck Drilling ===<br />
<br />
G81 tells the printer to move to a start position in X/Y and then in Z, and to make (if needed) repeated descents and retracts. This is used to make holes, especially deep holes. Note that the spindle tool is turned on with an M3 or M4 before this command, and turned off with an M5 after all work is done.<br />
<br />
'''Usage'''<br />
<br />
G81 T# Xn Yn In Pn Qn Zn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Xn''' - X position<br />
'''Yn''' - Y position<br />
'''In''' - initial Z position<br />
'''Pn''' - peck downward this many mm during each cycle<br />
'''Qn''' - retract upward this many mm after each cycle (to clear debris)<br />
'''Zn''' - maximum pecking depth<br />
'''Fn''' - Z working speed in mm/min<br />
<br />
'''Example'''<br />
<br />
G81 T# X100 Y75 I3 P3 Q-2 Z-7.5 F200<br />
<br />
''NOTE that an M660 offset must be set and applied BEFORE THIS COMMAND to allow for tool length.''<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G81''' (begin pecking cycle) <br />
** '''X100 Y75''' (move to X/Y starting position X100 Y75) <br />
** '''I3''' (move to Z starting position Z3, which will be our greatest retract height) <br />
** '''P3''' (peck downward an additional 3mm at a time)<br />
** '''Q-2''' (retract upward 2mm after each peck (to clear debris))<br />
** '''Z-7.5''' (peck to a maximum depth of 7.5mm)<br />
** '''F200''' (working (drilling) travel speed of 200 mm/min)<br />
** ''after this, the head will retract up to the I position (Z3 in this case) before moving on to the next line''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Reporting and Diagnostics''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Reporting and Diagnostics<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M670_M670_Enable_Gantry_/_Y-arm_Light|M670]] <br />
| Yes || Enable Y-arm Light<br />
|- || Activate Danger Light<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
|}<br />
<br />
The following commands help with reporting and diagnostics. Most users never need them, but here are the basics. More advanced/detailed reporting is available.<br />
<br />
=== M701 Set Head Reporting ===<br />
<br />
M701 tells heads how often to send head-specific information to the Motion Controller and on to Repetrel (and pass along to a text file if enabled via M719).<br />
<br />
'''Usage'''<br />
<br />
M701 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Pn''' - period in seconds between entries (default 1)<br />
<br />
'''Example'''<br />
<br />
M701 P12<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M701''' (head reporting) <br />
** (currently active head)<br />
** '''P12''' (every 12 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M718 Stop Logging to File ===<br />
<br />
M718 tells Repetrel to stop any logging of data to text file that may have been enabled with M719.<br />
<br />
'''Usage'''<br />
<br />
M718<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M718<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M718''' (logging off) <br />
<br />
<br><br />
<hr><br />
<br />
=== M719 Start Logging to File ===<br />
<br />
M719 tells the Motion Controller what system-wide information to report back to Repetrel, and also tells Repetrel to begin logging these details to a text file.<br />
<br />
'''Usage'''<br />
<br />
M719 Pn Sn <br />
<br />
M719 Pn Xn Yn Zn An Bn Vn En Ln<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' - period in seconds between entries<br />
'''Sn''' - can be default 0 (see options below) or 1 (report ALL data) <br />
'''Xn''' - report X position with each entry<br />
'''Yn''' - report Y position with each entry<br />
'''Zn''' - report Z position with each entry<br />
'''An''' - report A position with each entry<br />
'''Bn''' - report B position with each entry<br />
'''Vn''' - report velocity with each entry<br />
'''En''' - report flow rate with each entry<br />
'''Ln''' - report gcode line number with each entry<br />
<br />
Note: these values are persistent, and if previously enabled, will still be enabled unless disabled with a 0 parameter.<br />
<br />
'''Example 1'''<br />
<br />
M719 P10 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M719''' (logging on)<br />
** '''P10''' (every 10 seconds)<br />
** '''S1''' (report everything)<br />
<br />
'''Example 2'''<br />
<br />
M719 P.1 Xn Yn Zn Ln<br />
<br />
* '''M719''' (logging on)<br />
** '''P.1''' (every 0.1 seconds)<br />
** '''X1''' (report X position)<br />
** '''Y1''' (report Y position)<br />
** '''Z1''' (report Z position)<br />
** (don't report A position)<br />
** (don't report B position)<br />
** (don't report velocity)<br />
** (don't report flow rate)<br />
** '''L1''' (report line number)<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Enable Gantry / Y-arm Light ===<br />
<br />
M670 sets the intensity of the Y-arm LEDs.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the (percent of duty cycle, 0-100) for the LEDs<br />
'''Pn''' is the period (on-off interval - default is 1 second)<br />
<br />
'''Example 1'''<br />
<br />
M670 S50 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S50''' (50% duty cycle)<br />
** '''P1''' (1 second cycle)<br />
<br />
This would turn the Y-arm light on for 50% of 1 second, then off for 50% of 1 second - or on for 0.5 seconds, off for 0.5 seconds.<br />
<br />
'''Example 2'''<br />
<br />
M670 S25 P4<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S25''' (25% duty cycle)<br />
** '''P4''' (4 second cycle)<br />
<br />
This would turn the Y-arm light on for 25% of 4 second, then off for 75% of 4 seconds - or on for 1 second, off for 3 seconds.<br />
<br />
<br><br />
<hr><br />
<br />
=== M672 Set Gantry / Y-arm State ===<br />
<br />
M672 can be used to have the Gantry / Y-arm light change states to reflect the state of a sensor. For example, you can have it come on when the X axis is homed, or when the Y axis has a fault.<br />
<br />
'''Usage'''<br />
<br />
M672 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' can be (unlisted numbers are unused at present):<br />
'''0''' : Normal on/off<br />
'''10''' : X Home<br />
'''11''' : X Limit1<br />
'''12''' : X Limit2<br />
'''13''' : X Fault<br />
'''20''' : Y Home<br />
'''21''' : Y Limit1<br />
'''22''' : Y Limit2<br />
'''23''' : Y Fault<br />
'''30''' : Z Home<br />
'''31''' : Z Limit1<br />
'''32''' : Z Limit2<br />
'''33''' : Z Fault<br />
'''40''' : A Home<br />
'''41''' : A Limit1<br />
'''42''' : A Limit2<br />
'''43''' : A Fault<br />
'''50''' : B Home<br />
'''11''' : B Limit1<br />
'''52''' : B Limit2<br />
'''53''' : B Fault<br />
'''60''' : C Home<br />
'''61''' : C Limit1<br />
'''62''' : C Limit2<br />
'''63''' : C Fault<br />
<br />
'''Example'''<br />
<br />
M672 S<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M672''' (map Y-arm light to state of sensor)<br />
<br />
<br><br />
<hr><br />
<br />
=== M772 Reset All Metrics ===<br />
<br />
M772 will reset all internal gathering registers to '''0'''.<br />
<br />
'''Usage'''<br />
<br />
M772 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' 0 is default; S can be...<br />
'''0''' reset all values only<br />
'''1''' also generates a basic printing report<br />
'''255''' also generates all possible reports (helpful for advanced debugging)<br />
<br />
'''Example'''<br />
<br />
M772 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M772''' (reset all metrics)<br />
** '''S1''' (and generate basic printing report<br />
<br />
<br><br />
<hr><br />
<br />
=== M773 Generate Basic Report ===<br />
<br />
M773 generates a basic report of printing statistics (including average speed, number of primes, etc.)<br />
<br />
Note: this report will be more meaningful if you use '''M772''' to reset these counters at the start of a job.<br />
<br />
'''Usage'''<br />
<br />
M773<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M773<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M773''' (generate basic report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M773 - print job metrics Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Time (s) Dist (m)<br />
>IN: 50: -------- --------<br />
>IN: 50: Totals: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Printing moves: 0.0 0.000<br />
>IN: 50: Non-printing moves 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Accelerating: 0.0 0.000<br />
>IN: 50: Cruising: 0.0 0.000<br />
>IN: 50: Decelerating: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: can e steps issued: 0<br />
>IN: 50: approx filament (PI*d) 0.000 m<br />
>IN: 50: approx filament (PIr^2) 0.000 m<br />
>IN: 50: unprimes issued: 0<br />
>IN: 50: primes issued: 0<br />
>IN: 50: unprime-primes avoided: 0<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M773 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Aux Devices''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Aux Devices<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
|}<br />
<br />
<br />
Individual port control commands.<br />
<br />
=== M7 Activate Aux 1 ===<br />
<br />
[[File:M7m8m9_ehr.jpg|thumb|12VDC Ports on EHR|right]]<br />
<br />
[[File:M7m8m9_30m_esr.jpg|thumb|12VDC Ports on 30M, ESR|right]]<br />
<br />
M7 sends 12VDC to the port associated with "Mist Coolant", which we sometimes call Aux1. With no parameters, it is read as M7 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M7 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 1 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 1 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M7 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M7 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M7 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S0''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M7 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M8 Activate Aux 2 ===<br />
<br />
M7 sends 12VDC to the port associated with "Flood Coolant", which we sometimes call Aux2. With no parameters, it is read as M8 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M8 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 2 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 2 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M8 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M8 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M8 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M8 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M9 Deactivate Aux1 & Aux2 ===<br />
<br />
M9 cuts power to both Aux1 and Aux2. It is equivalent to running M7 S0 and M8 S0.<br />
<br />
'''Usage'''<br />
<br />
M9<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M9<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M9''' (set Aux 1 and Aux 2 to value 0 (off)) <br />
<br />
<br><br />
<hr><br />
<br />
=== M620 Activate Emitter ===<br />
<br />
See [[#M620_Enable_Device]] above.<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Activate Y-Arm (Gantry) Lights ===<br />
<br />
M670 sends 12VDC to the port associated turning on the Gantry (16A) or Y-arm (30M, ESR) lights.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M670 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M670 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M670 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M671 Activate X-Arm (Danger) Lights ===<br />
<br />
M671 sends 12VDC to the port associated turning on the X-arm / Danger lights (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M671 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M671 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M671 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M675 Activate Response LEDs ===<br />
<br />
M675 sends 12VDC to the port associated turning on the Response LEDs (30M/16A only).<br />
<br />
'''Usage'''<br />
<br />
M675 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M675 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M675 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M675 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M676 Activate Recirc. Fan ===<br />
<br />
M676 sends 12VDC to the port associated turning on the Recirc. Fan (16A only).<br />
<br />
'''Usage'''<br />
<br />
M676 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M676 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M676 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M676 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M677 Activate Buzzer ===<br />
<br />
M677 sends 12VDC to the port associated turning on the Buzzer (older 30Ms only).<br />
<br />
'''Usage'''<br />
<br />
M677 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M677 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M677 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M677 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M678 Activate Laser X-hair ===<br />
<br />
M678 sends 12VDC to the port associated turning on the Laser X-hair (16A with CO<sub>2</sub> lasers only).<br />
<br />
'''Usage'''<br />
<br />
M678 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M678 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M678 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M678 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
<br><br />
<hr><br />
<br />
=== M679 Activate Vacuum ===<br />
<br />
M679 sends 12VDC to the port associated turning on the Vacuum (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M679 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M679 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M679 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M684 Activate Exhaust ===<br />
<br />
M671 sends 12VDC to the port associated turning on the Exhaust (16A only).<br />
<br />
'''Usage'''<br />
<br />
M684 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M684 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M684 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M684 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M685 Set Power on Air ===<br />
<br />
M685 sends 12VDC to the port associated turning on the (positive pressure) Air (16A only).<br />
<br />
'''Usage'''<br />
<br />
M685 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M685 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M685 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' Air value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M685 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M689 Activate Ext. Head ===<br />
<br />
M689 sends 12VDC to the port associated turning on the Ext. Head.<br />
<br />
'''Usage'''<br />
<br />
M689 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M689 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M689 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M689 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M783 Tie Aux to Extrusion ===<br />
<br />
M783 can tie some auxiliary port (like Aux 1, normally controlled by M7, or Aux 2, normally controlled by M8, etc.) to be powered (at 100%) during a certain head's extrusion. Some users use this so that they can print with Ultimus or Viscotec heads on our equipment. See also [[#M7_Set_Power_On_Aux_1|M7]] and [[#M8_Set_Power_On_Aux_2|M8]].<br />
<br />
Note: M619 can be used to map which port M783 ties to - contact us for more information.<br />
<br />
'''Usage'''<br />
<br />
M783 T# <br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool to which the designated aux port will be tied<br />
<br />
'''Example'''<br />
<br />
M783 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M783''' (Tie current Aux port to status of head)<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Other Commands''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Other Commands<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
Other commands.<br />
<br />
=== M17 Engage Motors ===<br />
<br />
M17 will apply power to all motors (positioning and extruder motors), locking them at their current postion; this prevents the bed and yoke from being pushed manually in the X and Y. <br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M17''' (engage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M18 Disengage Motors ===<br />
<br />
M18 will cut power to all motors (positioning and extruder motors), unlocking them; this allows the motors to cool down (as they normally lock in place while still), as well as allowing one to manually push the bed and yoke in the X and Y. It also notifies the GUI that motors are disabled. All axes with homes must be rehomed after an M18.<br />
<br />
Note this is identical to '''M84''' and the opposite of '''M17'''.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M18''' (disengage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M30 End of Program ===<br />
<br />
M30 tells the printer that this job is complete. No gocde after an M30 will be executed as part of the previous job.<br />
<br />
Note M30 also dissolves any cloning setups, changes head index to 0, clears fixture offsets (G53), clears any M229 E-value settings, resets M106 persistent range, resets any printing errors, resets M660 head offsets to 0, resets heads to their stored values, and triggers any queued reports.<br />
<br />
'''Usage'''<br />
<br />
M30<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M30<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M30''' (end or program) <br />
<br />
<br><br />
<hr><br />
<br />
=== M84 Disable Motors ===<br />
<br />
M84 invokes an M18. Please see M18 for usage.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
<br><br />
<hr><br />
<br />
=== M790 New Layer Actions ===<br />
<br />
M790 will trigger any associated new layer actions, which can include capturing an image from the designated camera. It takes no parameters.<br />
<br />
=== M791 Snap Image ===<br />
<br />
M791 will cause the camera selected under the Interface > Camera1 tab, if set to live video, to capture an image and save it to <code>C:\Users\hyrel\Pictures\HyrelPrinterPictures\Camera1</code>, named <code>pic#.png</code><br />
<br />
=== M792 Execute Action ===<br />
<br />
M792 causes Repetrel to perform an action, such as displaying an image or making a warning beep.<br />
<br />
'''Usage'''<br />
<br />
M792 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M792 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M792''' (execute action) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== Gcode Header ==<br />
<br />
Here are some sample headers for Gcode on our equipment:<br />
<br />
=== 16A, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
M190 S100 ; bed preheat : set and wait<br />
M140 S[bed_temperature] ; bed temp : set, no wait<br />
M104 T12 S[temperature] ; head temp : set, no wait<br />
<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M190 S[bed_temperature] ; bed temp : set and wait<br />
M109 T12 S[temperature] ; head temp : set and wait<br />
<br />
T1 ; use SECOND tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 ///////////////</code><br />
<br />
=== 30M and ESR, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
G28 Z0 ; home, goto : Z (ignored if no Z home)<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
;M190 S[bed_temperature] ; bed temp : set and wait <= COMMENTED OUT<br />
;M109 T11 S[temperature] ; head temp : set and wait <= COMMENTED OUT<br />
<br />
T0 ; use FIRST tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 ///////////////<br />
<br />
== Gcode Footer ==<br />
<br />
=== Standard, All Models ===<br />
<br />
Below is our standard Gcode footer, which should be at the end of all your gcode files:<br />
<br />
; /////////////// BEGIN HYREL STANDARD FOOTER - 2021.02.12 \\\\\\\\\\\\\\\<br />
<br />
; temp control:<br />
<br />
<br />
M107 T100 ; fans, diodes : off<br />
M620 T100 E0 ; CO2 lasers ; off<br />
M104 T100 S0 ; head temps : off<br />
M140 T90 S0 ; bed temps : off<br />
M5 ; spindles : off<br />
<br />
; housekeeping<br />
<br />
G91 ; coordinates : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
G0 Y0 ; home, goto : Y axis<br />
G0 X0 ; home, goto : X axis<br />
M84 ; motors : disable<br />
G53 ; clear offsets<br />
M30 ; program : end<br />
<br />
; \\\\\\\\\\\\\\\ END HYREL STANDARD FOOTER - 2021.02.12 ///////////////</div>Davohttps://hyrel3d.com/wiki/index.php?title=Gcode&diff=7764Gcode2024-03-06T14:27:14Z<p>Davo: /* M721 Set Unprime Values */</p>
<hr />
<div><br />
<br />
__NOTOC__<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! Main Sections<br />
|-<br />
| [[#What_is_GCode.3F | What is GCode?]]<br />
|-<br />
| [[#Understanding_the_T | Understanding the T]]<br />
|-<br />
| [[#Most_Commonly_Edited_Gcodes | Most Commonly Edited GCodes]]<br />
|-<br />
| [[#Controlling_Movement | Controlling Movement]]<br />
|-<br />
| [[#Controlling_Temperature | Controlling Temperature]]<br />
|-<br />
| [[#Controlling_Material_Flow | Controlling Material Flow]]<br />
|-<br />
| [[#Controlling_Position_and_Offsets | Controlling Position and Offsets]]<br />
|-<br />
| [[#Controlling_Lasers_and_UV_Pens | Controlling Lasers and UV Pens]]<br />
|-<br />
| [[#Controlling_Spindles_and_Lathes | Controlling Spindles and Lathes]]<br />
|-<br />
| [[#Reporting_and_Diagnostics | Reporting and Diagnostics]]<br />
|-<br />
| [[#Controlling_Aux_Devices | Controlling Aux Devices]]<br />
|-<br />
| [[#Other_Commands| Other Commands]]<br />
|-<br />
| [[#Gcode_Header| Gcode Headers]]<br />
|-<br />
| [[#Gcode_Footer| Gcode Footer]]<br />
|-<br />
|}<br />
<br />
Note: Codes in Black are supported on version 4 and above (v4+), and most likely on version 3 as well.<br />
<br />
<span style="color:darkorange;">Note: Codes in Orange are supported on version 5 and above (v5+) only.<br />
<br />
Note that Repetrel versions prior to 4.2 can not properly process gcode with "tab" characters - tab was a reserved character.<br />
<br />
== What is GCode? ==<br />
<br />
'''Everything your Hyrel 3D Printer does is done by executing GCode''', whether you are aware of it or not. <br />
<br />
Every button you press on the screen sends a gcode to the printer.<br />
<br />
When you start a job (by pressing "Print"), the settings from your head are sent to the printer (including flow and prime/unprime values); then the gcode file is sent, line by line, to the printer.<br />
<br />
All parameters are persistent, so once they are set, they will remain in place unless or until you (or the file) sends a new, updated value (including setting to 0).<br />
<br />
Please note that there are many flavors of gcode, and while most have the same (or very similar) G0-G100 and M0-M100, codes above 100 are largely nonstandard.<br />
<br />
''It is important to remember that different variable letters can have different meanings, depending on the G- or M- code being used'' - '''''especially the T value.'''''<br />
<br />
The Table of Contents to the right lists the main categories of Gcodes.<br />
<br />
Below is a table listing them in numerical order (click '''Expand''' to expand):<br />
<br />
{| border="1" class="wikitable mw-collapsible mw-collapsed"<br />
|+ Code_Chart<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_X,_Y_to_Physical_Home|G28]] <br />
| Yes || Send X, Y to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| Yes || Peck Drilling<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#M619_Map_Aux_Port|M619]] <br />
| Yes || Map Aux Port<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Set Unprime Values<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Set Prime Values<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
=== '''Header Explained''' ===<br />
<br />
Please visit [[GCode Header]] for a detailed description of our standard GCode headers.<br />
<br />
== '''Understanding the T''' ==<br />
<br />
A '''T Command''' changes which head has the focus of the motion controller and is executing the gcode. Each of our printers have at least four tool positions.<br />
<br />
The use of T commands and variables changes greatly (for the better) with the jump to version 5 from the previous versions.<br />
<br />
Please see '''[[T_v4]]''' for CURRENT (v4 and earlier) use, where the nomenclature for '''T Commands''' and the '''T Variables''' are not the same.<br />
<br />
We will use a '''T#''' in the descriptions below to avoid confusion; please find the correct designation for your version by following the links above.<br />
<br />
== '''Most Commonly Edited Gcodes''' ==<br />
<br />
Below are the gcodes users should first become familiar with. <br />
<br />
=== Tool Changes ===<br />
<br />
'''T0''' tells the printer to perform extrusion (or emission) from the tool in the far left position<br><br />
'''T1''' tells the printer to perform extrusion (or emission) from the tool in the second-from-left position<br><br />
'''T2''' tells the printer to perform extrusion (or emission) from the tool in the third-from-left position<br><br />
'''T3''' tells the printer to perform extrusion (or emission) from the tool in the fourth-from-left position<br><br />
'''T4''' tells the printer to perform extrusion (or emission) from the tool in the fifth-from-left position (if available)<br />
<br />
=== Movement ===<br />
<br />
'''G0''' for "rapid", non-printing moves<br><br />
'''G1''' for "working speed" moves, which may be printing (with E value) or non-printing (no E value)<br />
<br />
=== Temperature ===<br />
<br />
'''M104''' to set head temp<br><br />
'''M109''' to set and wait for head temp<br><br />
'''M140''' to set bed temp<br><br />
'''M190''' to set and wait for bed temp<br />
<br />
=== Others ===<br />
<br />
Which commands to learn from here will depend on what the user intends to do with the equipment.<br />
<br />
== '''Controlling Movement''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Movement<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
|}<br />
<br />
=== G0 Rapid Move ===<br />
<br />
G0 is a rapid positioning move. It is not a ''working'' move, meaning that your equipment will not be printing, milling, lasering, or doing any other active work during a G0 move. G0 is intended to move your tool to a new position, where the work will happen. Accordingly, G0 movement speeds are set in your configuration settings, rather than being specified in your gcode file. <br />
<br />
Special note: a G0 command will take an F variable as a nonpersistent, one-time velocity setting. <br />
<br />
'''Usage'''<br />
G0 Xn Yn Zn An Bn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G0 X50 Y75 Z10<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G0''' (rapid (nonprinting) straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** '''Z10''' (10mm in the Z) <br />
** (no change in A)<br />
** (no change in B)<br />
** (no change in F, use settings-specified feed rate)<br />
<br><br />
<hr><br />
<br />
=== G1 Working Move ===<br />
<br />
G1 is a working move, during which you may be printing, milling, lasering, or doing other active work - provided an E (extrude) value is given. In native mode (if you don't add '''M229 E1 Dn''', the value of Extrusion rate E will be ignored, but E will trigger a working or printing move. In E-value mode (by adding '''M229 E1 Dn''', the slicer-determined E value will be used to control material flow. G1 moves are made at the rate indicated by the F (feed rate) value; if no F value is specified, the last F value set will be used. See '''[[#M229_Use_E_Values|M229]]''' for more details.<br />
<br />
'''Usage'''<br />
G1 Xn Yn Zn An Bn Fn Sn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''En''' is the cumulative E axis (extrusion) position to move (or advance) to<br />
'''Hn''' is the stored head offset to apply (see '''M660''' to store offsets)<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
'''Sn''' is a one-time (non-persistent) material flow rate multiplier (rarely used) applied to this move only<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases; there will be problems with an entire model sliced in relative mode. Relative is intended for special operations like drilling holes.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G1 X50 Y75 E1 F1800 H2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in A)<br />
** (no change in B)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoking offsets stored in register H2)<br />
** (no temporary scaling)<br />
<br />
<br><br />
<hr><br />
<br />
=== G2 Clockwise Arc ===<br />
<br />
A G2 move specifies a clockwise arc (or complete circle) from the current position to position (X,Y,Z)<sub>curr</sub> by following an arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J). <br />
<br />
'''Usage'''<br />
<br />
G2 Xn Yn Zn In Jn Fn En Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 F1800<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 S6<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** (using previously established F rate)<br />
** '''S6''' (made up of six sides - resulting in a hexagon with one point at the origin, with all corners inscribed on the circle)<br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G2-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G2-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G2-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G2-4.png]]<br><br />
Note, if no endpoints are defined, G2 will make a 360° circle by default.<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool1.png]]<br />
<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.1 Spiral CW Arc<sup>1</sup> ===<br />
<br />
A G2.1 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Effective ending X/Y is always the same as the current XY and is not specified (though the actual final position is a function of the number of laps, the pitch, and the reverse code. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). An important feature is the "reverse code" to allow the creation of frog toes without having to jump over the frog toe once it's made. <br />
<br />
'''Usage'''<br />
<br />
G2.1 Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Note: '''In''' and '''Jn''' both default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Pn''' is the pitch (how close the laps are) in mm (required)<br />
'''Ln''' is the number of laps to complete (must be a positive integer; you don't need to finish the spiral)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Rn''' is a flag; 0 to spiral in (default), 1 to spiral out (after inward jump), 2 spiral out from current position<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.1 I15 J20 P1.2 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** (complete all laps)<br />
** '''P1.2''' (1.2 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (use default R of 0, spiral in toward center from current location)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.1 Z10 I15 J20 P0.5 L50 E1 S9 R1 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''L50''' (complete no more than 50 laps)<br />
** '''P0.5''' (0.5 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''R1''' (spiral out from center to current location)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.1 I25 J0 P4 L3 E1 ; spiral in 3 laps, 4mm pitch <br />
G1 X14 E1 ; add connector for the arcs<br />
G2.1 I11 J0 P4 L3 E1 R2 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool2.1.png]]<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.2 Spiral CW Arc<sup>2</sup> ===<br />
<br />
A G2.2 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Unlike G2.1, G2.2 specifies final X/Y (and Z) location. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). Unlike G2.1, G2.2 does not require a reverse code as the direction of spiral is determined by the positional relationship of the current position, final position, and center position.<br />
<br />
'''Usage'''<br />
<br />
G2.2 Xn Yn Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Starting with Motion Controller firmware 4.203a:''<br />
''If I and J are both zero (center = start), path will spiral outward CCW from current to final position.''<br />
''If I and J match the end (center = end), path will spiral inward CW from current to final position."<br />
'''Pn''' is the pitch (how close the laps are) in mm (optional)<br />
'''Ln''' is the number of laps (or paths) to complete (you don't need to finish the spiral)<br />
''Note, if P and L values conflict, L will be modified to match what P will allow; at least one must be specified<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.2 I15 J20 P1 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (1mm between centers of travel of adjacent laps)<br />
** (complete all laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.2 Z10 I15 J20 P2 L50 E1 S9 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (2mm between centers of travel of adjacent laps)<br />
** '''L50''' (complete no more than 50 laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.2 X12 I25 P4 E1 ; spiral in 3 laps, 4mm pitch<br />
G1 X14 E1 ; add connector to next spiral<br />
G2.2 X2 I11 P4 E1 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode also generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.3 3-Space CW Arc ===<br />
<br />
A G2.3 move specifies a clockwise arc (or complete circle(s) from the current position to position (X,Y,Z)<sub>curr</sub> following a circular arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J, Z<sub>curr</sub>+K). Unlike G2, G2.1 and G2.2, G2.3 is not bound to the X/Y plane. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). <br />
'''Usage'''<br />
<br />
G2.3 Xn Yn Zn An Bn In Jn Kn Un Vn Wn Dn Pn En Sn Fn<br />
<br />
Note: If we are in G16 mode, Un, Vn, Wn define the vector normal to the work plane. If we are in G17 (X/Y plane) or G18 (X/Z plane) or G19 (Y/Z plane) mode, these are ignored.<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to end at<br />
'''Yn''' is the new Y position to end at<br />
'''Zn''' is the new Z position to end at<br />
'''An''' is the new A position to end at (4th axis)<br />
'''Bn''' is the new B position to end at (5th axis)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Kn''' is the '''''relative''''' distance from the current Z position to the center position about which to arc (default 0)<br />
''Note: '''In''', '''Jn''', and '''Kn''' all default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Un''' is the X component of a vector normal to the working plane (default 0)<br />
'''Vn''' is the Y component of a vector normal to the working plane (default 0) <br />
'''Wn''' is the Z component of a vector normal to the working plane (default 0)<br />
'''Dn''' is the overall displacement normal to the working plane for this element<br />
'''Pn''' is the pitch (how close the laps are normal to the working plane) in mm (default 0; one path, no incremental displacement)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3 Counterclockwise Arc ===<br />
<br />
Please refer to G2, above, for details. All options are identical, with the exception of direction (CCW). <br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G3-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G3-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G3-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G3-4.png]]<br><br />
Note, if no endpoints are defined, G3 will make a 360° circle by default.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.1 Spiral CCW Arc<sup>1</sup> ===<br />
<br />
Please refer to G2.1, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.2 Spiral CCW Arc<sup>2</sup> ===<br />
<br />
Please refer to G2.2, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.3 3-Space CCW Arc ===<br />
<br />
Please refer to G2.3, above, for details. All options are identical, with the exception of direction (CCW).<br />
<br />
<br><br />
<hr><br />
<br />
=== G4 Timed Pause ===<br />
<br />
G4 is a pause for a set number of seconds (S) or milliseconds (P). <br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
'''Usage'''<br />
<br />
G4 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the number of Seconds to pause<br />
'''Pn''' is the number of Milliseconds to pause<br />
<br />
You may use '''S''' or '''P''', or if you use both, the total value will be the pause duration.<br />
<br />
'''Example'''<br />
<br />
G4 S0.5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''S0.5''' (0.5 seconds)<br />
<br />
'''Example'''<br />
<br />
G4 P500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''P500''' (500 milliseconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== G16 Arc Plane: Any ===<br />
<br />
G16 permits free-form designation of points in space, without limiting them to an axial plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G16<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G16<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G16''' (allow element in any orientation) <br />
<br />
<br><br />
<hr><br />
<br />
=== G17 Arc Plane: XY ===<br />
<br />
G17 restricts this element to the X/Y plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G17''' (restrict element to X/Y plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G18 Arc Plane: XZ ===<br />
<br />
G18 restricts this element to the X/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G18''' (restrict element to X/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G19 Arc Plane: YZ ===<br />
<br />
G19 restricts this element to the Y/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G19<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G19<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G19''' (restrict element to Y/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== M0 Stop Until Resume ===<br />
<br />
M0 is a stop until resume command; text listed after a semicolon will be displayed, and clicking the '''Play''' button (which replaces the '''Pause''' button) will cause the job to resume. Note that all lines will be truncated at 100 characters.<br />
<br />
* ''';''' All text following the ''';''' will be echoed to the print mask (Control Tab).<br />
<br />
Additionally, an M0 command can also take the following parameters, and so will pause and then:<br />
<br />
'''Usage'''<br />
<br />
M0 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume)<br />
<br />
'''Example'''<br />
<br />
M0 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
=== M203 Set G0 Speed ===<br />
<br />
M203 will redesignate the rate at which [[#G0 Rapid Move|G0]] movements are executed. If undeclared, the values stored in Repetrel for your equipment will be used. These can be changed under '''Settings > Printer''', on the '''Printer''' tab. The values set on your unit are set based on testing; exceed them at your own risk.<br />
<br />
'''Usage'''<br />
<br />
M203 Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new speed in the X axis for G0 moves<br />
'''Yn''' is the new speed in the Y axis for G0 moves<br />
'''Zn''' is the new speed in the Z axis for G0 moves<br />
'''An''' is the new speed in the A axis for G0 moves<br />
'''Bn''' is the new speed in the B axis for G0 moves<br />
<br />
'''Example'''<br />
<br />
M203 Y2000<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M203''' (Set G0 Speed) <br />
** (X remains unchanged)<br />
** '''Y2000''' (Y axis: 2000mm/min)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== M674 Use Turbo Mode ===<br />
<br />
M674 will enable Turbo Mode, where certain non-printing (no E value) working (G1, G2, or G3) moves will be treated as G0 moves (executed at "rapid move speed" rather than "working move speed"). Killing a job will clear the M674 setting.<br />
<br />
'''Usage'''<br />
<br />
M674 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the minimum distance threshold for Turbo Mode to activate, and is required; no S value returns an error.<br />
<br />
'''Example 1'''<br />
<br />
M674 S2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S2''' (for moves of 2 mm or greater) <br />
<br />
'''Example 2'''<br />
<br />
M674 S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S50''' (for moves of 50 mm or greater)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Temperature''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Temperature<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
|}<br />
<br />
What's Hotbed 2 and Chamber 2? Well, our Hydra models have room to have a second hotbed, which could be a smaller, higher temperature hotbed, or a sub-ambient chilled bed, or even a High Resolution hotbed. And we've talked about having a smaller chamber inside the primary chamber, to bring the air around the print (but not the head) to much higher temperatures; call for details.<br />
<br />
<br><br />
<hr><br />
<br />
=== M104 Set Temp (Head) ===<br />
<br />
M104 sets the extruder temperature but does not pause the printer. <br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M104 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the tool assignment for this temperature command<br />
<br />
'''Example'''<br />
<br />
M104 T# S75 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M104''' (Set Temperature) <br />
** '''T#''' (target head)<br />
** '''S75''' (to 75°C)<br />
<br />
<br><br />
<hr><br />
<br />
=== M106 Set Cooling / Etc. ===<br />
<br />
M106 sets the cooling fan (or crosslinking LEDs) speed (or intensity). This also turns on the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M106 Cn<br />
<br />
or<br />
<br />
M106 T# Sn<br />
<br />
or <br />
<br />
M106 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head<br />
'''Sn''' is the percent of duty cycle for the cooling fan (or LEDs); default: 100<br />
'''Cn''' is the range (0-100 or 0-255) that we will use; if unspecified, the default is C100 (use C255 to be compatible with most slicers)<br />
'''Pn''' is the percent of duty cycle for the cooling fan (or LEDs) ''to come on only during extrusion moves''<br />
<br />
'''Example'''<br />
<br />
M106 C255<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** (on all tools)<br />
** (no speed)<br />
** '''C255''' (of range 0-255)<br />
<br />
Note, with this command, all following M106 commands for the rest of this print job will be based on this range (unless specified with a new C value).<br />
<br />
'''Example'''<br />
<br />
M106 T# S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''S50''' (target value of 50)<br />
** (previously defined (or default 0-100) range)<br />
<br />
'''Example'''<br />
<br />
M106 T# P100 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''P100''' (during extrusion moves at 100% duty cycle<br />
<br />
<span style="color: blue;">''But Davo, I want to cure a certain spot for 10 seconds with every layer change; how do I do this?''</span><br />
<br />
Easy. Edit your slicer recipe to add the following code after layer changes (edit as needed for duration, intensity, or position):<br />
<br />
;---- BEGIN COD CODE<br />
G91 ; relative moves<br />
G0 Z5 ; drop bed<br />
G90 ; absolute moves<br />
G0 X130 Y110 ; move into position<br />
M106 S100 T# ; turn on T# UV at 100%<br />
G1 X140 Y110 F100 ; move 10 mm in the X at 100 mm/min<br />
G1 X140 Y120 F100 ; move 10 mm in the Y at 100 mm/min<br />
G1 X130 Y120 F100 ; move -10 mm in the X at 100 mm/min<br />
G1 X130 Y110 F100 ; move -10 mm in the Y at 100 mm/min<br />
M106 S0 T# ; turn off T# UV (set it to 0%)<br />
;--- END COD GCODE<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (Use relative moves)<br />
* '''G0''' (Non-working move)<br />
** '''Z5''' (+5 mm in the Z)<br />
* '''G90''' (Use absolute moves)<br />
* '''G0''' (Non-working move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S100''' (100% duty)<br />
** '''T#''' (On target head)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S0''' (0% duty)<br />
** '''T#''' (On target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M107 Stop Cooling / Etc. ===<br />
<br />
M107 turns off the cooling fan (or crosslinking LEDs); this is essentially the same as an M106 S0 (setting it to 0 percent). This will also turn off the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M107 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (target head)<br />
<br />
'''Example'''<br />
<br />
M107 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M107''' (Set Cooling/LEDs to 0%) <br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M109 Wait for Temp (Head) ===<br />
<br />
M109 waits for the extruder to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) heads as options.<br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M109 T# Sn Hn Cn Ln Un Rn <span style="color:darkorange;">W0<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M109 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head - (required)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<span style="color:darkorange;">'''W0''' if present, will set the temp and advance to the next line without pause, but upon executing M116, will pause until temp is reached<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M109 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M109 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M109 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M109 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M109 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M109 R10<br />
<br />
* '''M109''' (wait for temp)<br />
** (no T# - use head with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<span style="color:darkorange;">'''Example 7'''<br />
<br />
<span style="color:darkorange;">M109 T# S240 W0<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M109''' (wait for temp) <br />
** <span style="color:darkorange;">'''T#''' (target head)<br />
** <span style="color:darkorange;">'''S240''' (and set temp to 240°C)<br />
** <span style="color:darkorange;">'''W0''' (but do not pause until M116 is executed)<br />
<br />
<br><br />
<hr><br />
<br />
=== <span style="color:darkorange;">M116 Wait for Temps (v5+)</span> ===<br />
<br />
<span style="color:darkorange;">M116 is supported with version 5.x and later (v5+) of Repetrel Software and Motion Controller Firmware.<br />
<br />
<span style="color:darkorange;">'''Usage'''<br />
<br />
<span style="color:darkorange;">M116 <br />
<br />
<span style="color:darkorange;">'''Parameters'''<br />
<br />
<span style="color:darkorange;">'none'<br />
<br />
<span style="color:darkorange;">'''Example'''<br />
<br />
<span style="color:darkorange;">M116<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M116''' (wait for any set temps (M109, M190, M191) with '''W0''' values before proceding<br />
<br />
<br><br />
<hr><br />
<br />
=== M140 Set Temp (Bed) ===<br />
<br />
M140 sets the bed temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M140 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target bed (default is the primary bed)<br />
<br />
'''Example'''<br />
<br />
M140 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M140''' (set bed temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary bed)<br />
<br />
<br><br />
<hr><br />
<br />
=== M141 Set Temp (Chamber) ===<br />
<br />
M141 sets the chamber temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M141 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target chamber (default is the primary chamber)<br />
<br />
'''Example'''<br />
<br />
M141 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M141''' (set chamber temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary chamber)<br />
<br />
<br><br />
<hr><br />
<br />
=== M190 Wait for Temp (Bed) ===<br />
<br />
M190 waits for the bed to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) beds as options.<br />
<br />
'''Usage'''<br />
<br />
M190 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M190 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (optional) is the target bed (default is the primary (or only) bed)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M190 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M190 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M190 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M190 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M190 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M190 R10<br />
<br />
* '''M190''' (wait for temp)<br />
** (no T# - use bed with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
=== M191 Wait for Temp (Chamber) ===<br />
M191 waits for the chamber to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) chambers as options.<br />
<br />
'''Usage'''<br />
<br />
M191 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M191 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target chamber (default is the primary (or only) chamber)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M191 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M191 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M191 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M191 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M191 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M191 R10<br />
<br />
* '''M191''' (wait for temp)<br />
** (no T# - use chamber with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Material Flow''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Material Flow<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Unprime or Retract<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Prime or Advance<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
|}<br />
<br />
You can specify flow rate variables in your gcode; we do not do this by default, but take these values from the head itself. Any values you stipulate in your gcode will supersede the values stored on the head. With our recipes the slicing program generates gcode which dictates temperature and movement commands and indicates which moves should dispense material (a G1 move with an E value). <br />
<br />
However, we have two different ways to control flow. <br />
<br />
* If you use '''M229 E1 D1''' we will use the E values generated by the slicer ''for printing moves, but we will always use the prime/unprime settings on the head for advancing and retracting when transitioning between printing and non-printing moves.'' This allows for varying extrusion widths and layer thicknesses (on the same layer - as with support material). This is how just about all slicers and printers work.<br />
<br />
* If you do not use that command, we do not use that E value (except to distinguish printing from non-printing moves) we calculate for flow based purely on travel speed, declared layer thickness, and nozzle diameter. This is explained at http://hyrel3d.net/wiki/index.php/Flow_Rate<br />
<br />
When a head is loaded, it sends this flow data (how to calculate flow, as well as how much to prime and unprime (advance and retract) material when transitioning between printing and non-printing moves - and even how many primes or unprimes to do in conjunction with a tool change.<br />
<br />
In this way, the very same gcode (with temperature changes) can be used with any material, provided you are using the same physical parameters that the model was sliced for.<br />
<br />
<br><br />
<hr><br />
<br />
=== G10 UNUSED<sup>1</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== G11 UNUSED ===<br />
<br />
G11 is not recognized by Repetrel. <br />
<br />
On some other printers, this will do an advance or unretract; we do this via '''M722'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== M82 Absolute E-Values ===<br />
<br />
M82 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the original (0) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M82<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M82<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M82''' (use absolute E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M83 Relative E-Values ===<br />
<br />
M83 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the relative (last used) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M83<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M83<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M83''' (use relative E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M221 Set Flow Rate ===<br />
<br />
M221 sends information to the printer about material flow.<br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
Note, our default mode is volumetric calculations; if you need to slice with linear calculations, multiply your Pn by approximately 2.4 (you can do the math).<br />
<br />
'''Usage'''<br />
<br />
M221 Pn Sn Wn Zn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the number of pulses on the motor to dispense 1 μl of material;<br />
'''Sn''' is the direct flow multiplier (to allow for undersized or oversized stock;<br />
'''Wn''' is the width of the cross section of the volume to fill;<br />
'''Zn''' is the height (layer thickness) of the cross section of the volume to fill; and<br />
'''T#''' is the tool (head) to which these values will be applied.<br />
As always, any parameters not specified will be inherited from your environment.<br />
<br />
'''Example'''<br />
<br />
M221 S1.0 T# P77 W0.5 Z0.3<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M221''' (set flow rate) <br />
** '''S1.0''' (flow multiplier of 1.0) <br />
** '''T#''' (target head) <br />
** '''P77''' (77 pulses per microliter) <br />
** '''W0.5''' (0.5mm nozzle) <br />
** '''Z0.3''' (0.3mm layer thickness - note that your gcode '''M756''' will overwrite this value)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
<br><br />
<hr><br />
<br />
=== M229 Use E Values ===<br />
<br />
'''Starting with version 4''', Hyrel will begin to enable the use of E-values in your gcode. Variable extrusion width and support/infill thickness slicers, rejoice! Note, calculations are done for every single move individually.<br />
<br />
'''Usage'''<br />
<br />
M229 En Dn Sn<br />
<br />
'''Parameters'''<br />
<br />
'''En''' can be 0 (native flow calculation) or 1 (use E values)<br />
'''Dn''' how directed to head; see below<br />
'''D0''' on head controller directly; constant flow, not adjusted for motion acceleration/deceleration<br />
'''D1''' on motion controller, sent to head via CANBUS and adjusted for motion acceleration/deceleration<br />
'''D2''' on motion controller, sent to head via C axis step pin and adjusted for motion acceleration/deceleration<br />
'''D3''' on motion controller, sent to head via CANBUS and C axis and adjusted for motion acceleration/deceleration<br />
'''Sn''' sets a threshold in seconds; isolated non-printing moves below this threshold will not trigger unprime/prime actions<br />
<br />
Note: E1 D0 is an illegal combination.<br />
<br />
'''Example 1'''<br />
<br />
M229 E1 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E1''' (enabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
''Above is the default way to enable E values.''<br />
<br />
'''Example 2'''<br />
<br />
M229 E0 D0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
<br />
''Above is the default way to ignore E values, and is how v3 and earlier releases work.''<br />
<br />
'''Example 3'''<br />
<br />
M229 E0 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
'''Example 4'''<br />
<br />
M229 E0 D0 S0.02<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning/Parallel Printing ===<br />
<br />
<span style="color: red;">'''NOTE: M703 DOES NOT WORK WITH M229 E1 D1. YOU MUST USE M229 E0 D0, and use our native flow calculations instead of E values'''<br />
<br />
Clone, slave, or parallel printing, is when one head makes a normal print, and another head makes the ''exact same print'' at the same time.<br />
<br />
