30M

From Hyrel3D
Revision as of 22:31, 3 February 2021 by Davo (talk | contribs) (Spine Board)
Jump to: navigation, search

The System 30M v2 is our leading enclosed, benchtop model.

S30M.jpg

Technical Data

Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the Printer Overview page.

History

  • The System was introduced during our 2012 Kickstarter campaign, and came with a 23" tall enclosure.
  • The System 30 was an improvement made while fulfilling our Kickstarter obligations, and came with a larger (30" tall) enclosure.
  • The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door.
  • The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation. CE marked units are available upon request.

Internals

Here is an explanation of the internal electronics of the 30M; click any images for larger versions:

Tablet Interface Board

Tablet Interface Board (with STM407 Motion Controller) has Internal and External Ports.

The current board, circa 2021.

600px

Spine Board

The Spine Board has Axis Control Internal and External Ports.

The new board, circa 2021.

Spine 2021.jpg

The original board, most recent revision.

Spine orig.jpg