Difference between revisions of "Reservoir Heads"
(→Materials for Reservoir Heads) |
|||
(39 intermediate revisions by 2 users not shown) | |||
Line 9: | Line 9: | ||
== Nordson and ViscoTec Heads == | == Nordson and ViscoTec Heads == | ||
− | Some customers have requested that we configure our equipment in such a way that heads from other companies like the [https://www.nordson.com/en/divisions/efd/products/fluid-dispensing-systems/ultimus-v-high-precision-dispenser '''Nordson Ultimus V heads'''] or one of the [https://www.viscotec.de/en/products/3d-print-heads/ '''Viscotec Vipro heads''']. Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all. | + | [[File:Nordson_viscotec_vipro_medium.jpg|left|200px|caption]] Some customers have requested that we configure our equipment in such a way that heads from other companies like the [https://www.nordson.com/en/divisions/efd/products/fluid-dispensing-systems/ultimus-v-high-precision-dispenser '''Nordson Ultimus V heads'''] or one of the [https://www.viscotec.de/en/products/3d-print-heads/ '''Viscotec Vipro heads''']. |
+ | |||
+ | Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all. | ||
+ | |||
+ | Click image for a larger image. | ||
==Materials for Reservoir Heads== | ==Materials for Reservoir Heads== | ||
Line 18: | Line 22: | ||
* At room or elevated temperatures. | * At room or elevated temperatures. | ||
* With or without UV Crosslining. | * With or without UV Crosslining. | ||
− | * With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips. | + | * With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips '''OF ANY SIZE'''. |
The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips. | The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips. | ||
Line 62: | Line 66: | ||
<gallery> | <gallery> | ||
File:EMO-25.png|[[EMO]]-25 | File:EMO-25.png|[[EMO]]-25 | ||
− | File:COD-25.png|[[ | + | File:COD-25.png|[[EMO]]-25 with UV array |
File:SDS-30.png|[[SDS]]-5, [[SDS]]-10,<br>[[SDS]]-30, [[SDS]]-60 | File:SDS-30.png|[[SDS]]-5, [[SDS]]-10,<br>[[SDS]]-30, [[SDS]]-60 | ||
− | File:CSD-60.png|[[ | + | File:CSD-60.png|[[SDS]]-5, [[SDS]]-10,<br>[[SDS]]-30, [[SDS]]-60 with UV array |
− | SMH-2 Static Mixing Head | + | File:SMH2.jpg | [[SMH]]-2 Static Mixing Head |
</gallery> | </gallery> | ||
Line 72: | Line 76: | ||
<gallery> | <gallery> | ||
File:VOL-25.png|[[VOL]]-25 | File:VOL-25.png|[[VOL]]-25 | ||
− | File:VCD-25.png|[[VOL]]-25 with | + | File:VCD-25.png|[[VOL]]-25 with UV array |
File:KRA-15.png|[[KRA]]-15 | File:KRA-15.png|[[KRA]]-15 | ||
− | File:KCD-15.png|[[KRA]]-15 with | + | File:KCD-15.png|[[KRA]]-15 with UV array |
</gallery> | </gallery> | ||
Line 110: | Line 114: | ||
:[[VOL]]: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity | :[[VOL]]: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity | ||
:[[KR2]]: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity | :[[KR2]]: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity | ||
− | :[[TAM]]: Tambora: Heated (up to | + | :[[TAM]]: Tambora: Heated (up to 270°C) Emulsifiables - High Viscosity |
:[[SDS]]: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity | :[[SDS]]: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity | ||
:[[HSD]]: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity | :[[HSD]]: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity | ||
Line 124: | Line 128: | ||
Firmware information is listed [[Firmware|on our Firmware page]]. | Firmware information is listed [[Firmware|on our Firmware page]]. | ||
+ | |||
+ | == Reservoirs for Reservoir Heads == | ||
+ | |||
+ | We've used different reservoirs over the years. Here are the details. | ||