We will normally execute a T command first, to establish the primary or master head (generally the one to the left). Then the M703 command, cloning or slaving another head to the first. <br />
<br />
Remember, this is how we address the tool positions; note that the 30M and ESR have four positions, not five. Counting from the leftmost position:<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ T Commands and T Variables for Standard Addresses<br />
|-<br />
! style="width: 15%;" | Command<br />
! style="width: 15%;" | <span style="color: red;">1st Slot</span><br />
! style="width: 15%;" | 2nd Slot<br />
! style="width: 15%;" | <span style="color: royalblue;">3rd Slot</span><br />
! style="width: 15%;" | 4th Slot<br />
! style="width: 15%;" | <span style="color: limegreen;">5th Slot</span><br />
|-<br />
! Tool Change<br />
| <span style="color: red;">'''T0'''</span><br />
| T1<br />
| T2<br />
| T3<br />
| T4<br />
|-<br />
! Clone Address<br />
| T11<br />
| T12<br />
| <span style="color: royalblue;">'''T13'''</span><br />
| T14<br />
| <span style="color: limegreen;">'''T15'''</span><br />
|-<br />
! Master Address<br />
| <span style="color: red;">'''S11'''</span><br />
| S12<br />
| S13<br />
| S14<br />
| S15<br />
|-<br />
|}<br />
<br />
In the following example we have a five-position yoke; commands executed by the head in <span style="color: red;">'''slot 1''' (far left)</span> will also be executed by the heads in both <span style="color: royalblue;">'''slot 3''' (third from left)</span> and <span style="color: limegreen;">'''slot 5''' (fifth from left)</span>:<br />
<br />
<span style="color: red;">T0</span><br />
M703 <span style="color: royalblue;">T13</span> <span style="color: red;">S11</span><br />
M703 <span style="color: limegreen;">T15</span> <span style="color: red;">S11</span><br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* <span style="color: red;">'''T0''' - Assign commands to Position 1 (the far left head on yoke 1)</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: royalblue;">'''T13''' - Tool Position 3 </span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: limegreen;">'''T15''' - Tool Position 5</span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
Note that only Hydra (16A) and High Resolution Engine (EHR) units have five tool positions; other models have four only. See '''Understanding the T''' at the top of '''[[Gcode|the Gcode page]]''' for tool position nomenclature.<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M721 Set Unprime Values ===<br />
<br />
M721 sends information to the printer about how much material to unprime (retract) when a transition from printing move to non-printing move is detected.<br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
'''Usage'''<br />
<br />
M721 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds prior to the end of the current printing move to begin the unprime (retract) action; a negative number initiates this before the end of the move<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M721 I1''' would execute an unprime with the previously specified values at that point in the gcode.<br />
<br />
'''Example 1'''<br />
<br />
M721 S10000 E100 P-15 T#<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
'''Example 2'''<br />
<br />
M721 T# I1<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
<br><br />
<hr><br />
<br />
=== M722 Set Prime Values ===<br />
<br />
M722 sends information to the printer about how much material to prime (advance) when a transition from non-printing move to printing move is detected. This is done primarily to compensate for an earlier unprime (retract), to prep the head to be ready to dispense.<br />
<br />
'''Usage'''<br />
<br />
M722 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds to dwell at the start of the next printing move to allow for the prime (advance) action<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M722 I1''' would execute a prime with the previously specified values at that point in the gcode.<br />
<br />
'''Example'''<br />
<br />
M722 S10000 E100 P-15 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (prime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
<br />
'''Example'''<br />
<br />
M722 T# I1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M722''' (prime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
<br />
<br><br />
<hr><br />
<br />
=== M723 Set Manual Flow ===<br />
<br />
M723 tells the designated extruder(s) to advance material for the specified number of pulses (on the motor) at the specified rate, regardless of any X/Y/Z movement. It is normally used only during manual operation, not during gcode execution. It can be used after moving to a location to dispense a set amount of material (like depositing material into reservoirs). We recommend adding a timed pause (G4) after the extrusion command if you want to extrude without moving.<br />
<br />
M723 is also used to activate and set speed on the stirring apparatus on the DMH dynamic mixing head.<br />
<br />
<br />
'''Usage'''<br />
<br />
M723 Sn En T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which the motor should advance, in pulses per second (default: 500);<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute (default of 65535 is essentially "forever");<br />
'''T#''' is the target head<br />
<br />
'''Example'''<br />
<br />
M723 S500 E50000 T#<br />
G4 S5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M723''' (start manual feed) <br />
** '''S500''' (at 500 pulses per second) <br />
** '''E50000''' (for 50000 pulses) <br />
** '''T#''' (target head)<br />
* '''G4''' (Timed pause) <br />
** '''S3''' (3 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M728 Set Motor Current Boost ===<br />
<br />
M728 will set the motor current boost; default is 0.<br />
<br />
'''Usage'''<br />
<br />
M728 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target head (or device)<br />
<br />
'''Example'''<br />
<br />
M728 T# S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M728''' (set motor current boost)<br />
** '''T#''' (target head)<br />
** '''S0''' (off)<br />
<br><br />
<hr><br />
<br />
=== M756 Set Height for Flow ===<br />
<br />
M756 will overwrite the Z value from the M221 command, allowing you to calculate flow for thinner or thicker layers. We declare M756 at the beginning of every layer; normally, they are all the same (unless you sliced for varying layer thicknesses). <br />
<br />
Note: this command is ignored if you are using '''M229 E1 D1''' to enable use of E values.<br />
<br />
Note: this does NOT change your Z position; see G0 or G1 for that.<br />
<br />
'''Usage'''<br />
<br />
M756 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the layer thickness in mm for flow calculations<br />
<br />
'''Example'''<br />
<br />
M756 S0.125<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M756''' (set layer height for flow calculations) <br />
** '''S0.125''' (at 0.125mm)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Position and Offsets''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Position and Offsets<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Set Offsets''<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_to_Physical_Home|G28]] <br />
| Yes || Send to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M702_-_M704_Cloning_Heads|M702-4]] <br />
| Yes || Cloning Heads<br />
|-<br />
|}<br />
<br />
<span style="color: red;">'''DRAGGING A GCODE RENDERING AROUND ON THE PRINT BED DOES NOTHING IN EARLIER VERSIONS!''' <br>Either positiong the stl properly before slicing, or reposition the gcode with a G54 offset - read below.</span>.<br />
<br />
The following commands define if new positioning data is defined in inches (G20) or mm (G21); or from the origin (G90) or from the present location (G91). They also stipulate the offsets from one head to another (M6), and how to invoke that offset (T).<br />
<br />
=== G10 UNUSED<sup>2</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
=== G20 Set Units to Inches ===<br />
<br />
G20 declares that henceforth, measurements will be given in inches.<br />
<br />
'''''Working with G20 is experimental and unsupported on Hyrel equipment. Use at your own risk.'''''<br />
<br />
'''Usage'''<br />
<br />
G20<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G20''' (set units to inches)<br />
<br />
<br><br />
<hr><br />
<br />
=== G21 Set Units to Millimeters ===<br />
<br />
G21 declares that henceforth, measurements will be given in mm.<br />
<br />
'''Usage'''<br />
<br />
G21<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G21<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G21''' (set units to milimeters)<br />
<br />
<br><br />
<hr><br />
<br />
=== G28 Send to Physical Home ===<br />
<br />
G28 sends the specified axes to the sensor-defined physical home position, regardless of logically set 0,0, then pop-off and re-acquire the sensor threshold at a slower rate. This pop-off and re-acquire was implemented during v3.<br />
<br />
After homing, a '''G28''' also resets current offsets to 0 - including any may have been set with a '''G92''' or an H (as defined in an '''M660''' and invoked on a '''G1'''), performs a '''G53''', and applies a head offset of 0 mm (as in an '''M6 O0''').<br />
<br />
Any axis not homed will have its position remain unchanged. We do not support intermediate positioning during homing.<br />
<br />
'''Usage'''<br />
<br />
G28 Xn Yn Zn An Bn I1<br />
<br />
'''Parameters'''<br />
<br />
'''X0''' ensures that the X axis is homed<br />
'''Y0''' ensures that the Y axis is homed<br />
'''Z0''' ensures that the Z axis is homed<br />
'''A0''' ensures that the A axis is homed<br />
'''B0''' ensures that the B axis is homed<br />
<br />
'''Example'''<br />
<br />
G28 X0 Y0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G28''' (home axis)<br />
** '''X0''' (X axis to 0)<br />
** '''Y0''' (Y axis to 0)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== G53 Clear Offsets ===<br />
<br />
G53 sets the fixture offsets to (0,0,0,0,0). This takes no arguments or variables. It does not clear stored offset values.<br />
<br />
'''Usage'''<br />
<br />
G53<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G53<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G53''' (set fixture offsets to 0; no effect on H (head) offsets)<br />
<br />
<br><br />
<hr><br />
<br />
=== G54 - G59 - Set Offsets ===<br />
<br />
G54, G55, G56, G57, G58, and G59 will each store and invoke fixture offsets in the X, Y, Z, A, and/or B axes for all subsequent moves. Any values not invoked will remain with their previous value (0 unless earlier specified otherwise). These offsets apply to all positioning until a new offset is applied, or a '''G53''' is used to clear all offsets.<br />
<br />
This graphic shows how printers (OTHER THAN THE EHR) use the G54-G59 offsets:<br />
<br />
[[File:G54.png|600px]]<br />
<br />
Note that this differs from an '''M6''', where the offsets are only applied to a SINGLE tool position. These offsets are cumulative with '''M6''' values.<br />
<br />
'''Usage'''<br />
<br />
G54 (... G59) Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the offset in mm in the X axis<br />
'''Yn''' is the offset in mm in the Y axis<br />
'''Zn''' is the offset in mm in the Z axis<br />
'''An''' is the offset in mm in the A axis<br />
'''Bn''' is the offset in mm in the B axis<br />
<br />
'''Example'''<br />
<br />
G54 X30 Y-20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G54''' (set units to milimeters)<br />
** '''X30''' (add 30mm to all X positions)<br />
** '''Y-20''' (subtract 20mm from all Y positions)<br />
** (no change to prior stored offsets)<br />
<br />
'''Example'''<br />
<br />
G55<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G55''' (apply new fixture offsets)<br />
** (no variable: use previous G55 values, or as stored under Settings > Printer > Fixture Offsets)<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G90 Absolute Positioning ===<br />
<br />
G90 stipulates that henceforth, the positioning will be calculated from the origin (0,0 point).<br />
<br />
'''Usage'''<br />
<br />
G90<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G90<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G90''' (use absolute positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G91 Relatative Positioning ===<br />
<br />
G91 stipulates that henceforth, the positioning will be calculated relative to the starting position.<br />
<br />
'''Usage'''<br />
<br />
G91<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G91<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (use relative positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G92 Reset Coordinate Offsets ===<br />
<br />
G92 resets the current position to the specified coordinates for all axes enumerated. <br />
<br />
'''Usage'''<br />
<br />
G92 Xn Yn Zn An Bn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new value for the current X position<br />
'''Yn''' is the new value for the current Y position<br />
'''Zn''' is the new value for the current Z position<br />
'''An''' is the new value for the current A position<br />
'''Bn''' is the new value for the current B position<br />
'''En''' is the new value for the current E position<br />
<br />
'''Example'''<br />
<br />
G92 X0 Y50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''X0''' (present X position is 0)<br />
** '''Y50''' (present Y position is 50)<br />
<br />
'''Example'''<br />
<br />
G92 E0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''E0''' (present E position is 0)<br />
<br />
<br><br />
<hr><br />
<br />
=== G93 Clear Coordinate Offsets ===<br />
<br />
G93 clears ALL offsets implemented via '''G92''' command.<br />
<br />
'''Usage'''<br />
<br />
G93<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G93<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G93''' (clear coordinate offset values, all axes)<br />
<br />
<br><br />
<hr><br />
<br />
=== M6 Declare Head Offsets ===<br />
<br />
M6 declares that a particular head holds a set of X, Y, and/or Z offsets, which will be invoked during a T (tool change) command. Repetrel automatically reads this data from the information stored on the heads, and sends it to the printer before the gcode file is loaded.<br />
<br />
'''Usage'''<br />
<br />
M6 T# On Xn Yn Zn An Bn Dn In Kn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the Tool position for which these offsets are being set<br />
'''On''' is the Offset position where these are being stored<br />
'''Xn''' is the offset in the X axis<br />
'''Yn''' is the offset in the Y axis<br />
'''Zn''' is the offset in the Z axis<br />
'''An''' is the offset in the A axis<br />
'''Bn''' is the offset in the B axis<br />
'''Dn''' is the current tool diameter (used with pocket commands)<br />
'''In''' non-persistent; can be default 0 (store values but do not move these distances) or 1 (store values and move these distances)<br />
'''Kn''' persistent setting; can be default 0 (use I value) or 1 (ignore I1 and always act with I0)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40<br />
<br />
This happens (for every head loaded) when you click print, and the head values are sent to the Motion Controller.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** (no move)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40 I1<br />
<br />
This happens when you execute a tool change with '''T#''', and so it triggers the move ('''I1''') to properly position the next head.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** '''I1''' (store and move distances)<br />
<br />
'''Example'''<br />
<br />
M6 K1<br />
<br />
You might include this in your header to change behavior during tool changes.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** (all future T# or M6 commands) <br />
** (no offset registers, so ignore all offsets)<br />
** '''K1''' (always force I0 with M6 unless K0 present (or has been previously set)<br />
<br />
Note that this differs from a G54-G59, where the offsets are applied to EVERY tool position.<br />
<br />
<br><br />
<hr><br />
<br />
=== M660 Assign Tool Height Offset ===<br />
<br />
Used with the High Resolution Engine (and other units which home away from O, like a CNC), an M660 declares that a particular head, when called upon, should print at the gcode-based Z position MODIFIED by this offset, since on these units, the Z-Zero is often BELOW the print surface. By default, this is ONLY used on the EHR (Engine, High Resolution)<br />
<br />
NOTE: You MUST have a '''G28 Z0''' in your header to run this M660 on the EHR.<br />
<br />
'''Usage'''<br />
<br />
M660 Hn Zn<br />
(followed by)<br />
G1 Xn Yn Zn Fn Hn (see '''[[#G1_Working_Move]]''' for other details<br />
<br />
'''Parameters'''<br />
<br />
'''H''' is the head offset register for which these offsets are being set;<br />
'''Z''' is the offset in the Z axis in mm.<br />
<br />
'''Example 1'''<br />
<br />
M660 H2 Z28.2 ; (specified before any moves)<br />
(followed by)<br />
G1 X50 Y75 F4800 H2 ; (specified on the first G1 move)<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M660''' (apply offset) <br />
** '''H2''' (store in register 2)<br />
** '''Z28.2''' (+28.2 to Z position)<br />
* (there may be more commands before the G1 move invoking the H2)<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in Z)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoke offsets stored in register H2)<br />
<br />
To be clear, this requires editing two lines of code:<br />
<br />
In your gcode, you will enter the M660 just before the first layer code. Example: <code>M660 H2 Z28.2 ; set tool height for tool two (Z offset)</code>. On the first move of layer one (usually the Z move), you will add an <code>H</code> value so that this tool height is invoked. <br />
<br />
'''Example 2'''<br />
<br />
Before editing: <br />
<br />
G1 Z0.275 F360 ; move to next layer (0)<br />
(followed by)<br />
G1 X50 Y75 F4800<br />
<br />
After editing:<br />
<br />
G1 Z0.275 F360 '''H2''' ; move to next layer (0) and invoke head Z offset for this tool</code><br />
(followed by)<br />
G1 X50 Y75 F4800 '''H2'''<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning Heads ===<br />
<br />
Clone, slave, or parallel printing, is when multiple heads make the ''exact same print'' at the same time.<br />
<br />
Usage of these commands with version 4 and earlier is explained in detail at '''https://hyrel3d.com/wiki/index.php/Cloning_and_Mixing'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== T Tool Change===<br />
<br />
T executes a tool change, invoking the parameters specified in the M6 sent from Repetrel to the printer at the job start. Do not confuse a T command with a T variable.<br />
<br />
'''See the first entry on this page for details. '''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Lasers and UV Pens''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Lasers and UV Pens<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|--<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
| colspan="3" | [[#Laser_Examples|Laser Examples]]<br />
|-<br />
| colspan="3" | [[#UV_Pen_Examples|UV Pen Examples]]<br />
|}<br />
<br />
<br />
The CO<sub>2</sub> and Diode Lasers and the UV Pens require the following enabling codes:<br />
<br />
=== M620 Enable Device ===<br />
<br />
M620 enables the device.<br />
<br />
'''Usage'''<br />
<br />
M620 T# En An<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool position<br />
'''En''' can be the default 0 (disable) or 1 (enable)<br />
'''An''' is the duration in seconds after shut-off that the cooling remains active; default is 30 (but this will not override temperature safety measures)<br />
<br />
'''Example'''<br />
<br />
M620 T# E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M620''' (enable device) <br />
** '''T#''' (target head - MUST be specified, can NOT be inherited)<br />
** '''E1''' (enable)<br />
<br />
<br><br />
<hr><br />
<br />
=== M621 Set Laser Power ===<br />
<br />
M621 sets the power for the LASER (not other heads).<br />
<br />
'''Usage'''<br />
<br />
M621 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
'''Dn''' is the initial power (similar to a prime) to penetrate material (optional; uses Pn if unspecified)<br />
<br />
Note: No tool is specified; this will happen on the laser already enabled with M620.<br />
<br />
'''Example'''<br />
<br />
M621 P40<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M621''' (activate device) <br />
** '''P40''' (at 40% during "printing" (E-value) moves)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
=== M623 Duration Emit ===<br />
<br />
M623 sets the power for the laser or UV pen, and takes the following parameters:<br />
<br />
'''Usage'''<br />
<br />
M623 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Dn''' is the duration, in miliseconds (only used for static exposures, not during moves)<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
<br />
Note: Dn max for UV pens is 60,000 (1 minute); Dn max for other devices 1,000 (1 second); <br />
<br />
Here are examples:<br />
<br />
M623 P80 D500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D500''' (duration 500 miliseconds)<br />
<br />
M623 P80 D10000 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D10000''' (duration 10 seconds)<br />
<br />
=== Emitting Move Example for the Laser ===<br />
<br />
A sample of code for lasering will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device <br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your lasering job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
=== Emitting Move Example for the UV Pen ===<br />
<br />
A sample of code for UV Curing will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device<br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your curing job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
For more complex examples, see the '''[[UV_and_Clench]]''' page.<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Spindles and Lathes''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Spindles and Lathes<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| G81 || Peck Drilling<br />
|-<br />
|}<br />
<br />
Machining and Spindle Tool commands. Note, we recommend using [http://mr-soft.net/ SimplyCAM].<br />
<br />
You can review the 5-axis gcode we used for [https://www.youtube.com/watch?v=B0lvN-aPYHI this video] from [http://hyrel3d.net/downloads/gcode/Ardes_tube_cap_milling.gcode here].<br />
<br />
=== M3 Turn On Spindle (CW) ===<br />
<br />
M3 tells the printer to activate (start) the spindle motor in the clockwise direction on the current head (if it has one), using the value set on the head for RPM. Note: S0 is the same as turning it off. Note: DO NOT CHANGE DIRECTION while the spindle is in motion.<br />
<br />
'''Usage'''<br />
<br />
M3 T# Sn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Sn''' - power (0-100%)<br />
'''Fn''' - optional; PWM in Hz (defaults on heads should be fine for most uses)<br />
<br />
'''Example'''<br />
<br />
M3 T# S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (activate spindle clockwise)<br />
** '''T#''' (target head)<br />
** '''S75''' (at 75% power) <br />
** (default PWM)<br />
<br />
<br><br />
<hr><br />
<br />
=== M4 Turn On Spindle (CCW) ===<br />
<br />
Please refer to M3, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M5 Turn Off Spindle ===<br />
<br />
M5 tells the printer to deactivate (stop) the spindle motor on the current head (if it has one). M5 has the same effect as M3 S0 or M4 S0.<br />
<br />
'''Usage'''<br />
<br />
M5 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
<br />
'''Example'''<br />
<br />
M5 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (deactivate spindle )<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M253 Turn On Lathe (CW) ===<br />
<br />
M253 tells the printer to activate (start) the lathe motor in the clockwise direction (if it has one), using the value set with M92 for RPM. Only available on Hydra 16A models.<br />
<br />
Note: S0 is the same as turning it off. <br />
<br />
'''Usage'''<br />
<br />
M253 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' - speed in units per minute (default: RPM if set with M92 as steps per revolution)<br />
<br />
'''Example'''<br />
<br />
M253 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M253''' (activate spindle clockwise)<br />
** '''S75''' (at 75 RPM) <br />
<br />
<br><br />
<hr><br />
<br />
=== M254 Turn On Lathe (CCW) ===<br />
<br />
Please refer to M253, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M255 Turn Off Lathe ===<br />
<br />
M255 tells the printer to deactivate (stop) the lathe motor (if it has one). M255 has the same effect as G253 S0 or G254 S0.<br />
<br />
'''Usage'''<br />
<br />
M255 <br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M255 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M255''' (deactivate lathe)<br />
<br />
<br><br />
<hr><br />
<br />
=== G81 Peck Drilling ===<br />
<br />
G81 tells the printer to move to a start position in X/Y and then in Z, and to make (if needed) repeated descents and retracts. This is used to make holes, especially deep holes. Note that the spindle tool is turned on with an M3 or M4 before this command, and turned off with an M5 after all work is done.<br />
<br />
'''Usage'''<br />
<br />
G81 T# Xn Yn In Pn Qn Zn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Xn''' - X position<br />
'''Yn''' - Y position<br />
'''In''' - initial Z position<br />
'''Pn''' - peck downward this many mm during each cycle<br />
'''Qn''' - retract upward this many mm after each cycle (to clear debris)<br />
'''Zn''' - maximum pecking depth<br />
'''Fn''' - Z working speed in mm/min<br />
<br />
'''Example'''<br />
<br />
G81 T# X100 Y75 I3 P3 Q-2 Z-7.5 F200<br />
<br />
''NOTE that an M660 offset must be set and applied BEFORE THIS COMMAND to allow for tool length.''<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G81''' (begin pecking cycle) <br />
** '''X100 Y75''' (move to X/Y starting position X100 Y75) <br />
** '''I3''' (move to Z starting position Z3, which will be our greatest retract height) <br />
** '''P3''' (peck downward an additional 3mm at a time)<br />
** '''Q-2''' (retract upward 2mm after each peck (to clear debris))<br />
** '''Z-7.5''' (peck to a maximum depth of 7.5mm)<br />
** '''F200''' (working (drilling) travel speed of 200 mm/min)<br />
** ''after this, the head will retract up to the I position (Z3 in this case) before moving on to the next line''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Reporting and Diagnostics''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Reporting and Diagnostics<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M670_M670_Enable_Gantry_/_Y-arm_Light|M670]] <br />
| Yes || Enable Y-arm Light<br />
|- || Activate Danger Light<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
|}<br />
<br />
The following commands help with reporting and diagnostics. Most users never need them, but here are the basics. More advanced/detailed reporting is available.<br />
<br />
=== M701 Set Head Reporting ===<br />
<br />
M701 tells heads how often to send head-specific information to the Motion Controller and on to Repetrel (and pass along to a text file if enabled via M719).<br />
<br />
'''Usage'''<br />
<br />
M701 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Pn''' - period in seconds between entries (default 1)<br />
<br />
'''Example'''<br />
<br />
M701 P12<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M701''' (head reporting) <br />
** (currently active head)<br />
** '''P12''' (every 12 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M718 Stop Logging to File ===<br />
<br />
M718 tells Repetrel to stop any logging of data to text file that may have been enabled with M719.<br />
<br />
'''Usage'''<br />
<br />
M718<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M718<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M718''' (logging off) <br />
<br />
<br><br />
<hr><br />
<br />
=== M719 Start Logging to File ===<br />
<br />
M719 tells the Motion Controller what system-wide information to report back to Repetrel, and also tells Repetrel to begin logging these details to a text file.<br />
<br />
'''Usage'''<br />
<br />
M719 Pn Sn <br />
<br />
M719 Pn Xn Yn Zn An Bn Vn En Ln<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' - period in seconds between entries<br />
'''Sn''' - can be default 0 (see options below) or 1 (report ALL data) <br />
'''Xn''' - report X position with each entry<br />
'''Yn''' - report Y position with each entry<br />
'''Zn''' - report Z position with each entry<br />
'''An''' - report A position with each entry<br />
'''Bn''' - report B position with each entry<br />
'''Vn''' - report velocity with each entry<br />
'''En''' - report flow rate with each entry<br />
'''Ln''' - report gcode line number with each entry<br />
<br />
Note: these values are persistent, and if previously enabled, will still be enabled unless disabled with a 0 parameter.<br />
<br />
'''Example 1'''<br />
<br />
M719 P10 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M719''' (logging on)<br />
** '''P10''' (every 10 seconds)<br />
** '''S1''' (report everything)<br />
<br />
'''Example 2'''<br />
<br />
M719 P.1 Xn Yn Zn Ln<br />
<br />
* '''M719''' (logging on)<br />
** '''P.1''' (every 0.1 seconds)<br />
** '''X1''' (report X position)<br />
** '''Y1''' (report Y position)<br />
** '''Z1''' (report Z position)<br />
** (don't report A position)<br />
** (don't report B position)<br />
** (don't report velocity)<br />
** (don't report flow rate)<br />
** '''L1''' (report line number)<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Enable Gantry / Y-arm Light ===<br />
<br />
M670 sets the intensity of the Y-arm LEDs.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the (percent of duty cycle, 0-100) for the LEDs<br />
'''Pn''' is the period (on-off interval - default is 1 second)<br />
<br />
'''Example 1'''<br />
<br />
M670 S50 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S50''' (50% duty cycle)<br />
** '''P1''' (1 second cycle)<br />
<br />
This would turn the Y-arm light on for 50% of 1 second, then off for 50% of 1 second - or on for 0.5 seconds, off for 0.5 seconds.<br />
<br />
'''Example 2'''<br />
<br />
M670 S25 P4<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S25''' (25% duty cycle)<br />
** '''P4''' (4 second cycle)<br />
<br />
This would turn the Y-arm light on for 25% of 4 second, then off for 75% of 4 seconds - or on for 1 second, off for 3 seconds.<br />
<br />
<br><br />
<hr><br />
<br />
=== M672 Set Gantry / Y-arm State ===<br />
<br />
M672 can be used to have the Gantry / Y-arm light change states to reflect the state of a sensor. For example, you can have it come on when the X axis is homed, or when the Y axis has a fault.<br />
<br />
'''Usage'''<br />
<br />
M672 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' can be (unlisted numbers are unused at present):<br />
'''0''' : Normal on/off<br />
'''10''' : X Home<br />
'''11''' : X Limit1<br />
'''12''' : X Limit2<br />
'''13''' : X Fault<br />
'''20''' : Y Home<br />
'''21''' : Y Limit1<br />
'''22''' : Y Limit2<br />
'''23''' : Y Fault<br />
'''30''' : Z Home<br />
'''31''' : Z Limit1<br />
'''32''' : Z Limit2<br />
'''33''' : Z Fault<br />
'''40''' : A Home<br />
'''41''' : A Limit1<br />
'''42''' : A Limit2<br />
'''43''' : A Fault<br />
'''50''' : B Home<br />
'''11''' : B Limit1<br />
'''52''' : B Limit2<br />
'''53''' : B Fault<br />
'''60''' : C Home<br />
'''61''' : C Limit1<br />
'''62''' : C Limit2<br />
'''63''' : C Fault<br />
<br />
'''Example'''<br />
<br />
M672 S<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M672''' (map Y-arm light to state of sensor)<br />
<br />
<br><br />
<hr><br />
<br />
=== M772 Reset All Metrics ===<br />
<br />
M772 will reset all internal gathering registers to '''0'''.<br />
<br />
'''Usage'''<br />
<br />
M772 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' 0 is default; S can be...<br />
'''0''' reset all values only<br />
'''1''' also generates a basic printing report<br />
'''255''' also generates all possible reports (helpful for advanced debugging)<br />
<br />
'''Example'''<br />
<br />
M772 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M772''' (reset all metrics)<br />
** '''S1''' (and generate basic printing report<br />
<br />
<br><br />
<hr><br />
<br />
=== M773 Generate Basic Report ===<br />
<br />
M773 generates a basic report of printing statistics (including average speed, number of primes, etc.)<br />
<br />
Note: this report will be more meaningful if you use '''M772''' to reset these counters at the start of a job.<br />
<br />
'''Usage'''<br />
<br />
M773<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M773<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M773''' (generate basic report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M773 - print job metrics Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Time (s) Dist (m)<br />
>IN: 50: -------- --------<br />
>IN: 50: Totals: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Printing moves: 0.0 0.000<br />
>IN: 50: Non-printing moves 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Accelerating: 0.0 0.000<br />
>IN: 50: Cruising: 0.0 0.000<br />
>IN: 50: Decelerating: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: can e steps issued: 0<br />
>IN: 50: approx filament (PI*d) 0.000 m<br />
>IN: 50: approx filament (PIr^2) 0.000 m<br />
>IN: 50: unprimes issued: 0<br />
>IN: 50: primes issued: 0<br />
>IN: 50: unprime-primes avoided: 0<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M773 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Aux Devices''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Aux Devices<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
|}<br />
<br />
<br />
Individual port control commands.<br />
<br />
=== M7 Activate Aux 1 ===<br />
<br />
[[File:M7m8m9_ehr.jpg|thumb|12VDC Ports on EHR|right]]<br />
<br />
[[File:M7m8m9_30m_esr.jpg|thumb|12VDC Ports on 30M, ESR|right]]<br />
<br />
M7 sends 12VDC to the port associated with "Mist Coolant", which we sometimes call Aux1. With no parameters, it is read as M7 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M7 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 1 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 1 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M7 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M7 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M7 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S0''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M7 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M8 Activate Aux 2 ===<br />
<br />
M7 sends 12VDC to the port associated with "Flood Coolant", which we sometimes call Aux2. With no parameters, it is read as M8 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M8 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 2 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 2 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M8 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M8 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M8 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M8 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M9 Deactivate Aux1 & Aux2 ===<br />
<br />
M9 cuts power to both Aux1 and Aux2. It is equivalent to running M7 S0 and M8 S0.<br />
<br />
'''Usage'''<br />
<br />
M9<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M9<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M9''' (set Aux 1 and Aux 2 to value 0 (off)) <br />
<br />
<br><br />
<hr><br />
<br />
=== M620 Activate Emitter ===<br />
<br />
See [[#M620_Enable_Device]] above.<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Activate Y-Arm (Gantry) Lights ===<br />
<br />
M670 sends 12VDC to the port associated turning on the Gantry (16A) or Y-arm (30M, ESR) lights.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M670 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M670 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M670 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M671 Activate X-Arm (Danger) Lights ===<br />
<br />
M671 sends 12VDC to the port associated turning on the X-arm / Danger lights (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M671 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M671 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M671 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M675 Activate Response LEDs ===<br />
<br />
M675 sends 12VDC to the port associated turning on the Response LEDs (30M/16A only).<br />
<br />
'''Usage'''<br />
<br />
M675 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M675 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M675 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M675 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M676 Activate Recirc. Fan ===<br />
<br />
M676 sends 12VDC to the port associated turning on the Recirc. Fan (16A only).<br />
<br />
'''Usage'''<br />
<br />
M676 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M676 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M676 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M676 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M677 Activate Buzzer ===<br />
<br />
M677 sends 12VDC to the port associated turning on the Buzzer (older 30Ms only).<br />
<br />
'''Usage'''<br />
<br />
M677 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M677 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M677 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M677 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M678 Activate Laser X-hair ===<br />
<br />
M678 sends 12VDC to the port associated turning on the Laser X-hair (16A with CO<sub>2</sub> lasers only).<br />
<br />
'''Usage'''<br />
<br />
M678 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M678 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M678 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M678 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
<br><br />
<hr><br />
<br />
=== M679 Activate Vacuum ===<br />
<br />
M679 sends 12VDC to the port associated turning on the Vacuum (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M679 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M679 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M679 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M684 Activate Exhaust ===<br />
<br />
M671 sends 12VDC to the port associated turning on the Exhaust (16A only).<br />
<br />
'''Usage'''<br />
<br />
M684 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M684 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M684 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M684 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M685 Set Power on Air ===<br />
<br />
M685 sends 12VDC to the port associated turning on the (positive pressure) Air (16A only).<br />
<br />
'''Usage'''<br />
<br />
M685 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M685 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M685 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' Air value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M685 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M689 Activate Ext. Head ===<br />
<br />
M689 sends 12VDC to the port associated turning on the Ext. Head.<br />
<br />
'''Usage'''<br />
<br />
M689 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M689 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M689 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M689 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M783 Tie Aux to Extrusion ===<br />
<br />
M783 can tie some auxiliary port (like Aux 1, normally controlled by M7, or Aux 2, normally controlled by M8, etc.) to be powered (at 100%) during a certain head's extrusion. Some users use this so that they can print with Ultimus or Viscotec heads on our equipment. See also [[#M7_Set_Power_On_Aux_1|M7]] and [[#M8_Set_Power_On_Aux_2|M8]].<br />
<br />
Note: M619 can be used to map which port M783 ties to - contact us for more information.<br />
<br />
'''Usage'''<br />
<br />
M783 T# <br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool to which the designated aux port will be tied<br />
<br />
'''Example'''<br />
<br />
M783 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M783''' (Tie current Aux port to status of head)<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Other Commands''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Other Commands<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
Other commands.<br />
<br />
=== M17 Engage Motors ===<br />
<br />
M17 will apply power to all motors (positioning and extruder motors), locking them at their current postion; this prevents the bed and yoke from being pushed manually in the X and Y. <br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M17''' (engage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M18 Disengage Motors ===<br />
<br />
M18 will cut power to all motors (positioning and extruder motors), unlocking them; this allows the motors to cool down (as they normally lock in place while still), as well as allowing one to manually push the bed and yoke in the X and Y. It also notifies the GUI that motors are disabled. All axes with homes must be rehomed after an M18.<br />
<br />
Note this is identical to '''M84''' and the opposite of '''M17'''.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M18''' (disengage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M30 End of Program ===<br />
<br />
M30 tells the printer that this job is complete. No gocde after an M30 will be executed as part of the previous job.<br />
<br />
Note M30 also dissolves any cloning setups, changes head index to 0, clears fixture offsets (G53), clears any M229 E-value settings, resets M106 persistent range, resets any printing errors, resets M660 head offsets to 0, resets heads to their stored values, and triggers any queued reports.<br />
<br />
'''Usage'''<br />
<br />
M30<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M30<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M30''' (end or program) <br />
<br />
<br><br />
<hr><br />
<br />
=== M84 Disable Motors ===<br />
<br />
M84 invokes an M18. Please see M18 for usage.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
<br><br />
<hr><br />
<br />
=== M790 New Layer Actions ===<br />
<br />
M790 will trigger any associated new layer actions, which can include capturing an image from the designated camera. It takes no parameters.<br />
<br />
=== M791 Snap Image ===<br />
<br />
M791 will cause the camera selected under the Interface > Camera1 tab, if set to live video, to capture an image and save it to <code>C:\Users\hyrel\Pictures\HyrelPrinterPictures\Camera1</code>, named <code>pic#.png</code><br />
<br />
=== M792 Execute Action ===<br />
<br />
M792 causes Repetrel to perform an action, such as displaying an image or making a warning beep.<br />
<br />
'''Usage'''<br />
<br />
M792 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M792 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M792''' (execute action) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== Gcode Header ==<br />
<br />
Here are some sample headers for Gcode on our equipment:<br />
<br />
=== 16A, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
M190 S100 ; bed preheat : set and wait<br />
M140 S[bed_temperature] ; bed temp : set, no wait<br />
M104 T12 S[temperature] ; head temp : set, no wait<br />
<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M190 S[bed_temperature] ; bed temp : set and wait<br />
M109 T12 S[temperature] ; head temp : set and wait<br />
<br />
T1 ; use SECOND tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 ///////////////</code><br />
<br />
=== 30M and ESR, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
G28 Z0 ; home, goto : Z (ignored if no Z home)<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
;M190 S[bed_temperature] ; bed temp : set and wait <= COMMENTED OUT<br />
;M109 T11 S[temperature] ; head temp : set and wait <= COMMENTED OUT<br />
<br />
T0 ; use FIRST tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 ///////////////<br />
<br />
== Gcode Footer ==<br />
<br />
=== Standard, All Models ===<br />
<br />
Below is our standard Gcode footer, which should be at the end of all your gcode files:<br />
<br />
; /////////////// BEGIN HYREL STANDARD FOOTER - 2021.02.12 \\\\\\\\\\\\\\\<br />
<br />
; temp control:<br />
<br />
<br />
M107 T100 ; fans, diodes : off<br />
M620 T100 E0 ; CO2 lasers ; off<br />
M104 T100 S0 ; head temps : off<br />
M140 T90 S0 ; bed temps : off<br />
M5 ; spindles : off<br />
<br />
; housekeeping<br />
<br />
G91 ; coordinates : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
G0 Y0 ; home, goto : Y axis<br />
G0 X0 ; home, goto : X axis<br />
M84 ; motors : disable<br />
G53 ; clear offsets<br />
M30 ; program : end<br />
<br />
; \\\\\\\\\\\\\\\ END HYREL STANDARD FOOTER - 2021.02.12 ///////////////</div>Davohttps://hyrel3d.com/wiki/index.php?title=Gcode&diff=7763Gcode2024-03-06T14:25:39Z<p>Davo: /* M221 Set Flow Rate */</p>
<hr />
<div><br />
<br />
__NOTOC__<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! Main Sections<br />
|-<br />
| [[#What_is_GCode.3F | What is GCode?]]<br />
|-<br />
| [[#Understanding_the_T | Understanding the T]]<br />
|-<br />
| [[#Most_Commonly_Edited_Gcodes | Most Commonly Edited GCodes]]<br />
|-<br />
| [[#Controlling_Movement | Controlling Movement]]<br />
|-<br />
| [[#Controlling_Temperature | Controlling Temperature]]<br />
|-<br />
| [[#Controlling_Material_Flow | Controlling Material Flow]]<br />
|-<br />
| [[#Controlling_Position_and_Offsets | Controlling Position and Offsets]]<br />
|-<br />
| [[#Controlling_Lasers_and_UV_Pens | Controlling Lasers and UV Pens]]<br />
|-<br />
| [[#Controlling_Spindles_and_Lathes | Controlling Spindles and Lathes]]<br />
|-<br />
| [[#Reporting_and_Diagnostics | Reporting and Diagnostics]]<br />
|-<br />
| [[#Controlling_Aux_Devices | Controlling Aux Devices]]<br />
|-<br />
| [[#Other_Commands| Other Commands]]<br />
|-<br />
| [[#Gcode_Header| Gcode Headers]]<br />
|-<br />
| [[#Gcode_Footer| Gcode Footer]]<br />
|-<br />
|}<br />
<br />
Note: Codes in Black are supported on version 4 and above (v4+), and most likely on version 3 as well.<br />
<br />
<span style="color:darkorange;">Note: Codes in Orange are supported on version 5 and above (v5+) only.<br />
<br />
Note that Repetrel versions prior to 4.2 can not properly process gcode with "tab" characters - tab was a reserved character.<br />
<br />
== What is GCode? ==<br />
<br />
'''Everything your Hyrel 3D Printer does is done by executing GCode''', whether you are aware of it or not. <br />
<br />
Every button you press on the screen sends a gcode to the printer.<br />
<br />
When you start a job (by pressing "Print"), the settings from your head are sent to the printer (including flow and prime/unprime values); then the gcode file is sent, line by line, to the printer.<br />
<br />
All parameters are persistent, so once they are set, they will remain in place unless or until you (or the file) sends a new, updated value (including setting to 0).<br />
<br />
Please note that there are many flavors of gcode, and while most have the same (or very similar) G0-G100 and M0-M100, codes above 100 are largely nonstandard.<br />
<br />
''It is important to remember that different variable letters can have different meanings, depending on the G- or M- code being used'' - '''''especially the T value.'''''<br />
<br />
The Table of Contents to the right lists the main categories of Gcodes.<br />
<br />
Below is a table listing them in numerical order (click '''Expand''' to expand):<br />
<br />
{| border="1" class="wikitable mw-collapsible mw-collapsed"<br />
|+ Code_Chart<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_X,_Y_to_Physical_Home|G28]] <br />
| Yes || Send X, Y to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| Yes || Peck Drilling<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#M619_Map_Aux_Port|M619]] <br />
| Yes || Map Aux Port<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Set Unprime Values<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Set Prime Values<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
=== '''Header Explained''' ===<br />
<br />
Please visit [[GCode Header]] for a detailed description of our standard GCode headers.<br />
<br />
== '''Understanding the T''' ==<br />
<br />
A '''T Command''' changes which head has the focus of the motion controller and is executing the gcode. Each of our printers have at least four tool positions.<br />
<br />
The use of T commands and variables changes greatly (for the better) with the jump to version 5 from the previous versions.<br />
<br />
Please see '''[[T_v4]]''' for CURRENT (v4 and earlier) use, where the nomenclature for '''T Commands''' and the '''T Variables''' are not the same.<br />
<br />
We will use a '''T#''' in the descriptions below to avoid confusion; please find the correct designation for your version by following the links above.<br />
<br />
== '''Most Commonly Edited Gcodes''' ==<br />
<br />
Below are the gcodes users should first become familiar with. <br />
<br />
=== Tool Changes ===<br />
<br />
'''T0''' tells the printer to perform extrusion (or emission) from the tool in the far left position<br><br />
'''T1''' tells the printer to perform extrusion (or emission) from the tool in the second-from-left position<br><br />
'''T2''' tells the printer to perform extrusion (or emission) from the tool in the third-from-left position<br><br />
'''T3''' tells the printer to perform extrusion (or emission) from the tool in the fourth-from-left position<br><br />
'''T4''' tells the printer to perform extrusion (or emission) from the tool in the fifth-from-left position (if available)<br />
<br />
=== Movement ===<br />
<br />
'''G0''' for "rapid", non-printing moves<br><br />
'''G1''' for "working speed" moves, which may be printing (with E value) or non-printing (no E value)<br />
<br />
=== Temperature ===<br />
<br />
'''M104''' to set head temp<br><br />
'''M109''' to set and wait for head temp<br><br />
'''M140''' to set bed temp<br><br />
'''M190''' to set and wait for bed temp<br />
<br />
=== Others ===<br />
<br />
Which commands to learn from here will depend on what the user intends to do with the equipment.<br />
<br />
== '''Controlling Movement''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Movement<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
|}<br />
<br />
=== G0 Rapid Move ===<br />
<br />
G0 is a rapid positioning move. It is not a ''working'' move, meaning that your equipment will not be printing, milling, lasering, or doing any other active work during a G0 move. G0 is intended to move your tool to a new position, where the work will happen. Accordingly, G0 movement speeds are set in your configuration settings, rather than being specified in your gcode file. <br />
<br />
Special note: a G0 command will take an F variable as a nonpersistent, one-time velocity setting. <br />
<br />
'''Usage'''<br />
G0 Xn Yn Zn An Bn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G0 X50 Y75 Z10<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G0''' (rapid (nonprinting) straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** '''Z10''' (10mm in the Z) <br />
** (no change in A)<br />
** (no change in B)<br />
** (no change in F, use settings-specified feed rate)<br />
<br><br />
<hr><br />
<br />
=== G1 Working Move ===<br />
<br />
G1 is a working move, during which you may be printing, milling, lasering, or doing other active work - provided an E (extrude) value is given. In native mode (if you don't add '''M229 E1 Dn''', the value of Extrusion rate E will be ignored, but E will trigger a working or printing move. In E-value mode (by adding '''M229 E1 Dn''', the slicer-determined E value will be used to control material flow. G1 moves are made at the rate indicated by the F (feed rate) value; if no F value is specified, the last F value set will be used. See '''[[#M229_Use_E_Values|M229]]''' for more details.<br />
<br />
'''Usage'''<br />
G1 Xn Yn Zn An Bn Fn Sn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''En''' is the cumulative E axis (extrusion) position to move (or advance) to<br />
'''Hn''' is the stored head offset to apply (see '''M660''' to store offsets)<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
'''Sn''' is a one-time (non-persistent) material flow rate multiplier (rarely used) applied to this move only<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases; there will be problems with an entire model sliced in relative mode. Relative is intended for special operations like drilling holes.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G1 X50 Y75 E1 F1800 H2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in A)<br />
** (no change in B)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoking offsets stored in register H2)<br />
** (no temporary scaling)<br />
<br />
<br><br />
<hr><br />
<br />
=== G2 Clockwise Arc ===<br />
<br />
A G2 move specifies a clockwise arc (or complete circle) from the current position to position (X,Y,Z)<sub>curr</sub> by following an arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J). <br />
<br />
'''Usage'''<br />
<br />
G2 Xn Yn Zn In Jn Fn En Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 F1800<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 S6<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** (using previously established F rate)<br />
** '''S6''' (made up of six sides - resulting in a hexagon with one point at the origin, with all corners inscribed on the circle)<br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G2-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G2-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G2-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G2-4.png]]<br><br />
Note, if no endpoints are defined, G2 will make a 360° circle by default.<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool1.png]]<br />
<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.1 Spiral CW Arc<sup>1</sup> ===<br />
<br />
A G2.1 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Effective ending X/Y is always the same as the current XY and is not specified (though the actual final position is a function of the number of laps, the pitch, and the reverse code. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). An important feature is the "reverse code" to allow the creation of frog toes without having to jump over the frog toe once it's made. <br />
<br />
'''Usage'''<br />
<br />
G2.1 Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Note: '''In''' and '''Jn''' both default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Pn''' is the pitch (how close the laps are) in mm (required)<br />
'''Ln''' is the number of laps to complete (must be a positive integer; you don't need to finish the spiral)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Rn''' is a flag; 0 to spiral in (default), 1 to spiral out (after inward jump), 2 spiral out from current position<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.1 I15 J20 P1.2 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** (complete all laps)<br />
