Materials

From Hyrel3D
Revision as of 22:52, 1 February 2018 by Davo (talk | contribs) (Materials Printable on Hyrel Machines)
Jump to: navigation, search


A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material Extruder Head (°C) Fan %* HotBed (°C) v2.x mm/min v3/4.x mm/min
ABS MK1-250 240/235 10 (25) 80 2000 4000
PLA MK1-250 185/180 10 (25) 40 2000 4000
PlastInk Rubber MK1-250 225 10 (25) 50 2000 4000
NinjaFlex MK1-250 225 20 (51) 40 500 500
Nylon MK1-250 225 10 (25) 80 2000 4000
T-Glase MK1-250 225 10 (25) 80 2000 4000
BendLay MK1-250 225 10 (25) 50 500 500
LayBrick MK1-250 225 10 (25) 80 500 500
LayWoo-d3 MK1-250 220/205 10 (25) 80 2000 4000
PET MK1-250 210 10 (25) 40 500 500
PVA MK1-250 210 10 (25) 40 500 500
Clay EMO-25 n/a n/a n/a 20 20
Metal Clay,
Precious Metal Clay
EMO-25 n/a n/a n/a 20 20
Polypropylene MK1-250 235 10 (25) 80 2000 4000
Polycarbonate MK1-350 350 10 (25) 80 2000 4000
Porcelain EMO-25 n/a n/a n/a 20 20
Plasticine EMO-25 n/a n/a n/a 500 500
Play-Doh EMO-25 n/a n/a n/a 250 250
Sculpey EMO-25 n/a n/a n/a 250 250
Sugru EMO-25 n/a n/a n/a 250 250
RTV Silicone EMO-25 n/a n/a n/a 250 250
Flex45 MK2-250 215 20 (51) 40 800 800
HIPS MK1-250 temp fan bed v2 v4
Moldlay MK2-250 temp fan bed v2 v4
PETG MK1-250 temp fan bed v2 v4
PEG KRA-15 temp fan bed v2 v4
PEEK MK1-450 temp fan bed v2 v4
Wax (molten) KRA-15 temp fan bed v2 v4
Wax (filament) MK1-250 temp fan bed v2 v4
PCL KRA-15 temp fan bed v2 v4
PPSU MK1-450 temp fan bed v2 v4
  • Note: Be sure the fan directs air to the material and not directly at the nozzle.
  • Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.