Difference between revisions of "Emulsifiables"

From Hyrel3D
Jump to: navigation, search
Line 60: Line 60:
 
| 8.750|| 1.000 || 2000|| 120 || 1600|| 110
 
| 8.750|| 1.000 || 2000|| 120 || 1600|| 110
 
|}
 
|}
 +
 +
As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828.

Revision as of 18:07, 19 November 2015

EMO-Type heads are for printing as follows:

  • With pastes, gels, emulsifiables or waxes.
  • At room or elevated temperatures.
  • With or without UV Crosslining.
  • With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.

These include the following:

EMO-Type Head Comparison
Model EMO-25 COD-25 VOL-25 VCD-25 KRA-15 KCD-15
Max Temp Ambient Ambient 100°C 100°C 150°C 150°C
UV Crosslinking no yes no yes no yes

Settings for these heads (based on planetary gear ratios) are as follows; you will need to adjust these for the qualities of your print media:

EMO-Type Head Settings
Gear
Reduction
Overrides Prime Unprime
Pulses FR% Steps Dwell Steps Dwell
19:1 1.600 1.000 500 100 400 100
27:1 2.300 1.000 700 100 550 100
51:1 4.700 1.000 900 110 750 105
100:1 8.750 1.000 2000 120 1600 110

As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828.