** '''P1.2''' (1.2 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (use default R of 0, spiral in toward center from current location)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.1 Z10 I15 J20 P0.5 L50 E1 S9 R1 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''L50''' (complete no more than 50 laps)<br />
** '''P0.5''' (0.5 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''R1''' (spiral out from center to current location)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.1 I25 J0 P4 L3 E1 ; spiral in 3 laps, 4mm pitch <br />
G1 X14 E1 ; add connector for the arcs<br />
G2.1 I11 J0 P4 L3 E1 R2 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool2.1.png]]<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.2 Spiral CW Arc<sup>2</sup> ===<br />
<br />
A G2.2 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Unlike G2.1, G2.2 specifies final X/Y (and Z) location. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). Unlike G2.1, G2.2 does not require a reverse code as the direction of spiral is determined by the positional relationship of the current position, final position, and center position.<br />
<br />
'''Usage'''<br />
<br />
G2.2 Xn Yn Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Starting with Motion Controller firmware 4.203a:''<br />
''If I and J are both zero (center = start), path will spiral outward CCW from current to final position.''<br />
''If I and J match the end (center = end), path will spiral inward CW from current to final position."<br />
'''Pn''' is the pitch (how close the laps are) in mm (optional)<br />
'''Ln''' is the number of laps (or paths) to complete (you don't need to finish the spiral)<br />
''Note, if P and L values conflict, L will be modified to match what P will allow; at least one must be specified<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.2 I15 J20 P1 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (1mm between centers of travel of adjacent laps)<br />
** (complete all laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.2 Z10 I15 J20 P2 L50 E1 S9 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (2mm between centers of travel of adjacent laps)<br />
** '''L50''' (complete no more than 50 laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.2 X12 I25 P4 E1 ; spiral in 3 laps, 4mm pitch<br />
G1 X14 E1 ; add connector to next spiral<br />
G2.2 X2 I11 P4 E1 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode also generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.3 3-Space CW Arc ===<br />
<br />
A G2.3 move specifies a clockwise arc (or complete circle(s) from the current position to position (X,Y,Z)<sub>curr</sub> following a circular arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J, Z<sub>curr</sub>+K). Unlike G2, G2.1 and G2.2, G2.3 is not bound to the X/Y plane. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). <br />
'''Usage'''<br />
<br />
G2.3 Xn Yn Zn An Bn In Jn Kn Un Vn Wn Dn Pn En Sn Fn<br />
<br />
Note: If we are in G16 mode, Un, Vn, Wn define the vector normal to the work plane. If we are in G17 (X/Y plane) or G18 (X/Z plane) or G19 (Y/Z plane) mode, these are ignored.<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to end at<br />
'''Yn''' is the new Y position to end at<br />
'''Zn''' is the new Z position to end at<br />
'''An''' is the new A position to end at (4th axis)<br />
'''Bn''' is the new B position to end at (5th axis)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Kn''' is the '''''relative''''' distance from the current Z position to the center position about which to arc (default 0)<br />
''Note: '''In''', '''Jn''', and '''Kn''' all default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Un''' is the X component of a vector normal to the working plane (default 0)<br />
'''Vn''' is the Y component of a vector normal to the working plane (default 0) <br />
'''Wn''' is the Z component of a vector normal to the working plane (default 0)<br />
'''Dn''' is the overall displacement normal to the working plane for this element<br />
'''Pn''' is the pitch (how close the laps are normal to the working plane) in mm (default 0; one path, no incremental displacement)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3 Counterclockwise Arc ===<br />
<br />
Please refer to G2, above, for details. All options are identical, with the exception of direction (CCW). <br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G3-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G3-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G3-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G3-4.png]]<br><br />
Note, if no endpoints are defined, G3 will make a 360° circle by default.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.1 Spiral CCW Arc<sup>1</sup> ===<br />
<br />
Please refer to G2.1, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.2 Spiral CCW Arc<sup>2</sup> ===<br />
<br />
Please refer to G2.2, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.3 3-Space CCW Arc ===<br />
<br />
Please refer to G2.3, above, for details. All options are identical, with the exception of direction (CCW).<br />
<br />
<br><br />
<hr><br />
<br />
=== G4 Timed Pause ===<br />
<br />
G4 is a pause for a set number of seconds (S) or milliseconds (P). <br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
'''Usage'''<br />
<br />
G4 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the number of Seconds to pause<br />
'''Pn''' is the number of Milliseconds to pause<br />
<br />
You may use '''S''' or '''P''', or if you use both, the total value will be the pause duration.<br />
<br />
'''Example'''<br />
<br />
G4 S0.5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''S0.5''' (0.5 seconds)<br />
<br />
'''Example'''<br />
<br />
G4 P500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''P500''' (500 milliseconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== G16 Arc Plane: Any ===<br />
<br />
G16 permits free-form designation of points in space, without limiting them to an axial plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G16<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G16<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G16''' (allow element in any orientation) <br />
<br />
<br><br />
<hr><br />
<br />
=== G17 Arc Plane: XY ===<br />
<br />
G17 restricts this element to the X/Y plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G17''' (restrict element to X/Y plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G18 Arc Plane: XZ ===<br />
<br />
G18 restricts this element to the X/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G18''' (restrict element to X/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G19 Arc Plane: YZ ===<br />
<br />
G19 restricts this element to the Y/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G19<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G19<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G19''' (restrict element to Y/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== M0 Stop Until Resume ===<br />
<br />
M0 is a stop until resume command; text listed after a semicolon will be displayed, and clicking the '''Play''' button (which replaces the '''Pause''' button) will cause the job to resume. Note that all lines will be truncated at 100 characters.<br />
<br />
* ''';''' All text following the ''';''' will be echoed to the print mask (Control Tab).<br />
<br />
Additionally, an M0 command can also take the following parameters, and so will pause and then:<br />
<br />
'''Usage'''<br />
<br />
M0 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume)<br />
<br />
'''Example'''<br />
<br />
M0 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
=== M203 Set G0 Speed ===<br />
<br />
M203 will redesignate the rate at which [[#G0 Rapid Move|G0]] movements are executed. If undeclared, the values stored in Repetrel for your equipment will be used. These can be changed under '''Settings > Printer''', on the '''Printer''' tab. The values set on your unit are set based on testing; exceed them at your own risk.<br />
<br />
'''Usage'''<br />
<br />
M203 Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new speed in the X axis for G0 moves<br />
'''Yn''' is the new speed in the Y axis for G0 moves<br />
'''Zn''' is the new speed in the Z axis for G0 moves<br />
'''An''' is the new speed in the A axis for G0 moves<br />
'''Bn''' is the new speed in the B axis for G0 moves<br />
<br />
'''Example'''<br />
<br />
M203 Y2000<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M203''' (Set G0 Speed) <br />
** (X remains unchanged)<br />
** '''Y2000''' (Y axis: 2000mm/min)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== M674 Use Turbo Mode ===<br />
<br />
M674 will enable Turbo Mode, where certain non-printing (no E value) working (G1, G2, or G3) moves will be treated as G0 moves (executed at "rapid move speed" rather than "working move speed"). Killing a job will clear the M674 setting.<br />
<br />
'''Usage'''<br />
<br />
M674 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the minimum distance threshold for Turbo Mode to activate, and is required; no S value returns an error.<br />
<br />
'''Example 1'''<br />
<br />
M674 S2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S2''' (for moves of 2 mm or greater) <br />
<br />
'''Example 2'''<br />
<br />
M674 S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S50''' (for moves of 50 mm or greater)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Temperature''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Temperature<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
|}<br />
<br />
What's Hotbed 2 and Chamber 2? Well, our Hydra models have room to have a second hotbed, which could be a smaller, higher temperature hotbed, or a sub-ambient chilled bed, or even a High Resolution hotbed. And we've talked about having a smaller chamber inside the primary chamber, to bring the air around the print (but not the head) to much higher temperatures; call for details.<br />
<br />
<br><br />
<hr><br />
<br />
=== M104 Set Temp (Head) ===<br />
<br />
M104 sets the extruder temperature but does not pause the printer. <br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M104 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the tool assignment for this temperature command<br />
<br />
'''Example'''<br />
<br />
M104 T# S75 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M104''' (Set Temperature) <br />
** '''T#''' (target head)<br />
** '''S75''' (to 75°C)<br />
<br />
<br><br />
<hr><br />
<br />
=== M106 Set Cooling / Etc. ===<br />
<br />
M106 sets the cooling fan (or crosslinking LEDs) speed (or intensity). This also turns on the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M106 Cn<br />
<br />
or<br />
<br />
M106 T# Sn<br />
<br />
or <br />
<br />
M106 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head<br />
'''Sn''' is the percent of duty cycle for the cooling fan (or LEDs); default: 100<br />
'''Cn''' is the range (0-100 or 0-255) that we will use; if unspecified, the default is C100 (use C255 to be compatible with most slicers)<br />
'''Pn''' is the percent of duty cycle for the cooling fan (or LEDs) ''to come on only during extrusion moves''<br />
<br />
'''Example'''<br />
<br />
M106 C255<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** (on all tools)<br />
** (no speed)<br />
** '''C255''' (of range 0-255)<br />
<br />
Note, with this command, all following M106 commands for the rest of this print job will be based on this range (unless specified with a new C value).<br />
<br />
'''Example'''<br />
<br />
M106 T# S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''S50''' (target value of 50)<br />
** (previously defined (or default 0-100) range)<br />
<br />
'''Example'''<br />
<br />
M106 T# P100 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''P100''' (during extrusion moves at 100% duty cycle<br />
<br />
<span style="color: blue;">''But Davo, I want to cure a certain spot for 10 seconds with every layer change; how do I do this?''</span><br />
<br />
Easy. Edit your slicer recipe to add the following code after layer changes (edit as needed for duration, intensity, or position):<br />
<br />
;---- BEGIN COD CODE<br />
G91 ; relative moves<br />
G0 Z5 ; drop bed<br />
G90 ; absolute moves<br />
G0 X130 Y110 ; move into position<br />
M106 S100 T# ; turn on T# UV at 100%<br />
G1 X140 Y110 F100 ; move 10 mm in the X at 100 mm/min<br />
G1 X140 Y120 F100 ; move 10 mm in the Y at 100 mm/min<br />
G1 X130 Y120 F100 ; move -10 mm in the X at 100 mm/min<br />
G1 X130 Y110 F100 ; move -10 mm in the Y at 100 mm/min<br />
M106 S0 T# ; turn off T# UV (set it to 0%)<br />
;--- END COD GCODE<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (Use relative moves)<br />
* '''G0''' (Non-working move)<br />
** '''Z5''' (+5 mm in the Z)<br />
* '''G90''' (Use absolute moves)<br />
* '''G0''' (Non-working move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S100''' (100% duty)<br />
** '''T#''' (On target head)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S0''' (0% duty)<br />
** '''T#''' (On target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M107 Stop Cooling / Etc. ===<br />
<br />
M107 turns off the cooling fan (or crosslinking LEDs); this is essentially the same as an M106 S0 (setting it to 0 percent). This will also turn off the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M107 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (target head)<br />
<br />
'''Example'''<br />
<br />
M107 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M107''' (Set Cooling/LEDs to 0%) <br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M109 Wait for Temp (Head) ===<br />
<br />
M109 waits for the extruder to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) heads as options.<br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M109 T# Sn Hn Cn Ln Un Rn <span style="color:darkorange;">W0<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M109 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head - (required)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<span style="color:darkorange;">'''W0''' if present, will set the temp and advance to the next line without pause, but upon executing M116, will pause until temp is reached<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M109 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M109 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M109 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M109 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M109 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M109 R10<br />
<br />
* '''M109''' (wait for temp)<br />
** (no T# - use head with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<span style="color:darkorange;">'''Example 7'''<br />
<br />
<span style="color:darkorange;">M109 T# S240 W0<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M109''' (wait for temp) <br />
** <span style="color:darkorange;">'''T#''' (target head)<br />
** <span style="color:darkorange;">'''S240''' (and set temp to 240°C)<br />
** <span style="color:darkorange;">'''W0''' (but do not pause until M116 is executed)<br />
<br />
<br><br />
<hr><br />
<br />
=== <span style="color:darkorange;">M116 Wait for Temps (v5+)</span> ===<br />
<br />
<span style="color:darkorange;">M116 is supported with version 5.x and later (v5+) of Repetrel Software and Motion Controller Firmware.<br />
<br />
<span style="color:darkorange;">'''Usage'''<br />
<br />
<span style="color:darkorange;">M116 <br />
<br />
<span style="color:darkorange;">'''Parameters'''<br />
<br />
<span style="color:darkorange;">'none'<br />
<br />
<span style="color:darkorange;">'''Example'''<br />
<br />
<span style="color:darkorange;">M116<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M116''' (wait for any set temps (M109, M190, M191) with '''W0''' values before proceding<br />
<br />
<br><br />
<hr><br />
<br />
=== M140 Set Temp (Bed) ===<br />
<br />
M140 sets the bed temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M140 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target bed (default is the primary bed)<br />
<br />
'''Example'''<br />
<br />
M140 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M140''' (set bed temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary bed)<br />
<br />
<br><br />
<hr><br />
<br />
=== M141 Set Temp (Chamber) ===<br />
<br />
M141 sets the chamber temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M141 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target chamber (default is the primary chamber)<br />
<br />
'''Example'''<br />
<br />
M141 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M141''' (set chamber temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary chamber)<br />
<br />
<br><br />
<hr><br />
<br />
=== M190 Wait for Temp (Bed) ===<br />
<br />
M190 waits for the bed to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) beds as options.<br />
<br />
'''Usage'''<br />
<br />
M190 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M190 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (optional) is the target bed (default is the primary (or only) bed)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M190 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M190 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M190 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M190 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M190 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M190 R10<br />
<br />
* '''M190''' (wait for temp)<br />
** (no T# - use bed with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
=== M191 Wait for Temp (Chamber) ===<br />
M191 waits for the chamber to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) chambers as options.<br />
<br />
'''Usage'''<br />
<br />
M191 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M191 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target chamber (default is the primary (or only) chamber)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M191 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M191 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M191 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M191 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M191 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M191 R10<br />
<br />
* '''M191''' (wait for temp)<br />
** (no T# - use chamber with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Material Flow''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Material Flow<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Unprime or Retract<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Prime or Advance<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
|}<br />
<br />
You can specify flow rate variables in your gcode; we do not do this by default, but take these values from the head itself. Any values you stipulate in your gcode will supersede the values stored on the head. With our recipes the slicing program generates gcode which dictates temperature and movement commands and indicates which moves should dispense material (a G1 move with an E value). <br />
<br />
However, we have two different ways to control flow. <br />
<br />
* If you use '''M229 E1 D1''' we will use the E values generated by the slicer ''for printing moves, but we will always use the prime/unprime settings on the head for advancing and retracting when transitioning between printing and non-printing moves.'' This allows for varying extrusion widths and layer thicknesses (on the same layer - as with support material). This is how just about all slicers and printers work.<br />
<br />
* If you do not use that command, we do not use that E value (except to distinguish printing from non-printing moves) we calculate for flow based purely on travel speed, declared layer thickness, and nozzle diameter. This is explained at http://hyrel3d.net/wiki/index.php/Flow_Rate<br />
<br />
When a head is loaded, it sends this flow data (how to calculate flow, as well as how much to prime and unprime (advance and retract) material when transitioning between printing and non-printing moves - and even how many primes or unprimes to do in conjunction with a tool change.<br />
<br />
In this way, the very same gcode (with temperature changes) can be used with any material, provided you are using the same physical parameters that the model was sliced for.<br />
<br />
<br><br />
<hr><br />
<br />
=== G10 UNUSED<sup>1</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== G11 UNUSED ===<br />
<br />
G11 is not recognized by Repetrel. <br />
<br />
On some other printers, this will do an advance or unretract; we do this via '''M722'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== M82 Absolute E-Values ===<br />
<br />
M82 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the original (0) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M82<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M82<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M82''' (use absolute E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M83 Relative E-Values ===<br />
<br />
M83 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the relative (last used) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M83<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M83<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M83''' (use relative E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M221 Set Flow Rate ===<br />
<br />
M221 sends information to the printer about material flow.<br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
Note, our default mode is volumetric calculations; if you need to slice with linear calculations, multiply your Pn by approximately 2.4 (you can do the math).<br />
<br />
'''Usage'''<br />
<br />
M221 Pn Sn Wn Zn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the number of pulses on the motor to dispense 1 μl of material;<br />
'''Sn''' is the direct flow multiplier (to allow for undersized or oversized stock;<br />
'''Wn''' is the width of the cross section of the volume to fill;<br />
'''Zn''' is the height (layer thickness) of the cross section of the volume to fill; and<br />
'''T#''' is the tool (head) to which these values will be applied.<br />
As always, any parameters not specified will be inherited from your environment.<br />
<br />
'''Example'''<br />
<br />
M221 S1.0 T# P77 W0.5 Z0.3<br />
G4 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M221''' (set flow rate) <br />
** '''S1.0''' (flow multiplier of 1.0) <br />
** '''T#''' (target head) <br />
** '''P77''' (77 pulses per microliter) <br />
** '''W0.5''' (0.5mm nozzle) <br />
** '''Z0.3''' (0.3mm layer thickness - note that your gcode '''M756''' will overwrite this value)<br />
* '''G4''' (timed pause)<br />
** '''P1''' (one millisecond)<br />
<br />
<br><br />
<hr><br />
<br />
=== M229 Use E Values ===<br />
<br />
'''Starting with version 4''', Hyrel will begin to enable the use of E-values in your gcode. Variable extrusion width and support/infill thickness slicers, rejoice! Note, calculations are done for every single move individually.<br />
<br />
'''Usage'''<br />
<br />
M229 En Dn Sn<br />
<br />
'''Parameters'''<br />
<br />
'''En''' can be 0 (native flow calculation) or 1 (use E values)<br />
'''Dn''' how directed to head; see below<br />
'''D0''' on head controller directly; constant flow, not adjusted for motion acceleration/deceleration<br />
'''D1''' on motion controller, sent to head via CANBUS and adjusted for motion acceleration/deceleration<br />
'''D2''' on motion controller, sent to head via C axis step pin and adjusted for motion acceleration/deceleration<br />
'''D3''' on motion controller, sent to head via CANBUS and C axis and adjusted for motion acceleration/deceleration<br />
'''Sn''' sets a threshold in seconds; isolated non-printing moves below this threshold will not trigger unprime/prime actions<br />
<br />
Note: E1 D0 is an illegal combination.<br />
<br />
'''Example 1'''<br />
<br />
M229 E1 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E1''' (enabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
''Above is the default way to enable E values.''<br />
<br />
'''Example 2'''<br />
<br />
M229 E0 D0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
<br />
''Above is the default way to ignore E values, and is how v3 and earlier releases work.''<br />
<br />
'''Example 3'''<br />
<br />
M229 E0 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
'''Example 4'''<br />
<br />
M229 E0 D0 S0.02<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning/Parallel Printing ===<br />
<br />
<span style="color: red;">'''NOTE: M703 DOES NOT WORK WITH M229 E1 D1. YOU MUST USE M229 E0 D0, and use our native flow calculations instead of E values'''<br />
<br />
Clone, slave, or parallel printing, is when one head makes a normal print, and another head makes the ''exact same print'' at the same time.<br />
<br />
We will normally execute a T command first, to establish the primary or master head (generally the one to the left). Then the M703 command, cloning or slaving another head to the first. <br />
<br />
Remember, this is how we address the tool positions; note that the 30M and ESR have four positions, not five. Counting from the leftmost position:<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ T Commands and T Variables for Standard Addresses<br />
|-<br />
! style="width: 15%;" | Command<br />
! style="width: 15%;" | <span style="color: red;">1st Slot</span><br />
! style="width: 15%;" | 2nd Slot<br />
! style="width: 15%;" | <span style="color: royalblue;">3rd Slot</span><br />
! style="width: 15%;" | 4th Slot<br />
! style="width: 15%;" | <span style="color: limegreen;">5th Slot</span><br />
|-<br />
! Tool Change<br />
| <span style="color: red;">'''T0'''</span><br />
| T1<br />
| T2<br />
| T3<br />
| T4<br />
|-<br />
! Clone Address<br />
| T11<br />
| T12<br />
| <span style="color: royalblue;">'''T13'''</span><br />
| T14<br />
| <span style="color: limegreen;">'''T15'''</span><br />
|-<br />
! Master Address<br />
| <span style="color: red;">'''S11'''</span><br />
| S12<br />
| S13<br />
| S14<br />
| S15<br />
|-<br />
|}<br />
<br />
In the following example we have a five-position yoke; commands executed by the head in <span style="color: red;">'''slot 1''' (far left)</span> will also be executed by the heads in both <span style="color: royalblue;">'''slot 3''' (third from left)</span> and <span style="color: limegreen;">'''slot 5''' (fifth from left)</span>:<br />
<br />
<span style="color: red;">T0</span><br />
M703 <span style="color: royalblue;">T13</span> <span style="color: red;">S11</span><br />
M703 <span style="color: limegreen;">T15</span> <span style="color: red;">S11</span><br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* <span style="color: red;">'''T0''' - Assign commands to Position 1 (the far left head on yoke 1)</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: royalblue;">'''T13''' - Tool Position 3 </span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: limegreen;">'''T15''' - Tool Position 5</span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
Note that only Hydra (16A) and High Resolution Engine (EHR) units have five tool positions; other models have four only. See '''Understanding the T''' at the top of '''[[Gcode|the Gcode page]]''' for tool position nomenclature.<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M721 Set Unprime Values ===<br />
<br />
M721 sends information to the printer about how much material to unprime (retract) when a transition from printing move to non-printing move is detected.<br />
<br />
'''Usage'''<br />
<br />
M721 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds prior to the end of the current printing move to begin the unprime (retract) action; a negative number initiates this before the end of the move<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M721 I1''' would execute an unprime with the previously specified values at that point in the gcode.<br />
<br />
'''Example 1'''<br />
<br />
M721 S10000 E100 P-15 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
<br />
'''Example 2'''<br />
<br />
M721 T# I1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
<br />
<br><br />
<hr><br />
<br />
=== M722 Set Prime Values ===<br />
<br />
M722 sends information to the printer about how much material to prime (advance) when a transition from non-printing move to printing move is detected. This is done primarily to compensate for an earlier unprime (retract), to prep the head to be ready to dispense.<br />
<br />
'''Usage'''<br />
<br />
M722 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds to dwell at the start of the next printing move to allow for the prime (advance) action<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M722 I1''' would execute a prime with the previously specified values at that point in the gcode.<br />
<br />
'''Example'''<br />
<br />
M722 S10000 E100 P-15 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (prime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
<br />
'''Example'''<br />
<br />
M722 T# I1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M722''' (prime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
<br />
<br><br />
<hr><br />
<br />
=== M723 Set Manual Flow ===<br />
<br />
M723 tells the designated extruder(s) to advance material for the specified number of pulses (on the motor) at the specified rate, regardless of any X/Y/Z movement. It is normally used only during manual operation, not during gcode execution. It can be used after moving to a location to dispense a set amount of material (like depositing material into reservoirs). We recommend adding a timed pause (G4) after the extrusion command if you want to extrude without moving.<br />
<br />
M723 is also used to activate and set speed on the stirring apparatus on the DMH dynamic mixing head.<br />
<br />
<br />
'''Usage'''<br />
<br />
M723 Sn En T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which the motor should advance, in pulses per second (default: 500);<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute (default of 65535 is essentially "forever");<br />
'''T#''' is the target head<br />
<br />
'''Example'''<br />
<br />
M723 S500 E50000 T#<br />
G4 S5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M723''' (start manual feed) <br />
** '''S500''' (at 500 pulses per second) <br />
** '''E50000''' (for 50000 pulses) <br />
** '''T#''' (target head)<br />
* '''G4''' (Timed pause) <br />
** '''S3''' (3 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M728 Set Motor Current Boost ===<br />
<br />
M728 will set the motor current boost; default is 0.<br />
<br />
'''Usage'''<br />
<br />
M728 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target head (or device)<br />
<br />
'''Example'''<br />
<br />
M728 T# S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M728''' (set motor current boost)<br />
** '''T#''' (target head)<br />
** '''S0''' (off)<br />
<br><br />
<hr><br />
<br />
=== M756 Set Height for Flow ===<br />
<br />
M756 will overwrite the Z value from the M221 command, allowing you to calculate flow for thinner or thicker layers. We declare M756 at the beginning of every layer; normally, they are all the same (unless you sliced for varying layer thicknesses). <br />
<br />
Note: this command is ignored if you are using '''M229 E1 D1''' to enable use of E values.<br />
<br />
Note: this does NOT change your Z position; see G0 or G1 for that.<br />
<br />
'''Usage'''<br />
<br />
M756 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the layer thickness in mm for flow calculations<br />
<br />
'''Example'''<br />
<br />
M756 S0.125<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M756''' (set layer height for flow calculations) <br />
** '''S0.125''' (at 0.125mm)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Position and Offsets''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Position and Offsets<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Set Offsets''<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_to_Physical_Home|G28]] <br />
| Yes || Send to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M702_-_M704_Cloning_Heads|M702-4]] <br />
| Yes || Cloning Heads<br />
|-<br />
|}<br />
<br />
<span style="color: red;">'''DRAGGING A GCODE RENDERING AROUND ON THE PRINT BED DOES NOTHING IN EARLIER VERSIONS!''' <br>Either positiong the stl properly before slicing, or reposition the gcode with a G54 offset - read below.</span>.<br />
<br />
The following commands define if new positioning data is defined in inches (G20) or mm (G21); or from the origin (G90) or from the present location (G91). They also stipulate the offsets from one head to another (M6), and how to invoke that offset (T).<br />
<br />
=== G10 UNUSED<sup>2</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
=== G20 Set Units to Inches ===<br />
<br />
G20 declares that henceforth, measurements will be given in inches.<br />
<br />
'''''Working with G20 is experimental and unsupported on Hyrel equipment. Use at your own risk.'''''<br />
<br />
'''Usage'''<br />
<br />
G20<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G20''' (set units to inches)<br />
<br />
<br><br />
<hr><br />
<br />
=== G21 Set Units to Millimeters ===<br />
<br />
G21 declares that henceforth, measurements will be given in mm.<br />
<br />
'''Usage'''<br />
<br />
G21<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G21<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G21''' (set units to milimeters)<br />
<br />
<br><br />
<hr><br />
<br />
=== G28 Send to Physical Home ===<br />
<br />
G28 sends the specified axes to the sensor-defined physical home position, regardless of logically set 0,0, then pop-off and re-acquire the sensor threshold at a slower rate. This pop-off and re-acquire was implemented during v3.<br />
<br />
After homing, a '''G28''' also resets current offsets to 0 - including any may have been set with a '''G92''' or an H (as defined in an '''M660''' and invoked on a '''G1'''), performs a '''G53''', and applies a head offset of 0 mm (as in an '''M6 O0''').<br />
<br />
Any axis not homed will have its position remain unchanged. We do not support intermediate positioning during homing.<br />
<br />
'''Usage'''<br />
<br />
G28 Xn Yn Zn An Bn I1<br />
<br />
'''Parameters'''<br />
<br />
'''X0''' ensures that the X axis is homed<br />
'''Y0''' ensures that the Y axis is homed<br />
'''Z0''' ensures that the Z axis is homed<br />
'''A0''' ensures that the A axis is homed<br />
'''B0''' ensures that the B axis is homed<br />
<br />
'''Example'''<br />
<br />
G28 X0 Y0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G28''' (home axis)<br />
** '''X0''' (X axis to 0)<br />
** '''Y0''' (Y axis to 0)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== G53 Clear Offsets ===<br />
<br />
G53 sets the fixture offsets to (0,0,0,0,0). This takes no arguments or variables. It does not clear stored offset values.<br />
<br />
'''Usage'''<br />
<br />
G53<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G53<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G53''' (set fixture offsets to 0; no effect on H (head) offsets)<br />
<br />
<br><br />
<hr><br />
<br />
=== G54 - G59 - Set Offsets ===<br />
<br />
G54, G55, G56, G57, G58, and G59 will each store and invoke fixture offsets in the X, Y, Z, A, and/or B axes for all subsequent moves. Any values not invoked will remain with their previous value (0 unless earlier specified otherwise). These offsets apply to all positioning until a new offset is applied, or a '''G53''' is used to clear all offsets.<br />
<br />
This graphic shows how printers (OTHER THAN THE EHR) use the G54-G59 offsets:<br />
<br />
[[File:G54.png|600px]]<br />
<br />
Note that this differs from an '''M6''', where the offsets are only applied to a SINGLE tool position. These offsets are cumulative with '''M6''' values.<br />
<br />
'''Usage'''<br />
<br />
G54 (... G59) Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the offset in mm in the X axis<br />
'''Yn''' is the offset in mm in the Y axis<br />
'''Zn''' is the offset in mm in the Z axis<br />
'''An''' is the offset in mm in the A axis<br />
'''Bn''' is the offset in mm in the B axis<br />
<br />
'''Example'''<br />
<br />
G54 X30 Y-20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G54''' (set units to milimeters)<br />
** '''X30''' (add 30mm to all X positions)<br />
** '''Y-20''' (subtract 20mm from all Y positions)<br />
** (no change to prior stored offsets)<br />
<br />
'''Example'''<br />
<br />
G55<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G55''' (apply new fixture offsets)<br />
** (no variable: use previous G55 values, or as stored under Settings > Printer > Fixture Offsets)<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G90 Absolute Positioning ===<br />
<br />
G90 stipulates that henceforth, the positioning will be calculated from the origin (0,0 point).<br />
<br />
'''Usage'''<br />
<br />
G90<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G90<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G90''' (use absolute positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G91 Relatative Positioning ===<br />
<br />
G91 stipulates that henceforth, the positioning will be calculated relative to the starting position.<br />
<br />
'''Usage'''<br />
<br />
G91<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G91<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (use relative positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G92 Reset Coordinate Offsets ===<br />
<br />
G92 resets the current position to the specified coordinates for all axes enumerated. <br />
<br />
'''Usage'''<br />
<br />
G92 Xn Yn Zn An Bn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new value for the current X position<br />
'''Yn''' is the new value for the current Y position<br />
'''Zn''' is the new value for the current Z position<br />
'''An''' is the new value for the current A position<br />
'''Bn''' is the new value for the current B position<br />
'''En''' is the new value for the current E position<br />
<br />
'''Example'''<br />
<br />
G92 X0 Y50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''X0''' (present X position is 0)<br />
** '''Y50''' (present Y position is 50)<br />
<br />
'''Example'''<br />
<br />
G92 E0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''E0''' (present E position is 0)<br />
<br />
<br><br />
<hr><br />
<br />
=== G93 Clear Coordinate Offsets ===<br />
<br />
G93 clears ALL offsets implemented via '''G92''' command.<br />
<br />
'''Usage'''<br />
<br />
G93<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G93<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G93''' (clear coordinate offset values, all axes)<br />
<br />
<br><br />
<hr><br />
<br />
=== M6 Declare Head Offsets ===<br />
<br />
M6 declares that a particular head holds a set of X, Y, and/or Z offsets, which will be invoked during a T (tool change) command. Repetrel automatically reads this data from the information stored on the heads, and sends it to the printer before the gcode file is loaded.<br />
<br />
'''Usage'''<br />
<br />
M6 T# On Xn Yn Zn An Bn Dn In Kn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the Tool position for which these offsets are being set<br />
'''On''' is the Offset position where these are being stored<br />
'''Xn''' is the offset in the X axis<br />
'''Yn''' is the offset in the Y axis<br />
'''Zn''' is the offset in the Z axis<br />
'''An''' is the offset in the A axis<br />
'''Bn''' is the offset in the B axis<br />
'''Dn''' is the current tool diameter (used with pocket commands)<br />
'''In''' non-persistent; can be default 0 (store values but do not move these distances) or 1 (store values and move these distances)<br />
'''Kn''' persistent setting; can be default 0 (use I value) or 1 (ignore I1 and always act with I0)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40<br />
<br />
This happens (for every head loaded) when you click print, and the head values are sent to the Motion Controller.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** (no move)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40 I1<br />
<br />
This happens when you execute a tool change with '''T#''', and so it triggers the move ('''I1''') to properly position the next head.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** '''I1''' (store and move distances)<br />
<br />
'''Example'''<br />
<br />
M6 K1<br />
<br />
You might include this in your header to change behavior during tool changes.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** (all future T# or M6 commands) <br />
** (no offset registers, so ignore all offsets)<br />
** '''K1''' (always force I0 with M6 unless K0 present (or has been previously set)<br />
<br />
Note that this differs from a G54-G59, where the offsets are applied to EVERY tool position.<br />
<br />
<br><br />
<hr><br />
<br />
=== M660 Assign Tool Height Offset ===<br />
<br />
Used with the High Resolution Engine (and other units which home away from O, like a CNC), an M660 declares that a particular head, when called upon, should print at the gcode-based Z position MODIFIED by this offset, since on these units, the Z-Zero is often BELOW the print surface. By default, this is ONLY used on the EHR (Engine, High Resolution)<br />
<br />
NOTE: You MUST have a '''G28 Z0''' in your header to run this M660 on the EHR.<br />
<br />
'''Usage'''<br />
<br />
M660 Hn Zn<br />
(followed by)<br />
G1 Xn Yn Zn Fn Hn (see '''[[#G1_Working_Move]]''' for other details<br />
<br />
'''Parameters'''<br />
<br />
'''H''' is the head offset register for which these offsets are being set;<br />
'''Z''' is the offset in the Z axis in mm.<br />
<br />
'''Example 1'''<br />
<br />
M660 H2 Z28.2 ; (specified before any moves)<br />
(followed by)<br />
G1 X50 Y75 F4800 H2 ; (specified on the first G1 move)<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M660''' (apply offset) <br />
** '''H2''' (store in register 2)<br />
** '''Z28.2''' (+28.2 to Z position)<br />
* (there may be more commands before the G1 move invoking the H2)<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in Z)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoke offsets stored in register H2)<br />
<br />
To be clear, this requires editing two lines of code:<br />
<br />
In your gcode, you will enter the M660 just before the first layer code. Example: <code>M660 H2 Z28.2 ; set tool height for tool two (Z offset)</code>. On the first move of layer one (usually the Z move), you will add an <code>H</code> value so that this tool height is invoked. <br />
<br />
'''Example 2'''<br />
<br />
Before editing: <br />
<br />
G1 Z0.275 F360 ; move to next layer (0)<br />
(followed by)<br />
G1 X50 Y75 F4800<br />
<br />
After editing:<br />
<br />
G1 Z0.275 F360 '''H2''' ; move to next layer (0) and invoke head Z offset for this tool</code><br />
(followed by)<br />
G1 X50 Y75 F4800 '''H2'''<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning Heads ===<br />
<br />
Clone, slave, or parallel printing, is when multiple heads make the ''exact same print'' at the same time.<br />
<br />
Usage of these commands with version 4 and earlier is explained in detail at '''https://hyrel3d.com/wiki/index.php/Cloning_and_Mixing'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== T Tool Change===<br />
<br />
T executes a tool change, invoking the parameters specified in the M6 sent from Repetrel to the printer at the job start. Do not confuse a T command with a T variable.<br />
<br />
'''See the first entry on this page for details. '''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Lasers and UV Pens''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Lasers and UV Pens<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|--<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
| colspan="3" | [[#Laser_Examples|Laser Examples]]<br />
|-<br />
| colspan="3" | [[#UV_Pen_Examples|UV Pen Examples]]<br />
|}<br />
<br />
<br />
The CO<sub>2</sub> and Diode Lasers and the UV Pens require the following enabling codes:<br />
<br />
=== M620 Enable Device ===<br />
<br />
M620 enables the device.<br />
<br />
'''Usage'''<br />
<br />
M620 T# En An<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool position<br />
'''En''' can be the default 0 (disable) or 1 (enable)<br />
'''An''' is the duration in seconds after shut-off that the cooling remains active; default is 30 (but this will not override temperature safety measures)<br />
<br />
'''Example'''<br />
<br />
M620 T# E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M620''' (enable device) <br />
** '''T#''' (target head - MUST be specified, can NOT be inherited)<br />
** '''E1''' (enable)<br />
<br />
<br><br />
<hr><br />
<br />
=== M621 Set Laser Power ===<br />
<br />
M621 sets the power for the LASER (not other heads).<br />
<br />
'''Usage'''<br />
<br />
M621 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
'''Dn''' is the initial power (similar to a prime) to penetrate material (optional; uses Pn if unspecified)<br />
<br />
Note: No tool is specified; this will happen on the laser already enabled with M620.<br />
<br />
'''Example'''<br />
<br />
M621 P40<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M621''' (activate device) <br />
** '''P40''' (at 40% during "printing" (E-value) moves)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
=== M623 Duration Emit ===<br />
<br />
M623 sets the power for the laser or UV pen, and takes the following parameters:<br />
<br />
'''Usage'''<br />
<br />
M623 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Dn''' is the duration, in miliseconds (only used for static exposures, not during moves)<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
<br />
Note: Dn max for UV pens is 60,000 (1 minute); Dn max for other devices 1,000 (1 second); <br />
<br />
Here are examples:<br />
<br />
M623 P80 D500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D500''' (duration 500 miliseconds)<br />
<br />
M623 P80 D10000 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D10000''' (duration 10 seconds)<br />
<br />
=== Emitting Move Example for the Laser ===<br />
<br />
A sample of code for lasering will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device <br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your lasering job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
=== Emitting Move Example for the UV Pen ===<br />
<br />
A sample of code for UV Curing will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device<br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your curing job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
For more complex examples, see the '''[[UV_and_Clench]]''' page.<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Spindles and Lathes''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Spindles and Lathes<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| G81 || Peck Drilling<br />
|-<br />
|}<br />
<br />
Machining and Spindle Tool commands. Note, we recommend using [http://mr-soft.net/ SimplyCAM].<br />
<br />
You can review the 5-axis gcode we used for [https://www.youtube.com/watch?v=B0lvN-aPYHI this video] from [http://hyrel3d.net/downloads/gcode/Ardes_tube_cap_milling.gcode here].<br />
<br />
=== M3 Turn On Spindle (CW) ===<br />
<br />
M3 tells the printer to activate (start) the spindle motor in the clockwise direction on the current head (if it has one), using the value set on the head for RPM. Note: S0 is the same as turning it off. Note: DO NOT CHANGE DIRECTION while the spindle is in motion.<br />
<br />
'''Usage'''<br />
<br />
M3 T# Sn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Sn''' - power (0-100%)<br />
'''Fn''' - optional; PWM in Hz (defaults on heads should be fine for most uses)<br />
<br />
'''Example'''<br />
<br />
M3 T# S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (activate spindle clockwise)<br />
** '''T#''' (target head)<br />
** '''S75''' (at 75% power) <br />
** (default PWM)<br />
<br />
<br><br />
<hr><br />
<br />
=== M4 Turn On Spindle (CCW) ===<br />
<br />
Please refer to M3, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M5 Turn Off Spindle ===<br />
<br />
M5 tells the printer to deactivate (stop) the spindle motor on the current head (if it has one). M5 has the same effect as M3 S0 or M4 S0.<br />
<br />
'''Usage'''<br />
<br />
M5 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
<br />
'''Example'''<br />
<br />
M5 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (deactivate spindle )<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M253 Turn On Lathe (CW) ===<br />
<br />
M253 tells the printer to activate (start) the lathe motor in the clockwise direction (if it has one), using the value set with M92 for RPM. Only available on Hydra 16A models.<br />
<br />
Note: S0 is the same as turning it off. <br />
<br />
'''Usage'''<br />
<br />
M253 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' - speed in units per minute (default: RPM if set with M92 as steps per revolution)<br />
<br />
'''Example'''<br />
<br />
M253 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M253''' (activate spindle clockwise)<br />
** '''S75''' (at 75 RPM) <br />
<br />
<br><br />
<hr><br />
<br />
=== M254 Turn On Lathe (CCW) ===<br />
<br />
Please refer to M253, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M255 Turn Off Lathe ===<br />
<br />
M255 tells the printer to deactivate (stop) the lathe motor (if it has one). M255 has the same effect as G253 S0 or G254 S0.<br />
<br />
'''Usage'''<br />
<br />
M255 <br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M255 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M255''' (deactivate lathe)<br />
<br />
<br><br />
<hr><br />
<br />
=== G81 Peck Drilling ===<br />
<br />
G81 tells the printer to move to a start position in X/Y and then in Z, and to make (if needed) repeated descents and retracts. This is used to make holes, especially deep holes. Note that the spindle tool is turned on with an M3 or M4 before this command, and turned off with an M5 after all work is done.<br />
<br />
'''Usage'''<br />
<br />
G81 T# Xn Yn In Pn Qn Zn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Xn''' - X position<br />
'''Yn''' - Y position<br />
'''In''' - initial Z position<br />
'''Pn''' - peck downward this many mm during each cycle<br />
'''Qn''' - retract upward this many mm after each cycle (to clear debris)<br />
'''Zn''' - maximum pecking depth<br />
'''Fn''' - Z working speed in mm/min<br />
<br />
'''Example'''<br />
<br />
G81 T# X100 Y75 I3 P3 Q-2 Z-7.5 F200<br />
<br />
''NOTE that an M660 offset must be set and applied BEFORE THIS COMMAND to allow for tool length.''<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G81''' (begin pecking cycle) <br />
** '''X100 Y75''' (move to X/Y starting position X100 Y75) <br />
** '''I3''' (move to Z starting position Z3, which will be our greatest retract height) <br />
** '''P3''' (peck downward an additional 3mm at a time)<br />
** '''Q-2''' (retract upward 2mm after each peck (to clear debris))<br />
** '''Z-7.5''' (peck to a maximum depth of 7.5mm)<br />
** '''F200''' (working (drilling) travel speed of 200 mm/min)<br />
** ''after this, the head will retract up to the I position (Z3 in this case) before moving on to the next line''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Reporting and Diagnostics''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Reporting and Diagnostics<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M670_M670_Enable_Gantry_/_Y-arm_Light|M670]] <br />
| Yes || Enable Y-arm Light<br />
|- || Activate Danger Light<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
|}<br />
<br />
The following commands help with reporting and diagnostics. Most users never need them, but here are the basics. More advanced/detailed reporting is available.<br />
<br />
=== M701 Set Head Reporting ===<br />
<br />
M701 tells heads how often to send head-specific information to the Motion Controller and on to Repetrel (and pass along to a text file if enabled via M719).<br />
<br />
'''Usage'''<br />
<br />
M701 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Pn''' - period in seconds between entries (default 1)<br />
<br />
'''Example'''<br />
<br />
M701 P12<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M701''' (head reporting) <br />
** (currently active head)<br />
** '''P12''' (every 12 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M718 Stop Logging to File ===<br />
<br />
M718 tells Repetrel to stop any logging of data to text file that may have been enabled with M719.<br />
<br />
'''Usage'''<br />
<br />
M718<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M718<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M718''' (logging off) <br />
<br />
<br><br />
<hr><br />
<br />
=== M719 Start Logging to File ===<br />
<br />
M719 tells the Motion Controller what system-wide information to report back to Repetrel, and also tells Repetrel to begin logging these details to a text file.<br />
<br />
'''Usage'''<br />
<br />
M719 Pn Sn <br />
<br />
M719 Pn Xn Yn Zn An Bn Vn En Ln<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' - period in seconds between entries<br />
'''Sn''' - can be default 0 (see options below) or 1 (report ALL data) <br />
'''Xn''' - report X position with each entry<br />
'''Yn''' - report Y position with each entry<br />
'''Zn''' - report Z position with each entry<br />
'''An''' - report A position with each entry<br />
'''Bn''' - report B position with each entry<br />
'''Vn''' - report velocity with each entry<br />
'''En''' - report flow rate with each entry<br />
'''Ln''' - report gcode line number with each entry<br />
<br />
Note: these values are persistent, and if previously enabled, will still be enabled unless disabled with a 0 parameter.<br />
<br />
'''Example 1'''<br />
<br />
M719 P10 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M719''' (logging on)<br />
** '''P10''' (every 10 seconds)<br />
** '''S1''' (report everything)<br />
<br />
'''Example 2'''<br />
<br />
M719 P.1 Xn Yn Zn Ln<br />
<br />
* '''M719''' (logging on)<br />
** '''P.1''' (every 0.1 seconds)<br />
** '''X1''' (report X position)<br />
** '''Y1''' (report Y position)<br />
** '''Z1''' (report Z position)<br />
** (don't report A position)<br />
** (don't report B position)<br />
** (don't report velocity)<br />
** (don't report flow rate)<br />
** '''L1''' (report line number)<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Enable Gantry / Y-arm Light ===<br />
<br />
M670 sets the intensity of the Y-arm LEDs.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the (percent of duty cycle, 0-100) for the LEDs<br />
'''Pn''' is the period (on-off interval - default is 1 second)<br />
<br />
'''Example 1'''<br />
<br />
M670 S50 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S50''' (50% duty cycle)<br />
** '''P1''' (1 second cycle)<br />
<br />
This would turn the Y-arm light on for 50% of 1 second, then off for 50% of 1 second - or on for 0.5 seconds, off for 0.5 seconds.<br />
<br />
'''Example 2'''<br />
<br />
M670 S25 P4<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S25''' (25% duty cycle)<br />
** '''P4''' (4 second cycle)<br />
<br />
This would turn the Y-arm light on for 25% of 4 second, then off for 75% of 4 seconds - or on for 1 second, off for 3 seconds.<br />
<br />
<br><br />
<hr><br />
<br />
=== M672 Set Gantry / Y-arm State ===<br />
<br />
M672 can be used to have the Gantry / Y-arm light change states to reflect the state of a sensor. For example, you can have it come on when the X axis is homed, or when the Y axis has a fault.<br />
<br />
'''Usage'''<br />
<br />
M672 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' can be (unlisted numbers are unused at present):<br />
'''0''' : Normal on/off<br />
'''10''' : X Home<br />
'''11''' : X Limit1<br />
'''12''' : X Limit2<br />
'''13''' : X Fault<br />
'''20''' : Y Home<br />
'''21''' : Y Limit1<br />
'''22''' : Y Limit2<br />
'''23''' : Y Fault<br />
'''30''' : Z Home<br />
'''31''' : Z Limit1<br />
'''32''' : Z Limit2<br />
'''33''' : Z Fault<br />
'''40''' : A Home<br />
'''41''' : A Limit1<br />
'''42''' : A Limit2<br />
'''43''' : A Fault<br />
'''50''' : B Home<br />
'''11''' : B Limit1<br />
'''52''' : B Limit2<br />
'''53''' : B Fault<br />
'''60''' : C Home<br />
'''61''' : C Limit1<br />
'''62''' : C Limit2<br />
'''63''' : C Fault<br />
<br />
'''Example'''<br />
<br />
M672 S<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M672''' (map Y-arm light to state of sensor)<br />
<br />
<br><br />
<hr><br />
<br />
=== M772 Reset All Metrics ===<br />
<br />
M772 will reset all internal gathering registers to '''0'''.<br />
<br />
'''Usage'''<br />
<br />
M772 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' 0 is default; S can be...<br />
'''0''' reset all values only<br />
'''1''' also generates a basic printing report<br />
'''255''' also generates all possible reports (helpful for advanced debugging)<br />
<br />
'''Example'''<br />
<br />
M772 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M772''' (reset all metrics)<br />
** '''S1''' (and generate basic printing report<br />
<br />
<br><br />
<hr><br />
<br />
=== M773 Generate Basic Report ===<br />
<br />
M773 generates a basic report of printing statistics (including average speed, number of primes, etc.)<br />
<br />
Note: this report will be more meaningful if you use '''M772''' to reset these counters at the start of a job.<br />
<br />
'''Usage'''<br />
<br />
M773<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M773<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M773''' (generate basic report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M773 - print job metrics Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Time (s) Dist (m)<br />
>IN: 50: -------- --------<br />
>IN: 50: Totals: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Printing moves: 0.0 0.000<br />
>IN: 50: Non-printing moves 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Accelerating: 0.0 0.000<br />
>IN: 50: Cruising: 0.0 0.000<br />
>IN: 50: Decelerating: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: can e steps issued: 0<br />
>IN: 50: approx filament (PI*d) 0.000 m<br />
>IN: 50: approx filament (PIr^2) 0.000 m<br />
>IN: 50: unprimes issued: 0<br />
>IN: 50: primes issued: 0<br />
>IN: 50: unprime-primes avoided: 0<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M773 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Aux Devices''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Aux Devices<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
|}<br />
<br />
<br />
Individual port control commands.<br />
<br />
=== M7 Activate Aux 1 ===<br />
<br />
[[File:M7m8m9_ehr.jpg|thumb|12VDC Ports on EHR|right]]<br />
<br />
[[File:M7m8m9_30m_esr.jpg|thumb|12VDC Ports on 30M, ESR|right]]<br />
<br />
M7 sends 12VDC to the port associated with "Mist Coolant", which we sometimes call Aux1. With no parameters, it is read as M7 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M7 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 1 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 1 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M7 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M7 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M7 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S0''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M7 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M8 Activate Aux 2 ===<br />
<br />
M7 sends 12VDC to the port associated with "Flood Coolant", which we sometimes call Aux2. With no parameters, it is read as M8 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M8 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 2 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 2 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M8 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M8 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M8 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M8 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M9 Deactivate Aux1 & Aux2 ===<br />
<br />
M9 cuts power to both Aux1 and Aux2. It is equivalent to running M7 S0 and M8 S0.<br />
<br />
'''Usage'''<br />
<br />
M9<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M9<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M9''' (set Aux 1 and Aux 2 to value 0 (off)) <br />
<br />
<br><br />
<hr><br />
<br />
=== M620 Activate Emitter ===<br />
<br />
See [[#M620_Enable_Device]] above.<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Activate Y-Arm (Gantry) Lights ===<br />
<br />
M670 sends 12VDC to the port associated turning on the Gantry (16A) or Y-arm (30M, ESR) lights.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M670 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M670 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M670 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M671 Activate X-Arm (Danger) Lights ===<br />
<br />
M671 sends 12VDC to the port associated turning on the X-arm / Danger lights (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M671 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M671 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M671 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M675 Activate Response LEDs ===<br />
<br />
M675 sends 12VDC to the port associated turning on the Response LEDs (30M/16A only).<br />
<br />
'''Usage'''<br />
<br />
M675 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M675 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M675 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M675 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M676 Activate Recirc. Fan ===<br />
<br />
M676 sends 12VDC to the port associated turning on the Recirc. Fan (16A only).<br />
<br />
'''Usage'''<br />
<br />
M676 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M676 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M676 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M676 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M677 Activate Buzzer ===<br />
<br />
M677 sends 12VDC to the port associated turning on the Buzzer (older 30Ms only).<br />
<br />
'''Usage'''<br />
<br />
M677 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M677 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M677 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M677 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M678 Activate Laser X-hair ===<br />
<br />
M678 sends 12VDC to the port associated turning on the Laser X-hair (16A with CO<sub>2</sub> lasers only).<br />
<br />
'''Usage'''<br />
<br />
M678 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M678 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M678 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M678 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
<br><br />
<hr><br />
<br />
=== M679 Activate Vacuum ===<br />
<br />
M679 sends 12VDC to the port associated turning on the Vacuum (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M679 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M679 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M679 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M684 Activate Exhaust ===<br />
<br />
M671 sends 12VDC to the port associated turning on the Exhaust (16A only).<br />
<br />
'''Usage'''<br />
<br />
M684 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M684 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M684 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M684 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M685 Set Power on Air ===<br />
<br />
M685 sends 12VDC to the port associated turning on the (positive pressure) Air (16A only).<br />
<br />
'''Usage'''<br />
<br />
M685 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M685 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M685 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' Air value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M685 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M689 Activate Ext. Head ===<br />
<br />
M689 sends 12VDC to the port associated turning on the Ext. Head.<br />
<br />
'''Usage'''<br />
<br />
M689 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M689 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M689 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M689 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M783 Tie Aux to Extrusion ===<br />
<br />
M783 can tie some auxiliary port (like Aux 1, normally controlled by M7, or Aux 2, normally controlled by M8, etc.) to be powered (at 100%) during a certain head's extrusion. Some users use this so that they can print with Ultimus or Viscotec heads on our equipment. See also [[#M7_Set_Power_On_Aux_1|M7]] and [[#M8_Set_Power_On_Aux_2|M8]].<br />
<br />
Note: M619 can be used to map which port M783 ties to - contact us for more information.<br />
<br />
'''Usage'''<br />
<br />
M783 T# <br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool to which the designated aux port will be tied<br />
<br />
'''Example'''<br />
<br />
M783 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M783''' (Tie current Aux port to status of head)<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Other Commands''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Other Commands<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
Other commands.<br />
<br />
=== M17 Engage Motors ===<br />
<br />
M17 will apply power to all motors (positioning and extruder motors), locking them at their current postion; this prevents the bed and yoke from being pushed manually in the X and Y. <br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M17''' (engage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M18 Disengage Motors ===<br />
<br />
M18 will cut power to all motors (positioning and extruder motors), unlocking them; this allows the motors to cool down (as they normally lock in place while still), as well as allowing one to manually push the bed and yoke in the X and Y. It also notifies the GUI that motors are disabled. All axes with homes must be rehomed after an M18.<br />
<br />
Note this is identical to '''M84''' and the opposite of '''M17'''.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M18''' (disengage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M30 End of Program ===<br />
<br />
M30 tells the printer that this job is complete. No gocde after an M30 will be executed as part of the previous job.<br />
<br />
Note M30 also dissolves any cloning setups, changes head index to 0, clears fixture offsets (G53), clears any M229 E-value settings, resets M106 persistent range, resets any printing errors, resets M660 head offsets to 0, resets heads to their stored values, and triggers any queued reports.<br />
<br />
'''Usage'''<br />
<br />
M30<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M30<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M30''' (end or program) <br />
<br />
<br><br />
<hr><br />
<br />
=== M84 Disable Motors ===<br />
<br />
M84 invokes an M18. Please see M18 for usage.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
<br><br />
<hr><br />
<br />
=== M790 New Layer Actions ===<br />
<br />
M790 will trigger any associated new layer actions, which can include capturing an image from the designated camera. It takes no parameters.<br />
<br />
=== M791 Snap Image ===<br />
<br />
M791 will cause the camera selected under the Interface > Camera1 tab, if set to live video, to capture an image and save it to <code>C:\Users\hyrel\Pictures\HyrelPrinterPictures\Camera1</code>, named <code>pic#.png</code><br />
<br />
=== M792 Execute Action ===<br />
<br />
M792 causes Repetrel to perform an action, such as displaying an image or making a warning beep.<br />
<br />
'''Usage'''<br />
<br />
M792 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M792 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M792''' (execute action) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== Gcode Header ==<br />
<br />
Here are some sample headers for Gcode on our equipment:<br />
<br />
=== 16A, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
M190 S100 ; bed preheat : set and wait<br />
M140 S[bed_temperature] ; bed temp : set, no wait<br />
M104 T12 S[temperature] ; head temp : set, no wait<br />
<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M190 S[bed_temperature] ; bed temp : set and wait<br />
M109 T12 S[temperature] ; head temp : set and wait<br />
<br />
T1 ; use SECOND tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 ///////////////</code><br />
<br />
=== 30M and ESR, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
G28 Z0 ; home, goto : Z (ignored if no Z home)<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
;M190 S[bed_temperature] ; bed temp : set and wait <= COMMENTED OUT<br />
;M109 T11 S[temperature] ; head temp : set and wait <= COMMENTED OUT<br />
<br />
T0 ; use FIRST tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 ///////////////<br />
<br />
== Gcode Footer ==<br />
<br />
=== Standard, All Models ===<br />
<br />
Below is our standard Gcode footer, which should be at the end of all your gcode files:<br />
<br />
; /////////////// BEGIN HYREL STANDARD FOOTER - 2021.02.12 \\\\\\\\\\\\\\\<br />
<br />
; temp control:<br />
<br />
<br />
M107 T100 ; fans, diodes : off<br />
M620 T100 E0 ; CO2 lasers ; off<br />
M104 T100 S0 ; head temps : off<br />
M140 T90 S0 ; bed temps : off<br />
M5 ; spindles : off<br />
<br />
; housekeeping<br />
<br />
G91 ; coordinates : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
G0 Y0 ; home, goto : Y axis<br />
G0 X0 ; home, goto : X axis<br />
M84 ; motors : disable<br />
G53 ; clear offsets<br />
M30 ; program : end<br />
<br />
; \\\\\\\\\\\\\\\ END HYREL STANDARD FOOTER - 2021.02.12 ///////////////</div>Davohttps://hyrel3d.com/wiki/index.php?title=Gcode&diff=7762Gcode2024-03-06T14:24:25Z<p>Davo: /* G4 Timed Pause */</p>
<hr />
<div><br />
<br />
__NOTOC__<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! Main Sections<br />
|-<br />
| [[#What_is_GCode.3F | What is GCode?]]<br />
|-<br />
| [[#Understanding_the_T | Understanding the T]]<br />
|-<br />
| [[#Most_Commonly_Edited_Gcodes | Most Commonly Edited GCodes]]<br />
|-<br />
| [[#Controlling_Movement | Controlling Movement]]<br />
|-<br />
| [[#Controlling_Temperature | Controlling Temperature]]<br />
|-<br />
| [[#Controlling_Material_Flow | Controlling Material Flow]]<br />
|-<br />
| [[#Controlling_Position_and_Offsets | Controlling Position and Offsets]]<br />
|-<br />
| [[#Controlling_Lasers_and_UV_Pens | Controlling Lasers and UV Pens]]<br />
|-<br />
| [[#Controlling_Spindles_and_Lathes | Controlling Spindles and Lathes]]<br />
|-<br />
| [[#Reporting_and_Diagnostics | Reporting and Diagnostics]]<br />
|-<br />
| [[#Controlling_Aux_Devices | Controlling Aux Devices]]<br />
|-<br />
| [[#Other_Commands| Other Commands]]<br />
|-<br />
| [[#Gcode_Header| Gcode Headers]]<br />
|-<br />
| [[#Gcode_Footer| Gcode Footer]]<br />
|-<br />
|}<br />
<br />
Note: Codes in Black are supported on version 4 and above (v4+), and most likely on version 3 as well.<br />
<br />
<span style="color:darkorange;">Note: Codes in Orange are supported on version 5 and above (v5+) only.<br />
<br />
Note that Repetrel versions prior to 4.2 can not properly process gcode with "tab" characters - tab was a reserved character.<br />
<br />
== What is GCode? ==<br />
<br />
'''Everything your Hyrel 3D Printer does is done by executing GCode''', whether you are aware of it or not. <br />
<br />
Every button you press on the screen sends a gcode to the printer.<br />
<br />
When you start a job (by pressing "Print"), the settings from your head are sent to the printer (including flow and prime/unprime values); then the gcode file is sent, line by line, to the printer.<br />
<br />
All parameters are persistent, so once they are set, they will remain in place unless or until you (or the file) sends a new, updated value (including setting to 0).<br />
<br />
Please note that there are many flavors of gcode, and while most have the same (or very similar) G0-G100 and M0-M100, codes above 100 are largely nonstandard.<br />
<br />
''It is important to remember that different variable letters can have different meanings, depending on the G- or M- code being used'' - '''''especially the T value.'''''<br />
<br />
The Table of Contents to the right lists the main categories of Gcodes.<br />
<br />
Below is a table listing them in numerical order (click '''Expand''' to expand):<br />
<br />
{| border="1" class="wikitable mw-collapsible mw-collapsed"<br />
|+ Code_Chart<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_X,_Y_to_Physical_Home|G28]] <br />
| Yes || Send X, Y to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| Yes || Peck Drilling<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#M619_Map_Aux_Port|M619]] <br />
| Yes || Map Aux Port<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Set Unprime Values<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Set Prime Values<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
=== '''Header Explained''' ===<br />
<br />
Please visit [[GCode Header]] for a detailed description of our standard GCode headers.<br />
<br />
== '''Understanding the T''' ==<br />
<br />
A '''T Command''' changes which head has the focus of the motion controller and is executing the gcode. Each of our printers have at least four tool positions.<br />
<br />
The use of T commands and variables changes greatly (for the better) with the jump to version 5 from the previous versions.<br />
<br />
Please see '''[[T_v4]]''' for CURRENT (v4 and earlier) use, where the nomenclature for '''T Commands''' and the '''T Variables''' are not the same.<br />
<br />
We will use a '''T#''' in the descriptions below to avoid confusion; please find the correct designation for your version by following the links above.<br />
<br />
== '''Most Commonly Edited Gcodes''' ==<br />
<br />
Below are the gcodes users should first become familiar with. <br />
<br />
=== Tool Changes ===<br />
<br />
'''T0''' tells the printer to perform extrusion (or emission) from the tool in the far left position<br><br />
'''T1''' tells the printer to perform extrusion (or emission) from the tool in the second-from-left position<br><br />
'''T2''' tells the printer to perform extrusion (or emission) from the tool in the third-from-left position<br><br />
'''T3''' tells the printer to perform extrusion (or emission) from the tool in the fourth-from-left position<br><br />
'''T4''' tells the printer to perform extrusion (or emission) from the tool in the fifth-from-left position (if available)<br />
<br />
=== Movement ===<br />
<br />
'''G0''' for "rapid", non-printing moves<br><br />
'''G1''' for "working speed" moves, which may be printing (with E value) or non-printing (no E value)<br />
<br />
=== Temperature ===<br />
<br />
'''M104''' to set head temp<br><br />
'''M109''' to set and wait for head temp<br><br />
'''M140''' to set bed temp<br><br />
'''M190''' to set and wait for bed temp<br />
<br />
=== Others ===<br />
<br />
Which commands to learn from here will depend on what the user intends to do with the equipment.<br />
<br />
== '''Controlling Movement''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Movement<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G0_Rapid_Move|G0]] <br />
| Yes || Rapid Move<br />
|-<br />
! [[#G1_Working_Move|G1]]<br />
| Yes || Working Move<br />
|-<br />
! [[#G2_Clockwise_Arc|G2]] <br />
| Yes || Clockwise Arc<br />
|-<br />
! [[#G2.1_Spiral_CW_Arc1|G2.1]] <br />
| Yes || Spiral CW Arc<sup>1</sup><br />
|-<br />
! [[#G2.2_Spiral_CW_Arc2|G2.2]] <br />
| Yes || Spiral CW Arc<sup>2</sup><br />
|-<br />
! [[#G2.3_3-Space_CW_Arc|G2.3]] <br />
| Yes || 3-Space CW Spiral Arc<br />
|-<br />
! [[#G3_Counterclockwise_Arc|G3]] <br />
| Yes || Counterclockwise Arc<br />
|-<br />
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]] <br />
| Yes || Spiral CCW Arc<sup>1</sup><br />
|-<br />
! [[#G3.2_Spiral_CCW_Arc2|G3.2]] <br />
| Yes || Spiral CCW Arc<sup>2</sup><br />
|-<br />
! [[#G3.3_3-Space_CCW_Arc|G3.3]] <br />
| Yes || 3-Space CCW Spiral Arc<br />
|-<br />
! [[#G4_Timed_Pause|G4]] <br />
| Yes || Timed Pause<br />
|-<br />
! [[#G16_Arc_Plane:_Any|G16]] <br />
| Yes || Arc in Any Plane<br />
|-<br />
! [[#G17_Arc_Plane:_XY|G17]] <br />
| Yes || Arc in XY Plane<br />
|-<br />
! [[#G18_Arc_Plane:_XZ|G18]] <br />
| Yes || Arc in XZ Plane<br />
|-<br />
! [[#G19_Arc_Plane:_YZ|G19]] <br />
| Yes || Arc in YZ Plane<br />
|-<br />
! [[#M0_Stop_Until_Resume|M0]] <br />
| Yes || Stop Until Resume<br />
|-<br />
! [[#M203_Set_G0_Speed|M203]] <br />
| Yes || Set G0 Speed<br />
|-<br />
! [[#M674_Use_Turbo_Mode|M674]]<br />
| Yes || Rapid G1 Moves<br />
|-<br />
|}<br />
<br />
=== G0 Rapid Move ===<br />
<br />
G0 is a rapid positioning move. It is not a ''working'' move, meaning that your equipment will not be printing, milling, lasering, or doing any other active work during a G0 move. G0 is intended to move your tool to a new position, where the work will happen. Accordingly, G0 movement speeds are set in your configuration settings, rather than being specified in your gcode file. <br />
<br />
Special note: a G0 command will take an F variable as a nonpersistent, one-time velocity setting. <br />
<br />
'''Usage'''<br />
G0 Xn Yn Zn An Bn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G0 X50 Y75 Z10<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G0''' (rapid (nonprinting) straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** '''Z10''' (10mm in the Z) <br />
** (no change in A)<br />
** (no change in B)<br />
** (no change in F, use settings-specified feed rate)<br />
<br><br />
<hr><br />
<br />
=== G1 Working Move ===<br />
<br />
G1 is a working move, during which you may be printing, milling, lasering, or doing other active work - provided an E (extrude) value is given. In native mode (if you don't add '''M229 E1 Dn''', the value of Extrusion rate E will be ignored, but E will trigger a working or printing move. In E-value mode (by adding '''M229 E1 Dn''', the slicer-determined E value will be used to control material flow. G1 moves are made at the rate indicated by the F (feed rate) value; if no F value is specified, the last F value set will be used. See '''[[#M229_Use_E_Values|M229]]''' for more details.<br />
<br />
'''Usage'''<br />
G1 Xn Yn Zn An Bn Fn Sn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to move to <br />
'''An''' is the new A position to move to<br />
'''Bn''' is the new B position to move to<br />
'''En''' is the cumulative E axis (extrusion) position to move (or advance) to<br />
'''Hn''' is the stored head offset to apply (see '''M660''' to store offsets)<br />
'''Fn''' is the feed rate or travel speed to use. Only on '''G0''' is it not persistent<br />
'''Sn''' is a one-time (non-persistent) material flow rate multiplier (rarely used) applied to this move only<br />
<br />
''Any values not stipulated remain unchanged.''<br />
<br />
Note: These positioning values can be absolute or relative to the last position; which depends on whether you are running on '''G90''' absolute positioning or '''G91''' relative positioning. Absolute is the default and should be used in the majority of cases; there will be problems with an entire model sliced in relative mode. Relative is intended for special operations like drilling holes.<br />
<br />
Note: All Hyrel printers have built-in support for three axes. Hyrel model 16A and EHR printers may be expanded to five; an additional axis on each machine is reserved for E values.<br />
<br />
'''Example'''<br />
<br />
G1 X50 Y75 E1 F1800 H2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in A)<br />
** (no change in B)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoking offsets stored in register H2)<br />
** (no temporary scaling)<br />
<br />
<br><br />
<hr><br />
<br />
=== G2 Clockwise Arc ===<br />
<br />
A G2 move specifies a clockwise arc (or complete circle) from the current position to position (X,Y,Z)<sub>curr</sub> by following an arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J). <br />
<br />
'''Usage'''<br />
<br />
G2 Xn Yn Zn In Jn Fn En Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 F1800<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
<br />
'''Example'''<br />
<br />
G2 X50 Y75 I15 J20 E1 S6<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2''' (working speed clockwise arc/circle move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''E1''' (while extruding) <br />
** (using previously established F rate)<br />
** '''S6''' (made up of six sides - resulting in a hexagon with one point at the origin, with all corners inscribed on the circle)<br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G2-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G2-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G2-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G2-4.png]]<br><br />
Note, if no endpoints are defined, G2 will make a 360° circle by default.<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool1.png]]<br />
<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.1 Spiral CW Arc<sup>1</sup> ===<br />
<br />
A G2.1 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Effective ending X/Y is always the same as the current XY and is not specified (though the actual final position is a function of the number of laps, the pitch, and the reverse code. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). An important feature is the "reverse code" to allow the creation of frog toes without having to jump over the frog toe once it's made. <br />
<br />
'''Usage'''<br />
<br />
G2.1 Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Note: '''In''' and '''Jn''' both default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Pn''' is the pitch (how close the laps are) in mm (required)<br />
'''Ln''' is the number of laps to complete (must be a positive integer; you don't need to finish the spiral)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Rn''' is a flag; 0 to spiral in (default), 1 to spiral out (after inward jump), 2 spiral out from current position<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.1 I15 J20 P1.2 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** (complete all laps)<br />
** '''P1.2''' (1.2 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (use default R of 0, spiral in toward center from current location)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.1 Z10 I15 J20 P0.5 L50 E1 S9 R1 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.1''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''L50''' (complete no more than 50 laps)<br />
** '''P0.5''' (0.5 mm between centers of travel of adjacent laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''R1''' (spiral out from center to current location)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.1 I25 J0 P4 L3 E1 ; spiral in 3 laps, 4mm pitch <br />
G1 X14 E1 ; add connector for the arcs<br />
G2.1 I11 J0 P4 L3 E1 R2 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
And since this can be a lot to take in, please feel fre to play around with Repetrel's built-in Arc/Spiral tool:<br />
<br />
[[File:Arctool2.1.png]]<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.2 Spiral CW Arc<sup>2</sup> ===<br />
<br />
A G2.2 makes a spiral circular move (only supports full 360 arcs, or '''Ln''' * 360). This arc is CW if spiraling in and CCW if spiraling out. Unlike G2.1, G2.2 specifies final X/Y (and Z) location. An end Z can be supplied to have a uniform displacement during the move. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). Unlike G2.1, G2.2 does not require a reverse code as the direction of spiral is determined by the positional relationship of the current position, final position, and center position.<br />
<br />
'''Usage'''<br />
<br />
G2.2 Xn Yn Zn In Jn Pn Ln En Sn Rn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to move to<br />
'''Yn''' is the new Y position to move to<br />
'''Zn''' is the new Z position to end at (optional and usually not stipulated; will be relative or absolute, depending on current mode)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
''Starting with Motion Controller firmware 4.203a:''<br />
''If I and J are both zero (center = start), path will spiral outward CCW from current to final position.''<br />
''If I and J match the end (center = end), path will spiral inward CW from current to final position."<br />
'''Pn''' is the pitch (how close the laps are) in mm (optional)<br />
'''Ln''' is the number of laps (or paths) to complete (you don't need to finish the spiral)<br />
''Note, if P and L values conflict, L will be modified to match what P will allow; at least one must be specified<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
'''Example 1'''<br />
<br />
G2.2 I15 J20 P1 E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** (no change in Z)<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (1mm between centers of travel of adjacent laps)<br />
** (complete all laps)<br />
** '''E1''' (while extruding) <br />
** (use default S of 0.33333 mm segments)<br />
** (moving at established G1 F speed)<br />
<br />
'''Example 2'''<br />
<br />
G2.2 Z10 I15 J20 P2 L50 E1 S9 F1200<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G2.2''' (working speed clockwise spiral move from the current location) <br />
** '''Z10''' (change Z position incrementally during move to end at Z10 (relative or absolute, depending on current mode))<br />
** (centered about a point located) <br />
** '''I15''' (15mm further in the X) <br />
** '''J20''' (20mm further in the Y) <br />
** '''P2''' (2mm between centers of travel of adjacent laps)<br />
** '''L50''' (complete no more than 50 laps)<br />
** '''E1''' (while extruding) <br />
** '''S9''' (each 360 degrees composted of a total of 9 segments)<br />
** '''F1200''' (at a speed of 1200 mm/min)<br />
<br />
'''Example 3'''<br />
<br />
G0 X0 Y25 ; start location for outer spiral<br />
G0 Z1 ; go to print layer height<br />
G2.2 X12 I25 P4 E1 ; spiral in 3 laps, 4mm pitch<br />
G1 X14 E1 ; add connector to next spiral<br />
G2.2 X2 I11 P4 E1 ; spiral out 3 laps, 4mm pitch<br />
<br />
This gcode also generates the following:<br />
<br />
[[File:Spiral.png|250px]]<br />
<br />
<br><br />
<hr><br />
<br />
=== G2.3 3-Space CW Arc ===<br />
<br />
A G2.3 move specifies a clockwise arc (or complete circle(s) from the current position to position (X,Y,Z)<sub>curr</sub> following a circular arc about the center point (X<sub>curr</sub>+I, Y<sub>curr</sub>+J, Z<sub>curr</sub>+K). Unlike G2, G2.1 and G2.2, G2.3 is not bound to the X/Y plane. The number of full 360 arcs can be specified as well as the pitch (centerline between arcs). <br />
'''Usage'''<br />
<br />
G2.3 Xn Yn Zn An Bn In Jn Kn Un Vn Wn Dn Pn En Sn Fn<br />
<br />
Note: If we are in G16 mode, Un, Vn, Wn define the vector normal to the work plane. If we are in G17 (X/Y plane) or G18 (X/Z plane) or G19 (Y/Z plane) mode, these are ignored.<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new X position to end at<br />
'''Yn''' is the new Y position to end at<br />
'''Zn''' is the new Z position to end at<br />
'''An''' is the new A position to end at (4th axis)<br />
'''Bn''' is the new B position to end at (5th axis)<br />
'''In''' is the '''''relative''''' distance from the current X position to the center position about which to arc (default 0)<br />
'''Jn''' is the '''''relative''''' distance from the current Y position to the center position about which to arc (default 0)<br />
'''Kn''' is the '''''relative''''' distance from the current Z position to the center position about which to arc (default 0)<br />
''Note: '''In''', '''Jn''', and '''Kn''' all default to 0, but at least one of them must be explicitly declared with a non-zero value.''<br />
'''Un''' is the X component of a vector normal to the working plane (default 0)<br />
'''Vn''' is the Y component of a vector normal to the working plane (default 0) <br />
'''Wn''' is the Z component of a vector normal to the working plane (default 0)<br />
'''Dn''' is the overall displacement normal to the working plane for this element<br />
'''Pn''' is the pitch (how close the laps are normal to the working plane) in mm (default 0; one path, no incremental displacement)<br />
'''En''' indicates a working or printing move<br />
'''Sn''' dictates how many segments are used to create the arc (or circle); 0.33333 mm is the default value<br />
''S values less than 3.0 dictate the length in mm of each segment for this element''<br />
''S values of 3.0 or more dictate how many total segments comprise this element - only allowed on complete circles of 360°''<br />
'''Fn''' is the Feed rate (travel speed) at which to execute this move.<br />
<br />
Any values not stipulated remain unchanged. We will print this element with our native Hyrel flow calculations (based on nozzle diameter, layer thickness, and feed rate) even if your gcode has enabled the use of E values with M229 E1 D1.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3 Counterclockwise Arc ===<br />
<br />
Please refer to G2, above, for details. All options are identical, with the exception of direction (CCW). <br />
<br />
'''Further Examples'''<br />
<br />
'''90°<br>'''<br />
[[File:G3-1.png]]<br />
<br />
'''180°<br>'''<br />
[[File:G3-2.png]]<br />
<br />
'''270°<br>'''<br />
[[File:G3-3.png]]<br />
<br />
'''360°<br>'''<br />
[[File:G3-4.png]]<br><br />
Note, if no endpoints are defined, G3 will make a 360° circle by default.<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.1 Spiral CCW Arc<sup>1</sup> ===<br />
<br />
Please refer to G2.1, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.2 Spiral CCW Arc<sup>2</sup> ===<br />
<br />
Please refer to G2.2, above, for details. All options are identical, with the exception of direction (CCW if spiraling in and CW if spiraling out).<br />
<br />
<br><br />
<hr><br />
<br />
=== G3.3 3-Space CCW Arc ===<br />
<br />
Please refer to G2.3, above, for details. All options are identical, with the exception of direction (CCW).<br />
<br />
<br><br />
<hr><br />
<br />
=== G4 Timed Pause ===<br />
<br />
G4 is a pause for a set number of seconds (S) or milliseconds (P). <br />
<br />
''You should ALWAYS include a one millisecond pause (G4 P1) after changing flow parameters with M221, prime parameters with M722, or unprime parameters with M721.''<br />
<br />
'''Usage'''<br />
<br />
G4 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the number of Seconds to pause<br />
'''Pn''' is the number of Milliseconds to pause<br />
<br />
You may use '''S''' or '''P''', or if you use both, the total value will be the pause duration.<br />
<br />
'''Example'''<br />
<br />
G4 S0.5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''S0.5''' (0.5 seconds)<br />
<br />
'''Example'''<br />
<br />
G4 P500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G4''' (Timed pause) <br />
** '''P500''' (500 milliseconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== G16 Arc Plane: Any ===<br />
<br />
G16 permits free-form designation of points in space, without limiting them to an axial plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G16<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G16<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G16''' (allow element in any orientation) <br />
<br />
<br><br />
<hr><br />
<br />
=== G17 Arc Plane: XY ===<br />
<br />
G17 restricts this element to the X/Y plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G17''' (restrict element to X/Y plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G18 Arc Plane: XZ ===<br />
<br />
G18 restricts this element to the X/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G18''' (restrict element to X/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== G19 Arc Plane: YZ ===<br />
<br />
G19 restricts this element to the Y/Z plane.<br />
<br />
''G16 through G19 only apply to G2.x and G3.x commands, and define the plane on which the element will be created.''<br />
<br />
'''Usage'''<br />
<br />
G19<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G19<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G19''' (restrict element to Y/Z plane) <br />
<br />
<br><br />
<hr><br />
<br />
=== M0 Stop Until Resume ===<br />
<br />
M0 is a stop until resume command; text listed after a semicolon will be displayed, and clicking the '''Play''' button (which replaces the '''Pause''' button) will cause the job to resume. Note that all lines will be truncated at 100 characters.<br />
<br />
* ''';''' All text following the ''';''' will be echoed to the print mask (Control Tab).<br />
<br />
Additionally, an M0 command can also take the following parameters, and so will pause and then:<br />
<br />
'''Usage'''<br />
<br />
M0 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume)<br />
<br />
'''Example'''<br />
<br />
M0 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M0''' (Pause until Resume) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
=== M203 Set G0 Speed ===<br />
<br />
M203 will redesignate the rate at which [[#G0 Rapid Move|G0]] movements are executed. If undeclared, the values stored in Repetrel for your equipment will be used. These can be changed under '''Settings > Printer''', on the '''Printer''' tab. The values set on your unit are set based on testing; exceed them at your own risk.<br />
<br />
'''Usage'''<br />
<br />
M203 Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new speed in the X axis for G0 moves<br />
'''Yn''' is the new speed in the Y axis for G0 moves<br />
'''Zn''' is the new speed in the Z axis for G0 moves<br />
'''An''' is the new speed in the A axis for G0 moves<br />
'''Bn''' is the new speed in the B axis for G0 moves<br />
<br />
'''Example'''<br />
<br />
M203 Y2000<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M203''' (Set G0 Speed) <br />
** (X remains unchanged)<br />
** '''Y2000''' (Y axis: 2000mm/min)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== M674 Use Turbo Mode ===<br />
<br />
M674 will enable Turbo Mode, where certain non-printing (no E value) working (G1, G2, or G3) moves will be treated as G0 moves (executed at "rapid move speed" rather than "working move speed"). Killing a job will clear the M674 setting.<br />
<br />
'''Usage'''<br />
<br />
M674 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the minimum distance threshold for Turbo Mode to activate, and is required; no S value returns an error.<br />
<br />
'''Example 1'''<br />
<br />
M674 S2<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S2''' (for moves of 2 mm or greater) <br />
<br />
'''Example 2'''<br />
<br />
M674 S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M674''' (Set Turbo Mode) <br />
** '''S50''' (for moves of 50 mm or greater)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Temperature''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Temperature<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M104_Set_Temp_.28Head.29|M104]] <br />
| Yes || Set Temp (Head)<br />
|-<br />
! [[#M106_Set_Cooling_.2F_Etc.|M106]] <br />
| Yes || Set Cooling / Etc.<br />
|-<br />
! [[#M107_Stop_Cooling_.2F_Etc.|M107]] <br />
| Yes || Stop Cooling / Etc.<br />
|-<br />
! [[#M109_Wait_for_Temp_.28Head.29|M109]] <br />
| Yes || Wait for Temp (Head)<br />
|-<br />
! [[#M116 Wait for Temps (v5+)|M116]] <br />
| <span style="color:darkorange;">v5+ || <span style="color:darkorange;">Pause for All Temps<br />
|-<br />
! [[#M140_Set_Temp_.28Bed.29|M140]] <br />
| Yes || Set Temp (Bed)<br />
|-<br />
! [[#M141_Set_Temp_.28Chamber.29|M141]] <br />
| Yes || Set Temp (Chamber)<br />
|-<br />
! [[#M190_Wait_for_Temp_.28Bed.29|M190]] <br />
| Yes || Wait for Temp (Bed)<br />
|-<br />
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]] <br />
| Yes || Wait for Temp (Chamber)<br />
|-<br />
|}<br />
<br />
What's Hotbed 2 and Chamber 2? Well, our Hydra models have room to have a second hotbed, which could be a smaller, higher temperature hotbed, or a sub-ambient chilled bed, or even a High Resolution hotbed. And we've talked about having a smaller chamber inside the primary chamber, to bring the air around the print (but not the head) to much higher temperatures; call for details.<br />
<br />
<br><br />
<hr><br />
<br />
=== M104 Set Temp (Head) ===<br />
<br />
M104 sets the extruder temperature but does not pause the printer. <br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M104 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the tool assignment for this temperature command<br />
<br />
'''Example'''<br />
<br />
M104 T# S75 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M104''' (Set Temperature) <br />
** '''T#''' (target head)<br />
** '''S75''' (to 75°C)<br />
<br />
<br><br />
<hr><br />
<br />
=== M106 Set Cooling / Etc. ===<br />
<br />
M106 sets the cooling fan (or crosslinking LEDs) speed (or intensity). This also turns on the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M106 Cn<br />
<br />
or<br />
<br />
M106 T# Sn<br />
<br />
or <br />
<br />
M106 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head<br />
'''Sn''' is the percent of duty cycle for the cooling fan (or LEDs); default: 100<br />
'''Cn''' is the range (0-100 or 0-255) that we will use; if unspecified, the default is C100 (use C255 to be compatible with most slicers)<br />
'''Pn''' is the percent of duty cycle for the cooling fan (or LEDs) ''to come on only during extrusion moves''<br />
<br />
'''Example'''<br />
<br />
M106 C255<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** (on all tools)<br />
** (no speed)<br />
** '''C255''' (of range 0-255)<br />
<br />
Note, with this command, all following M106 commands for the rest of this print job will be based on this range (unless specified with a new C value).<br />
<br />
'''Example'''<br />
<br />
M106 T# S50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''S50''' (target value of 50)<br />
** (previously defined (or default 0-100) range)<br />
<br />
'''Example'''<br />
<br />
M106 T# P100 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M106''' (Set Cooling/LEDs) <br />
** '''T#''' (target head)<br />
** '''P100''' (during extrusion moves at 100% duty cycle<br />
<br />
<span style="color: blue;">''But Davo, I want to cure a certain spot for 10 seconds with every layer change; how do I do this?''</span><br />
<br />
Easy. Edit your slicer recipe to add the following code after layer changes (edit as needed for duration, intensity, or position):<br />
<br />
;---- BEGIN COD CODE<br />
G91 ; relative moves<br />
G0 Z5 ; drop bed<br />
G90 ; absolute moves<br />
G0 X130 Y110 ; move into position<br />
M106 S100 T# ; turn on T# UV at 100%<br />
G1 X140 Y110 F100 ; move 10 mm in the X at 100 mm/min<br />
G1 X140 Y120 F100 ; move 10 mm in the Y at 100 mm/min<br />
G1 X130 Y120 F100 ; move -10 mm in the X at 100 mm/min<br />
G1 X130 Y110 F100 ; move -10 mm in the Y at 100 mm/min<br />
M106 S0 T# ; turn off T# UV (set it to 0%)<br />
;--- END COD GCODE<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (Use relative moves)<br />
* '''G0''' (Non-working move)<br />
** '''Z5''' (+5 mm in the Z)<br />
* '''G90''' (Use absolute moves)<br />
* '''G0''' (Non-working move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S100''' (100% duty)<br />
** '''T#''' (On target head)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X140''' (To position X140)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y120''' (To position Y120<br />
** '''F100''' (At 100 mm/min)<br />
* '''G1''' (Working (printing) move)<br />
** '''X130''' (To position X130)<br />
** '''Y110''' (To position Y110<br />
** '''F100''' (At 100 mm/min)<br />
* '''M106''' (Set Aux (UV))<br />
** '''S0''' (0% duty)<br />
** '''T#''' (On target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M107 Stop Cooling / Etc. ===<br />
<br />
M107 turns off the cooling fan (or crosslinking LEDs); this is essentially the same as an M106 S0 (setting it to 0 percent). This will also turn off the Quiet Storm fan.<br />
<br />
'''Usage'''<br />
<br />
M107 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (target head)<br />
<br />
'''Example'''<br />
<br />
M107 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M107''' (Set Cooling/LEDs to 0%) <br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M109 Wait for Temp (Head) ===<br />
<br />
M109 waits for the extruder to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) heads as options.<br />
<br />
''Note that the actual '''T#''' values can be found on '''[[T_v4]]''' or '''[[T_v5]]''', depending on which version you are running.''<br />
<br />
'''Usage'''<br />
<br />
M109 T# Sn Hn Cn Ln Un Rn <span style="color:darkorange;">W0<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M109 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target head - (required)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<span style="color:darkorange;">'''W0''' if present, will set the temp and advance to the next line without pause, but upon executing M116, will pause until temp is reached<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M109 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M109 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M109 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M109 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M109 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M109''' (wait for temp) <br />
** '''T#''' (target head)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M109 R10<br />
<br />
* '''M109''' (wait for temp)<br />
** (no T# - use head with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<span style="color:darkorange;">'''Example 7'''<br />
<br />
<span style="color:darkorange;">M109 T# S240 W0<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M109''' (wait for temp) <br />
** <span style="color:darkorange;">'''T#''' (target head)<br />
** <span style="color:darkorange;">'''S240''' (and set temp to 240°C)<br />
** <span style="color:darkorange;">'''W0''' (but do not pause until M116 is executed)<br />
<br />
<br><br />
<hr><br />
<br />
=== <span style="color:darkorange;">M116 Wait for Temps (v5+)</span> ===<br />
<br />
<span style="color:darkorange;">M116 is supported with version 5.x and later (v5+) of Repetrel Software and Motion Controller Firmware.<br />
<br />
<span style="color:darkorange;">'''Usage'''<br />
<br />
<span style="color:darkorange;">M116 <br />
<br />
<span style="color:darkorange;">'''Parameters'''<br />
<br />
<span style="color:darkorange;">'none'<br />
<br />
<span style="color:darkorange;">'''Example'''<br />
<br />
<span style="color:darkorange;">M116<br />
<br />
<span style="color:darkorange;">This command is decoded and executed by the printer as follows:<br />
<br />
* <span style="color:darkorange;">'''M116''' (wait for any set temps (M109, M190, M191) with '''W0''' values before proceding<br />
<br />
<br><br />
<hr><br />
<br />
=== M140 Set Temp (Bed) ===<br />
<br />
M140 sets the bed temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M140 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target bed (default is the primary bed)<br />
<br />
'''Example'''<br />
<br />
M140 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M140''' (set bed temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary bed)<br />
<br />
<br><br />
<hr><br />
<br />
=== M141 Set Temp (Chamber) ===<br />
<br />
M141 sets the chamber temperature (without waiting for the new temperature to be reached).<br />
<br />
'''Usage'''<br />
<br />
M141 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target chamber (default is the primary chamber)<br />
<br />
'''Example'''<br />
<br />
M141 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M141''' (set chamber temperature)<br />
** '''S75''' (to 75°C)<br />
** (on primary chamber)<br />
<br />
<br><br />
<hr><br />
<br />
=== M190 Wait for Temp (Bed) ===<br />
<br />
M190 waits for the bed to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) beds as options.<br />
<br />
'''Usage'''<br />
<br />
M190 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M190 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' (optional) is the target bed (default is the primary (or only) bed)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M190 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M190 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M190 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M190 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M190 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M190''' (wait for temp) <br />
** '''T#''' (target bed)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M190 R10<br />
<br />
* '''M190''' (wait for temp)<br />
** (no T# - use bed with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
=== M191 Wait for Temp (Chamber) ===<br />
M191 waits for the chamber to reach temperature, with an option to also set the temperature. Remember, we have both heated and chilled (sub-ambient) chambers as options.<br />
<br />
'''Usage'''<br />
<br />
M191 T# Sn Hn Cn Ln Un Rn<br />
<br />
Please use EITHER (H and/or C) OR (L and/or U) OR (R) with your M191 command.<br />
<br />
Note, this will FAIL (non-fatally) if you address a virtual group address; be sure to use an actual physical address.<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the target chamber (default is the primary (or only) chamber)<br />
'''Sn''' (optional) is the new set temperature in °C; if omitted, no new target temperature is set<br />
'''Hn''' if present, is the low-end (or "heat up to") absolute temperature after which we stop pausing<br />
'''Cn''' if present, is the high-end (or "cool down to") absolute temperature after which we stop pausing<br />
'''Ln''' if present, is the lower-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Un''' if present, is the upper-end relative temperature ''difference from set temp'' after which we stop pausing<br />
'''Rn''' if present, is how close the relative temperature needs to be to the set temp to end the pause<br />
<br />
Think of '''Sn''' as the target temperature, but once the target is between '''Cn (or Ln)''' and '''Hn (or Un)''', the pause is over (but the '''Sn''' is still the set temp to reach. You can use Hn or Ln, but not both. You can use Cn or Un, but not both.<br />
<br />
'''Example 1'''<br />
<br />
M191 T# S240<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
<br />
'''Example 2'''<br />
<br />
M191 T# S240 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''R5''' (but end the wait once the target's temperature is within 5°C of the set point)<br />
<br />
'''Example 3'''<br />
<br />
M191 T# S240 H230<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''H230''' (but end the wait once the target's temperature reaches 230°C)<br />
<br />
'''Example 4'''<br />
<br />
M191 T# S240 L10 U5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S240''' (and set temp to 240°C)<br />
** '''L10''' (but end the wait once the target's temperature reaches 10°C below the set point)<br />
** '''U5''' (or end the wait once the target's temperature reaches 5°C above the set point)<br />
<br />
''Note: this wait ends when the target's temperature is anywhere between 230°C and 245°C''<br />
<br />
'''Example 5'''<br />
<br />
M191 T# S0 R5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M191''' (wait for temp) <br />
** '''T#''' (target chamber)<br />
** '''S0''' (to 0°C)<br />
** '''R5''' (but end the wait once the target's temperature is +/-5°C of the set temperature)<br />
<br />
'''Example 6'''<br />
<br />
M191 R10<br />
<br />
* '''M191''' (wait for temp)<br />
** (no T# - use chamber with current focus)<br />
** '''R10''' (to get +/-10°C of set temperature)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Material Flow''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Material Flow<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Absolute E''<br />
|-<br />
! [[#G11_UNUSED|G11]] <br />
| ''No'' || ''Relative E''<br />
|-<br />
! [[#M82_Absolute_E-Values|M82]] <br />
| Yes || Absolute E-Values<br />
|-<br />
! [[#M83_Relative_E-Values|M83]] <br />
| Yes || Relative E-Values<br />
|-<br />
! [[#M221_Set_Flow_Rate|M221]] <br />
| Yes || Set Flow Rate<br />
|-<br />
! [[#M229_Use_E_Values|M229]] <br />
| Yes || Use E Values<br />
|-<br />
! [[#M703_Cloning_Heads|M703]] <br />
| Yes || Parallel Printing<br />
|-<br />
! [[#M721_Set_Unprime_Values|M721]] <br />
| Yes || Unprime or Retract<br />
|-<br />
! [[#M722_Set_Prime_Values|M722]] <br />
| Yes || Prime or Advance<br />
|-<br />
! [[#M723_Set_Manual_Flow|M723]] <br />
| Yes || Set Manual Flow<br />
|-<br />
! [[#M728_Set_Motor_Current_Boost|M728]] <br />
| Yes || Set Motor Current Boost<br />
|-<br />
! [[#M756_Set_Height_for_Flow|M756]] <br />
| Yes || Set Height for Flow<br />
|-<br />
|}<br />
<br />
You can specify flow rate variables in your gcode; we do not do this by default, but take these values from the head itself. Any values you stipulate in your gcode will supersede the values stored on the head. With our recipes the slicing program generates gcode which dictates temperature and movement commands and indicates which moves should dispense material (a G1 move with an E value). <br />
<br />
However, we have two different ways to control flow. <br />
<br />
* If you use '''M229 E1 D1''' we will use the E values generated by the slicer ''for printing moves, but we will always use the prime/unprime settings on the head for advancing and retracting when transitioning between printing and non-printing moves.'' This allows for varying extrusion widths and layer thicknesses (on the same layer - as with support material). This is how just about all slicers and printers work.<br />
<br />
* If you do not use that command, we do not use that E value (except to distinguish printing from non-printing moves) we calculate for flow based purely on travel speed, declared layer thickness, and nozzle diameter. This is explained at http://hyrel3d.net/wiki/index.php/Flow_Rate<br />
<br />
When a head is loaded, it sends this flow data (how to calculate flow, as well as how much to prime and unprime (advance and retract) material when transitioning between printing and non-printing moves - and even how many primes or unprimes to do in conjunction with a tool change.<br />
<br />
In this way, the very same gcode (with temperature changes) can be used with any material, provided you are using the same physical parameters that the model was sliced for.<br />
<br />
<br><br />
<hr><br />
<br />
=== G10 UNUSED<sup>1</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== G11 UNUSED ===<br />
<br />
G11 is not recognized by Repetrel. <br />
<br />
On some other printers, this will do an advance or unretract; we do this via '''M722'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== M82 Absolute E-Values ===<br />
<br />
M82 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the original (0) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M82<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M82<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M82''' (use absolute E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M83 Relative E-Values ===<br />
<br />
M83 stipulates that henceforth, the extrusion positioning (E values) will be calculated from the relative (last used) point.<br />
<br />
Note, this only works on v4 and later, when E values are enabled via '''M229'''.<br />
<br />
'''Usage'''<br />
<br />
M83<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M83<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M83''' (use relative E values)<br />
<br />
<br><br />
<hr><br />
<br />
=== M221 Set Flow Rate ===<br />
<br />
M221 sends information to the printer about material flow.<br />
<br />
Note, our default mode is volumetric calculations; if you need to slice with linear calculations, multiply your Pn by approximately 2.4 (you can do the math).<br />
<br />
'''Usage'''<br />
<br />
M221 Pn Sn Wn Zn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the number of pulses on the motor to dispense 1 μl of material;<br />
'''Sn''' is the direct flow multiplier (to allow for undersized or oversized stock;<br />
'''Wn''' is the width of the cross section of the volume to fill;<br />
'''Zn''' is the height (layer thickness) of the cross section of the volume to fill; and<br />
'''T#''' is the tool (head) to which these values will be applied.<br />
As always, any parameters not specified will be inherited from your environment.<br />
<br />
'''Example'''<br />
<br />
M221 S1.0 T# P77 W0.5 Z0.3<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M221''' (set flow rate) <br />
** '''S1.0''' (flow multiplier of 1.0) <br />
** '''T#''' (target head) <br />
** '''P77''' (77 pulses per microliter) <br />
** '''W0.5''' (0.5mm nozzle) <br />
** '''Z0.3''' (0.3mm layer thickness - note that your gcode '''M756''' will overwrite this value)<br />
<br />
<br><br />
<hr><br />
<br />
=== M229 Use E Values ===<br />
<br />
'''Starting with version 4''', Hyrel will begin to enable the use of E-values in your gcode. Variable extrusion width and support/infill thickness slicers, rejoice! Note, calculations are done for every single move individually.<br />
<br />
'''Usage'''<br />
<br />
M229 En Dn Sn<br />
<br />
'''Parameters'''<br />
<br />
'''En''' can be 0 (native flow calculation) or 1 (use E values)<br />
'''Dn''' how directed to head; see below<br />
'''D0''' on head controller directly; constant flow, not adjusted for motion acceleration/deceleration<br />
'''D1''' on motion controller, sent to head via CANBUS and adjusted for motion acceleration/deceleration<br />
'''D2''' on motion controller, sent to head via C axis step pin and adjusted for motion acceleration/deceleration<br />
'''D3''' on motion controller, sent to head via CANBUS and C axis and adjusted for motion acceleration/deceleration<br />
'''Sn''' sets a threshold in seconds; isolated non-printing moves below this threshold will not trigger unprime/prime actions<br />
<br />
Note: E1 D0 is an illegal combination.<br />
<br />
'''Example 1'''<br />
<br />
M229 E1 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E1''' (enabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
''Above is the default way to enable E values.''<br />
<br />
'''Example 2'''<br />
<br />
M229 E0 D0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
<br />
''Above is the default way to ignore E values, and is how v3 and earlier releases work.''<br />
<br />
'''Example 3'''<br />
<br />
M229 E0 D1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D1''' (flow calculations directed via CANBUS and adjusted to motion acceleration/deceleration)<br />
<br />
'''Example 4'''<br />
<br />
M229 E0 D0 S0.02<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M229''' (E values) <br />
** '''E0''' (disabled) <br />
** '''D0''' (flow calculations on head controller)<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning/Parallel Printing ===<br />
<br />
<span style="color: red;">'''NOTE: M703 DOES NOT WORK WITH M229 E1 D1. YOU MUST USE M229 E0 D0, and use our native flow calculations instead of E values'''<br />
<br />
Clone, slave, or parallel printing, is when one head makes a normal print, and another head makes the ''exact same print'' at the same time.<br />
<br />
We will normally execute a T command first, to establish the primary or master head (generally the one to the left). Then the M703 command, cloning or slaving another head to the first. <br />
<br />
Remember, this is how we address the tool positions; note that the 30M and ESR have four positions, not five. Counting from the leftmost position:<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ T Commands and T Variables for Standard Addresses<br />
|-<br />
! style="width: 15%;" | Command<br />
! style="width: 15%;" | <span style="color: red;">1st Slot</span><br />
! style="width: 15%;" | 2nd Slot<br />
! style="width: 15%;" | <span style="color: royalblue;">3rd Slot</span><br />
! style="width: 15%;" | 4th Slot<br />
! style="width: 15%;" | <span style="color: limegreen;">5th Slot</span><br />
|-<br />
! Tool Change<br />
| <span style="color: red;">'''T0'''</span><br />
| T1<br />
| T2<br />
| T3<br />
| T4<br />
|-<br />
! Clone Address<br />
| T11<br />
| T12<br />
| <span style="color: royalblue;">'''T13'''</span><br />
| T14<br />
| <span style="color: limegreen;">'''T15'''</span><br />
|-<br />
! Master Address<br />
| <span style="color: red;">'''S11'''</span><br />
| S12<br />
| S13<br />
| S14<br />
| S15<br />
|-<br />
|}<br />
<br />
In the following example we have a five-position yoke; commands executed by the head in <span style="color: red;">'''slot 1''' (far left)</span> will also be executed by the heads in both <span style="color: royalblue;">'''slot 3''' (third from left)</span> and <span style="color: limegreen;">'''slot 5''' (fifth from left)</span>:<br />
<br />
<span style="color: red;">T0</span><br />
M703 <span style="color: royalblue;">T13</span> <span style="color: red;">S11</span><br />
M703 <span style="color: limegreen;">T15</span> <span style="color: red;">S11</span><br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* <span style="color: red;">'''T0''' - Assign commands to Position 1 (the far left head on yoke 1)</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: royalblue;">'''T13''' - Tool Position 3 </span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
* '''M703''' - Begin to Duplicate Commands:<br />
** <span style="color: limegreen;">'''T15''' - Tool Position 5</span><br />
** <span style="color: red;">'''S11''' - Slave to Position 1</span><br />
<br />
Note that only Hydra (16A) and High Resolution Engine (EHR) units have five tool positions; other models have four only. See '''Understanding the T''' at the top of '''[[Gcode|the Gcode page]]''' for tool position nomenclature.<br />
** '''S0.02''' (isolated non-printing moves of under 0.02 seconds will not trigger unprime/prime actions)<br />
<br />
<br><br />
<hr><br />
<br />
=== M721 Set Unprime Values ===<br />
<br />
M721 sends information to the printer about how much material to unprime (retract) when a transition from printing move to non-printing move is detected.<br />
<br />
'''Usage'''<br />
<br />
M721 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds prior to the end of the current printing move to begin the unprime (retract) action; a negative number initiates this before the end of the move<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M721 I1''' would execute an unprime with the previously specified values at that point in the gcode.<br />
<br />
'''Example 1'''<br />
<br />
M721 S10000 E100 P-15 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
<br />
'''Example 2'''<br />
<br />
M721 T# I1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (unprime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
<br />
<br><br />
<hr><br />
<br />
=== M722 Set Prime Values ===<br />
<br />
M722 sends information to the printer about how much material to prime (advance) when a transition from non-printing move to printing move is detected. This is done primarily to compensate for an earlier unprime (retract), to prep the head to be ready to dispense.<br />
<br />
'''Usage'''<br />
<br />
M722 Sn En Pn T# In<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which unprime moves should be executed; this is normally 10,000<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials<br />
'''Pn''' is the number of milliseconds to dwell at the start of the next printing move to allow for the prime (advance) action<br />
'''T#''' is the target head<br />
'''In''' is the flag for executing an Immediate action; so '''M722 I1''' would execute a prime with the previously specified values at that point in the gcode.<br />
<br />
'''Example'''<br />
<br />
M722 S10000 E100 P-15 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (prime) <br />
** '''S10000''' (set rate to 10,000 pps) <br />
** '''E100''' (set pulses to 100) <br />
** '''P-15''' (set dwell to 15ms before end of print move )<br />
** '''T#''' (on target head)<br />
** (but no immediate execution; execute when needed)<br />
<br />
'''Example'''<br />
<br />
M722 T# I1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M722''' (prime) <br />
** '''T#''' (on target head)<br />
** '''I1''' (now)<br />
<br />
<br><br />
<hr><br />
<br />
=== M723 Set Manual Flow ===<br />
<br />
M723 tells the designated extruder(s) to advance material for the specified number of pulses (on the motor) at the specified rate, regardless of any X/Y/Z movement. It is normally used only during manual operation, not during gcode execution. It can be used after moving to a location to dispense a set amount of material (like depositing material into reservoirs). We recommend adding a timed pause (G4) after the extrusion command if you want to extrude without moving.<br />
<br />
M723 is also used to activate and set speed on the stirring apparatus on the DMH dynamic mixing head.<br />
<br />
<br />
'''Usage'''<br />
<br />
M723 Sn En T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the speed at which the motor should advance, in pulses per second (default: 500);<br />
'''En''' is the number of pulses on the feed (extrusion) motor to execute (default of 65535 is essentially "forever");<br />
'''T#''' is the target head<br />
<br />
'''Example'''<br />
<br />
M723 S500 E50000 T#<br />
G4 S5<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M723''' (start manual feed) <br />
** '''S500''' (at 500 pulses per second) <br />
** '''E50000''' (for 50000 pulses) <br />
** '''T#''' (target head)<br />
* '''G4''' (Timed pause) <br />
** '''S3''' (3 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M728 Set Motor Current Boost ===<br />
<br />
M728 will set the motor current boost; default is 0.<br />
<br />
'''Usage'''<br />
<br />
M728 Sn T#<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the new set temperature in °C<br />
'''T#''' is the target head (or device)<br />
<br />
'''Example'''<br />
<br />
M728 T# S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M728''' (set motor current boost)<br />
** '''T#''' (target head)<br />
** '''S0''' (off)<br />
<br><br />
<hr><br />
<br />
=== M756 Set Height for Flow ===<br />
<br />
M756 will overwrite the Z value from the M221 command, allowing you to calculate flow for thinner or thicker layers. We declare M756 at the beginning of every layer; normally, they are all the same (unless you sliced for varying layer thicknesses). <br />
<br />
Note: this command is ignored if you are using '''M229 E1 D1''' to enable use of E values.<br />
<br />
Note: this does NOT change your Z position; see G0 or G1 for that.<br />
<br />
'''Usage'''<br />
<br />
M756 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the layer thickness in mm for flow calculations<br />
<br />
'''Example'''<br />
<br />
M756 S0.125<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M756''' (set layer height for flow calculations) <br />
** '''S0.125''' (at 0.125mm)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Position and Offsets''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Position and Offsets<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#G10_UNUSED|G10]] <br />
| ''No'' || ''Set Offsets''<br />
|-<br />
! [[#G20_Set_Units_to_Inches|G20]] <br />
| Yes || Set Units to Inches<br />
|-<br />
! [[#G21_Set_Units_to_Milimeters|G21]] <br />
| Yes || Set Units to Milimeters<br />
|-<br />
! [[#G28_Send_to_Physical_Home|G28]] <br />
| Yes || Send to Physical Home<br />
|-<br />
! [[#G53_Clear_Offsets|G53]] <br />
| Yes || Clear Offsets<br />
|-<br />
! [[#G54_-_G59_-_Set_Offsets|G54-59]] <br />
| Yes || Set Offsets<br />
|-<br />
! [[#G90_Absolute_Positioning|G90]] <br />
| Yes || Absolute Positioning<br />
|-<br />
! [[#G91_Relatative_Positioning|G91]] <br />
| Yes || Relatative Positioning<br />
|-<br />
! [[#G92_Reset_Coordinate_Offsets|G92]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#G93_Clear_Coordinate_Offsets|G93]] <br />
| Yes || Reset Coordinates<br />
|-<br />
! [[#M6_Declare_Head_Offsets|M6]] <br />
| Yes || Declare Head Offsets<br />
|-<br />
! [[#M660_Assign_Tool_Height_Offset|M660]] <br />
| Yes || Set Tool Offsets<br />
|-<br />
! [[#M702_-_M704_Cloning_Heads|M702-4]] <br />
| Yes || Cloning Heads<br />
|-<br />
|}<br />
<br />
<span style="color: red;">'''DRAGGING A GCODE RENDERING AROUND ON THE PRINT BED DOES NOTHING IN EARLIER VERSIONS!''' <br>Either positiong the stl properly before slicing, or reposition the gcode with a G54 offset - read below.</span>.<br />
<br />
The following commands define if new positioning data is defined in inches (G20) or mm (G21); or from the origin (G90) or from the present location (G91). They also stipulate the offsets from one head to another (M6), and how to invoke that offset (T).<br />
<br />
=== G10 UNUSED<sup>2</sup> ===<br />
<br />
G10 is not recognized by Repetrel. <br />
<br />
On some other printers, this will set tool offsets; we do this via '''M6'''. <br />
<br />
On some other printers, this will do a retract; we do this via '''M721'''.<br />
<br />
=== G20 Set Units to Inches ===<br />
<br />
G20 declares that henceforth, measurements will be given in inches.<br />
<br />
'''''Working with G20 is experimental and unsupported on Hyrel equipment. Use at your own risk.'''''<br />
<br />
'''Usage'''<br />
<br />
G20<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G20''' (set units to inches)<br />
<br />
<br><br />
<hr><br />
<br />
=== G21 Set Units to Millimeters ===<br />
<br />
G21 declares that henceforth, measurements will be given in mm.<br />
<br />
'''Usage'''<br />
<br />
G21<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G21<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G21''' (set units to milimeters)<br />
<br />
<br><br />
<hr><br />
<br />
=== G28 Send to Physical Home ===<br />
<br />
G28 sends the specified axes to the sensor-defined physical home position, regardless of logically set 0,0, then pop-off and re-acquire the sensor threshold at a slower rate. This pop-off and re-acquire was implemented during v3.<br />
<br />
After homing, a '''G28''' also resets current offsets to 0 - including any may have been set with a '''G92''' or an H (as defined in an '''M660''' and invoked on a '''G1'''), performs a '''G53''', and applies a head offset of 0 mm (as in an '''M6 O0''').<br />
<br />
Any axis not homed will have its position remain unchanged. We do not support intermediate positioning during homing.<br />
<br />
'''Usage'''<br />
<br />
G28 Xn Yn Zn An Bn I1<br />
<br />
'''Parameters'''<br />
<br />
'''X0''' ensures that the X axis is homed<br />
'''Y0''' ensures that the Y axis is homed<br />
'''Z0''' ensures that the Z axis is homed<br />
'''A0''' ensures that the A axis is homed<br />
'''B0''' ensures that the B axis is homed<br />
<br />
'''Example'''<br />
<br />
G28 X0 Y0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G28''' (home axis)<br />
** '''X0''' (X axis to 0)<br />
** '''Y0''' (Y axis to 0)<br />
** (Z remains unchanged)<br />
** (A remains unchanged)<br />
** (B remains unchanged)<br />
<br />
<br><br />
<hr><br />
<br />
=== G53 Clear Offsets ===<br />
<br />
G53 sets the fixture offsets to (0,0,0,0,0). This takes no arguments or variables. It does not clear stored offset values.<br />
<br />
'''Usage'''<br />
<br />
G53<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G53<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G53''' (set fixture offsets to 0; no effect on H (head) offsets)<br />
<br />
<br><br />
<hr><br />
<br />
=== G54 - G59 - Set Offsets ===<br />
<br />
G54, G55, G56, G57, G58, and G59 will each store and invoke fixture offsets in the X, Y, Z, A, and/or B axes for all subsequent moves. Any values not invoked will remain with their previous value (0 unless earlier specified otherwise). These offsets apply to all positioning until a new offset is applied, or a '''G53''' is used to clear all offsets.<br />
<br />
This graphic shows how printers (OTHER THAN THE EHR) use the G54-G59 offsets:<br />
<br />
[[File:G54.png|600px]]<br />
<br />
Note that this differs from an '''M6''', where the offsets are only applied to a SINGLE tool position. These offsets are cumulative with '''M6''' values.<br />
<br />
'''Usage'''<br />
<br />
G54 (... G59) Xn Yn Zn An Bn<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the offset in mm in the X axis<br />
'''Yn''' is the offset in mm in the Y axis<br />
'''Zn''' is the offset in mm in the Z axis<br />
'''An''' is the offset in mm in the A axis<br />
'''Bn''' is the offset in mm in the B axis<br />
<br />
'''Example'''<br />
<br />
G54 X30 Y-20<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G54''' (set units to milimeters)<br />
** '''X30''' (add 30mm to all X positions)<br />
** '''Y-20''' (subtract 20mm from all Y positions)<br />
** (no change to prior stored offsets)<br />
<br />
'''Example'''<br />
<br />
G55<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G55''' (apply new fixture offsets)<br />
** (no variable: use previous G55 values, or as stored under Settings > Printer > Fixture Offsets)<br />
<br />
<br />
<br><br />
<hr><br />
<br />
=== G90 Absolute Positioning ===<br />
<br />
G90 stipulates that henceforth, the positioning will be calculated from the origin (0,0 point).<br />
<br />
'''Usage'''<br />
<br />
G90<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G90<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G90''' (use absolute positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G91 Relatative Positioning ===<br />
<br />
G91 stipulates that henceforth, the positioning will be calculated relative to the starting position.<br />
<br />
'''Usage'''<br />
<br />
G91<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G91<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G91''' (use relative positioning)<br />
<br />
<br><br />
<hr><br />
<br />
=== G92 Reset Coordinate Offsets ===<br />
<br />
G92 resets the current position to the specified coordinates for all axes enumerated. <br />
<br />
'''Usage'''<br />
<br />
G92 Xn Yn Zn An Bn En<br />
<br />
'''Parameters'''<br />
<br />
'''Xn''' is the new value for the current X position<br />
'''Yn''' is the new value for the current Y position<br />
'''Zn''' is the new value for the current Z position<br />
'''An''' is the new value for the current A position<br />
'''Bn''' is the new value for the current B position<br />
'''En''' is the new value for the current E position<br />
<br />
'''Example'''<br />
<br />
G92 X0 Y50<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''X0''' (present X position is 0)<br />
** '''Y50''' (present Y position is 50)<br />
<br />
'''Example'''<br />
<br />
G92 E0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G92''' (replace current values)<br />
** '''E0''' (present E position is 0)<br />
<br />
<br><br />
<hr><br />
<br />
=== G93 Clear Coordinate Offsets ===<br />
<br />
G93 clears ALL offsets implemented via '''G92''' command.<br />
<br />
'''Usage'''<br />
<br />
G93<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
G93<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G93''' (clear coordinate offset values, all axes)<br />
<br />
<br><br />
<hr><br />
<br />
=== M6 Declare Head Offsets ===<br />
<br />
M6 declares that a particular head holds a set of X, Y, and/or Z offsets, which will be invoked during a T (tool change) command. Repetrel automatically reads this data from the information stored on the heads, and sends it to the printer before the gcode file is loaded.<br />
<br />
'''Usage'''<br />
<br />
M6 T# On Xn Yn Zn An Bn Dn In Kn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the Tool position for which these offsets are being set<br />
'''On''' is the Offset position where these are being stored<br />
'''Xn''' is the offset in the X axis<br />
'''Yn''' is the offset in the Y axis<br />
'''Zn''' is the offset in the Z axis<br />
'''An''' is the offset in the A axis<br />
'''Bn''' is the offset in the B axis<br />
'''Dn''' is the current tool diameter (used with pocket commands)<br />
'''In''' non-persistent; can be default 0 (store values but do not move these distances) or 1 (store values and move these distances)<br />
'''Kn''' persistent setting; can be default 0 (use I value) or 1 (ignore I1 and always act with I0)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40<br />
<br />
This happens (for every head loaded) when you click print, and the head values are sent to the Motion Controller.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** (no move)<br />
<br />
'''Example'''<br />
<br />
M6 T# O1 X20 Y-30 Z40 I1<br />
<br />
This happens when you execute a tool change with '''T#''', and so it triggers the move ('''I1''') to properly position the next head.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** '''T#''' (target head) <br />
** '''O1''' (offset stored in register "O1") <br />
** '''X20''' (X+20)<br />
** '''Y-30''' (Y-30)<br />
** '''Z40''' (Z+40)<br />
** (no change to A)<br />
** (no change to B)<br />
** (no diameter change)<br />
** '''I1''' (store and move distances)<br />
<br />
'''Example'''<br />
<br />
M6 K1<br />
<br />
You might include this in your header to change behavior during tool changes.<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M6''' (Declare Head Offsets) <br />
** (all future T# or M6 commands) <br />
** (no offset registers, so ignore all offsets)<br />
** '''K1''' (always force I0 with M6 unless K0 present (or has been previously set)<br />
<br />
Note that this differs from a G54-G59, where the offsets are applied to EVERY tool position.<br />
<br />
<br><br />
<hr><br />
<br />
=== M660 Assign Tool Height Offset ===<br />
<br />
Used with the High Resolution Engine (and other units which home away from O, like a CNC), an M660 declares that a particular head, when called upon, should print at the gcode-based Z position MODIFIED by this offset, since on these units, the Z-Zero is often BELOW the print surface. By default, this is ONLY used on the EHR (Engine, High Resolution)<br />
<br />
NOTE: You MUST have a '''G28 Z0''' in your header to run this M660 on the EHR.<br />
<br />
'''Usage'''<br />
<br />
M660 Hn Zn<br />
(followed by)<br />
G1 Xn Yn Zn Fn Hn (see '''[[#G1_Working_Move]]''' for other details<br />
<br />
'''Parameters'''<br />
<br />
'''H''' is the head offset register for which these offsets are being set;<br />
'''Z''' is the offset in the Z axis in mm.<br />
<br />
'''Example 1'''<br />
<br />
M660 H2 Z28.2 ; (specified before any moves)<br />
(followed by)<br />
G1 X50 Y75 F4800 H2 ; (specified on the first G1 move)<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M660''' (apply offset) <br />
** '''H2''' (store in register 2)<br />
** '''Z28.2''' (+28.2 to Z position)<br />
* (there may be more commands before the G1 move invoking the H2)<br />
* '''G1''' (working speed straight line move from the current location to) <br />
** '''X50''' (50mm in the X) <br />
** '''Y75''' (75mm in the Y) <br />
** (no change in Z)<br />
** '''E1''' (while extruding) <br />
** '''F1800''' (moving at 1800mm/min)<br />
** '''H2''' (invoke offsets stored in register H2)<br />
<br />
To be clear, this requires editing two lines of code:<br />
<br />
In your gcode, you will enter the M660 just before the first layer code. Example: <code>M660 H2 Z28.2 ; set tool height for tool two (Z offset)</code>. On the first move of layer one (usually the Z move), you will add an <code>H</code> value so that this tool height is invoked. <br />
<br />
'''Example 2'''<br />
<br />
Before editing: <br />
<br />
G1 Z0.275 F360 ; move to next layer (0)<br />
(followed by)<br />
G1 X50 Y75 F4800<br />
<br />
After editing:<br />
<br />
G1 Z0.275 F360 '''H2''' ; move to next layer (0) and invoke head Z offset for this tool</code><br />
(followed by)<br />
G1 X50 Y75 F4800 '''H2'''<br />
<br />
<br><br />
<hr><br />
<br />
=== M703 Cloning Heads ===<br />
<br />
Clone, slave, or parallel printing, is when multiple heads make the ''exact same print'' at the same time.<br />
<br />
Usage of these commands with version 4 and earlier is explained in detail at '''https://hyrel3d.com/wiki/index.php/Cloning_and_Mixing'''.<br />
<br />
<br><br />
<hr><br />
<br />
=== T Tool Change===<br />
<br />
T executes a tool change, invoking the parameters specified in the M6 sent from Repetrel to the printer at the job start. Do not confuse a T command with a T variable.<br />
<br />
'''See the first entry on this page for details. '''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Lasers and UV Pens''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Lasers and UV Pens<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|--<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M621_Set_Laser_Power|M621]] <br />
| Yes || Set Laser Power<br />
|-<br />
! [[#M623_Duration_Emit|M623]] <br />
| Yes || Duration Emit<br />
|-<br />
| colspan="3" | [[#Laser_Examples|Laser Examples]]<br />
|-<br />
| colspan="3" | [[#UV_Pen_Examples|UV Pen Examples]]<br />
|}<br />
<br />
<br />
The CO<sub>2</sub> and Diode Lasers and the UV Pens require the following enabling codes:<br />
<br />
=== M620 Enable Device ===<br />
<br />
M620 enables the device.<br />
<br />
'''Usage'''<br />
<br />
M620 T# En An<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool position<br />
'''En''' can be the default 0 (disable) or 1 (enable)<br />
'''An''' is the duration in seconds after shut-off that the cooling remains active; default is 30 (but this will not override temperature safety measures)<br />
<br />
'''Example'''<br />
<br />
M620 T# E1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M620''' (enable device) <br />
** '''T#''' (target head - MUST be specified, can NOT be inherited)<br />
** '''E1''' (enable)<br />
<br />
<br><br />
<hr><br />
<br />
=== M621 Set Laser Power ===<br />
<br />
M621 sets the power for the LASER (not other heads).<br />
<br />
'''Usage'''<br />
<br />
M621 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
'''Dn''' is the initial power (similar to a prime) to penetrate material (optional; uses Pn if unspecified)<br />
<br />
Note: No tool is specified; this will happen on the laser already enabled with M620.<br />
<br />
'''Example'''<br />
<br />
M621 P40<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M621''' (activate device) <br />
** '''P40''' (at 40% during "printing" (E-value) moves)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
=== M623 Duration Emit ===<br />
<br />
M623 sets the power for the laser or UV pen, and takes the following parameters:<br />
<br />
'''Usage'''<br />
<br />
M623 Dn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Dn''' is the duration, in miliseconds (only used for static exposures, not during moves)<br />
'''Pn''' is the power, in a value between 0 (min) and 100 (max).<br />
<br />
Note: Dn max for UV pens is 60,000 (1 minute); Dn max for other devices 1,000 (1 second); <br />
<br />
Here are examples:<br />
<br />
M623 P80 D500<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D500''' (duration 500 miliseconds)<br />
<br />
M623 P80 D10000 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M623''' (activate tool) <br />
** '''P80''' (power 80%) <br />
** '''D10000''' (duration 10 seconds)<br />
<br />
=== Emitting Move Example for the Laser ===<br />
<br />
A sample of code for lasering will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device <br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your lasering job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
=== Emitting Move Example for the UV Pen ===<br />
<br />
A sample of code for UV Curing will look like this:<br />
<br />
G0 X100 Y100 F1000 ; move to start location at 1000 mm/min<br />
M620 T# E1 ; enable target device<br />
M621 P100 ; set light emission in vector mode (slot 3) to full power (100%)<br />
T# ; toolchange to target head<br />
G1 X120 Y100 E1 ; emitting (printing) move 20mm from origin in X axis<br />
G1 X120 Y120 E1 ; emitting (printing) move 20mm from origin in Y axis<br />
G1 X120 Y130 ; non-emitting move 10mm from origin in Y axis<br />
G1 X140 Y130 E1 ; emitting move 20mm from origin in X axis<br />
<br />
... (the rest of your curing job)<br />
<br />
M620 T# E0 ; disable target device <= should be before M30 command<br />
<br />
For more complex examples, see the '''[[UV_and_Clench]]''' page.<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Spindles and Lathes''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Spindles and Lathes<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M3_Turn_On_Spindle_.28CW.29|M3]] <br />
| Yes || Spindle On CW<br />
|-<br />
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]] <br />
| Yes || Spindle On CCW<br />
|-<br />
! [[#M5_Turn_Off_Spindle|M5]] <br />
| Yes || Spindle Off<br />
|-<br />
! [[#M253_Turn_On_Lathe_.28CW.29|M253]] <br />
| Yes || Turn On Lathe (CW)<br />
|-<br />
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]] <br />
| Yes || Turn On Lathe (CCW)<br />
|-<br />
! [[#M255_Turn_Off_Lathe|M255]] <br />
| Yes || Turn Off Lathe<br />
|-<br />
! [[#G81_Peck_Drilling|G81]] <br />
| G81 || Peck Drilling<br />
|-<br />
|}<br />
<br />
Machining and Spindle Tool commands. Note, we recommend using [http://mr-soft.net/ SimplyCAM].<br />
<br />
You can review the 5-axis gcode we used for [https://www.youtube.com/watch?v=B0lvN-aPYHI this video] from [http://hyrel3d.net/downloads/gcode/Ardes_tube_cap_milling.gcode here].<br />
<br />
=== M3 Turn On Spindle (CW) ===<br />
<br />
M3 tells the printer to activate (start) the spindle motor in the clockwise direction on the current head (if it has one), using the value set on the head for RPM. Note: S0 is the same as turning it off. Note: DO NOT CHANGE DIRECTION while the spindle is in motion.<br />
<br />
'''Usage'''<br />
<br />
M3 T# Sn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Sn''' - power (0-100%)<br />
'''Fn''' - optional; PWM in Hz (defaults on heads should be fine for most uses)<br />
<br />
'''Example'''<br />
<br />
M3 T# S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (activate spindle clockwise)<br />
** '''T#''' (target head)<br />
** '''S75''' (at 75% power) <br />
** (default PWM)<br />
<br />
<br><br />
<hr><br />
<br />
=== M4 Turn On Spindle (CCW) ===<br />
<br />
Please refer to M3, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M5 Turn Off Spindle ===<br />
<br />
M5 tells the printer to deactivate (stop) the spindle motor on the current head (if it has one). M5 has the same effect as M3 S0 or M4 S0.<br />
<br />
'''Usage'''<br />
<br />
M5 T#<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
<br />
'''Example'''<br />
<br />
M5 T# <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M3''' (deactivate spindle )<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
=== M253 Turn On Lathe (CW) ===<br />
<br />
M253 tells the printer to activate (start) the lathe motor in the clockwise direction (if it has one), using the value set with M92 for RPM. Only available on Hydra 16A models.<br />
<br />
Note: S0 is the same as turning it off. <br />
<br />
'''Usage'''<br />
<br />
M253 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' - speed in units per minute (default: RPM if set with M92 as steps per revolution)<br />
<br />
'''Example'''<br />
<br />
M253 S75<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M253''' (activate spindle clockwise)<br />
** '''S75''' (at 75 RPM) <br />
<br />
<br><br />
<hr><br />
<br />
=== M254 Turn On Lathe (CCW) ===<br />
<br />
Please refer to M253, above, for details. All options are identical, with the exception of direction (counterclockwise).<br />
<br />
<br><br />
<hr><br />
<br />
=== M255 Turn Off Lathe ===<br />
<br />
M255 tells the printer to deactivate (stop) the lathe motor (if it has one). M255 has the same effect as G253 S0 or G254 S0.<br />
<br />
'''Usage'''<br />
<br />
M255 <br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M255 <br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M255''' (deactivate lathe)<br />
<br />
<br><br />
<hr><br />
<br />
=== G81 Peck Drilling ===<br />
<br />
G81 tells the printer to move to a start position in X/Y and then in Z, and to make (if needed) repeated descents and retracts. This is used to make holes, especially deep holes. Note that the spindle tool is turned on with an M3 or M4 before this command, and turned off with an M5 after all work is done.<br />
<br />
'''Usage'''<br />
<br />
G81 T# Xn Yn In Pn Qn Zn Fn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Xn''' - X position<br />
'''Yn''' - Y position<br />
'''In''' - initial Z position<br />
'''Pn''' - peck downward this many mm during each cycle<br />
'''Qn''' - retract upward this many mm after each cycle (to clear debris)<br />
'''Zn''' - maximum pecking depth<br />
'''Fn''' - Z working speed in mm/min<br />
<br />
'''Example'''<br />
<br />
G81 T# X100 Y75 I3 P3 Q-2 Z-7.5 F200<br />
<br />
''NOTE that an M660 offset must be set and applied BEFORE THIS COMMAND to allow for tool length.''<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''G81''' (begin pecking cycle) <br />
** '''X100 Y75''' (move to X/Y starting position X100 Y75) <br />
** '''I3''' (move to Z starting position Z3, which will be our greatest retract height) <br />
** '''P3''' (peck downward an additional 3mm at a time)<br />
** '''Q-2''' (retract upward 2mm after each peck (to clear debris))<br />
** '''Z-7.5''' (peck to a maximum depth of 7.5mm)<br />
** '''F200''' (working (drilling) travel speed of 200 mm/min)<br />
** ''after this, the head will retract up to the I position (Z3 in this case) before moving on to the next line''<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Reporting and Diagnostics''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Reporting and Diagnostics<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M701_Set_Head_Reporting|M701]] <br />
| Yes || Set Head Reporting<br />
|-<br />
! [[#M718_Stop_Logging_to_File|M718]] <br />
| Yes || Stop Logging to File<br />
|-<br />
! [[#M719_Start_Logging_to_File|M719]] <br />
| Yes || Start Logging to File<br />
|-<br />
! [[#M670_M670_Enable_Gantry_/_Y-arm_Light|M670]] <br />
| Yes || Enable Y-arm Light<br />
|- || Activate Danger Light<br />
|-<br />
! [[#M672_Set_Y-arm_Light|M672]] <br />
| Yes || Set Y-arm Light<br />
|-<br />
! [[#M772_Reset_All_Metrics|M772]] <br />
| Yes || Reset All Metrics<br />
|-<br />
! [[#M773_Generate_Basic_Report|M773]] <br />
| Yes || Generate Basic Report<br />
|-<br />
|}<br />
<br />
The following commands help with reporting and diagnostics. Most users never need them, but here are the basics. More advanced/detailed reporting is available.<br />
<br />
=== M701 Set Head Reporting ===<br />
<br />
M701 tells heads how often to send head-specific information to the Motion Controller and on to Repetrel (and pass along to a text file if enabled via M719).<br />
<br />
'''Usage'''<br />
<br />
M701 T# Pn<br />
<br />
'''Parameters'''<br />
<br />
'''T#''' - target head<br />
'''Pn''' - period in seconds between entries (default 1)<br />
<br />
'''Example'''<br />
<br />
M701 P12<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M701''' (head reporting) <br />
** (currently active head)<br />
** '''P12''' (every 12 seconds)<br />
<br />
<br><br />
<hr><br />
<br />
=== M718 Stop Logging to File ===<br />
<br />
M718 tells Repetrel to stop any logging of data to text file that may have been enabled with M719.<br />
<br />
'''Usage'''<br />
<br />
M718<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M718<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M718''' (logging off) <br />
<br />
<br><br />
<hr><br />
<br />
=== M719 Start Logging to File ===<br />
<br />
M719 tells the Motion Controller what system-wide information to report back to Repetrel, and also tells Repetrel to begin logging these details to a text file.<br />
<br />
'''Usage'''<br />
<br />
M719 Pn Sn <br />
<br />
M719 Pn Xn Yn Zn An Bn Vn En Ln<br />
<br />
'''Parameters'''<br />
<br />
'''Pn''' - period in seconds between entries<br />
'''Sn''' - can be default 0 (see options below) or 1 (report ALL data) <br />
'''Xn''' - report X position with each entry<br />
'''Yn''' - report Y position with each entry<br />
'''Zn''' - report Z position with each entry<br />
'''An''' - report A position with each entry<br />
'''Bn''' - report B position with each entry<br />
'''Vn''' - report velocity with each entry<br />
'''En''' - report flow rate with each entry<br />
'''Ln''' - report gcode line number with each entry<br />
<br />
Note: these values are persistent, and if previously enabled, will still be enabled unless disabled with a 0 parameter.<br />
<br />
'''Example 1'''<br />
<br />
M719 P10 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M719''' (logging on)<br />
** '''P10''' (every 10 seconds)<br />
** '''S1''' (report everything)<br />
<br />
'''Example 2'''<br />
<br />
M719 P.1 Xn Yn Zn Ln<br />
<br />
* '''M719''' (logging on)<br />
** '''P.1''' (every 0.1 seconds)<br />
** '''X1''' (report X position)<br />
** '''Y1''' (report Y position)<br />
** '''Z1''' (report Z position)<br />
** (don't report A position)<br />
** (don't report B position)<br />
** (don't report velocity)<br />
** (don't report flow rate)<br />
** '''L1''' (report line number)<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Enable Gantry / Y-arm Light ===<br />
<br />
M670 sets the intensity of the Y-arm LEDs.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn Pn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the (percent of duty cycle, 0-100) for the LEDs<br />
'''Pn''' is the period (on-off interval - default is 1 second)<br />
<br />
'''Example 1'''<br />
<br />
M670 S50 P1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S50''' (50% duty cycle)<br />
** '''P1''' (1 second cycle)<br />
<br />
This would turn the Y-arm light on for 50% of 1 second, then off for 50% of 1 second - or on for 0.5 seconds, off for 0.5 seconds.<br />
<br />
'''Example 2'''<br />
<br />
M670 S25 P4<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (enable Y-arm light)<br />
** '''S25''' (25% duty cycle)<br />
** '''P4''' (4 second cycle)<br />
<br />
This would turn the Y-arm light on for 25% of 4 second, then off for 75% of 4 seconds - or on for 1 second, off for 3 seconds.<br />
<br />
<br><br />
<hr><br />
<br />
=== M672 Set Gantry / Y-arm State ===<br />
<br />
M672 can be used to have the Gantry / Y-arm light change states to reflect the state of a sensor. For example, you can have it come on when the X axis is homed, or when the Y axis has a fault.<br />
<br />
'''Usage'''<br />
<br />
M672 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' can be (unlisted numbers are unused at present):<br />
'''0''' : Normal on/off<br />
'''10''' : X Home<br />
'''11''' : X Limit1<br />
'''12''' : X Limit2<br />
'''13''' : X Fault<br />
'''20''' : Y Home<br />
'''21''' : Y Limit1<br />
'''22''' : Y Limit2<br />
'''23''' : Y Fault<br />
'''30''' : Z Home<br />
'''31''' : Z Limit1<br />
'''32''' : Z Limit2<br />
'''33''' : Z Fault<br />
'''40''' : A Home<br />
'''41''' : A Limit1<br />
'''42''' : A Limit2<br />
'''43''' : A Fault<br />
'''50''' : B Home<br />
'''11''' : B Limit1<br />
'''52''' : B Limit2<br />
'''53''' : B Fault<br />
'''60''' : C Home<br />
'''61''' : C Limit1<br />
'''62''' : C Limit2<br />
'''63''' : C Fault<br />
<br />
'''Example'''<br />
<br />
M672 S<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M672''' (map Y-arm light to state of sensor)<br />
<br />
<br><br />
<hr><br />
<br />
=== M772 Reset All Metrics ===<br />
<br />
M772 will reset all internal gathering registers to '''0'''.<br />
<br />
'''Usage'''<br />
<br />
M772 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' 0 is default; S can be...<br />
'''0''' reset all values only<br />
'''1''' also generates a basic printing report<br />
'''255''' also generates all possible reports (helpful for advanced debugging)<br />
<br />
'''Example'''<br />
<br />
M772 S1<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M772''' (reset all metrics)<br />
** '''S1''' (and generate basic printing report<br />
<br />
<br><br />
<hr><br />
<br />
=== M773 Generate Basic Report ===<br />
<br />
M773 generates a basic report of printing statistics (including average speed, number of primes, etc.)<br />
<br />
Note: this report will be more meaningful if you use '''M772''' to reset these counters at the start of a job.<br />
<br />
'''Usage'''<br />
<br />
M773<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M773<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M773''' (generate basic report)<br />
<br />
'''Sample Output'''<br />
<br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** Begin M773 - print job metrics Report<br />
>IN: 50: ******************************************************************<br />
>IN: 50: <br />
>IN: 50: Time (s) Dist (m)<br />
>IN: 50: -------- --------<br />
>IN: 50: Totals: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Printing moves: 0.0 0.000<br />
>IN: 50: Non-printing moves 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: Accelerating: 0.0 0.000<br />
>IN: 50: Cruising: 0.0 0.000<br />
>IN: 50: Decelerating: 0.0 0.000<br />
>IN: 50: <br />
>IN: 50: can e steps issued: 0<br />
>IN: 50: approx filament (PI*d) 0.000 m<br />
>IN: 50: approx filament (PIr^2) 0.000 m<br />
>IN: 50: unprimes issued: 0<br />
>IN: 50: primes issued: 0<br />
>IN: 50: unprime-primes avoided: 0<br />
>IN: 50: <br />
>IN: 50: ******************************************************************<br />
>IN: 50: ** End M773 Report<br />
>IN: 50: ******************************************************************<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Controlling Aux Devices''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Controlling Aux Devices<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M7_Set_Power_On_Aux_1|M7]] <br />
| Yes || Aux 1 On (Mist)<br />
|-<br />
! [[#M8_Set_Power_On_Aux_2|M8]] <br />
| Yes || Aux 2 On (Flood)<br />
|-<br />
! [[#M9_Turn_Off_All_Aux|M9]] <br />
| Yes || All Aux Off<br />
|-<br />
! [[#M620_Enable_Device|M620]] <br />
| Yes || Enable Device<br />
|-<br />
! [[#M670_Activate_Y-Arm_.28Gantry.29_Lights|M670]] <br />
| Yes || Enable Y-arm (Gantry) Lights<br />
|-<br />
! [[#M671_Activate_X-Arm_.28Danger.29_Lights|M671]] <br />
| Yes || Activate X-Arm (Danger) Lights<br />
|-<br />
! [[#M675_Activate_Response_LEDs|M675]] <br />
| Yes || Activate Response LEDs<br />
|-<br />
! [[#M676_Activate_Recirc._Fan|M676]] <br />
| Yes || Activate Recirc. Fan<br />
|-<br />
! [[#M677_Activate_Buzzer|M677]] <br />
| Yes || Activate Buzzer<br />
|-<br />
! [[#M678_Activate_Laser_X-hair|M678]] <br />
| Yes || Activate Laser X-hair<br />
|-<br />
! [[#M679_Activate_Vacuum|M679]] <br />
| Yes || Activate Vacuum<br />
|-<br />
! [[#M684_Activate_Exhaust|M684]] <br />
| Yes || Activate Exhaust<br />
|-<br />
! [[#M685_Set_Power_on_Air|M685]] <br />
| Yes || Activate Air<br />
|-<br />
! [[#M689_Activate_Ext._Head|M689]] <br />
| Yes || Activate Ext. Head<br />
|-<br />
! [[#M783_Tie_Aux_to_Extrusion|M783]] <br />
| Yes || Tie Aux to Extrusion<br />
|-<br />
|}<br />
<br />
<br />
Individual port control commands.<br />
<br />
=== M7 Activate Aux 1 ===<br />
<br />
[[File:M7m8m9_ehr.jpg|thumb|12VDC Ports on EHR|right]]<br />
<br />
[[File:M7m8m9_30m_esr.jpg|thumb|12VDC Ports on 30M, ESR|right]]<br />
<br />
M7 sends 12VDC to the port associated with "Mist Coolant", which we sometimes call Aux1. With no parameters, it is read as M7 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M7 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 1 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 1 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M7 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M7 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M7 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''S0''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M7 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M7''' (Aux1 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M8 Activate Aux 2 ===<br />
<br />
M7 sends 12VDC to the port associated with "Flood Coolant", which we sometimes call Aux2. With no parameters, it is read as M8 S100 (on continuously). See also [[#M783_Tie_Aux_to_Extrusion|'''M783''' Tie Aux to Extrusion]].<br />
<br />
'''Usage'''<br />
<br />
M8 Sn Tn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100) for Aux 2 to come on (default is 100)<br />
'''Tn''' is the head to which Aux 2 will synchronize, coming on at 100% when that head is extruding; using a '''T''' value forces '''S100'''<br />
<br />
'''Example 1'''<br />
<br />
M8 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M8 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M8 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''S''' (set to 0%)<br />
<br />
'''Example 4'''<br />
<br />
M8 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M8''' (Aux2 value) <br />
** '''T#''' (set to 100% when T# is extruding)<br />
<br />
<br><br />
<hr><br />
<br />
=== M9 Deactivate Aux1 & Aux2 ===<br />
<br />
M9 cuts power to both Aux1 and Aux2. It is equivalent to running M7 S0 and M8 S0.<br />
<br />
'''Usage'''<br />
<br />
M9<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M9<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M9''' (set Aux 1 and Aux 2 to value 0 (off)) <br />
<br />
<br><br />
<hr><br />
<br />
=== M620 Activate Emitter ===<br />
<br />
See [[#M620_Enable_Device]] above.<br />
<br />
<br><br />
<hr><br />
<br />
=== M670 Activate Y-Arm (Gantry) Lights ===<br />
<br />
M670 sends 12VDC to the port associated turning on the Gantry (16A) or Y-arm (30M, ESR) lights.<br />
<br />
'''Usage'''<br />
<br />
M670 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M670 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M670 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M670 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M670''' (Gantry / Y-arm value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M671 Activate X-Arm (Danger) Lights ===<br />
<br />
M671 sends 12VDC to the port associated turning on the X-arm / Danger lights (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M671 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M671 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M671 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M671''' (X-arm / Danger value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M675 Activate Response LEDs ===<br />
<br />
M675 sends 12VDC to the port associated turning on the Response LEDs (30M/16A only).<br />
<br />
'''Usage'''<br />
<br />
M675 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M675 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M675 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M675 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M675''' (Response LEDs value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M676 Activate Recirc. Fan ===<br />
<br />
M676 sends 12VDC to the port associated turning on the Recirc. Fan (16A only).<br />
<br />
'''Usage'''<br />
<br />
M676 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M676 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M676 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M676 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M676''' (Recirc. Fan value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M677 Activate Buzzer ===<br />
<br />
M677 sends 12VDC to the port associated turning on the Buzzer (older 30Ms only).<br />
<br />
'''Usage'''<br />
<br />
M677 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M677 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M677 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M677 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M677''' (Buzzer value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M678 Activate Laser X-hair ===<br />
<br />
M678 sends 12VDC to the port associated turning on the Laser X-hair (16A with CO<sub>2</sub> lasers only).<br />
<br />
'''Usage'''<br />
<br />
M678 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M678 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M678 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M678 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M678''' (Laser X-hair value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
<br><br />
<hr><br />
<br />
=== M679 Activate Vacuum ===<br />
<br />
M679 sends 12VDC to the port associated turning on the Vacuum (30M/ESR only).<br />
<br />
'''Usage'''<br />
<br />
M671 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M679 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M679 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M679 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M679''' (Vacuum value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M684 Activate Exhaust ===<br />
<br />
M671 sends 12VDC to the port associated turning on the Exhaust (16A only).<br />
<br />
'''Usage'''<br />
<br />
M684 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M684 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M684 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M684 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M684''' (Exhaust value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M685 Set Power on Air ===<br />
<br />
M685 sends 12VDC to the port associated turning on the (positive pressure) Air (16A only).<br />
<br />
'''Usage'''<br />
<br />
M685 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M685 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M685 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' Air value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M685 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M685''' (Air value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M689 Activate Ext. Head ===<br />
<br />
M689 sends 12VDC to the port associated turning on the Ext. Head.<br />
<br />
'''Usage'''<br />
<br />
M689 Sn<br />
<br />
'''Parameters'''<br />
<br />
'''Sn''' is the percentage (0-100; no default - if no Sn, no change)<br />
<br />
'''Example 1'''<br />
<br />
M689 S100<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S100''' (set to 100%)<br />
<br />
'''Example 2'''<br />
<br />
M689 S25<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S25''' (set to 25%)<br />
<br />
'''Example 3'''<br />
<br />
M689 S0<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M689''' (Ext. Head value) <br />
** '''S0''' (set to 0%)<br />
<br />
<br><br />
<hr><br />
<br />
=== M783 Tie Aux to Extrusion ===<br />
<br />
M783 can tie some auxiliary port (like Aux 1, normally controlled by M7, or Aux 2, normally controlled by M8, etc.) to be powered (at 100%) during a certain head's extrusion. Some users use this so that they can print with Ultimus or Viscotec heads on our equipment. See also [[#M7_Set_Power_On_Aux_1|M7]] and [[#M8_Set_Power_On_Aux_2|M8]].<br />
<br />
Note: M619 can be used to map which port M783 ties to - contact us for more information.<br />
<br />
'''Usage'''<br />
<br />
M783 T# <br />
<br />
'''Parameters'''<br />
<br />
'''T#''' is the tool to which the designated aux port will be tied<br />
<br />
'''Example'''<br />
<br />
M783 T#<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M783''' (Tie current Aux port to status of head)<br />
** '''T#''' (target head)<br />
<br />
<br><br />
<hr><br />
<br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== '''Other Commands''' ==<br />
<br />
{| border="1" class="wikitable" style="float:right"<br />
! colspan="3" | Other Commands<br />
|-<br />
! Code<br />
! Supported<br />
! Brief Description<br />
|-<br />
! [[#M17_Engage_Motors|M17]] <br />
| Yes || Engage Motors<br />
|-<br />
! [[#M18_Disengage_Motors|M18]] <br />
| Yes || Disengage Motors<br />
|-<br />
! [[#M30_End_of_Program|M30]] <br />
| Yes || End of Program<br />
|-<br />
! [[#M84_Disable_Motors|M84]] <br />
| Yes || Disable Motors<br />
|-<br />
! [[#M790_New_Layer_Actions|M790]] <br />
| Yes || New Layer Actions<br />
|-<br />
! [[#M791_Snap_Image|M791]] <br />
| Yes || Snap Image<br />
|-<br />
! [[#M792_Execute_Action|M792]] <br />
| Yes || Execute Action<br />
|-<br />
|}<br />
<br />
Other commands.<br />
<br />
=== M17 Engage Motors ===<br />
<br />
M17 will apply power to all motors (positioning and extruder motors), locking them at their current postion; this prevents the bed and yoke from being pushed manually in the X and Y. <br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M17<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M17<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M17''' (engage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M18 Disengage Motors ===<br />
<br />
M18 will cut power to all motors (positioning and extruder motors), unlocking them; this allows the motors to cool down (as they normally lock in place while still), as well as allowing one to manually push the bed and yoke in the X and Y. It also notifies the GUI that motors are disabled. All axes with homes must be rehomed after an M18.<br />
<br />
Note this is identical to '''M84''' and the opposite of '''M17'''.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
'''Usage'''<br />
<br />
M18<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M18<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M18''' (disengage motors) <br />
<br />
<br><br />
<hr><br />
<br />
=== M30 End of Program ===<br />
<br />
M30 tells the printer that this job is complete. No gocde after an M30 will be executed as part of the previous job.<br />
<br />
Note M30 also dissolves any cloning setups, changes head index to 0, clears fixture offsets (G53), clears any M229 E-value settings, resets M106 persistent range, resets any printing errors, resets M660 head offsets to 0, resets heads to their stored values, and triggers any queued reports.<br />
<br />
'''Usage'''<br />
<br />
M30<br />
<br />
'''Parameters'''<br />
<br />
N/A<br />
<br />
'''Example'''<br />
<br />
M30<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M30''' (end or program) <br />
<br />
<br><br />
<hr><br />
<br />
=== M84 Disable Motors ===<br />
<br />
M84 invokes an M18. Please see M18 for usage.<br />
<br />
Note that an '''M18''' or '''M84''' will disengage motors on ESR and 30M models, but 16A and EHR models use different controllers, and these commands do not unlock the motors. On a 16A or a 30M, you may engage the emergency stop for the same effect.<br />
<br />
<br><br />
<hr><br />
<br />
=== M790 New Layer Actions ===<br />
<br />
M790 will trigger any associated new layer actions, which can include capturing an image from the designated camera. It takes no parameters.<br />
<br />
=== M791 Snap Image ===<br />
<br />
M791 will cause the camera selected under the Interface > Camera1 tab, if set to live video, to capture an image and save it to <code>C:\Users\hyrel\Pictures\HyrelPrinterPictures\Camera1</code>, named <code>pic#.png</code><br />
<br />
=== M792 Execute Action ===<br />
<br />
M792 causes Repetrel to perform an action, such as displaying an image or making a warning beep.<br />
<br />
'''Usage'''<br />
<br />
M792 [ SAY | PIC | VID | SEND | BEEP | SHELL ]<br />
<br />
'''Parameters'''<br />
<br />
'''SAY sample message''' - the computer will use built-in text-to-speech to echo the message over the speaker(s)<br />
'''PIC C:\sample.jpg''' - the computer will display the image at the specified location<br />
'''VID C:\sample.mp4''' - the computer will play the video at the specified location<br />
'''SEND sample message''' - the computer will send the message to the Aux port if connected<br />
'''BEEP''' - the computer will sound a beep<br />
'''SHELL C:\program.exe''' - the computer will execute the file at the specified location<br />
<br />
Note that multiple options can be combined.<br />
<br />
'''Example'''<br />
<br />
M792 ; SAY Hello Wilbur ; PIC C:\mr_ed.png<br />
<br />
This command is decoded and executed by the printer as follows:<br />
<br />
* '''M792''' (execute action) <br />
** '''SAY Hello Wilbur''' (Announce Text: Hello Wilbur)<br />
** '''PIC C:\mr_ed.png''' (Display Image: C:\mr_ed.png)<br />
<br />
<br><br />
<hr><br />
<br />
'''[[#What_is_GCode.3F|Back to top]]'''<br />
<br />
== Gcode Header ==<br />
<br />
Here are some sample headers for Gcode on our equipment:<br />
<br />
=== 16A, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
M190 S100 ; bed preheat : set and wait<br />
M140 S[bed_temperature] ; bed temp : set, no wait<br />
M104 T12 S[temperature] ; head temp : set, no wait<br />
<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M190 S[bed_temperature] ; bed temp : set and wait<br />
M109 T12 S[temperature] ; head temp : set and wait<br />
<br />
T1 ; use SECOND tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 16A with a Heated Head in T1/T12 - 2021.02.24 ///////////////</code><br />
<br />
=== 30M and ESR, T1, Heated ===<br />
<br />
Below is our standard header for using a heated head in the second slot with a heated bed on a 16A:<br />
<br />
; /////////////// BEGIN HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 \\\\\\\\\\\\\\\<br />
<br />
; GENERAL :<br />
<br />
N14 ; set line numbers for error logging - Slic3r version<br />
M772 S1 ; reset metrics and arm automatic reporting <br />
M627 X0 Y0 Z0 J-500 K5 ; setup abort action <br />
<br />
<br />
M107 ; fans/UV ; off<br />
M106 C255 ; fans/UV ; set to 0-255 range<br />
<br />
G53 ; clear offsets<br />
G21 ; units : mm<br />
G91 ; coordinatess : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
<br />
G28 Z0 ; home, goto : Z (ignored if no Z home)<br />
G28 X0 Y0 ; home, goto : X and Y<br />
<br />
M229 E1 D1 ; enable E-values (volumetric)<br />
<br />
; TEMP CONTROL :<br />
<br />
;M190 S[bed_temperature] ; bed temp : set and wait <= COMMENTED OUT<br />
;M109 T11 S[temperature] ; head temp : set and wait <= COMMENTED OUT<br />
<br />
T0 ; use FIRST tool position from the left <br />
<br />
; \\\\\\\\\\\\\\\ END HYREL HEADER for a 30M/ESR with an Unheated Head in T0/T11 - 2021.02.24 ///////////////<br />
<br />
== Gcode Footer ==<br />
<br />
=== Standard, All Models ===<br />
<br />
Below is our standard Gcode footer, which should be at the end of all your gcode files:<br />
<br />
; /////////////// BEGIN HYREL STANDARD FOOTER - 2021.02.12 \\\\\\\\\\\\\\\<br />
<br />
; temp control:<br />
<br />
<br />
M107 T100 ; fans, diodes : off<br />
M620 T100 E0 ; CO2 lasers ; off<br />
M104 T100 S0 ; head temps : off<br />
M140 T90 S0 ; bed temps : off<br />
M5 ; spindles : off<br />
<br />
; housekeeping<br />
<br />
G91 ; coordinates : relative<br />
G0 Z10 ; drop bed <br />
G90 ; coordinates : absolute<br />
G0 Y0 ; home, goto : Y axis<br />
G0 X0 ; home, goto : X axis<br />
M84 ; motors : disable<br />
G53 ; clear offsets<br />
M30 ; program : end<br />
<br />
; \\\\\\\\\\\\\\\ END HYREL STANDARD FOOTER - 2021.02.12 ///////////////</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7761Published Papers2024-03-01T19:28:53Z<p>Davo: /* Count */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
506 documents as of 1 March, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7760Published Papers2024-03-01T19:28:33Z<p>Davo: /* FDM/HFF, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
505 documents as of 22 February, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Lasers&diff=7759Lasers2024-02-28T19:17:48Z<p>Davo: /* Diode Lasers */</p>
<hr />
<div>[[Category:Hardware]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== <span style="color: maroon;">Lasers: Exciting!</span> ==<br />
<br />
<span style="color: maroon;">'''''Also, dangerous.'''''</span><br />
<br />
<span style="color: maroon;">'''''Only safety-conscious adults with proper safeguards should operate lasers of any kind.'''''</span><br />
<br />
== CO<sub>2</sub> Lasers (DISCONTINUED) ==<br />
<br />
[[File:LI40.jpg]]<br />
<br />
Hyrel FORMERLY offered a 40w CO<sub>2</sub> laser on some of our Hydra 16A models.<br />
<br />
We recommended at least 500 cfm (850 m<sup>3</sup>/h) of exhaust while lasering.<br />
<br />
This information is preserved for customers who already own a CO2 laser on their Hyrel equipment.<br />
<br />
=== Hyrel Specific ===<br />
<br />
==== Settings ====<br />
<br />
Your acutal laser controller, on the Aux Heads tab, should be set to "Laser_40".<br><br />
Your safety/mirror/lens controller, on the Heads 1-5 tab, should be set to "CO2_Laser" or the newer "CO2_Lens".<br />
<br />
'''Z-zero should be set 8 mm from the bottom of the focusing lens hardware for the CO2 laser.'''<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 30%;" | Property<br />
! style="width: 20%;" | LI-40<br />
|-<br />
! Watts<br />
| ~40<br />
|-<br />
! Wavelength<br />
| 10,600 nm<br />
|-<br />
! Focused<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~8mm<br />
|-<br />
! Dot Size<br />
| ~400µm<br />
|-<br />
|}<br />
<br />
==== Videos ====<br />
<br />
*'''[https://www.youtube.com/watch?v=qBBxkx40H8s CO2 Laser Alignment]'''<br />
*[https://youtu.be/kqnjlTSg-20 CO2 Laser Marking with the Hydra]<br />
*[https://youtu.be/FnYDoNkgOrI Converting a Hydra from Printer to Laser]<br />
*[https://youtu.be/fHqTlcdISIg Cutting Nylon Mesh with CO2 Laser on a Hydra]<br />
*[https://youtu.be/4Y9V6RWhKj4 Cutting Acrylic with the CO2 Laser on a Hydrda]<br />
*[https://www.youtube.com/watch?v=WNr59eCGuK4 Changing the Address Resistor on the Hydra CO2 Laser]<br />
*[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel Hydra CO2 Laser Alignment]<br />
*[https://www.youtube.com/watch?v=WrImt7_Pnxo Flashing Firmware on the Modified CO2 Laser Controller]<br />
*[https://www.youtube.com/watch?v=GCzPw4FOG8c Draining Laser Coolant on the Hyrel Hydra]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
=== Laser Alignment ===<br />
<br />
[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel CO2 Laser Alignment Video.]<br />
<br />
Below are great videos about laser alignment in very similar setups:<br />
<br />
#[https://www.youtube.com/watch?v=Vl6QKlwRKlk RDWorks]<br />
#[https://www.youtube.com/watch?v=pw8Ro2vEEzY ThunderLaser]<br />
#[https://www.youtube.com/watch?v=wY5D27TQwZI BossLaser]<br />
#[https://www.youtube.com/watch?v=T9p-1AZKCVg MakeTech]<br />
<br />
=== Informational Videos ===<br />
<br />
Below are links to some VERY helpful videos from a gentleman named Russ, who purchased a laser engraver very similar to ours. In these videos, he shares his experiences, advice, and safety tips. While some of what Russ explains does not apply to using lasers on Hyrel equipment, much of it does. Please watch all these videos, even if you don't feel you need the information. Safety first!<br />
<br />
#[https://www.youtube.com/watch?v=YvrMeUUzaBo Introduction to Laser Cutting] <br />
#[https://www.youtube.com/watch?v=zF9nQHlvGkc Laser Theory and Safety Issues]<br />
#[https://www.youtube.com/watch?v=SGD8BPZntxY Software (n/a for Hyrel users)]<br />
#[https://www.youtube.com/watch?v=fA1jM9hTk6s Initial Setup and Powerup]<br />
#[https://www.youtube.com/watch?v=Zcze9B0BmpA Test Prints]<br />
#[https://www.youtube.com/watch?v=PUdEUxJH2_o Focal Distance and Power Analysis]<br />
#[https://www.youtube.com/watch?v=GNV0JUJXdvk Modifications and Recommendations from a Year of Use]<br />
<br />
== Diode Lasers ==<br />
<br />
[[File:LA5-6.jpg]]<br />
<br />
While less powerful than CO<sub>2</sub> lasers, diode lasers are still dangerous, and the same safety precautions apply.<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 20%;" | Property<br />
! style="width: 15%;" | LA5-808<br />
! style="width: 15%;" | LA6-405<br />
! style="width: 15%;" | LA6-450<br />
|-<br />
! Watts<br />
| ~5<br />
| ~6<br />
| ~6<br />
|-<br />
! Wavelength<br />
| 808<br />
| 405<br />
| 450<br />
|-<br />
! Columnated<br />
| FAC<br />
| No<br />
| No<br />
|-<br />
! Focused<br />
| Yes<br />
| Yes<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~100mm<br />
| ~18mm<br />
| ~18mm<br />
|-<br />
! Dot Size<br />
| ~250 µm<br />
| ~250 µm<br />
| ~250 µm<br />
|-<br />
! Pulsable<br />
| to 2 kHz<br />
| to 2 kHz<br />
| to 2 kHz<br />
|-<br />
! Best on<br />
| dark surfaces<br />
| light or <br> dark surfaces<br />
| light or <br> dark surfaces<br />
|-<br />
! 2024 Status:<br />
| ''Not Available''<br />
| ''Not Available''<br />
| Available<br />
|-<br />
|}<br />
<br />
'''Z-zero should be set 18 mm from the bottom of the focusing lens hardware for the Diode lasers.'''<br />
<br />
Hyrel offers diode lasers in several configurations:<br />
<br />
* The LA6-450, a 6 watt, 450 nanometer laser. [https://www.youtube.com/watch?v=OceUiuTixPA LA6-450 Intro Video]<br />
* The LA5-808, a 5 watt, 808 nanometer laser. [https://www.youtube.com/watch?v=0lpa4nENtyQ LA5-808 Intro Video]<br />
* The LA3-450, a 3 watt, 450 nanometer laser.<br />
<br />
More videos about the diode lasers:<br />
<br />
*[https://www.youtube.com/watch?v=C5-NYk06NVc Laser Marking on a Cylinder]<br />
*[https://www.youtube.com/watch?v=Tz6mRSkOaSk LA6-450 and LA5-808 Laser Overview]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
Manuals are available on the '''[[Manuals]]''' page, or in Repetrel under HELP > Accessory Manuals</div>Davohttps://hyrel3d.com/wiki/index.php?title=Lasers&diff=7758Lasers2024-02-28T19:16:48Z<p>Davo: /* Diode Lasers */</p>
<hr />
<div>[[Category:Hardware]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== <span style="color: maroon;">Lasers: Exciting!</span> ==<br />
<br />
<span style="color: maroon;">'''''Also, dangerous.'''''</span><br />
<br />
<span style="color: maroon;">'''''Only safety-conscious adults with proper safeguards should operate lasers of any kind.'''''</span><br />
<br />
== CO<sub>2</sub> Lasers (DISCONTINUED) ==<br />
<br />
[[File:LI40.jpg]]<br />
<br />
Hyrel FORMERLY offered a 40w CO<sub>2</sub> laser on some of our Hydra 16A models.<br />
<br />
We recommended at least 500 cfm (850 m<sup>3</sup>/h) of exhaust while lasering.<br />
<br />
This information is preserved for customers who already own a CO2 laser on their Hyrel equipment.<br />
<br />
=== Hyrel Specific ===<br />
<br />
==== Settings ====<br />
<br />
Your acutal laser controller, on the Aux Heads tab, should be set to "Laser_40".<br><br />
Your safety/mirror/lens controller, on the Heads 1-5 tab, should be set to "CO2_Laser" or the newer "CO2_Lens".<br />
<br />
'''Z-zero should be set 8 mm from the bottom of the focusing lens hardware for the CO2 laser.'''<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 30%;" | Property<br />
! style="width: 20%;" | LI-40<br />
|-<br />
! Watts<br />
| ~40<br />
|-<br />
! Wavelength<br />
| 10,600 nm<br />
|-<br />
! Focused<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~8mm<br />
|-<br />
! Dot Size<br />
| ~400µm<br />
|-<br />
|}<br />
<br />
==== Videos ====<br />
<br />
*'''[https://www.youtube.com/watch?v=qBBxkx40H8s CO2 Laser Alignment]'''<br />
*[https://youtu.be/kqnjlTSg-20 CO2 Laser Marking with the Hydra]<br />
*[https://youtu.be/FnYDoNkgOrI Converting a Hydra from Printer to Laser]<br />
*[https://youtu.be/fHqTlcdISIg Cutting Nylon Mesh with CO2 Laser on a Hydra]<br />
*[https://youtu.be/4Y9V6RWhKj4 Cutting Acrylic with the CO2 Laser on a Hydrda]<br />
*[https://www.youtube.com/watch?v=WNr59eCGuK4 Changing the Address Resistor on the Hydra CO2 Laser]<br />
*[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel Hydra CO2 Laser Alignment]<br />
*[https://www.youtube.com/watch?v=WrImt7_Pnxo Flashing Firmware on the Modified CO2 Laser Controller]<br />
*[https://www.youtube.com/watch?v=GCzPw4FOG8c Draining Laser Coolant on the Hyrel Hydra]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
=== Laser Alignment ===<br />
<br />
[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel CO2 Laser Alignment Video.]<br />
<br />
Below are great videos about laser alignment in very similar setups:<br />
<br />
#[https://www.youtube.com/watch?v=Vl6QKlwRKlk RDWorks]<br />
#[https://www.youtube.com/watch?v=pw8Ro2vEEzY ThunderLaser]<br />
#[https://www.youtube.com/watch?v=wY5D27TQwZI BossLaser]<br />
#[https://www.youtube.com/watch?v=T9p-1AZKCVg MakeTech]<br />
<br />
=== Informational Videos ===<br />
<br />
Below are links to some VERY helpful videos from a gentleman named Russ, who purchased a laser engraver very similar to ours. In these videos, he shares his experiences, advice, and safety tips. While some of what Russ explains does not apply to using lasers on Hyrel equipment, much of it does. Please watch all these videos, even if you don't feel you need the information. Safety first!<br />
<br />
#[https://www.youtube.com/watch?v=YvrMeUUzaBo Introduction to Laser Cutting] <br />
#[https://www.youtube.com/watch?v=zF9nQHlvGkc Laser Theory and Safety Issues]<br />
#[https://www.youtube.com/watch?v=SGD8BPZntxY Software (n/a for Hyrel users)]<br />
#[https://www.youtube.com/watch?v=fA1jM9hTk6s Initial Setup and Powerup]<br />
#[https://www.youtube.com/watch?v=Zcze9B0BmpA Test Prints]<br />
#[https://www.youtube.com/watch?v=PUdEUxJH2_o Focal Distance and Power Analysis]<br />
#[https://www.youtube.com/watch?v=GNV0JUJXdvk Modifications and Recommendations from a Year of Use]<br />
<br />
== Diode Lasers ==<br />
<br />
[[File:LA5-6.jpg]]<br />
<br />
While less powerful than CO<sub>2</sub> lasers, diode lasers are still dangerous, and the same safety precautions apply.<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 20%;" | Property<br />
! style="width: 15%;" | LA5-808<br />
! style="width: 15%;" | LA6-405<br />
! style="width: 15%;" | LA6-450<br />
|-<br />
! Watts<br />
| ~5<br />
| ~6<br />
| ~6<br />
|-<br />
! Wavelength<br />
| 808<br />
| 405<br />
| 450<br />
|-<br />
! Columnated<br />
| FAC<br />
| No<br />
| No<br />
|-<br />
! Focused<br />
| Yes<br />
| Yes<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~100mm<br />
| ~18mm<br />
| ~18mm<br />
|-<br />
! Dot Size<br />
| ~250 µm<br />
| ~250 µm<br />
| ~250 µm<br />
|-<br />
! Pulsable<br />
| to 2 kHz<br />
| to 2 kHz<br />
| to 2 kHz<br />
|-<br />
! Best on<br />
| dark surfaces<br />
| light or <br> dark surfaces<br />
| light or <br> dark surfaces<br />
|-<br />
! 2024 Status:<br />
| Not Available<br />
| Not Available<br />
| Available<br />
|-<br />
|}<br />
<br />
'''Z-zero should be set 18 mm from the bottom of the focusing lens hardware for the Diode lasers.'''<br />
<br />
Hyrel offers diode lasers in several configurations:<br />
<br />
* The LA6-450, a 6 watt, 450 nanometer laser. [https://www.youtube.com/watch?v=OceUiuTixPA LA6-450 Intro Video]<br />
* The LA5-808, a 5 watt, 808 nanometer laser. [https://www.youtube.com/watch?v=0lpa4nENtyQ LA5-808 Intro Video]<br />
* The LA3-450, a 3 watt, 450 nanometer laser.<br />
<br />
More videos about the diode lasers:<br />
<br />
*[https://www.youtube.com/watch?v=C5-NYk06NVc Laser Marking on a Cylinder]<br />
*[https://www.youtube.com/watch?v=Tz6mRSkOaSk LA6-450 and LA5-808 Laser Overview]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
Manuals are available on the '''[[Manuals]]''' page, or in Repetrel under HELP > Accessory Manuals</div>Davohttps://hyrel3d.com/wiki/index.php?title=Lasers&diff=7757Lasers2024-02-28T18:02:07Z<p>Davo: /* CO2 Lasers (DISCONTINUED) */</p>
<hr />
<div>[[Category:Hardware]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== <span style="color: maroon;">Lasers: Exciting!</span> ==<br />
<br />
<span style="color: maroon;">'''''Also, dangerous.'''''</span><br />
<br />
<span style="color: maroon;">'''''Only safety-conscious adults with proper safeguards should operate lasers of any kind.'''''</span><br />
<br />
== CO<sub>2</sub> Lasers (DISCONTINUED) ==<br />
<br />
[[File:LI40.jpg]]<br />
<br />
Hyrel FORMERLY offered a 40w CO<sub>2</sub> laser on some of our Hydra 16A models.<br />
<br />
We recommended at least 500 cfm (850 m<sup>3</sup>/h) of exhaust while lasering.<br />
<br />
This information is preserved for customers who already own a CO2 laser on their Hyrel equipment.<br />
<br />
=== Hyrel Specific ===<br />
<br />
==== Settings ====<br />
<br />
Your acutal laser controller, on the Aux Heads tab, should be set to "Laser_40".<br><br />
Your safety/mirror/lens controller, on the Heads 1-5 tab, should be set to "CO2_Laser" or the newer "CO2_Lens".<br />
<br />
'''Z-zero should be set 8 mm from the bottom of the focusing lens hardware for the CO2 laser.'''<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 30%;" | Property<br />
! style="width: 20%;" | LI-40<br />
|-<br />
! Watts<br />
| ~40<br />
|-<br />
! Wavelength<br />
| 10,600 nm<br />
|-<br />
! Focused<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~8mm<br />
|-<br />
! Dot Size<br />
| ~400µm<br />
|-<br />
|}<br />
<br />
==== Videos ====<br />
<br />
*'''[https://www.youtube.com/watch?v=qBBxkx40H8s CO2 Laser Alignment]'''<br />
*[https://youtu.be/kqnjlTSg-20 CO2 Laser Marking with the Hydra]<br />
*[https://youtu.be/FnYDoNkgOrI Converting a Hydra from Printer to Laser]<br />
*[https://youtu.be/fHqTlcdISIg Cutting Nylon Mesh with CO2 Laser on a Hydra]<br />
*[https://youtu.be/4Y9V6RWhKj4 Cutting Acrylic with the CO2 Laser on a Hydrda]<br />
*[https://www.youtube.com/watch?v=WNr59eCGuK4 Changing the Address Resistor on the Hydra CO2 Laser]<br />
*[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel Hydra CO2 Laser Alignment]<br />
*[https://www.youtube.com/watch?v=WrImt7_Pnxo Flashing Firmware on the Modified CO2 Laser Controller]<br />
*[https://www.youtube.com/watch?v=GCzPw4FOG8c Draining Laser Coolant on the Hyrel Hydra]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
=== Laser Alignment ===<br />
<br />
[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel CO2 Laser Alignment Video.]<br />
<br />
Below are great videos about laser alignment in very similar setups:<br />
<br />
#[https://www.youtube.com/watch?v=Vl6QKlwRKlk RDWorks]<br />
#[https://www.youtube.com/watch?v=pw8Ro2vEEzY ThunderLaser]<br />
#[https://www.youtube.com/watch?v=wY5D27TQwZI BossLaser]<br />
#[https://www.youtube.com/watch?v=T9p-1AZKCVg MakeTech]<br />
<br />
=== Informational Videos ===<br />
<br />
Below are links to some VERY helpful videos from a gentleman named Russ, who purchased a laser engraver very similar to ours. In these videos, he shares his experiences, advice, and safety tips. While some of what Russ explains does not apply to using lasers on Hyrel equipment, much of it does. Please watch all these videos, even if you don't feel you need the information. Safety first!<br />
<br />
#[https://www.youtube.com/watch?v=YvrMeUUzaBo Introduction to Laser Cutting] <br />
#[https://www.youtube.com/watch?v=zF9nQHlvGkc Laser Theory and Safety Issues]<br />
#[https://www.youtube.com/watch?v=SGD8BPZntxY Software (n/a for Hyrel users)]<br />
#[https://www.youtube.com/watch?v=fA1jM9hTk6s Initial Setup and Powerup]<br />
#[https://www.youtube.com/watch?v=Zcze9B0BmpA Test Prints]<br />
#[https://www.youtube.com/watch?v=PUdEUxJH2_o Focal Distance and Power Analysis]<br />
#[https://www.youtube.com/watch?v=GNV0JUJXdvk Modifications and Recommendations from a Year of Use]<br />
<br />
== Diode Lasers ==<br />
<br />
[[File:LA5-6.jpg]]<br />
<br />
While less powerful than CO<sub>2</sub> lasers, diode lasers are still dangerous, and the same safety precautions apply.<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 30%;" | Property<br />
! style="width: 20%;" | LA5-808<br />
! style="width: 20%;" | LA6-405<br />
! style="width: 20%;" | LA6-450<br />
|-<br />
! Watts<br />
| ~5<br />
| ~6<br />
| ~6<br />
|-<br />
! Wavelength<br />
| 808<br />
| 405<br />
| 450<br />
|-<br />
! Columnated<br />
| FAC<br />
| No<br />
| No<br />
|-<br />
! Focused<br />
| Yes<br />
| Yes<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~100mm<br />
| ~18mm<br />
| ~18mm<br />
|-<br />
! Dot Size<br />
| ~250 µm<br />
| ~250 µm<br />
| ~250 µm<br />
|-<br />
! Pulsable<br />
| to 2 kHz<br />
| to 2 kHz<br />
| to 2 kHz<br />
|-<br />
! Best on<br />
| dark surfaces<br />
| light or <br> dark surfaces<br />
| light or <br> dark surfaces<br />
|-<br />
|}<br />
<br />
'''Z-zero should be set 18 mm from the bottom of the focusing lens hardware for the Diode lasers.'''<br />
<br />
Hyrel offers diode lasers in several configurations:<br />
<br />
* The LA6-450, a 6 watt, 450 nanometer laser. [https://www.youtube.com/watch?v=OceUiuTixPA LA6-450 Intro Video]<br />
* The LA5-808, a 5 watt, 808 nanometer laser. [https://www.youtube.com/watch?v=0lpa4nENtyQ LA5-808 Intro Video]<br />
* The LA3-450, a 3 watt, 450 nanometer laser.<br />
<br />
More videos about the diode lasers:<br />
<br />
*[https://www.youtube.com/watch?v=C5-NYk06NVc Laser Marking on a Cylinder]<br />
*[https://www.youtube.com/watch?v=Tz6mRSkOaSk LA6-450 and LA5-808 Laser Overview]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
Manuals are available on the '''[[Manuals]]''' page, or in Repetrel under HELP > Accessory Manuals</div>Davohttps://hyrel3d.com/wiki/index.php?title=Lasers&diff=7756Lasers2024-02-28T18:01:32Z<p>Davo: /* CO2 Lasers */</p>
<hr />
<div>[[Category:Hardware]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== <span style="color: maroon;">Lasers: Exciting!</span> ==<br />
<br />
<span style="color: maroon;">'''''Also, dangerous.'''''</span><br />
<br />
<span style="color: maroon;">'''''Only safety-conscious adults with proper safeguards should operate lasers of any kind.'''''</span><br />
<br />
== CO<sub>2</sub> Lasers (DISCONTINUED) ==<br />
<br />
[[File:LI40.jpg]]<br />
<br />
Hyrel FORMERLY offered a 40w CO<sub>2</sub> laser on some of our Hydra 16A models.<br />
<br />
We recommended at least 500 cfm (850 m<sup>3</sup>/h) of exhaust while lasering.<br />
<br />
=== Hyrel Specific ===<br />
<br />
==== Settings ====<br />
<br />
Your acutal laser controller, on the Aux Heads tab, should be set to "Laser_40".<br><br />
Your safety/mirror/lens controller, on the Heads 1-5 tab, should be set to "CO2_Laser" or the newer "CO2_Lens".<br />
<br />
'''Z-zero should be set 8 mm from the bottom of the focusing lens hardware for the CO2 laser.'''<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 30%;" | Property<br />
! style="width: 20%;" | LI-40<br />
|-<br />
! Watts<br />
| ~40<br />
|-<br />
! Wavelength<br />
| 10,600 nm<br />
|-<br />
! Focused<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~8mm<br />
|-<br />
! Dot Size<br />
| ~400µm<br />
|-<br />
|}<br />
<br />
==== Videos ====<br />
<br />
*'''[https://www.youtube.com/watch?v=qBBxkx40H8s CO2 Laser Alignment]'''<br />
*[https://youtu.be/kqnjlTSg-20 CO2 Laser Marking with the Hydra]<br />
*[https://youtu.be/FnYDoNkgOrI Converting a Hydra from Printer to Laser]<br />
*[https://youtu.be/fHqTlcdISIg Cutting Nylon Mesh with CO2 Laser on a Hydra]<br />
*[https://youtu.be/4Y9V6RWhKj4 Cutting Acrylic with the CO2 Laser on a Hydrda]<br />
*[https://www.youtube.com/watch?v=WNr59eCGuK4 Changing the Address Resistor on the Hydra CO2 Laser]<br />
*[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel Hydra CO2 Laser Alignment]<br />
*[https://www.youtube.com/watch?v=WrImt7_Pnxo Flashing Firmware on the Modified CO2 Laser Controller]<br />
*[https://www.youtube.com/watch?v=GCzPw4FOG8c Draining Laser Coolant on the Hyrel Hydra]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
=== Laser Alignment ===<br />
<br />
[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel CO2 Laser Alignment Video.]<br />
<br />
Below are great videos about laser alignment in very similar setups:<br />
<br />
#[https://www.youtube.com/watch?v=Vl6QKlwRKlk RDWorks]<br />
#[https://www.youtube.com/watch?v=pw8Ro2vEEzY ThunderLaser]<br />
#[https://www.youtube.com/watch?v=wY5D27TQwZI BossLaser]<br />
#[https://www.youtube.com/watch?v=T9p-1AZKCVg MakeTech]<br />
<br />
=== Informational Videos ===<br />
<br />
Below are links to some VERY helpful videos from a gentleman named Russ, who purchased a laser engraver very similar to ours. In these videos, he shares his experiences, advice, and safety tips. While some of what Russ explains does not apply to using lasers on Hyrel equipment, much of it does. Please watch all these videos, even if you don't feel you need the information. Safety first!<br />
<br />
#[https://www.youtube.com/watch?v=YvrMeUUzaBo Introduction to Laser Cutting] <br />
#[https://www.youtube.com/watch?v=zF9nQHlvGkc Laser Theory and Safety Issues]<br />
#[https://www.youtube.com/watch?v=SGD8BPZntxY Software (n/a for Hyrel users)]<br />
#[https://www.youtube.com/watch?v=fA1jM9hTk6s Initial Setup and Powerup]<br />
#[https://www.youtube.com/watch?v=Zcze9B0BmpA Test Prints]<br />
#[https://www.youtube.com/watch?v=PUdEUxJH2_o Focal Distance and Power Analysis]<br />
#[https://www.youtube.com/watch?v=GNV0JUJXdvk Modifications and Recommendations from a Year of Use]<br />
<br />
== Diode Lasers ==<br />
<br />
[[File:LA5-6.jpg]]<br />
<br />
While less powerful than CO<sub>2</sub> lasers, diode lasers are still dangerous, and the same safety precautions apply.<br />
<br />
{| border="1" class="wikitable" style="width: 60%; text-align: center;"<br />
|+ Diode Laser Properties<br />
|-<br />
! style="width: 30%;" | Property<br />
! style="width: 20%;" | LA5-808<br />
! style="width: 20%;" | LA6-405<br />
! style="width: 20%;" | LA6-450<br />
|-<br />
! Watts<br />
| ~5<br />
| ~6<br />
| ~6<br />
|-<br />
! Wavelength<br />
| 808<br />
| 405<br />
| 450<br />
|-<br />
! Columnated<br />
| FAC<br />
| No<br />
| No<br />
|-<br />
! Focused<br />
| Yes<br />
| Yes<br />
| Yes<br />
|-<br />
! Focal Distance<br />
| ~100mm<br />
| ~18mm<br />
| ~18mm<br />
|-<br />
! Dot Size<br />
| ~250 µm<br />
| ~250 µm<br />
| ~250 µm<br />
|-<br />
! Pulsable<br />
| to 2 kHz<br />
| to 2 kHz<br />
| to 2 kHz<br />
|-<br />
! Best on<br />
| dark surfaces<br />
| light or <br> dark surfaces<br />
| light or <br> dark surfaces<br />
|-<br />
|}<br />
<br />
'''Z-zero should be set 18 mm from the bottom of the focusing lens hardware for the Diode lasers.'''<br />
<br />
Hyrel offers diode lasers in several configurations:<br />
<br />
* The LA6-450, a 6 watt, 450 nanometer laser. [https://www.youtube.com/watch?v=OceUiuTixPA LA6-450 Intro Video]<br />
* The LA5-808, a 5 watt, 808 nanometer laser. [https://www.youtube.com/watch?v=0lpa4nENtyQ LA5-808 Intro Video]<br />
* The LA3-450, a 3 watt, 450 nanometer laser.<br />
<br />
More videos about the diode lasers:<br />
<br />
*[https://www.youtube.com/watch?v=C5-NYk06NVc Laser Marking on a Cylinder]<br />
*[https://www.youtube.com/watch?v=Tz6mRSkOaSk LA6-450 and LA5-808 Laser Overview]<br />
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]<br />
<br />
Manuals are available on the '''[[Manuals]]''' page, or in Repetrel under HELP > Accessory Manuals</div>Davohttps://hyrel3d.com/wiki/index.php?title=Flow_Rate&diff=7755Flow Rate2024-02-26T15:03:28Z<p>Davo: /* M221 Note! */</p>
<hr />
<div>[[Category:Gcode]]<br />
{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
== <span style="color: red;">M221 Note!</span> ==<br />
<br />
<span style="color: red;">This page describes our native Hyrel flow calculations. '''If you are using M229 E1 D1 to opt in to using the E values produced by the slicer, IGNORE THE FLOW CALCULATIONS ON THIS PAGE.'''<br />
<br />
<span style="color: red;">Also note, ONLY v4.x and later will use E-values. v1.x, v2.x, and v3.x will ONLY use the information below.</span> <br />
<br />
'''If you are using one of the following:<br />
* '''M229 E0 D0<br />
* '''No mention of M229<br />
* '''Version 3.x or earlier<br />
<br />
'''...then the info below is accurate for your printing.<br />
<br />
If you ARE using M229 E1 D1, then the printer will flow according to the E values in your gcode, and NOT use the formulas below.<br />
<br />
Either way, the PRIME and UNPRIME numbers are still used; we do NOT use gcode-based retraction.<br />
<br />
== Overview ==<br />
<br />
We often get asked how we calculate our flow rate. <br />
<br />
We do not use your slicer-generated E (flow) values or advance/retract commands. This means we do not use your slicer-generated extrusion width variations, filament width variations, flow rate multipliers, or any of that.<br />
<br />
What do we use? We use the X/Y/Z positioning and speed, and we use the temperature and cooling. We do not use your flow commands - except to determine which are and are not printing moves.<br />
<br />
We calculate the flow rate for each and every move based on the following parameters:<br />
<br />
# Nozzle (extrusion) width, as specified on the head (or, optionally, in gcode); should match the extrusion width in your recipe and gcode.<br />
# Layer thickness (height), as specified in your gcode. ''Width times Height tells us the Cross Section of your print path.''<br />
# Print speed, as specified in your gcode. ''Volume divided by print speed tells us how many nl per second to dispense.''<br />
# Pulses/nl, as specified on the head (or, optionally, in gcode). ''Pulses/nl times nl/second tells us how many pulses per second to dispense.''<br />
# Material Flow Rate Multiplier, as specified on the head (or, optionally, in gcode). ''Material Flow Rate Multiplier is a direct modifier of your other calculations; 1.00 = no modification; 0.90 means 10% less flow, etc.''<br />
<br />
''Note: Versions 1.x and 2.x used pulses per ~10 nanoliters (nl). Version 3.x uses pules per microliter (μl).''<br />
<br />
<br />
<br />
{| class="wikitable"<br />
|+ I just had to type this out again for another customer, so I will save that text here:<br />
|To determine flow we consider:<br><br><br />
<span style="color:red">'''1. Path Width''', as specified in the nozzle diameter paramenter '''on the data for that print head''' (NOT path width in the slicer) [unless you manually hard code a value in your gcode];</span><br><br><br />
<span style="color:blue">'''2. Path Height (or Layer Thickness)''', as specified '''in your gcode by an M756 command with an S (slice thickness) value''' (NOT on the print head);</span><br><br><br />
- '''<span style="color:red">1</span> x <span style="color:blue">2</span>''' - these two define the a '''cross section''' to fill during this move.<br><br><br />
<span style="color:purple">'''3. Print Speed''', as specified '''in your gcode by a G1 command with an F (feed rate) value''' (which should be set by your slicer, but may be edited afterward);</span><br><br><br />
- '''<span style="color:red">1</span> x <span style="color:blue">2</span> x <span style="color:purple">3</span>''' - cross section times linear speed gives us '''volume per unit time (in nl/sec)''' to be dispensed.<br><br><br />
<span style="color:darkorange">'''4. Pulses per Microliter''' (on v3, this was pulses for 10 nanoliters), as specified '''on the data for that print head''' (NOT path width in the slicer) [unless you manually hard code a value in your gcode];</span><br><br><br />
- '''<span style="color:red">1</span> x <span style="color:blue">2</span> x <span style="color:purple">3</span> x <span style="color:darkorange">4</span>''' - volume per unit time times pulses per unit volume gives us how fast in '''pulses per second''' to dispense.<br><br><br />
<span style="color:magenta">'''5. Material Flow Rate Multiplier''', as specified '''on the data for that print head''' (NOT path width in the slicer) [unless you manually hard code a value in your gcode];</span><br><br><br />
- '''<span style="color:red">1</span> x <span style="color:blue">2</span> x <span style="color:purple">3</span> x <span style="color:darkorange">4</span> x <span style="color:magenta">5</span>''' - pulses per second is modified by this Material Flow Rate Multiplier (default of 1) to account for over/under sized filament or slippage due to gummy material.<br />
|}<br />
<br />
We also determine when we are transitioning between printing and non-printing moves, and prime (advance) and unprime (retract) per the variables stored on your print head (or as you have manually specified in your gcode).<br />
<br />
== GCode ==<br />
<br />
So, how can you specify this in GCode?<br />
<br />
One of the things that a slicer does is generate extrusion values along with the moves, so that printers know how much material to deploy (or not to deploy any) during a move. For example:<br />
<br />
'''G1 X107.310 Y122.630 E1.45876'''<br />
<br />
This line tells the printer to do a normal speed move from the present location to position '''X=107.310''' and '''Y=122.630''' while extruding a certain amount '''E1.45876''' of material. However, on Hyrel machines, the material feed rate is calculated from the data stored on the print head, and is not taken directly from the gcode. <br />
<br />
We do a simple boolean check on the G1 move to determine if it is a printing move or not (if it has an E value or not), and we calculate our own flow based on path width, layer height, pulses per 10 nanoliters and the FR Scale which are stored in the head data. We also calculate our own prime/unprime settings based on the data displayed and stored on the print head.<br />
<br />
The default setting for the EMO-25 is 1.76 pulses/nl and 1.0 feed rate. In gcode, this is:<br />
<br />
'''M221 S1 P1.76 T12'''<br />
<br />
This tells the printer to do a Set tool values of Material Flow Rate Multiplier (formerly called Feed Rate Adjustment or "fudge factor") '''S1''' times Pulses per 10 nanoliters '''P1.76''' for the Tool at Yoke 1, Position 2 '''T12'''.<br />
<br />
This is sourced in as a default when you start the job, but can be changed programmatically in the gcode as follows:<br />
<br />
G1 F1200 ; set print speed to 1200 mm/min (20 mm/sec)<br />
G1 X10 Y10 Z0.25 ; move to start of line 1<br />
M221 S1 P1.76 T12 ; set extrusion rate to 1*1.76 on yoke 1, tool 2 (base value)<br />
G1 X60 Y10 E1 ; 1st printing move<br />
G1 X10 Y20 ; move to start of line 2 <br />
M221 S1.1 P1.76 T12 ; set extrusion rate to 1.1*1.76 on yoke 1, tool 2 (10% greater than line 1)<br />
G1 X60 Y20 E1 ; 2nd printing move<br />
G1 X10 Y30 ; move to start of line 3<br />
M221 S1.2 P1.76 T12 ; set extrusion rate to 1.2*1.76 on yoke 1, tool 2 (20% greater than line 1)<br />
G1 X60 Y30 E1 ; 3rd printing move<br />
<br />
To give this more depth, here is exactly how we calculate the flow rate.<br />
<br />
At the start of a job (when you click "Run Job"), Repetrel transmits settings via gcode commands to the STM407 Motion Controller, based on the data you have displayed for that print head. For our example, I have a MK1 head loaded in slot 2:<br />
<br />
M6 T12 O2 X0 Y0 Z0<br />
M721 S10000 E300 P80 T12<br />
M722 S10000 E300 P105 T12<br />
M221 S1.0 T12 P0.80 W0.5 Z0.3<br />
<br />
Let's break this down:<br />
<br />
'''M6 T12 O2 X0 Y0 Z0''' - sets the offsets for tool 2 (normally zero unless you have heads cooperating on a print, but you could program them for their distance from center; T2 is centered on newer printers, and 35mm off center in the +X direction on older printers. On all printers, T3 35mm off center in the -X, T1 is 70mm +X, T4 is 70mm -X.<br />
<br />
'''M721 S10000 E300 P80 T12''' - sets the UNPRIME values, in rate (S), min dwell time (E), and pulses (P) for slot 2 (T)<br />
<br />
'''M722 S10000 E300 P105 T12''' - sets the PRIME values as above;<br />
<br />
'''M221 S1.0 T12 P0.80 W0.5 Z0.3''' - sets up your flow data:<br />
'''S1.0''' = adjustment value of 1.0 (100% of the pulses per 10 nanoliters)<br />
'''T12''' = tool at yoke 1, slot 2<br />
'''P0.80''' = pulses per 10 nanoliters<br />
'''W0.5''' = extrusion width<br />
'''Z0.3''' = Z layer thickness<br />
<br />
Now, any or all of these variables may be updated with a new value by a subsequent '''M221''' command; all values are persistent unless/until updated to a new (possibly 0) value later on in the code - or by adjusting the S or P values live on the print head.<br />
<br />
=== Immediate Commands ===<br />
<br />
<br />
While '''M721 S10000 E300 P105 T12''' will set up the prime ''values'' for the print head, it will not cause these values to be executed.<br />
<br />
'''M721 I1''' will cause that print head last addressed (or '''M721 T12 I1''' if you want to specify) to perform the unprime at this point in the code, with the values previously stored for that head.<br />
<br />
Likewise, '''M722 I1''' will cause the print head to do a prime.<br />
<br />
== Initial Numbers ==<br />
<br />
So, sometimes people ask us where we get our numbers for pulses per microliter, and prime, and unprime.<br />
<br />
=== Flow ===<br />
<br />
First, we determine the flow. M221 is detailed at http://hyrel3d.net/wiki/index.php?title=Gcode#M221_Set_Flow_Rate but I will reproduce this here:<br />
<br />
'''M221 sends information to the printer about material flow:'''<br />
<br />
* P is the number of pulses on the motor to dispense 10 nl of material;<br />
* S is the direct flow multiplier (to allow for undersized or oversized stock;<br />
* W is the width of the cross section of the volume to fill;<br />
* Z is the height (layer thickness) of the cross section of the volume to fill; and<br />
* T is the tool (head) to which these values will be applied.<br />
<br />
Here is an example:<br />
<br />
M221 S1.0 T11 P77 W0.5 Z0.3<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* '''M221''' (Set Flow Rate) <br />
** '''S1.0''' (flow multiplier of 1.0) <br />
** '''T11''' (for far left head) <br />
** '''P77''' (77 pulses per microliter) <br />
** '''W0.5''' (0.5mm nozzle) <br />
** '''Z0.3''' (0.3mm layer thickness) - note that your gcode M756 will overwrite this value)<br />
<br />
<br />
This can be as simple as setting the Z-zero and printing a "digital snake" like this - a series of long lines at a constant speed (without headers and footers), using slot 2 (T1):<br />
<br />
T1<br />
G0 X50 Y50<br />
G1 X150 Y50 E1 F2000<br />
G1 X150 Y60 E1<br />
G1 X50 Y60 E1<br />
G1 X50 Y70 E1<br />
G1 X150 Y70 E1<br />
G1 X150 Y80 E1<br />
G1 X50 Y80 E1<br />
G1 X50 Y90 E1<br />
G1 X150 Y90 E1<br />
<br />
So, that's fine if everything's perfect. But let's say your pulses per microliter were set to 80, but you are not putting out enough material. We would change the flow parameters with each line, like this:<br />
<br />
T1<br />
G0 X50 Y50<br />
M221 T12 P81 ; 81 pulses<br />
G1 X150 Y50 E1 F2000<br />
G1 X150 Y60 E1<br />
M221 T12 P82 ; 82 pulses<br />
G1 X50 Y60 E1<br />
G1 X50 Y70 E1<br />
M221 T12 P83 ; 83 pulses<br />
G1 X150 Y70 E1<br />
G1 X150 Y80 E1<br />
M221 T12 P84 ; 84 pulses<br />
G1 X50 Y80 E1<br />
G1 X50 Y90 E1<br />
M221 T12 P85 ; 85 pulses<br />
G1 X150 Y90 E1<br />
<br />
Now, we'll inspect these lines, and let's say the lines printed with 83 pulses was very good, but we want it to be even better; we'd do this:<br />
<br />
T1<br />
G0 X50 Y50<br />
M221 T12 P82.4 ; 82.4 pulses<br />
G1 X150 Y50 E1 F2000<br />
G1 X150 Y60 E1<br />
M221 T12 P82.6 ; 82.6 pulses<br />
G1 X50 Y60 E1<br />
G1 X50 Y70 E1<br />
M221 T12 P82.8 ; 82.8 pulses<br />
G1 X150 Y70 E1<br />
G1 X150 Y80 E1<br />
M221 T12 P83 ; 83 pulses<br />
G1 X50 Y80 E1<br />
G1 X50 Y90 E1<br />
M221 T12 P83.2 ; 83.2 pulses<br />
G1 X150 Y90 E1<br />
<br />
Now, we inspect these again, and decide that 82.8 pulses is our number. Or, we can repeat this with smaller increments until we get the number that works best. Then we'll test it on actual prints.<br />
<br />
When we're happy with the flow number, we'll move on to the Unprime...<br />
<br />
=== Unprime ===<br />
<br />
Now we need to dial in the UNPRIME.<br />
<br />
'''PLEASE NOTE that our firmware will automatically execute the current UNPRIME values ONE TIME when we detect that your head is changing from an extruding state to a non-extruding state.'''<br />
<br />
M721 is detailed at http://hyrel3d.net/wiki/index.php?title=Gcode#M721_Set_Unprime_Values but I will reproduce it here:<br />
<br />
'''M721 sends information to the printer about how much material to unprime when a transition from printing move to non-printing move is detected:'''<br />
<br />
* S is the speed at which unprime moves should be executed; this is normally 10,000;<br />
* E is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials;<br />
* P is the number of milliseconds to pause before enabling the flow rate for the following move; <br />
* T is the tool (head) to which these values will be applied; and<br />
* I is the flag for executing an Immediate action; so M721 I1 would execute an unprime with the previously specified values at that point in the gcode.<br />
<br />
Here is an example:<br />
<br />
M721 S10000 E100 P-15 T11<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* '''M721''' (Set Unprime Values) <br />
** '''S10000''' (10,000 pps) <br />
** '''E100''' (100 pulses) <br />
** '''P-15''' (15ms before end of print move sequence)<br />
<br />
<br />
I normally take the same digital snake from above, but I make the short moves non-printing by removing the E1:<br />
<br />
T1<br />
G0 X50 Y50<br />
G1 X150 Y50 E1 F2000<br />
G1 X150 Y60 <br />
G1 X50 Y60 E1<br />
G1 X50 Y70 <br />
G1 X150 Y70 E1<br />
G1 X150 Y80 <br />
G1 X50 Y80 E1<br />
G1 X50 Y90 <br />
G1 X150 Y90 E1<br />
<br />
If the unprimes are good, we're done. If not, I change the values for each printing move. For example, if the unprime pulese were 100, and this was not enough, I'll change ONLY the pulses:<br />
<br />
T1<br />
G0 X50 Y50<br />
M721 T12 E100 ; unprime 100 pulses<br />
G1 X150 Y50 E1 F2000<br />
M721 T12 E120 ; unprime 120 pulses<br />
G1 X150 Y60 <br />
G1 X50 Y60 E1<br />
M721 T12 E140 ; unprime 140 pulses<br />
G1 X50 Y70 <br />
G1 X150 Y70 E1<br />
M721 T12 E160 ; unprime 160 pulses<br />
G1 X150 Y80 <br />
G1 X50 Y80 E1<br />
M721 T12 E180 ; unprime 180 pulses<br />
G1 X50 Y90 <br />
G1 X150 Y90 E1<br />
<br />
Using the same logic as above, I'll dial in the proper number of pulses for the unprime - and this number should be the same for the prime, below.<br />
<br />
Since we always leave the prime/unprime rate at 10,000, next we'll dial in the dwell time. For filament heads this is usually between 20 and 35msec, but for reservoir prints, it's usually much larger. I like to use 1/10 of the number of pulses; so, if my unprime is 4000 pulses, I'll set the delay to 400msec for reservoir heads.<br />
<br />
=== Prime ===<br />
<br />
Lastly, we dial in the PRIME. <br />
<br />
'''PLEASE NOTE that our firmware will automatically execute the current PRIME values ONE TIME when we detect that your head is changing from a non-extruding state to an extruding state.'''<br />
<br />
M722 is detailed at http://hyrel3d.net/wiki/index.php?title=Gcode#M722_Set_Prime_Values but I'll reproduce it here:<br />
<br />
'''M722 sends information to the printer about how much material to prime when a transition from non-printing move to printing move is detected:'''<br />
<br />
* S is the speed at which prime moves should be executed; this is normally 10,000;<br />
* E is the number of pulses on the feed (extrusion) motor to execute; this varies greatly among materials;<br />
* P is the number of milliseconds to pause before enabling the flow rate for the following move; <br />
* T is the tool (head) to which these values will be applied; and<br />
* I is the flag for executing an Immediate action; so M721 I1 would execute a prime with the previously specified values at that point in the gcode.<br />
<br />
Here is an example:<br />
<br />
M722 S10000 E100 P20 T11<br />
<br />
These commands are decoded and executed by the printer as follows:<br />
<br />
* '''M722''' (Set Prime Values) <br />
** '''S10000''' (10,000 pps) <br />
** '''E100''' (100 pulses) <br />
** '''P20''' (20ms before start of print move sequence) <br />
** '''T11''' (for far left head)<br />
<br />
Next, I'll set the primes to the same values as the unprimes (except for positive dwell time, unlike the negative dwell for unprimes). If that works, great! If not, we'll need to tune it up...<br />
<br />
We'll use the same gcode for the primes, but we'll set the prime values instead:<br />
<br />
T1<br />
G0 X50 Y50<br />
M7212 T12 E100 ; prime 100 pulses<br />
G1 X150 Y50 E1 F2000<br />
M722 T12 E120 ; prime 120 pulses<br />
G1 X150 Y60 <br />
G1 X50 Y60 E1<br />
M722 T12 E140 ; prime 140 pulses<br />
G1 X50 Y70 <br />
G1 X150 Y70 E1<br />
M722 T12 E160 ; prime 160 pulses<br />
G1 X150 Y80 <br />
G1 X50 Y80 E1<br />
M722 T12 E180 ; prime 180 pulses<br />
G1 X50 Y90 <br />
G1 X150 Y90 E1<br />
<br />
Next, using the same logic and methodology as before, we'll adjust, print, and observe until we get these final numbers set to our satisfaction.<br />
<br />
== Dispensing a Specific Amount ==<br />
<br />
Because sometimes folks just want to dispense a set number of microliters. <br />
<br />
Remember, the links on the left can take you to frequently-sought pages.<br />
<br />
=== Dispense 1000 uL ===<br />
<br />
To dispense 1,000 uL, you can press the "Dispense 1000 ul" button on the OverRides page:<br />
<br />
[[File:OverRides-2022.png|100px]]<br />
<br />
But if that's not working... read on.<br />
<br />
=== Prime (some) uL ===<br />
<br />
Another option: you can read the Pulses/ul value (in this case, 65) and put it times (however many uL you want) in the Steps field of the Prime page (where 3000 is shown here) and then click "PRIME NOW!!!":<br />
<br />
[[File:Prime-2022.png|100px]]<br />
<br />
=== M722 (Prime) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M722 (Prime) command in: '''M722 E65000 T12 I1''' and then execute it with a right click:<br />
<br />
[[File:Send-M722.png|600px]]<br />
<br />
For more about this command, see [[Gcode#M722_Set_Prime_Values]]<br />
<br />
=== M723 (Manual Extrusion) ===<br />
<br />
Another option: you can get your values like above, but go to the Aux Editor > AUX EDITOR tab and type the M723 (Manual Extrusion) command in: '''M723 E65000 T12''' and then execute it with a right click:<br />
<br />
[[File:Send-M723.png|600px]]<br />
<br />
For more about this command, see Gcode#M723_Set_Manual_Flow</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7754Published Papers2024-02-22T13:31:07Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
505 documents as of 22 February, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://www.preprints.org/manuscript/202402.1033/v1 The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity] by a team from the [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], the [https://en.nuph.edu.ua/ Pharmacognosy department, The National University of Pharmacy, Ukraine], the [http://www.imiamn.org.ua/indexEN.html I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine], the [https://biomeditsiin.ut.ee/en/esileht-bio-ja-siirdemeditsiin-instituut Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu], and the [https://biomeditsiin.ut.ee/en/content/department-microbiology Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7753Published Papers2024-02-22T13:19:44Z<p>Davo: /* Count */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
505 documents as of 22 February, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7752Published Papers2024-02-22T13:19:38Z<p>Davo: /* Count */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
505 documents as of 2 February, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davohttps://hyrel3d.com/wiki/index.php?title=Published_Papers&diff=7751Published Papers2024-02-22T13:19:24Z<p>Davo: /* DIW/SEP/SSE, 2024 */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
<br />
Below is a list of published works citing Hyrel equipment. <br />
<br />
== Count ==<br />
<br />
503 documents as of 2 February, 2024.<br />
<br />
== '''Non-Traditional Manufacturing''' ==<br />
<br />
Including: <br />
* Antennas<br />
* Sensors<br />
* Inductors<br />
* Circuits<br />
* Electro-Spinning <br />
* Electro-Melt-Spinning<br />
* Melt Electro-Writing (MEW)<br />
* 4D Printing<br />
* Shape Memory Polymers<br />
* Nanostructures<br />
* Micro-Encapsulated Phase-Changing Materials (MEPCM)<br />
* Printing with Embedded Fibers<br />
* And combining two or more additive manufacturing methods in a single build.<br />
<br />
== NTM, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202313567 A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration] by a team from [https://www.vt.edu/ Virginia Tech]<br />
<br />
== NTM, 2023 ==<br />
<br />
* [https://link.springer.com/article/10.1007/s11665-023-08979-y Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement] by a team from the US Army Engineer Research and Development Center (EDRC)'s [https://www.erdc.usace.army.mil/Locations/CERL/ Construction Engineering Research Laboratory] and [https://www.erdc.usace.army.mil/Locations/GSL/ Geotechnical & Structures Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0014305723005268 Vitrimer Chemistry for 4D Printing Formulation] by a team from [https://sut.ac.ir/en/ Sahand University of Technology, Iran], [https://www.ntu.ac.uk/ Nottingham Trent University, UK], and [https://www.deakin.edu.au/ Deakin University, Geelong, Australia]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300188 Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs)] by a team from [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202302718 3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review] by a team partially from [https://www.asu.edu/ Arizona State University]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_161.pdf Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring] by a team from [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology (KAUST)]<br />
* [https://arinex.com.au/EMBC/pdf/full-paper_1011.pdf Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*]by a team primarily from [https://www.tamu.edu/ Texas A&M University (TAMU)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.3c02233 Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites] by a team from several departments of the [https://www.iitkgp.ac.in/ Institute of Technology, Kharagpur]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300174 Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating] by a team from several departments of [https://www.tamu.edu/ Texas A&M University] and from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c03873 Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract] by a team from several departments of the [https://www.iitkgp.ac.in/ Indian Institute of Technology, Kharagpur] and the [https://www.drdo.gov.in/labs-and-establishments/defence-materials-and-stores-research-and-development-establishment-dmsrde Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur]<br />
* [https://www.sciencedirect.com/science/article/pii/S0959652623021637#sec2 Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings] by a team from the [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Department of Civil and Mechanical Engineering] and [https://orbit.dtu.dk/en/organisations/department-of-chemistry Department of Chemistry] of the [https://www.dtu.dk/english/ Technical University of Denmark] and the [https://www.utwente.nl/en/et/tfe/ Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands]<br />
* [https://ieeexplore.ieee.org/abstract/document/10161540 Navigating Soft Robots through Wireless Heating] by a team from [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://link.springer.com/article/10.1007/s11771-023-5340-6 Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing] by a team from [https://en.csu.edu.cn/ Central South University, China]<br />
* [https://www.mdpi.com/2076-0825/12/5/189 Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications] by a team from the [https://cec.georgiasouthern.edu/manufacturing-engineering/ Department of Manufacturing Engineering, Georgia Southern University]<br />
* [https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/ell2.12749 3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation] by a team from several departments of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05140 Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne], [https://www.healthtech.dtu.dk/ Department of Health Technology, Technical University of Denmark], and [https://www.cmmc-uni-koeln.de/home Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c03334 Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy] by a team from the [https://chemie.uni-koeln.de/en/research/institute-of-inorganic-chemistry Institute of Inorganic Chemistry, University of Cologne], the [https://www.polimi.it/en/scientific-research/research-at-the-politecnico/departments/department-of-chemistry-materials-and-chemical-engineering-giulio-natta Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano], and the [https://www.cmmc-uni-koeln.de/home Center for Molecular Medicine Cologne (CMMC)]<br />
* [https://www.pnas.org/doi/abs/10.1073/pnas.2220032120 3D Printing of Responsive Chiral Photonic Nanostructures] by a team from [https://www.cornell.edu/ Cornell University]'s [https://cals.cornell.edu/food-science Department of Food Science] and [https://sc.edu/ University of South Carolina]'s Departments of [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Chemical] Engineering <br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/smll.202206847 3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering, University of South Carolina]<br />
* [https://www.nature.com/articles/s41467-023-36214-8 Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics] by a team from a team from a variety of departments of the [https://www.utoronto.ca/ University of Toronto]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4659&context=open_etd Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing], a PhD thesis submitted to the [https://www.utep.edu/engineering/ece/ Department of Electrical and Computer Engineering, University of Texas at El Paso]<br />
<br />
== NTM, 2022 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/10.1002/adfm.202201766 Direct Ink Writing of 4D Structural Colors] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry] and [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems (ICMS)] of the [https://www.tue.nl/en Eindhoven University of Technology (TU/e)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/smll.202200951 4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture] by a team from the [https://www.colorado.edu/chbe/ Department of Chemical and Biological Engineering] and the [https://www.colorado.edu/biofrontiers/ BioFrontiers Institute] of the [https://www.colorado.edu/ University of Colorado - Boulder] and the [https://medschool.cuanschutz.edu/mstp Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus]<br />
* [https://iopscience.iop.org/article/10.1149/10916.0003ecst/meta Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology], [https://www.yachaytech.edu.ec/en/ Yachay Tech Universiy], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://www.mdpi.com/2072-666X/13/10/1606/pdf Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from the [https://lgef.insa-lyon.fr/en/ Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon] and the [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies]<br />
* [https://scholarworks.uark.edu/cgi/viewcontent.cgi?article=1110&context=meeguht Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing] an Honors Thesis submitted to the [https://mechanical-engineering.uark.edu/ Mechanical Engineering Department of the University of Arkansas]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12042/120420W/Additively-manufactured-unimorph-dielectric-elastomer-actuators-with-ferroelectric-particles-for/10.1117/12.2613128.short?SSO=1 Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation] by a team from the [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy]<br />
* [https://mdpi-res.com/d_attachment/polymers/polymers-14-01351/article_deploy/polymers-14-01351-v2.pdf Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments], a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from [https://www.uss.cl/ Universidad San Sebastián], [https://www.utem.cl/ Universidad Tecnológica Metropolitana, Santiago], and [https://www.csic.es/en/investigation/institutes-centres-units/institute-polymer-science-and-technology Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas], Chile<br />
<br />
== NTM, 2021 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S235249282100951X 4D-Actuators by 3D-Printing Combined with Water-based Curing] by a team from [https://www.hereon.de/institutes/active_polymers/index.php.en Institute of Active Polymers, Helmholtz-Zentrum Hereon]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202106843 4D Printing of Engineered Living Materials] by a team from several departments at [https://www.tamu.edu/ Texas A&M University<br />
* [https://digitalcommons.georgiasouthern.edu/cgi/viewcontent.cgi?article=3539&context=etd Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles] a thesis presented to [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00949 Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction] by a team from [https://vit.ac.in/schools/smec School of Mechanical Engineering Vellore Institute of Technology, India]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c12948 Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material] by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
* [https://www.mdpi.com/1999-4923/13/9/1524/pdf 3D Printing of Thermo-Sensitive Drugs] by a team from the [https://www.unisa.edu.au/ University of South Australia] and [http://www.aau.edu.et/ Addis Ababa University]<br />
* [https://advances.sciencemag.org/content/advances/7/29/eabg8433.full.pdf Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables] by a team from the [https://www.ntu.edu.sg/mse School of Materials Science and Engineering, Nanyang Technological University] and the [https://en.whu.edu.cn/Schools1/Faculty_of_Engineering.htm School of Electrical Engineering and Automation, Wuhan University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202100361 Optimal Soft Composites for Under-Actuated Soft Robots] by a team from [https://www.sutd.edu.sg/ The Singapore University of Technology and Design]<br />
* [https://journals.sagepub.com/doi/full/10.1177/24726303211020297 Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c05082 3D Printing of Electrically Responsive PVC Gel Actuators]by a team from the [https://mae.ucsd.edu/ Mechanical and Aerospace Engineering] and [https://mae.ucsd.edu/matsci Materials Science and Engineering] departments of [https://ucsd.edu/ The University of California, San Diego]<br />
* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices.pdf 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation<br />
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aesr.202000045 3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges] by a team from the engineering schools of [https://www.deakin.edu.au/engineering Deakin University], [https://www.unimelb.edu.au/ The University of Melbourne], [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/bioengineering/ UCLA], and [http://www.mse.gatech.edu/ Georgia Tech]<br />
* [https://cecas.clemson.edu/~jbostwi/wp-content/uploads/2021/02/wtcb2021jmp.pdf Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering, Clemson University]<br />
<br />
== NTM, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1742706120307650 4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation] by a team from the [http://catalog.missouri.edu/undergraduategraduate/collegeofengineering/mechanicalandaerospaceengineering/ Department of Mechanical and Aerospace Engineering], the [https://medicine.missouri.edu/departments/surgery Department of Surgery], the [https://foodscience.missouri.edu/ Food Science Program, Division of Food Systems & Bioengineering], and the [https://engineering.missouri.edu/academics/bbce/ Department of Biomedical, Biological & Chemical Engineering] of the [https://missouri.edu/ University of Missouri]<br />
* [https://dl.acm.org/doi/abs/10.1145/3432232 Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics] by a team from [https://www.cmu.edu Carnegie Mellon University] and [http://www.zju.edu.cn/english/ Zhejiang University, China]<br />
* [https://www.tandfonline.com/doi/abs/10.1080/24725854.2020.1849876 An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory], [https://vt.edu/ Virginia Tech], and [https://go.okstate.edu/ Oklahoma Stata University], funded by the [https://www.nsf.gov/ National Science Foundation] and the [https://www.onr.navy.mil/ Office of Naval Research]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S1350453320301703 Additive Manufacturing Techniques for Smart Prosthetic Liners] by a team from several departments of the [https://www.ucl.ac.uk/ University College London] in cooperation with the [https://www.rnoh.nhs.uk/ Royal National Orthopaedic Hospital, Stanmore, UK]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220332211#! Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores] by a team from [https://vt.edu/ Virginia Tech's] [https://mse.vt.edu/ Materials Science and Engineering Department], [https://cpes.vt.edu/ Center for Power Electronics Systems], and [https://ece.vt.edu/ Bradley Department of Electrical and Computer Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]<br />
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://tigerprints.clemson.edu/cgi/viewcontent.cgi?article=4389&context=all_theses Wetting Analysis of the Ultrasonic-Assisted Soldering Process], a thesis submitted to [https://www.clemson.edu/cecas/departments/me/ The Mechanical Engineering Department of Clemson University]<br />
* [http://www.freepatentsonline.com/y2020/0146994.html Solid Dosage Form Production], a patent application by a team from the [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences of the University of Central Lancashire]<br />
* [https://ieeexplore.ieee.org/abstract/document/9043493 Flexible Fiber Interconnects For Soft Mechatronics] by a team from the [https://www.sutd.edu.sg/ Singapore University of Technology and Design (SUTD)]<br />
<br />
== NTM, 2019 ==<br />
<br />
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]<br />
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]<br />
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]<br />
<br />
== NTM, 2018 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]<br />
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]<br />
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]<br />
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]<br />
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]<br />
<br />
== NTM, 2017 ==<br />
<br />
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]<br />
* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], by a team from [http://www.gatech.edu Georgia Tech]<br />
* [http://scholarworks.rit.edu/cgi/viewcontent.cgi?article=10830&context=theses A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication] by Smruti Ranjan Sahoo at [http://rit.edu Rochester Institute of Technology]<br />
* [http://www.mdpi.com/1424-8220/17/9/2068/htm Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators] in [http://www.mdpi.com/journal/sensors Sensors], a Journal of the [http://www.mdpi.com/ Multidisciplinary Digital Publishing Institute]<br />
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
<br />
== NTM, 2016 ==<br />
<br />
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications] by a team from [http://vt.edu Virginia Tech]<br />
* [http://hyrel3d.net/papers/Low-Cost,_Single_Platform,_Hybrid_Mfg_System_for_Hybrid_Passives.pdf A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/55685/LE-DISSERTATION-2016.pdf Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies], A Dissertation Presented to The Academic Faculty of [https://www.ece.gatech.edu/ The School of Electrical and Computer Engineering at Georgia Tech]<br />
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications] by a team from [http://www.gatech.edu/ Georgia Tech]<br />
<br />
== NTM, 2015 ==<br />
<br />
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7347155 A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [http://hyrel3d.net/papers/RFID_Tag_Combining_3D_and_Inkjet_Printing.pdf Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies], [http://digital-library.theiet.org/content/journals/iet-map The IET Digital Library].<br />
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]<br />
* [https://ieeexplore.ieee.org/document/7345870 RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]<br />
<br />
== '''[[Reservoir_Heads|Unheated or Chilled Reservoir Printing]]''' ==<br />
<br />
Also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP'''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction).<br />
<br />
== DIW/SEP/SSE, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aenm.202304287 High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst] by a team from the [https://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal−CNRS, University of Bordeaux], [https://www.sydney.edu.au/engineering/schools/school-of-chemical-and-biomolecular-engineering.html School of Chemical and Biomolecular Engineering, The University of Sydney], and the Schools of [https://www.unsw.edu.au/engineering/our-schools/chemical-engineering Chemical Engineering] and [https://www.unsw.edu.au/engineering/our-schools/biomedical-engineering Biomedical Engineering] of the [https://www.unsw.edu.au/ University of New South Wales (UNSW)]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.55236 Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4991&context=open_etd Design and Customization of 3D Printers for Advanced Materials Printing], a Master's Thesis submitted to the [https://www.utep.edu/ University of Texas at El Paso]<br />
* [https://www.mdpi.com/2079-6374/14/1/56 Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor] by a team from the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0963996924001054 Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins] by a team from the [https://www.ubiobio.cl/ Universidad del Bío-Bío, Chile]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723009199 Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures] by a team from [https://www.iitmandi.ac.in/schoolpage.php?id=SCS School of Chemical Sciences, Indian Institute of Technology Mandi] and [https://homep.yu.ac.kr/en/academic/index.php?c=academic_01_c_10 School of Chemical Engineering, Yeungnam University]<br />
<br />
== DIW/SEP/SSE, 2023 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]<br />
* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979723022580 Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size] by a team from the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202300773 DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components] by a team from [http://lboro.ac.uk/ Loughborough University, UK]<br />
* [https://www.cell.com/matter/pdf/S2590-2385(23)00503-9.pdf Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures] by a team from [https://www.tamu.edu/ Texas A&M University]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-31694-4_7 Peritoneal Implants and Drug Delivery] by a team from several departments of [https://gcuf.edu.pk/ Government College University, Faisalabad, Pakistan], [https://gcu.edu.pk/ Government College University, Lahore, Pakistan], and [https://uol.edu.pk/ University of Lahore, Lahore, Pakistan]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0144861723010512 A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles] by a team from the [https://www.unifi.it/ University of Florence] and the [https://www.unistra.fr/ Université de Strasbourg, France]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423004554 Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing] by a team from [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)] and from [https://www.tamu.edu Texas A&M University]'s departments of [https://engineering.tamu.edu/chemical/ Chemical Engineering] and [https://engineering.tamu.edu/materials/ Materials Science & Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300272 Multimaterial Hydrogel 3D Printing] by a team from [https://www.auckland.ac.nz/en/science/about-the-faculty/school-of-chemical-sciences.html School of Chemical Sciences The University of Auckland]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/mame.202300151 Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement] by a team from several departments of [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223032649 Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach] by a team from the [https://www.iittp.ac.in/people/faculty/mechanical-engineering-department Department of Mechanical Engineering, Indian Institute of Technology Tirupati]<br />
* [https://www.science.org/doi/pdf/10.1126/sciadv.adi8643 Ultrasensitive and Robust Mechanoluminescent Living Composites] by a team from multiple departments of the [https://ucsd.edu/ University of California, San Diego] and from the [https://iop.uva.nl/wzi/wzi.html Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.3c11742 Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures] by a team from the [https://www.nasa.gov/marshall/ NASA Marshall Space Flight Center] and [https://www.gatech.edu/ Georgia Tech]'s [https://www.chbe.gatech.edu/ School of Chemical and Biomolecular Engineering] and [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235294072300210X 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective] by a team from [https://ati.ec.europa.eu/technology-centre/list-materials-research-and-technologies-mrt Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST)] and several departments at [https://www.kaust.edu.sa/en/ King Abdullah University of Science and Technology]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202307279 Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers] by a team from the [https://cl.haust.edu.cn/ School of Materials Science and Engineering, Henan University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223018060 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications] by a team from several locations of the [https://en.wikipedia.org/wiki/Indian_Institutes_of_Technology Indian Institutes of Technology] and from [https://www.morganadvancedmaterials.com Morgan Advanced Materials, State College, PA]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00457-9 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering] by a team from [https://utk.edu/iamm/ The University of Tennessee, Knoxville, TN] and [https://www.ndsu.edu/ North Dakota State University, Fargo, ND]<br />
* [https://www.researchgate.net/profile/Koshovyi-Oleh/publication/373099339_SEMI-SOLID_EXTRUSION_3D-PRINTING_OF_EUCALYPT_EXTRACT-LOADED_POLYETHYLENE_OXIDE_GELS_INTENDED_FOR_PHARMACEUTICAL_APPLICATIONS/links/64e44d0d0acf2e2b52098b26/Semi-solid-extrusion-3D-printing-of-eucalypt-extract-loaded-polyethylene-oxide-gels-intended-for-pharmaceutical-applications.pdf Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia], [https://en.nuph.edu.ua/ National University of Pharmacy, Kharkiv, Ukraine], [https://www.ifnmu.com/ Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine], and [https://curifylabs.com/ CurifyLabs, Helsinki, Finland]<br />
* [https://scholarship.rice.edu/bitstream/handle/1911/115252/KHATER-DOCUMENT-2023.pdf?sequence=1 Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites], a PhD thesis submitted to [https://www.rice.edu Rice University]<br />
* [https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/jace.19408 Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence] by a team from the [https://www.afrl.af.mil/ US Air Force Research Laboratory]<br />
* [https://www.proquest.com/openview/cd09c5c8d49df82041c26e915348b322/1?pq-origsite=gscholar&cbl=18750&diss=y Polymer/Coal Composites from Ink-based Additive Manufacturing], a Masters thesis submitted to [https://www.asu.edu/ Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2468519423002999 A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries] by a team from [https://www.ornl.gov/eeid Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences, Oak Ridge National Laboratory], and [https://engineering.case.edu/mechanical-and-aerospace-engineering Department of Mechanical and Aerospace Engineering, Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666964123000243 Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Kharkiv, Ukraine], [https://curifylabs.com/ CurifyLabs], and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine<br />
* [https://www.nature.com/articles/s41528-023-00272-1#MOESM1 Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training] by a team from [http://me.zju.edu.cn/meenglish/15428/list.htm College of Mechanical Engineering, Zhejiang University of Technology], [https://www.colorado.edu/mechanical/ Department of Mechanical Engineering, University of Colorado Boulder], and [http://www.isee.zju.edu.cn/iseenglish/main.psp College of Information Engineering, Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0260877423002856 Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets] by a team from the Universidad del Bío-Bío, Chile and [https://www.usach.cl/ Universidad de Santiago de Chile]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00415-5#author-information On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints] by a team from [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University, Fargo], [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory], and multiple departments of [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.osti.gov/servlets/purl/1992584 Carbon Scaffold Architectures for Stable Lithium Metal Anodes], a paper from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaenm.3c00324 Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage] by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2405886623000416 Drug Delivery and Testing via 3D Printing] by a team from the [https://www.copuhsr.in/ College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak] and [https://mdu.ac.in/Department/DepartmentHome.aspx?Dept=29 Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00407-5#author-information On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW)] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://novagard.com/ Novagard Solutions], and the [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsaem.3c01418 Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts] by a team from [https://duytan.edu.vn/ Duy Tan University, Vietman], [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore], [https://en.huji.ac.il/ The Hebrew University of Jerusalem, Jerusalem , Israel], and [https://www.cityu.edu.hk/ City University of Hong Kong, China]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813023027307 D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results] by a team from [https://zonguldakbilsem.meb.k12.tr/ Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul], [https://www.marmara.edu.tr/en Marmara University], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa], [https://halic.edu.tr/en Halic University], [https://www.ku.edu.tr/en/ Koç University], [https://suleymanyalcinsh.saglik.gov.tr/?_Dil=2 Goztepe Prof. Dr. Suleyman Yalcin City Hospital], and [https://international.arel.edu.tr/ Istanbul Arel University], all in Turkey<br />
* [https://www.mdpi.com/2310-2861/9/7/547 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom] by a team from multiple departments of the [https://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.54277 PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing] by a team from [https://upd.edu.ph/ University of the Philippines Diliman], [https://www.utk.edu/ University of Tennessee, Knoxville], [https://case.edu/ Case Western Reserve University], [https://www.ndsu.edu/ North Dakota State University], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127523004793 Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives] by a team from [https://sas.sastra.edu/centab/ TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India] and [https://www.ucl.ac.uk/surgery/research-department-orthopaedics-and-musculoskeletal-science Orthopaedics and Musculoskeletal Sciences, Univeristy College, London]<br />
* [https://www.sciencedirect.com/science/article/pii/S0928098723001173 Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity] by a team from [https://ut.ee/en/institute-pharmacy Institute of Pharmacy, Faculty of Medicine, University of Tartu], [https://en.nuph.edu.ua/ The National University of Pharmacy, Ukraine], and [https://curifylabs.com/ Curify Labs, Finland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0272884223014670 Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200332 Shape Memory Soft Robotics with Yield Stress Fluids] by a team from the [https://www.uva.nl/en University of Amsterdam] and the [https://www.tue.nl/en/ Eindhoven University of Technology (TU Eindhoven)]<br />
* [https://pubs.acs.org/doi/full/10.1021/acsami.2c23028 Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and the [https://www.hcii.cmu.edu/ Human Computer Interaction Institute] of [https://www.cmu.edu/ Carnegie Mellon University], and from the [https://www.isr.uc.pt/ Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.mdpi.com/2079-4983/14/5/251 Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering] by a team from the [https://www.engr.colostate.edu/me/ Department of Mechanical Engineering], the [https://compsci.colostate.edu/ Department of Computer Science], the [https://www.engr.colostate.edu/sbme/ School of Biomedical Engineering] and the [https://mathematics.colostate.edu/ Department of Mathematics] of [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0014305723002884 In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds] by a team from the [https://bioeng.yildiz.edu.tr/page/DEPARTMENT/About/78 Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University], the [https://biomatter.ulb.be/ BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles], the [http://iso.xynu.edu.cn/en/pages?cid=1&pid=1&pages_id=76 College of Life Sciences, Xinyang Normal University (XYNU)], and the [https://nbuam.marmara.edu.tr/en Center for Nanotechnology and Biomaterials Application & Research (NBUAM)], [https://mte.eng.ua.edu/ Department of Metallurgical and Materials Engineering], and [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-pharmaceutical-basic-sciences, Faculty of Pharmacy] of [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0023643823003766 Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing] by a team from [https://www.ubiobio.cl/w/ Universidad del Bío-Bío] and [https://www.uchile.cl/ Universidad de Chile]<br />
* [https://dl.acm.org/doi/pdf/10.1145/3544548.3580638 EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces] by a team from different departments of [https://www.cmu.edu/ Carnegie Mellon University]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/12484/124840B/Additive-manufacturing-of-highly-flexible-impact-wave-propagation-sensor/10.1117/12.2664163.short Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor] by a team from [https://www.lanl.gov/ Los Alamos National Laboratory] and [https://www.utep.edu/ The University of Texas at El Paso]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c00389 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering] by a team from the [https://iith.ac.in/ Indian Institute of Technology (IIT) Hyderabad,]'s [https://people.iith.ac.in/subharath/index.html Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering] and [https://msme.iith.ac.in/ Department of Materials Science and Metallurgical Engineering], as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200402 Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering] and [https://www.hcii.cmu.edu/ Human-Computer Interaction Institute] and the [https://www.umass.edu/engineering/academics/departments/mechanical-and-industrial-engineering Mechanical and Industrial Engineering Department, University of Massachusetts]<br />
* [http://200.9.65.36/index.php/JBTH/article/download/286/224 A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines] by a team from [https://www.senaicimatec.com.br/en/sobre/ SENAI CIMATEC University Center, Brazil]<br />
* [https://www.mdpi.com/2072-666X/14/4/762 Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications] by a team from the [https://www.insa-lyon.fr/en/insa-lyon Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon] and [https://www.tescagroup.com/en/ TESCA-Group]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323016115 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology] by a team from the [https://www.tntech.edu/engineering/programs/che/ Department of Chemical Engineering, Tennessee Technical University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.2c01075 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones] by a team from various departments of the [https://www.iitkgp.ac.in/ Kharagpur], [https://iitgn.ac.in/ Gandhinagar], and [https://www.iitbhu.ac.in/ Varanasi (BHU)] campuses of the [https://www.iitsystem.ac.in/ Indian Institutes of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785323009240 Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials] by a team from [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Tech University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202201421 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment] by a team from [https://www.asu.edu/ Arizona State University]'s [https://poly.engineering.asu.edu/ The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering], [https://sbhse.engineering.asu.edu/faculty/ Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE)], and[https://msn.engineering.asu.edu/ The School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering]; from [https://www.mayoclinic.org/patient-visitor-guide/arizona The Mayo Clinic]'s Arizona departments of [https://www.mayo.edu/research/departments-divisions/department-immunology/overview Department of Immunology], [https://www.mayo.edu/research/labs/head-and-neck-regenerative-medicine/overview Head and Neck Regenerative Medicine Laboratory], [https://www.mayoclinic.org/departments-centers/obstetrics-gynecology/sections/overview/ovc-20423739 Department of Medical and Surgical Gynecology], and [https://www.mayoclinic.org/departments-centers/ent-head-neck-surgery/sections/overview/ovc-20424084 Division of Laryngology, Department of Otolaryngology]; and the [https://gondabrain.biu.ac.il/en/node/1 Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University]<br />
* [https://link.springer.com/article/10.1557/s43579-023-00343-4 Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials] by a team from the following organizations: [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], [https://novagard.com/ Novagard Solutions], [https://cimav.edu.mx/en/research/monterrey-unit/ Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey)], [https://research.utk.edu/iamm/ Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://mse.utk.edu/ Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville], [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory]<br />
* [https://link.springer.com/article/10.1007/s00170-023-11091-z Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications] by a team from the [https://www.ihu.gr/en/enhome International Hellenic University] and the [https://www.certh.gr/root.en.aspx Centre for Research and Technology Hellas (CERTH)]<br />
* [https://www.mdpi.com/1999-4923/15/3/737/pdf A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract] by a team primarily from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221923001577 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers] by a team from the [https://www.insa-lyon.fr/en/ INSA-Lyon] and [https://www.thalesgroup.com/en/global/innovation/research-and-technology Thales Research & Technology]<br />
* [https://iopscience.iop.org/article/10.1149/2754-2726/acbe0c/pdf Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays] by a team from the [https://physics.yale.edu/ Department of Physics, Yale University] and the [https://cmem.unm.edu/ Center for MicroEngineered Materials, University of New Mexico]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884223003978 Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur], [https://www.iitbhu.ac.in/ (BHU) Varanasi], and [https://iitgn.ac.in/ Gandhinagar] campuses, and well as the [https://www.vssc.gov.in/ Vikram Sarabhai Space Centre]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4669&context=open_etd Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites], a Master's thesis submitted to the [https://www.utep.edu/programs/undergraduate/mechanical-engineering.html Department of Mechanical Engineering, University of Texas at El Paso]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423000386 Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures] by a team from [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory], [https://sites.nationalacademies.org/PGA/RAP/index.htm National Research Council Research Associate Program], [https://www.ues.com/ UES, Inc.], [https://www.soche.org/ Strategic Ohio Council for Higher Education], and [https://www.ge.com/research/ General Electric Research]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.2c05423 Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures] by a team from the [https://enme.umd.edu/ Department of Mechanical Engineering of the University of Maryland]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2352710223000530 Nanomechanical Characterization of 3D Printed Cement Pastes] by a team from [https://www.vanderbilt.edu/ Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering] and [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environment Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207673 Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks] by a team from the [https://chem.washington.edu/ Department of Chemistry, University of Washington] and the [https://www.chem.columbia.edu/ Department of Chemistry, Columbia University]<br />
<br />
== DIW/SEP/SSE, 2022 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0958946522004875 Halloysite Reinforced 3D-printable Geopolymers] by a team from [https://www.dtu.dk/english The Technical University of Denmark]'s Departments of [https://orbit.dtu.dk/en/organisations/department-of-civil-and-mechanical-engineering Civil & Mechanical Engineering], [https://www.fysik.dtu.dk/english Physics], [https://www.healthtech.dtu.dk/english Heath Technology], and [https://www.nanolab.dtu.dk/english Nanolab], as well as the [https://www.imperial.ac.uk/civil-engineering/ Department of Civil and Environmental Engineering, Imperial College London]<br />
* [https://iopscience.iop.org/article/10.1088/2058-8585/aca813/meta Direct Ink Write 3D printing of Wave Propagation Sensor] by a team from [http://lanl.gov Los Alamos National Laboratory] and from [http://utep.edu The University of Texas at El Paso<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5948 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials] by a team from the [https://www.nrl.navy.mil/chemistry/ Chemistry Division, U.S. Naval Research Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886622000598 MultimodalIimaging Compatible Micro-Physiological System] by a team from [https://www.texaschildrens.org/departments/radiology Department of Radiology, Texas Children's Hospital] and [https://www.bcm.edu/ Baylor College of Medicine]'s Departments of [https://www.bcm.edu/departments/radiology Radiology] and [https://www.bcm.edu/academic-centers/dan-l-duncan-comprehensive-cancer-center/research/programs/pediatric-cancer-program Pediatrics-Oncology]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422006376 Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials] by a team from [https://purdue.edu/ Purdue University]'s [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology], [https://engineering.purdue.edu/MSE School of Materials Engineering], and [https://engineering.purdue.edu/IE School of Industrial Engineering],<br />
* [https://www.proquest.com/openview/94671663c312abf32560fbd499dcfdfe/ Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups] by a team from [https://lgef.insa-lyon.fr/ Laboratoire de Génie Electrique, INSA Lyon] and [https://hybria.fr/en/home/ Hybria Institute of Business and Technologies, Écully Campus]<br />
* [https://www.researchgate.net/profile/Josh-Kacher/publication/355675319_Fabrication_of_3D_Printed_Complex_Concentrated_Alloys_using_Oxide_Precursors/links/6320eccf071ea12e362ecfdc/Fabrication-of-3D-Printed-Complex-Concentrated-Alloys-using-Oxide-Precursors.pdf Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors] by a team from [http://gatech.edu Georgia Tech]'s [https://www.mse.gatech.edu/ School of Materials Science and Engineering] and [https://bme.gatech.edu/bme/ Department of Biomedical Engineering]<br />
* [https://link.springer.com/article/10.1557/s43579-022-00287-1 3D-Printed PDMS-based Membranes for CO<sub>2</sub> Separation Applications] by a team from [https://www.ornl.gov/ Oak Ridge National Labratory]'s [https://www.ornl.gov/facility/cnms Center for Nanophase Materials and Sciences] and [https://www.ornl.gov/division/csd Chemical Sciences Division], the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences and Engineering, Case Western Reserve University], the [https://research.utk.edu/iamm/ Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park], the [https://dmmme.coe.upd.edu.ph/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines], the [https://www.ndsu.edu/cpm/ Department of Coatings and Polymeric Materials, North Dakota State University], and [https://www.utk.edu/ University of Tennessee, Knoxville]'s [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering] and [https://chem.utk.edu/ Department of Chemistry]<br />
* [https://www.osti.gov/servlets/purl/1890799 Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures], by [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
* [https://sigma.yildiz.edu.tr/storage/upload/pdfs/1663838519-en.pdf Controlled Release of Metformin-Loaded SA/PEG Scaffolds] produced by 3D-Printing Technology], published by [https://eds.yildiz.edu.tr/ Yildiz Technical University Press]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.2c00860 Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting] by a team from the [https://www.uliege.be/ University of Liège]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322058175 Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids] by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214785322057832 Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators] by a team from [https://www.sutd.edu.sg/ Singapore University of Technology and Design]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0104157 Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing] by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, [https://www.tamu.edu/ Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008622322006868 Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing] by a team from The [https://engineering.tamu.edu/chemical/index.html Artie McFerrin Department of Chemical Engineering, Texas A&M University], the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University], the [http://muhendislik.ibu.edu.tr/en/why-baibu-chemical-engineering Chemical Engineering Department, Bolu Abant Izzet Baysal University], and the [https://www.a-star.edu.sg/simtech Singapore Institute of Manufacturing Technology (SIMTech)]<br />
* [https://scholar.google.com/scholar_url?url=https://www.mdpi.com/2306-5354/9/9/427/pdf%3Fversion%3D1661869124&hl=en&sa=X&d=1828361201704350979&ei=o3gWY8WsDIb8mgH5oriQBA&scisig=AAGBfm3XydQrjeBnA473zBh-0MJxCbNsbw&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AAGBfm0hqG-y34efSCz-aq4CU02MDP_njA&html=&pos=0&folt=kw 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marama University's] [https://nbuam.marmara.edu.tr/en Center for Nanotechnology & Biomaterials Application and Research (NBUAM)], [https://fbe.marmara.edu.tr/en/ Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences], [https://eczacilik.marmara.edu.tr/en/departments/basic-pharmaceutical-sciences/department-of-biochemistry Department of Biochemistry, Faculty of Medicine], [https://www.marmara.edu.tr/en/academic/faculties/school-of-medicine Department of Medical Microbiology, Faculty of Medicine], and from [https://upb.ro/en/ University Politehnica of Bucharest's] [http://en.chimie.upb.ro/departamente/stiinta-si-ingineria-materialelor-oxidice-si-nanomaterialelor Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science], [https://www.micronanotech.ro/en/ National Centre for Micro- and Nanomaterials], [https://foodsafety.upb.ro/en/ National Centre for Food Safety], and [http://en.chimie.upb.ro/departamente/chimie-anorganica-chimie-fizica-si-electrochimie Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science]<br />
*[https://www.proquest.com/openview/f574e06bd82c5d4d2bfcedd085efab1e/1.pdf?pq-origsite=gscholar&cbl=18750&diss=y Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements], a PhD dissertation submitted to the [https://www.binghamton.edu/mse/graduate/index.html Materials Science and Engineering Department of Binghamton University, State University of New York]<br />
*[https://link.springer.com/article/10.1557/s43579-022-00209-1 Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles] by a team from [https://www.chbe.gatech.edu/ the Georgia Tech School of Chemical & Biomolecular Engineering]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsanm.2c02498 Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds] by a team from [https://cimav.edu.mx/en/ CIMAV - Subsede Monterrey and Chihuahua] and [https://www.uanl.mx/en/ Universidad Autónoma de Nuevo León]<br />
* [https://digitalcommons.georgiasouthern.edu/pcec-research-symposium/2022/2022/31/ Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials] by a team from [https://www.georgiasouthern.edu/ Georgia Southern University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202200534 A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics] by a team from the [https://www.meche.engineering.cmu.edu/ Department of Mechanical Engineering, Carnegie Mellon University] and the [https://www.uc.pt/en/fctuc/deec/Department Department of Electrical Engineering, University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979722012097 Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates] by a team from the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and the [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program ] of the [https://sc.edu/ University of South Carolina]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202200485 Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors] by a team from the [https://polytechnic.purdue.edu/schools/engineering-technology School of Engineering Technology, Purdue University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.2c00313 Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications] by a team from the [https://www.nus.edu.sg/ National University of Singapore]<br />
* [https://link.springer.com/chapter/10.1007/978-3-031-06116-5_26 Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments] by a team primarily from the [https://engineering.purdue.edu/CE Lyles School of Civil Engineering, Purdue University]<br />
* [https://pubs.rsc.org/en/content/articlehtml/2022/ra/d2ra02009b 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes] by a team from the [https://utk.edu/ University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922004800#ab0015 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability] by a team from [https://cimav.edu.mx/investigacion/subsede-monterrey/quimica-de-materiales-polimeros-y-sufractantes/laboratorio-3d-lab/ Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey)] and [https://cimav.edu.mx/en/research/department-of-engineering-and-materials-chemistry/ Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua)] in Mexico<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0008884622001582 2D Stationary Computational Printing of Cement-based Pastes] by a team from the [https://www.tntech.edu/engineering/programs/che/index.php Department of Chemical Engineering, Tennessee Technological University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022011424 Investigation of 3D-printed Chitosan-Xanthan Gum Patches] by a team from ten universities from Turkey, Poland, India, and the UK.<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/66669/STIERS-THESIS-2022.pdf?sequence=1 Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors], a thesis presented to [https://www.mse.gatech.edu/ Georgia Tech School of Materials Science and Engineering]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0254058422004783 Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study] by a team from the [https://www.lanl.gov/org/ddste/aldcels/chemistry/chemical-diagnostics-engineering/index.php Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory], the [https://www.gnu.ac.kr/eng/cm/cntnts/cntntsView.do?mi=8542&cntntsId=4512 Future Convergence Technology Research Institute, Gyeongsang National University], and the [https://eng.kist.re.kr/kist_eng/main/ Korean Institute of Science and Technology]<br />
* [https://www.nature.com/articles/s41893-022-00847-2 Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability] by a team from the Departments of [https://engineering.uci.edu/dept/cbe Chemical and Biomolecular Engineering], [https://engineering.uci.edu/dept/mse Materials Science and Engineering], and [https://www.chem.uci.edu/ Chemistry] of the [https://www.uci.edu/ University of California, Irvine]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsnano.2c00378 Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS<sub>2</sub> Ink] by a team from the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] and the Departments of [https://www.ece.ucr.edu/ Electrical and Computer Engineering] and [https://www.cee.ucr.edu/ Chemical and Environmental Engineering] of the [https://www.ucr.edu/ University of California, Riverside]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001889 Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials], by a team from the US [https://www.nist.gov/ National Institute of Science and Technology (NIST)] and the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/engineering/programs/ece/index.php Electrical and Computer Engineering] of [https://www.tntech.edu/ Tennessee Technological University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/08853282211073904 Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity], by a team from the Schools of [https://www.research.colostate.edu/samd/ Advanced Materials Discovery] and [https://www.engr.colostate.edu/sbme/ Biomedical Engineering] from [https://www.colostate.edu/ Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221922001662 UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, US Air Force Research Laboratory]<br />
* [https://link.springer.com/article/10.1007/s42242-022-00182-7 Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review] by a team from [https://www.mace.manchester.ac.uk/ Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester]<br />
* [https://openjournals.ljmu.ac.uk/index.php/JNPD/article/download/654/422 The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms] by [https://www.ljmu.ac.uk/research/centres-and-institutes/centre-for-natural-products-discovery Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University]<br />
* [https://www.divouxlab.cnrs.fr/publications/Cellulose_22_CNC_epoxy_sm.pdf Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening] by a team from the [http://meche.mit.edu/ Department of Mechanical Engineering] and [https://cee.mit.edu Department of Civil and Environmental Engineering] of the [https://web.mit.edu/ Massachusetts Institute of Technology (MIT)]<br />
* [https://academic.oup.com/jpp/advance-article-abstract/doi/10.1093/jpp/rgab168/6534282 Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective] by a team from the [https://www.sydney.edu.au/medicine-health/schools/sydney-pharmacy-school.html School of Pharmacy, Faculty of Medicine and Health, University of Sydney], [https://us.pg.com/ Procter & Gamble], and [https://www.fit.edu/engineering-and-science/academics-and-learning/mathematical-sciences/ Department of Mathematical Sciences, Florida Institute of Technology]<br />
* [https://www.mdpi.com/2073-4360/14/4/733/htm Wood Warping Composite by 3D Printing] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202112914 Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels] by a team from [http://chyn.de/ Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN)], [https://www.cui.uni-hamburg.de/en.html The Hamburg Centre for Ultrafast Imaging], [https://www.desy.de/research/cooperations__institutes/cxns/index_eng.html Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY], [https://www.helmholtz-imaging.de/ Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY], and [https://www.chemie.uni-hamburg.de/en/institute/ac.html Institute of Inorganic and Applied Chemistry, University of Hamburg]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.1c20938 High-Temperature Interactions of Metal Oxides and a PVDF Binder] by a team from [https://www.umd.edu/ University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000756 3D Printing of Ecologically Active Soil Structures] by a team from the [https://www.virginia.edu/ University of Virginia]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813022002665 In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics] by a team from [https://www.marmara.edu.tr/en Marmara University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422000835 Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer] by a team from [https://ucsd.edu/ University of California, San Diego]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.12200.pdf Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration] by a team from [https://www.cmu.edu/ Carnegie Mellon University], the [https://en.huji.ac.il/en Hebrew University of Jerusalem], and [https://www.bezalel.ac.il/en Bezalel Academy of Art and Design]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c04157 Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation] by a tem from the [https://www.ucr.edu/ University of California, Riverside], [https://www.gatech.edu/ Georgia Tech], and the [https://www.umd.edu/ University of Maryland]<br />
* [https://trace.tennessee.edu/cgi/viewcontent.cgi?article=8029&context=utk_graddiss Processing of Preceramic Polymers for Direct-Ink Writing], a PhD dissertation submitted to [https://www.utk.edu/ University of Tennessee, Knoxville]<br />
* [https://arxiv.org/ftp/arxiv/papers/2201/2201.09666.pdf Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers], by a team from the [https://balandingroup.ucr.edu/ Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside], the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside], and the [https://www.chem.uga.edu/ Department of Chemistry, University of Georgia] <br />
* [https://www.proquest.com/openview/b6e1fae09e770ff9d338bb96ea682375/1?pq-origsite=gscholar&cbl=18750&diss=y Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine], a PhD dissertation submitted to [https://che.northeastern.edu/ Northeastern University's Department of Chemical Engineering]<br />
<br />
== DIW/SEP/SSE, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S0008884621001472 Rheological Characterization of 3D Printable Geopolymers] by a team from several departments of the [https://www.dtu.dk/english/ Technical University of Denmark], [https://www.imperial.ac.uk/civil-engineering/ Civil and Environmental Engineering, Imperial College London], and [https://www.regenerative-biomaterials.nl/ Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202103309 Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer] by a team from [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)] and [https://www.sabic.com/en/about/innovation/our-technology-Innovation-centers T&I, SABIC], both in The Netherlands.<br />
*[https://iopscience.iop.org/article/10.1088/2058-8585/ac442e/meta Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors] by a team from the [https://www.utep.edu/ University of Texas at El Paso] and the [https://kcnsc.doe.gov/ U.S. Department of Energy's Kansas City National Security Campus]<br />
*[https://iopscience.iop.org/article/10.1088/1361-6528/ac40bc/meta Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference] by a team from several departments of the [http://www.buffalo.edu/ State University of New York at Buffalo]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsami.1c20348 Patterned Actuators via Direct Ink Writing of Liquid Crystals] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology] and the [https://ioe.iitm.ac.in/project/responsive-soft-matter/ Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai]<br />
*[https://www.sciencedirect.com/science/article/pii/S0023643821020843 Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing] by a team from [http://www.ubiobio.cl/w/# Food Engineering Department, Universidad del Bío-Bío] and [https://www.uchile.cl/portal/english-version/faculties-and-institutes/62838/faculty-of-chemical-sciences-and-pharmacy Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile]<br />
*[https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202100974 3D Printing of Transparent Silicone Elastomers] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]<br />
*[https://iopscience.iop.org/article/10.1088/1758-5090/ac3d75/meta Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink] by a team from the [https://www.ufl.edu/ University of Florida]<br />
*[https://www.sciencedirect.com/science/article/pii/S2667025921000315 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering] by a team from [https://www.marmara.edu.tr/en Marmara University] and [https://www.yildiz.edu.tr/en/ Yildiz Technical University]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.202100231 Factors Affecting Substrate Heating with Printed Thermites] from Dr. Matthew Ervin, [https://www.arl.army.mil/ US Army Research Laboratory]<br />
*[https://www.sciencedirect.com/science/article/pii/S2666964121000266 Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.ut.ee/en University of Tartu] and the [https://www.helsinki.fi/en University of Helsinki]<br />
*[https://www.sciencedirect.com/science/article/pii/S2590006421000284 Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing] by a team from the [https://materials.technion.ac.il/en/Research/bio-inspired-surface-engineering-and-biomineralization-lab-2/ Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University]<br />
*[https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.17412 Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles] by a team from [http://gatech.edu Georgia Tech]'s schools of [https://www.mse.gatech.edu/ School of Material Science and Engineering] and [https://chbe.gatech.edu/ School of Chemical and Biomolecular Engineering]<br />
*[https://commons.erau.edu/cgi/viewcontent.cgi?article=1628&context=edt Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance], a thesis submitted for a [https://erau.edu/degrees/phd/aerospace-engineering PhD in Aerospace Engineering at Embry-Riddle Aeronautical University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsbiomaterials.1c00483 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure] by a team primarily from [http://www.oc.uni-koeln.de/emain.html Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne] <br />
*[https://arxiv.org/pdf/2108.08747.pdf Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening] by a team from [http://meche.mit.edu/ Department of Mechanical Engineering, Massachusetts Institute of Technolog], [http://www.crpp.cnrs.fr/en/home-page/ Centre de Recherche Paul Pascal, CNRS], and [https://umi.mit.edu/thelab MultiScale Material Science for Energy and Environment, CNRS-MIT]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421003602#! 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications] by a team primarily from [https://www.insa-lyon.fr/en/ INSA-Lyon, France]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsabm.1c00616 Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel] by a team from [http://www.sysu.edu.cn/en/index.htm Sun Yat-sen University, Guangzhou, China]<br />
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]<br />
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]<br />
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University] <br />
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0160791X21001433 Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence] by a team from [https://www.ucl.ac.uk/ University College London] and [https://www.sussex.ac.uk/ University of Sussex]<br />
*[https://arxiv.org/ftp/arxiv/papers/2107/2107.04146.pdf Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials], by a team from [https://www.ucr.edu/ University of California, Riverside] and [https://www.unl.edu/ University of Nebraska, Lincoln]<br />
*[https://www.nature.com/articles/s41598-021-93852-y Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://www.unt.edu/ University of North Texas]<br />
*[https://drum.lib.umd.edu/bitstream/handle/1903/27406/Rehwoldt_umd_0117E_21544.pdf Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions], a PhD dissertation presented to the [http://www.chem.umd.edu/ University of Maryland Department of Chemistry and Biochemistry]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsmaterialslett.1c00132 Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers] by a team from [https://www.ornl.gov/ Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences], and the [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering of the University of Tennessee]<br />
*[https://smartech.gatech.edu/bitstream/handle/1853/64876/ADAMS-UNDERGRADUATERESEARCHOPTIONTHESIS-2021.pdf?sequence=1 Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing], an undergraduate paper submitted to [http://gatech.edu Georgia Tech]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S1364032121006559 The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review] by a team from [https://en.szu.edu.cn/ Shenzhen University]<br />
*[https://doi.org/10.2341/19-286-L Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite] by a team from the [https://www.augusta.edu/dentalmedicine/academics/departments/restorative/ Department of Restorative Sciences, Dental College of Georgia at Augusta University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]<br />
*[https://www.pnas.org/content/118/23/e2020160118 Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science and Engineering, Northwestern University] and [https://www.aps.anl.gov/Sector-3 Advanced Photon Source, Sector 3, Argonne National Laboratory]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002141 Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites] by a team from the [https://www.utk.edu/ University of Tennessee, Knoxville], [https://www.gatech.edu/ Georgia Institute of Technology], and [https://www.afrl.af.mil/ Air Force Research Laboratory]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/00219983211002237 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
*[https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.1c00553 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization] by a team from the [https://en.huji.ac.il/en Hebrew University of Jerusalem] and [https://www.polito.it/?lang=en Politecnico di Torino]<br />
*[https://ieeexplore.ieee.org/abstract/document/9439529 Additive Manufacturing of Hetero-Magnetic Coupled Inductors] by a team from [https://vt.edu/ Virginia Polytechnic Institute and State University]<br />
*[https://www.sciencedirect.com/science/article/abs/pii/S2214860421002086 On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing] by a team from [https://case.edu/ Case Western Reserve University], [http://www.usc.edu.ph/ University of San Carlos, Philippines], [https://www.adamson.edu.ph/2018/ Adamson University, Philippines], [https://www.utk.edu/ University of Tennessee, Knoxville], and [https://www.ornl.gov/ Oak Ridge National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0141813021009521#! Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review] by a team from [https://www.psgias.ac.in/ Tissue Engineering Laboratory, PSG Institute of Advanced Studies], [https://www.csir.res.in/csir-labs Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute], and [https://www.engr.colostate.edu/me/2016/01/27/biomaterials-surface-micronano-engineering-laboratory/ Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S002197972100521X 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy]<br />
* [https://www.nature.com/articles/s41598-021-87072-7 Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays] by a team including members from several laboratories and departments of the [https://www.tu-darmstadt.de/index.en.jsp Technical University of Darmstadt] and the [https://www.tu-braunschweig.de/en/bbt/translate-to-english-biotechnologie Department of Biotechnology, Technical University of Braunschweig]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590238521001260?dgcid=coauthor Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites] by a team from the [https://engineering.tamu.edu/materials/index.html Department of Materials Science and Engineering, Texas A&M University] and [https://www.chem.tamu.edu/ Department of Chemistry, Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]<br />
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2021/ta/d0ta11341g/unauth#!divAbstract Direct Ink Writing of Recyclable and '''in situ''' Repairable Photothermal Polyurethane for Sustainable 3D Printing Development] by a team with members from several departments from [https://www.uwo.ca/ The University of Western Ontario], as well as from the [http://www.at0086.com/shanghu/College.aspx?c=266 School of Mechatronic Engineering and Automation, Shanghai University] <br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0021979721002204 Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing] by a team from [https://www2.chim.unifi.it/vp-110-about-the-department.html?newlang=eng CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy] <br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c18095 Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities] by a team from [https://eng.umd.edu/ Department of Mechanical Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S221486042100083X Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices] by a team from [https://www.waikato.ac.nz/study/subjects/engineering School of Engineering, The University of Waikato], [http://www.cacm.auckland.ac.nz/en/cacm.html Centre for Advanced Composite Materials, The University of Auckland], and [https://www.wgtn.ac.nz/design-innovation School of Design Innovation, Victoria University Wellington]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928493121001156 A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro] by a team from several departments of the [https://www.ohsu.edu/ Oregon Health and Science University] and the [https://masters.unige.ch/medicine#dental-medicine University of Geneva, University Clinic of Dental Medicine]<br />
* [https://www.biorxiv.org/content/biorxiv/early/2021/02/11/2021.02.10.430691.full.pdf Niche-guided Tissue Patterning by Chemomechanical Flow Lithography], by a team from [https://arctcibe.org/ ARC Training Centre for Innovative BioEngineering], [https://www.cmrijeansforgenes.org.au/ Embryology Unit, Children's Medical Research Institute, Sydney], [https://www.sydney.edu.au/medicine-health/schools/school-of-medical-sciences.html School of Medical Science, Faculty of Medicine and Health, The University of Sydney], [https://sms.unsw.edu.au/ EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney], and [https://bioe.uic.edu/ Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois]<br />
<br />
* [https://aip.scitation.org/doi/full/10.1063/9.0000103 Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications] by a team from [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Engineering and Natural Sciences, Bahcesehir University] and [https://www.pirireis.edu.tr/maritime-higher-vocational-school-mhvs Maritime Higher Vocational School, Piri Reis University]<br />
<br />
* [https://www.postersessiononline.eu/173580348_eu/congresos/WBC2020/aula/-WBC2020_3512_WBC2020.pdf Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials], by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.202008216 Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions] by a team from the [https://www.unsw.edu.au/ University of New South Wales]'s [https://www.acn.unsw.edu.au/ Centre for Nanomedicine], [http://www.materials.unsw.edu.au/ School of Materials Science and Engineering], and [https://www.sydney.edu.au/engineering/schools/school-of-aerospace-mechanical-and-mechatronic-engineering.html School of Aerospace, Mechanical and Mechatronic Engineering]<br />
<br />
== DIW/SEP/SSE, 2020 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420307041 Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing] by a team from [https://engineering.vanderbilt.edu/me/ The Mechanical Engineering Department of Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860420310733 Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]<br />
* [https://ieeexplore.ieee.org/abstract/document/9244494 Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine] by from the [http://www.mu-varna.bg/EN Medical University of Varna, Bulgaria]<br />
* [https://ieeexplore.ieee.org/abstract/document/9224960 Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components] by a team from [https://vt.edu/ Virginia Tech]'s [https://mse.vt.edu/ Department of Materials Science and Engineering], [https://ece.vt.edu/ Department of Electrical and Computer Engineering], and [https://cpes.vt.edu/ Center for Power Electronics Systems]<br />
* [https://www.sciencedirect.com/science/article/pii/S2238785420318160 Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Department of Material Science and Engineering] and the [https://www.tuskegee.edu/programs-courses/colleges-schools/cvm/cvm-department-of-pathobiology Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health] of [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.202005560 Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes] by a team from the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/ab99d4/meta Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures] by a team from the [https://polymer.ims.uconn.edu/ Polymer Program, Institute of Materials Science, University of Connecticut] and the [https://cbe.engr.uconn.edu/ Chemical and Biomolecular Engineering, University of Connecticut]<br />
* [https://www.freepatentsonline.com/y2020/0277195.html Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs] a patent application from the [https://www.molbiosci.northwestern.edu/ Department of Molecular Biosciences of Northwestern University]<br />
* [https://link.springer.com/article/10.1208/s12249-020-01790-1 Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors] by a team from the [https://www.fdu.edu/academics/colleges-schools/pharmacy/ School of Pharmacy and Health Sciences, Fairleigh Dickinson University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mabi.202000106 3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels] by a team from the Engineering departments of [https://career.ku.edu.tr/en/chemical-biological-engineering/ Koç University] and [https://bau.edu.tr/academic/12581-faculty-of-engineering-and-natural-sciences Bahcesehir University], both in Turkey<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306336 Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets] by a multi-disciplinary team from [https://vt.edu/ Virginia Tech]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0955221920306063#! Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering] by a team from the [https://www.alfred.edu/academics/colleges-schools/engineering/index.cfm Kazuo Inamori School of Engineering], [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm New York State College of Ceramics], [https://www.alfred.edu/ Alfred University, Alfred, NY]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0004120 Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices], a paper from the [https://afresearchlab.com/ US Air Force Research Laboratory] using a Nordson head on a Hyrel printer.<br />
* [https://cdn.vanderbilt.edu/vu-my/wp-content/uploads/sites/2814/2020/06/19085235/Neely_Dissertation.pdf Additively Manufactured Thermite-based Energetics: Characterization and Applications], a PhD dissertation submitted to the [https://engineering.vanderbilt.edu/me/ Mechanical Enginnering Department of Vanderbilt University]<br />
* [https://iopscience.iop.org/article/10.1088/1748-605X/aba40c/meta Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering)] by a team from the [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ Composite Biomaterial Systems Laboratory of the University of Waterloo]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353819335791 Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers] using a [https://www.nordson.com/en Nordson Ultimus™ V] dispenser on Hyrel equipment, by a team from [http://lanl.gov Los Alamos National Laboratory], [http://sandia.gov Sandia National Laboratory], and [https://www.natureindex.com/institution-outputs/south-korea/department-of-energy-engineering-gntech/595e2817140ba06b4e8b4569 Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000311 Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://patents.google.com/patent/US20200181014A1/en Cement-Based Direct Ink for 3D Printing of Complex Architected Structures ], a patent application by a team including members of [https://msne.rice.edu/ Department of Materials Science and NanoEngineering, Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c07331 Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators] by a team from the [https://msne.rice.edu/ Department of Materials Science and NanoEngineering of Rice University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.0c01497 Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://www.sciencedirect.com/science/article/pii/S2590123020300335 Enabling Compact GTL by 3D-Printing of Structured Catalysts] by a team from [https://www.uq.edu.au/ The University of Queensland]'s [https://www.chemeng.uq.edu.au/ School of Chemical Engineering] and [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology] and also by [http://www.apied.co/ The Australian Petroleum International Exploration and Development (APIED)]<br />
* [http://www.freepatentsonline.com/y2020/0109299.html Bio-Ink Structures and Methods of Producing the Same], a patent application by [https://www.llnl.gov Lawrence Livermore National Laboratory]<br />
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul<br />
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
<br />
== DIW/SEP/SSE, 2019 ==<br />
<br />
* [https://digitalcommons.fiu.edu/cgi/viewcontent.cgi?article=5481&context=etd Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites], a PhD paper submitted to [https://www.fiu.edu Florida International University]<br />
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]<br />
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]<br />
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]<br />
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].<br />
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]<br />
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]<br />
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.<br />
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu, Estonia]<br />
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem] <br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]<br />
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]<br />
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]<br />
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration] by a team by a team from [http://www.tamu.edu/ Texas A&M University]. <br />
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]<br />
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]<br />
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]<br />
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]<br />
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]<br />
<br />
== DIW/SEP/SSE, 2018 ==<br />
<br />
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]<br />
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]<br />
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]<br />
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]<br />
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].<br />
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]<br />
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].<br />
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''<br />
*[http://pubs.rsc.org/en/content/articlelanding/2018/mh/c8mh00296g#!divAbstract Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem].<br />
* [http://www.pnas.org/content/early/2018/05/11/1800298115.short Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols] by a team from [https://www.northwestern.edu/ Northwestern University]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.201800060 3D Printing of Hierarchical Porous Silica and α‐Quartz] by a team from [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg]<br />
* [http://www.freepatentsonline.com/y2018/0065310.html Polymeric Materials and Articles Manufactured There From] by a team from [https://us.pg.com/ Procter and Gamble]<br />
* [https://ieeexplore.ieee.org/abstract/document/8329484/?reload=true UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics] by a team from [http://vt.edu Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.jpcc.8b00580 Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion] by a team from [http://northwestern.edu Northwestern University]<br />
<br />
== DIW/SEP/SSE, 2017 ==<br />
<br />
* [https://static1.squarespace.com/static/59581b474c8b03b8a580b4ae/t/5a5c280bec212d764ffc3203/1515989014007/Bioink+Paper.pdf Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting] by a team by a team from three disciplines of [http://www.tamu.edu/ Texas A&M University].<br />
* [https://www.researchgate.net/profile/Manik_Chandra_Biswas2/publication/317318891_Feasibility_of_Printing_3D_Bone_Models_for_Education_at_TUCVM/links/5931e797aca272fc55093f49/Feasibility-of-Printing-3D-Bone-Models-for-Education-at-TUCVM.pdf Feasibility of Printing 3D Bone Models for Education at TUCVM] at [https://www.researchgate.net/ ResearchGate]<br />
* [http://ieeexplore.ieee.org/abstract/document/8095878/ Design and Additive Manufacturing of Multi-Permeability Magnetic Cores], by a team from [https://vt.edu Virginia Tech]<br />
* [http://pubs.acs.org/doi/full/10.1021/acsami.7b07189 Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders], by a team from [http://www.northwestern.edu/ Northwestern Univeristy]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/jbm.a.36184/full In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration], by a team from [https://uconn.edu The University of Connecticut]<br />
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by a team from [http://uq.edu.au University of Queensland]<br />
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]<br />
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]<br />
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].<br />
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]<br />
<br />
== DIW/SEP/SSE, 2016 ==<br />
<br />
*[https://pubs.acs.org/doi/pdf/10.1021/acsami.6b11643 High Performance, 3D-Printable Dielectric Nanocomposites for Millimeter Wave Devices] by a team from the [https://www.ll.mit.edu/ Lincoln Laboratory at the Massachusetts Institute of Technology (MIT)]<br />
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]<br />
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]<br />
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]<br />
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]<br />
<br />
== DIW/SEP/SSE, 2015 ==<br />
<br />
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]<br />
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]<br />
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]<br />
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== DIW/SEP/SSE, 2014 ==<br />
<br />
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]<br />
<br />
== '''[[Reservoir_Heads|Heated Reservoir Printing]]''' ==<br />
<br />
Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).<br />
<br />
== [[Reservoir_Heads|DPE, HME 2024]] ==<br />
<br />
* [ Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2023]] ==<br />
<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0939641123003119 Combination Techniques Towards Novel Drug Delivery Systems Manufacturing: 3D PCL Scaffolds Enriched With Tetracycline-loaded PVP Nanoparticles] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202307297 Fully Recyclable Cured Polymers for Sustainable 3D Printing] by a team from the [https://www.shenkar.ac.il/en/departments/engineering-plastics-department Department of Polymer Materials Engineering, Pernick Faculty of Engineering, Shenkar College, Israel] and the [https://nano.huji.ac.il/ Institute of Chemistry and Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem]<br />
* [https://www.mdpi.com/2310-2861/9/9/766/pdf Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties] by a team from [https://www.ualberta.ca/agricultural-food-nutritional-science/index.html Department of Agricultural, Food and Nutritional Science, University of Alberta,], [https://quimica.uchile.cl/departamentos/ciencias-de-los-alimentos-y-tecnologia-quimica/presentacion Department of Food Science and Chemical Technology, Universidad de Chile,], and the Department of Food Engineering and the Department of Basic Sciences, [https://www.ubiobio.cl/w/ Universidad del Bío-Bío, Chile]<br />
* [https://openaccess.marmara.edu.tr/entities/publication/d598e954-c38a-4ec5-ad40-a0f941710dc1 Production of Essential Oil Coated Polycapralactone Scaffold With Antibacterial Properties ] by an author from [https://www.marmara.edu.tr/en Marmara University, Istanbul]<br />
* [https://arxiv.org/pdf/2309.01088.pdf Geometry, Mechanics and Actuation of Intrinsically Curved Folds] by a team from [http://www.eng.cam.ac.uk/ Department of Engineering, University of Cambridge, Cambridge, UK]<br />
* [https://www.degruyter.com/document/doi/10.1515/polyeng-2023-0071/html Fabrication of Avian Eggshell Membrane Derived Dispersed Collagen Hydrogels for Potential Bone Regeneration] by a team from [https://home.iitd.ac.in/ Indian Institute of Technology, Delhi]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.202300144 Toward Fully Printed Soft Actuators: UV-Assisted Printing of Liquid Crystal Elastomers and Biphasic Liquid Metal Conductors] by a team from the [https://www.uc.pt/en/fctuc/deec/Department Institute of Systems and Robotics Department of Electrical and Computer Engineering University of Coimbra]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0266353823000489#preview-section-snippets Controlled Directionality in 3D Printing of Graphite-Reinforced Polymer Composite with Enhanced Mechanical Properties] by a team from the [https://www.iitsystem.ac.in/ Indian Institute of Technology]'s [http://www.iitkgp.ac.in/ Kharagpur] and [https://iitgn.ac.in/ Gandhinagar] campuses, and the [https://www.innovationpark.psu.edu/park-news/latest-news/569-join-us-for-the-carbon-science-centre-of-excellence Carbon Science Centre of Excellence, Morgan Advanced Materials, Penn State University]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.langmuir.2c02936 3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating] by a team from the [https://textile.iitd.ac.in/ Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi]<br />
* [https://aip.scitation.org/doi/full/10.1063/5.0133995 Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?] by a team from the [https://www.cee.ucr.edu/ Department of Chemical and Environmental Engineering, University of California, Riverside] and the [https://me.stanford.edu/ Department of Mechanical Engineering, Stanford University]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2022]] ==<br />
<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.2c14815 3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials] by a team from [https://www.cmu.edu/ Carnegie Mellon University]'s [https://www.meche.engineering.cmu.edu/ Mechanical] and [https://www.cheme.engineering.cmu.edu/ Chemical] Engineering Departments; the [https://www.erg.cuhk.edu.hk/erg/MechanicalAndAutomationEngineering Department of Mechanical and Automation Engineering, Chinese University of Hong Kong], and the [https://me.snu.ac.kr/en Department of Mechanical Engineering, Seoul National University]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202200280 Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers] by a team from [https://www.tue.nl/en/ Eindhoven University of Technology]'s [https://www.tue.nl/en/research/institutes/institute-for-complex-molecular-systems/ Institute for Complex Molecular Systems] and [https://www.tue.nl/en/our-university/departments/chemical-engineering-and-chemistry/the-department/ Department of Chemical Engineering and Chemistry], the [https://inma.unizar-csic.es/en/home/ Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza], the [https://www.ciber-bbn.es/en CIBER in Bioengineering, Biomaterials and Nanomedicine], and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]<br />
* [https://asmedigitalcollection.asme.org/SMASIS/proceedings-abstract/SMASIS2022/86274/V001T05A006/1150813 Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring], by a team from [https://erau.edu/ Embry-Riddle Aeronautical University]<br />
* [https://digitalcommons.library.umaine.edu/cgi/viewcontent.cgi?article=4693&context=etd Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers], submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering<br />
* [https://www.chinesechemsoc.org/doi/pdf/10.31635/ccschem.022.202202362 A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization] by a team from [https://www.ornl.gov Oak Ridge National Laboratory]'s [https://www.ornl.gov/division/csd Chemical Services Division] and [https://www.ornl.gov/facility/cnms Center for Nanophase Materials Sciences]; [https://utk.edu/ University of Tennessee, Knoxville]'s [https://chem.utk.edu/ Department of Chemistry] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering]; and [https://jiaowuchu.buct.edu.cn/en_jwc/mainm.htm Beijing University of Chemical Technology]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.2c00933 Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability] by a team from [https://www.ornl.gov/division/csd Chemical Sciences Division, Oak Ridge National Laboratory], [https://www.ornl.gov/division/buildings-and-transportation-science Building and Transportation Sciences Division, Oak Ridge National Laboratory], and the [https://chem.utk.edu/ Department of Chemistry, University of Tennessee, Knoxville]<br />
* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/62f67a4342ddf53f75b8d40c/original/continuous-non-destructive-detection-of-microorganism-growth-at-buried-interfaces-with-vascularized-polymers.pdf Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers] by a team from the [https://gsbse.umaine.edu/ Biomedical Science and Engineering, University of Maine], the [https://mems.duke.edu/ Department of Mechanical Engineering and Material Science, Duke University], and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]<br />
* [https://link.springer.com/article/10.1007/s00170-022-09815-8 Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques] by a team from [https://engineering.purdue.edu/Zucrow Purdue University] and [https://nps.edu/web/mae Naval Postgraduate School]<br />
*[https://journals.sagepub.com/doi/abs/10.1177/10996362221118329 Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores] by a team from various engineering departments at [https://tickle.utk.edu/ The University of Tennessee, Knoxville]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0927775722013188#! Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management] by a team from the [https://textile.iitd.ac.in/ Department of Textile Technology, Indian Institute of Technology - Delhi]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4536&context=open_etd Material Synthesis and Machine Learning for Additive ManufacturingManufacturing], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://scholarworks.utep.edu/cgi/viewcontent.cgi?article=4473&context=open_etd Material Synthesis and Additive Manufacturing of Ceramics], a Master's Thesis submitted to [https://www.utep.edu/engineering/mechanical/index.html the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso]<br />
* [https://pure.tue.nl/ws/portalfiles/portal/197812781/20220330_Sol_hf.pdf Cholesteric Liquid Crystals in Additive Manufacturing], a doctoral dissertation submitted to the [https://www.tue.nl/en/research/research-groups/stimuli-responsive-functional-materials-devices/ Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)]<br />
* [https://www.researchgate.net/publication/359651878_Development_of_Advanced_3D-Printed_Solid_Dosage_Pediatric_Formulations_for_HIV_Treatment Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment] by a team from [https://www.tcd.ie/ Trinity College Dublin], [https://www.ucm.es/english Complutense University of Madrid], and [https://www.kau.edu.sa/home_english.aspx King Abdulaziz University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/jbm.a.37363 An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration], by a team from [https://www.tamiu.edu/ Texas A&M International University], [https://iums.ac.ir/en Iran University of Medical Sciences], and the [https://ut.ac.ir/en University of Tehran]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2021]] ==<br />
<br />
*[https://www.pharmaexcipients.com/wp-content/uploads/2021/11/Effects-of-crosslinking-on-the-physical-solid-state-and-dissolution-properties-of-3D-printed-theophylline-tablets.pdf Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy] and the [https://www.biomeditsiin.ut.ee/en Institute of Biomedicine and Translational Medicine] of the [https://www.ut.ee/en University of Tartu] and from the [https://researchportal.helsinki.fi/en/organisations/division-of-pharmaceutical-chemistry-and-technology Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki]<br />
*[https://www.researchgate.net/profile/Dolores-Serrano/publication/354921250_Understanding_Direct_Powder_Extrusion_for_Fabrication_of_3D_Printed_Personalised_Medicines_A_Case_Study_for_Nifedipine_Minitablets/links/615436b22b34872782f8c993/Understanding-Direct-Powder-Extrusion-for-Fabrication-of-3D-Printed-Personalised-Medicines-A-Case-Study-for-Nifedipine-Minitablets.pdf Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets], a study by a team from the [https://www.ucm.es/pharmacy/welcome Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,]and the [https://www.port.ac.uk/about-us/structure-and-governance/organisational-structure/our-academic-structure/faculty-of-science-and-health/school-of-pharmacy-and-biomedical-sciences Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth]<br />
*[https://dr.ntu.edu.sg/bitstream/10356/152117/3/Science%20Journals%20%E2%80%94%20AAAS.pdf Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables] by a team primarily from [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
*[https://www.proquest.com/openview/c0ab8d5f14ed448695515d5418472170/1?pq-origsite=gscholar&cbl=18750&diss=y Fabrication and Testing of Advanced Composites for Extreme Environments], a Master's dissertation submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.202100477 Wound Healing: From Passive to Smart Dressings] by a team from [https://aut.ac.ir/content/189/Biomedical-Engineering Department of Biomedical Engineering, Amirkabir University of Technology, Tehra] and [https://di.uq.edu.au/ UQ Diamantina Institute, Translational Research Institute, The University of Queensland]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100277 3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview] by a tea, from [https://www.eskisehir.edu.tr/en Eskişehir Technical University, Turkey]<br />
* [https://lup.lub.lu.se/luur/download?func=downloadFile&recordOId=9053163&fileOId=9053168 3D Printing Compositesfrom Raw Materials], a Master Thesis submitted to [https://www.lunduniversity.lu.se/home Lund University]<br />
* [https://arxiv.org/ftp/arxiv/papers/2106/2106.02165.pdf Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers] by a team from [https://engineering.ucdenver.edu/departments/mechanical-engineering the Department of Mechanical Engineering, University of Colorado, Denver], [https://eps.leeds.ac.uk/physics School of Physics and Astronomy, University of Leeds], [https://www.sandia.gov Materials and Failure Modeling Department, Sandia National Laboratories], and [https://www.impressio.tech Impressio, Inc.]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acs.biomac.1c00105 3D-Printed Enzyme-Embedded Plastics] by a team from [https://www.scionresearch.com/ Scion], a Crown Research Institute in New Zealand<br />
<br />
== [[Reservoir_Heads|DPE, HME 2020]] ==<br />
<br />
* [https://ir.lib.uwo.ca/cgi/viewcontent.cgi?article=10152&context=etd Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development], a thesis for a PhD in Mechanical and Materials Engineering submitted to [https://www.eng.uwo.ca/mechanical/graduate/ The University of Western Ontario]<br />
* [https://www.youtube.com/watch?v=dKa1PfS6HrU Toward Multifunctional Liquid Metal Composites], a video by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]<br />
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720302190#! Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals] by a team from [https://www.uclan.ac.uk/schools/pharmacy-biomedical-sciences/index.php School of Pharmacy and Biomedical Sciences, University of Central Lancashire]<br />
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]<br />
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2019]] ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]<br />
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]<br />
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].<br />
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]<br />
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]<br />
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.<br />
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]<br />
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2018]] ==<br />
<br />
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany<br />
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]<br />
<br />
== [[Reservoir_Heads|DPE, HME 2017]] ==<br />
<br />
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]<br />
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]<br />
<br />
== '''[[Filament_Heads|Filament Printing]]''' ==<br />
<br />
Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).<br />
<br />
== FDM/HFF, 2024 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202301711 Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics] by a team from the [https://lassonde.yorku.ca/eecs/ Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto]<br />
<br />
== FDM/HFF, 2023 ==<br />
<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly Loaded Carbon Fiber Filaments for 3d-printed Composites] by a team from the [https://www.uga.edu/ University of Georgia] and [https://www.asu.edu/ Arizona State University ]<br />
* [https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/pol.20230632 Highly loaded carbon fiber filaments for 3D-printed composites] by a team from the [https://www.engineering.uga.edu/schools/ecam/undergraduate School of Environmental, Civil, Agricultural, and Mechanical Engineering (ECAM), College of Engineering, University of Georgia] and the [https://msn.engineering.asu.edu/ Manufacturing Engineering, School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering, Arizona State University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S235243162300158X 3D Printable Spatial Fractal Structures Undergoing Auxetic Elasticity] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology], [https://www.ntu.edu.sg/ Nanyang Technological University], [https://www.cityu.edu.hk/ City University of Hong Kong], and [https://www.northumbria.ac.uk/ Northumbria University]<br />
* [https://pubs.aip.org/aip/jap/article-abstract/134/19/194105/2922082/The-effect-of-porosity-on-flexoelectricity-in-3D The Effect of Porosity on Flexoelectricity in 3d Printed Aluminum/polyvinylidene Fluoride Composite] by a team from [https://www.purdue.edu/ Purdue University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214785323047715 Effect of Input Variables on the Mechanical Properties of Additively Manufactured PEEK Thermoplastics] by a team from [https://www.etsmtl.ca/en/ets/governance/deans-and-departments/mechanical-engineering-department Department of Mechanical Engineering, École de Technologie Supérieure, Montréal], [https://ica.cnrs.fr/the-institute/ Institut Clément Ader, UMR CNRS 5312, University of Toulouse], and [https://oraprdnt.uqtr.uquebec.ca/pls/public/gscw031?owa_no_site=4724 Department of Mechanical Engineering, Innovations Institute in Ecomaterials, Ecoproducts and Ecoenergy (I2E3), Université du Québec à Trois-Rivières]<br />
* [https://ieeexplore.ieee.org/abstract/document/10236995 A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms] by a team from [https://jwc.shmtu.edu.cn/en/8563/list.htm College of Logistics Engineering, Shanghai Maritime University, Shanghai, China] and [http://sklofp.zju.edu.cn/sklen/ College of Mechanical Engineering, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/115657/Chung_J_D_2023.pdf?sequence=1&isAllowed=y Process Monitoring and Control of Advanced Manufacturing based on Physics-Assisted Machine Learning], a dissertation submitted to the [https://www.ise.vt.edu/ Industrial and Systems Engineering department of Virginia Tech]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/acdcd7/meta Multimodal Origami Shape Memory Metamaterials Undergoing Compression-twist Coupling] by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University], and [https://www.northumbria.ac.uk/ Northumbria University, UK]<br />
* [https://link.springer.com/article/10.1007/s10845-023-02141-0 Process Parameter Optimization for Reproducible Fabrication of Layer Porosity Quality of 3D-Printed Tissue Scaffold] by a team from several departments at [https://www.vt.edu/ Virginia Tech]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.3c01307 Fundamentals of Crystalline Evolution and Properties of Carbon Nanotube-Reinforced Polyether Ether Ketone Nanocomposites in Fused Filament Fabrication] by a team from several departments at [https://www.tamu.edu Texas A&M University]<br />
* [https://www.osti.gov/servlets/purl/1960414 Printed Planar Microwave Connector with Multiple Signal Lines] by a team from [https://www.uml.edu/engineering/electrical-computer/ Electrical & Computer Engineering, University of Massachusetts, Lowell]<br />
* [https://www.researchgate.net/profile/Aljawharah-Alsharif/publication/364062631_Structured_3D_Printed_Dry_ECG_Electrodes_Using_Copper_Based_Filament/links/640f739166f8522c38a04270/Structured-3D-Printed-Dry-ECG-Electrodes-Using-Copper-Based-Filament.pdf Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament] by a team from the [https://cemse.kaust.edu.sa/org/cemse Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST)]<br />
* [https://onlinelibrary.wiley.com/doi/full/10.1002/admt.202201677 3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review] by a team from [https://www.kaust.edu.sa/en King Abdullah University of Science and Technology (KAUST)]<br />
<br />
== FDM/HFF, 2022 ==<br />
<br />
* [https://www.tandfonline.com/doi/abs/10.1080/2374068X.2023.2226919 A Comparison Between Large-format 3d Printing and Conventional Fused Filament Fabrication] by a team from [https://issuu.com/uaomercadeo/docs/international_brochure Universidad Autónoma de Occidente, Columbia]<br />
* [https://arxiv.org/pdf/2210.17274.pdf Imbalanced Data Classification via Generative Adversarial Network with Application to Anomaly Detection in Additive Manufacturing Process] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://arxiv.org/ftp/arxiv/papers/2210/2210.17272.pdf Reinforcement Learning-based Defect Mitigation for Quality Assurance of Additive Manufacturing] by a team from the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering, Virginia Tech] and the [https://mie.njit.edu/ Department of Mechanical and Industrial Engineering, New Jersey Institute of Technology]<br />
* [https://books.google.com/books?hl=en&lr=lang_en&id=5XeGEAAAQBAJ&oi=fnd&pg=PA225&dq=hyrel&ots=z5RCHfPoi-&sig=QZbo_KqifYORnJ4Ujgr6rZ3GSc4#v=onepage&q&f=false Fabrication of Polycarbonate Filaments Infused with Carbon from Coconut Shell Powder for 3D Printing Applications] by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Tuskegee University's Department of Materials Science and Engineering (MSE)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/111434/Law_A_D_2022.pdf?sequence=1 Smart Quality Assurance System for Additive Manufacturing using Data-driven based Parameter-Signature-Quality Framework], a dissertation submitted to [https://vt.edu/academics/majors/industrial-and-systems-engineering.html Virginia Tech's Industrial and Systems Engineering department]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac775e/meta Tunable Hyperbolic Out-Of-Plane Deformation of 3D-Printed Auxetic PLA Shape Memory Arrays] by a team from [http://en.hit.edu.cn/ the Harbin Institute of Technology, China] and [https://www.ntu.edu.sg/ Nanyang Technological University, Singapore]<br />
* [https://www.science.org/doi/full/10.1126/sciadv.abn6006 Closed-loop Additive Manufacturing of Upcycled Commodity Plastic through Dynamic Cross-linking] by a team from the [https://www.ornl.gov/division/csd Chemical Sciences Division] and [https://www.ornl.gov/division/mstd Materials Sciences and Technology Division] of [https://www.ornl.gov/ Oak Ridge National Laboratory] and the [https://bredesencenter.utk.edu/ Bredesen Center for Interdisciplinary Research and Graduate Education, University of Tennessee, Knoxville]<br />
* [https://www.researchgate.net/publication/357135453_Effective_reinforcement_of_engineered_sustainable_biochar_carbon_for_3D_printed_polypropylene_biocomposites Effective Reinforcement of Engineered Sustainable Biochar carbon for 3D Printed Polypropylene Biocomposites] by a team from [https://www.tuskegee.edu Tuskegee Univeristy]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2214860422001695 Nonparametric Bayesian Framework for Material and Process Optimization with Nanocomposite Fused Filament Fabrication] by a team from the departments of [https://www.eng.auburn.edu/insy/ Industrial and Systems Engineering] and [https://www.eng.auburn.edu/chen/ Chemical Engineering] of [https://auburn.edu/ Auburn University]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0378517322002174 Paliperidone Palmitate as Model of Heat-Sensitive Drug for Long-Acting 3D Printing Application] by a team from the [https://cvchercheurs.ulb.ac.be/Site/unite/ULB396UK.php Laboratory of Pharmaceutics and Biopharmaceutics] and the [https://dynamics.ulb.be/ Laboratory of Polymer and Soft Matter Dynamics] of the [https://www.ulb.be/en/ulb-homepage Université libre de Bruxelles] and the [https://www.smpc.be/ Laboratory of Polymeric and Composite Materials (LPCM), Center of Innovation and Research in Materials and Polymers (CIRMAP), University of Mons]<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S2589152920301496 Effect of infill on resulting mechanical properties of additive manufactured bioresorbable polymers for medical devices] by a team from [https://www.poly-med.com/ Poly-Med, Inc.] and [https://www.clemson.edu/ Clemson University]<br />
* [http://www.ijmerr.com/uploadfile/2022/0105/20220105041437730.pdf Surface Design of 3D-printed PEEK by Controlling Slicing Parameters] in the [http://www.ijmerr.com/ International Journal of Mechanical Engineering and Robotics Research]<br />
<br />
== FDM/HFF, 2021 ==<br />
<br />
* [https://www.sciencedirect.com/science/article/pii/S2666682021001134 Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites] from a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://journals.sagepub.com/doi/abs/10.1177/00219983211044748 Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications] by a team from [https://www.tuskegee.edu/ Tuskegee University]<br />
* [https://iopscience.iop.org/article/10.1088/1361-665X/ac1eac/meta Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances], by a team from [http://en.hit.edu.cn/ Harbin Institute of Technology, China], [https://en.nwpu.edu.cn/ Northwestern Polytechnical University, China], and [https://www.ntu.edu.sg/mae School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore]<br />
* [https://www.proquest.com/openview/57d5f52782d78880b7209659a750c97a/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Functiona Materials for 3D Printed Composites], a Master's thesis submitted to the [https://engineering.tamu.edu/mechanical/index.html Mechanical Engineering Department of Texas A&M University]<br />
* [https://link.springer.com/article/10.1007/s11837-021-04647-5 Novel Architected Material for Cardiac Patches] by a team from the [https://engineering.utsa.edu/mechanical/ Department of Mechanical Engineering, University of Texas at San Antonio]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsanm.1c00365 Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite] by a team from [https://chem.duke.edu/ Department of Chemistry, Duke University] and [https://www.univ-grenoble-alpes.fr/ Université Grenoble Alpes]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/smll.202005743 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure] by a team from Northwestern University's [https://www.tgs.northwestern.edu/admission/academic-programs/explore-programs/materials-science-and-engineering.html Department of Materials Science and Engineering] and [https://sqi.northwestern.edu/ Simpson Querrey Institute] and the Soft Materials Branch of the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate, Air Force Research Laboratory]<br />
<br />
== FDM/HFF, 2020 ==<br />
<br />
* [https://smartech.gatech.edu/bitstream/handle/1853/64192/LU-DISSERTATION-2020.pdf Physics Based Compressive Sensing for Additive Manufacturing Process Monitoring] a PhD dissertation presented to the [https://www.me.gatech.edu/ Mechanical Engineering School at Georgia Tech].<br />
* [https://www.sciencedirect.com/science/article/abs/pii/S0928098720304073 Preparation and Characterization of Hot-Melt Extruded Polycaprolactone-Based Filaments Intended for 3D-Printing of Tablets] by a team from the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy], [https://www.biomeditsiin.ut.ee/en/research-groups/immunology Department of Immunology], and the [https://www.omi.ut.ee/en Department of Geology] of the University of Tartu, Estonia, and the [https://www.uef.fi/en/unit/school-of-pharmacy School of Pharmacy] of the University of Eastern Finland<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202004515 Shape Programming by Modulating Actuation over Hierarchical Length Scales] by a team from [https://www.espci.psl.eu/en/ the Higher School of Industrial Physics and Chemistry of the City of Paris\], [https://www.psl.eu/en the Paris Sciences and Letters University], [https://www.sorbonne-universite.fr/ the Sorbonne University], [https://www.sissa.it/ the International School of Advanced Studies (Italy)], and the [https://www.santannapisa.it/en/institute/biorobotics/biorobotics-institute the BioRobotics Institute of the International School of Advanced Studies of the University of Sant'Anna (Italy)]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042031023X Considering Lithium-ion Battery 3D-printing via Thermoplastic Material Extrusion and Polymer Powder Bed Fusion] by a team from [https://www.lrcs.u-picardie.fr/en/ Laboratoire de Réactivité et de Chimie des Solides, Université de Picardie Jules Verne], [http://lti-picardie.fr/ Laboratoire des Technologies Innovantes, Université de Picardie Jules Verne], [https://www.energie-rs2e.com/fr/page/energie-rs2e-reseau-stockage-electrochimique-lenergie RS2E, Réseau Français sur le Stockage Électrochimique de l’Énergie], [https://www.jyu.fi/science/en/chemistry Department of Chemistry, University of Jyväskylä], [https://catalog.ysu.edu/undergraduate/colleges-programs/college-science-technology-engineering-mathematics/department-electrical-computer-engineering/ Electrical & Computer Engineering, Youngstown State University], [http://www.cue-lillenorddefrance.fr/ Université Lille Nord de France], [http://www.gemtex.fr/ GEMTEX | Textile Research Laboratory], and [https://www.u-picardie.fr/recherche/presentation/plateformes/plateforme-microscopie-electronique-382885.kjsp Plateforme de Microscopie Électronique (PME) de l'Université de Picardie Jules Verne]<br />
<br />
* [https://link.springer.com/protocol/10.1007/978-1-0716-0611-7_7#Sec13 Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering], part of the textbook [https://link.springer.com/book/10.1007/978-1-0716-0611-7 Computer-Aided Tissue Engineering - Methods and Protocols] by a team from [https://www.maastrichtuniversity.nl/ Maastricht University's] [https://www.maastrichtuniversity.nl/research/institute-technology-inspired-regenerative-medicine Institute for Technology-Inspired Regenerative Medicine] and [https://www.maastrichtuniversity.nl/research/aachen-maastricht-institute-biobased-materials Aachen-Maastricht Institute for Biobased Materials]<br />
* [https://www.mdpi.com/2073-4360/12/8/1665/pdf Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]<br />
* [https://red.library.usd.edu/cgi/viewcontent.cgi?article=1090&context=honors-thesis Current and Future Applications of 3D Printing Using Custom-Made Materials Made Materials] an honors thesis paper from the [https://www.usd.edu/arts-and-sciences/chemistry Chemistry Department of the University of South Dakota]<br />
* [https://www.sciencedirect.com/science/article/pii/S221486042030590X Current Understanding and Challenges in High-Temperature Additive Manufacturing of Engineering Thermoplastic Polymers] by a team from the [https://mii.vt.edu/About.html Macromolecules Innovation Institute at Virginia Tech]<br />
* [https://link.springer.com/chapter/10.1007/978-3-030-45385-5_16 Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application] by a multi-disciplinary, multi-university team from Istanbul, Turkey<br />
* [https://pubs.acs.org/doi/pdf/10.1021/acsami.0c05196 A poly(lactic acid)-based Ink for Biodegradable Printed Electronics with Conductivity Enhanced through Solvent Aging] by the [https://www.colorado.edu/mse/ Materials Science & Engineering Program of the Univeristy of Colorado, Boulder]<br />
* [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375/0000/Advanced-3D-printed-EAP-actuator-applied-to-high-precision-large/10.1117/12.2556532.short?SSO=1&tab=ArticleLink Advanced 3D-Printed ElectroActive Polymer (EAP) Actuator Applied to High Precision Large Optical-Quality Surface Fabrication: First Results], a presentation in [https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11375.toc Proceedings Volume 11375 of Electroactive Polymer Actuators and Devices (EAPAD) XXII]<br />
* [https://openscholarship.wustl.edu/cgi/viewcontent.cgi?article=1573&context=eng_etds Exploring Attacks and Defenses in Additive Manufacturing Processes: Implications in Cyber-Physical Security], a Master of Science thesis paper presented to [https://engineering.wustl.edu/Pages/home.aspx the McKelvey School of Engineering at Washington University in St. Louis]<br />
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a team from [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]<br />
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from [https://www.rmit.edu.au/research/centres-collaborations/centre-for-additive-manufacturing Centre for Additive Manufacturing, School of Engineering, Royal Melbourne Institute of Technology University] and [https://www.engr.utexas.edu/academics/mechanical-engineering Department of Mechanical Engineering, The University of Texas at Austin]<br />
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Engineering Department of Tuskegee University]<br />
<br />
== FDM/HFF, 2019 ==<br />
<br />
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]<br />
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]<br />
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science<br />
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].<br />
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]<br />
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]<br />
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]<br />
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]<br />
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University] <br />
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]<br />
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]<br />
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's (SUTD)] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]<br />
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]<br />
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]<br />
<br />
== FDM/HFF, 2018 ==<br />
<br />
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]<br />
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]<br />
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]<br />
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]<br />
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]<br />
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]<br />
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory] <br />
* [https://www.sciencedirect.com/science/article/pii/S0378517318302035 Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule] by a team from [http://merck.com Merck Pharmaceuticals]<br />
* [https://www.sciencedirect.com/science/article/pii/S0266353817318365 Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling] by the [https://www.wpi.edu/academics/departments/mechanical-engineering Mechanical Engineering Staff] at [https://www.wpi.edu/ Worcester Polytechnic Institute]<br />
<br />
== FDM/HFF, 2017 ==<br />
<br />
*[http://hyrel3d.net/papers/3D_Printing_of_the_Flight_Model.pdf NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program] by a team from the [http://site.ufsm.br Federal University of Santa Maria (UFSM), Brasil].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/TensileMechanicalPropertiesofPolypropyleneCom.pdf Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Manuscripts/EffectofProcessParametersandShotPeeningonM.pdf Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF)], a reviewed paper of the [http://sffsymposium.engr.utexas.edu/sites/default/files/2017/Welcome.pdf Solid Freeform Fabrication Symposium 2017].<br />
* [http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2665941 Hybrid Processes in Additive Manufacturing] in the [http://manufacturingscience.asmedigitalcollection.asme.org/journal.aspx Journal of Manufacturing Science and Engineering] of the [https://www.asme.org/ American Society of Mechanical Engineers]<br />
* [https://link.springer.com/article/10.1007/s00170-017-1340-8 Effects of Material Properties on Warpage in Fused Deposition Modeling Parts] in [https://link.springer.com/journal/170 The International Journal of Advanced Manufacturing Technology]<br />
* [https://link.springer.com/article/10.1007/s10443-017-9661-1 Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites], in [https://link.springer.com/journal/10443 Applied Composite Materials]<br />
*[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5331332/ Dynamical Majorana edge modes in a broad class of topological mechanical systems] by [http://www.njit.edu The New Jersey Institute of Technology]<br />
<br />
== FDM/HFF, 2016 ==<br />
<br />
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware] published by [https://www.nasa.gov NASA]</div>Davo