+ | |||
+ | === Metal Reservoirs === | ||
+ | |||
+ | {| border="1" class="wikitable" style="text-align: center; width: 80%;" | ||
+ | |+ Metal Reservoirs | ||
+ | ! style="width: 10%;" | Tube Material | ||
+ | ! style="width: 10%;" | Plunger <br> O-Rings | ||
+ | ! style="width: 10%;" | Nominal <br> Volume | ||
+ | ! style="width: 10%;" | ID <br> mm | ||
+ | ! style="width: 10%;" | OD <br> mm | ||
+ | ! style="width: 10%;" | Default <br> Heads | ||
+ | ! style="width: 10%;" | Also <br> Compatible | ||
+ | ! style="width: 20%;" | Notes | ||
+ | |- | ||
+ | | Aluminum || 1 || 25 cc || 16.9 mm || 20.2 mm || EMO, VOL || EMO-XT || Modified "Makin" | ||
+ | |- | ||
+ | | Stainless || 1 || 15 cc || 17.7 mm || 20 mm || KRA* || none || Modified "Makin" | ||
+ | |- | ||
+ | | Stainless || 1 || 25 cc || 17.7 mm || 20 mm || none || EMO, VOL, EMO-XT || Modified "Makin" | ||
+ | |- | ||
+ | | Stainless || 2 || 15 cc || 18 mm || 20 mm || KR2, TAM, EMO-XT || none || Custom | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | === Plastic Reservoirs === | ||
+ | |||
+ | {| border="1" class="wikitable" style="text-align: center; width: 80%;" | ||
+ | |+ Plastic Reservoirs | ||
+ | ! style="width: 20%;" | Default <br> Heads | ||
+ | ! style="width: 10%;" | Tube Material | ||
+ | ! style="width: 20%;" | Manufacturer | ||
+ | ! style="width: 10%;" | Part <br> Number | ||
+ | ! style="width: 10%;" | Nominal <br> Volume | ||
+ | ! style="width: 10%;" | Notes | ||
+ | ! style="width: 20%;" | Hyrel Part | ||
+ | ! style="width: 10%;" | Quantity | ||
+ | |- | ||
+ | | SDS-1 || Polypropylene || MHC Easy-Touch || 802010 || 1 cc || none || AN.SYR-01/100-MHC || 100 | ||
+ | |- | ||
+ | | SDS-5 || Polypropylene || BD || 309646 || 5 cc || none || AN.SYR-05/125-BD || 125 | ||
+ | |- | ||
+ | | SDS-10 || Polypropylene || BD || 309604 || 10 cc || none || AN.SYR-10/100-BD || 100 | ||
+ | |- | ||
+ | | SDS-30<br>SDS-30XT || Polypropylene || BD || 302832 || 30 cc || none || AN.SYR-30/54-BD || 54 | ||
+ | |- | ||
+ | | SDS-60<br>SDS-60XT || Polypropylene || BD || 309653 || 60 cc || none || AN.SYR-60/40-BD|| 40 | ||
+ | |- | ||
+ | | SDS-150XT || Polypropylene || - || - || 150 cc || none || AN.SYR-150/10|| 10 | ||
+ | |- | ||
+ | | HSD-10 || Polyamide || Ardes* || || 10 cc || *modified || AN.SYR-10-Ardes || 1 | ||
+ | |- | ||
+ | |} | ||
== Settings for Reservoir Heads == | == Settings for Reservoir Heads == | ||
Line 141: | Line 201: | ||
! style="width: 10%" | [[VOL]]<br>51:1 Ratio | ! style="width: 10%" | [[VOL]]<br>51:1 Ratio | ||
! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1 | ! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1 | ||
− | ! style="width: 10%" | | + | ! style="width: 10%" | [[KR2]]-ST <br> Super Torque |
− | ! style="width: 10%" | EMO-300XT<br> | + | ! style="width: 10%" | EMO-300XT <br> eXtra Torque |
|- | |- | ||
!colspan="7"| Material | !colspan="7"| Material | ||
Line 160: | Line 220: | ||
| (any) | | (any) | ||
|- | |- | ||
− | ! Nozzle | + | ! Default Nozzle |
| 1.600 | | 1.600 | ||
| 1.600 | | 1.600 | ||
Line 207: | Line 267: | ||
|- | |- | ||
! rowspan="2" | Pulses / µL | ! rowspan="2" | Pulses / µL | ||
− | | '''271''' | + | | '''271.9''' |
| 517 | | 517 | ||
| '''1297''' | | '''1297''' | ||
Line 307: | Line 367: | ||
|- | |- | ||
! RTD Type | ! RTD Type | ||
− | | | + | | 1k_PRTD |
− | | | + | | 1k_PRTD |
− | | | + | | 1k_PRTD |
− | | | + | | 1k_PRTD |
− | | | + | | 1k_PRTD |
|- | |- | ||
! Plot Settings | ! Plot Settings | ||
Line 346: | Line 406: | ||
| 1,500 | | 1,500 | ||
| 1,500 | | 1,500 | ||
− | | | + | | 10,000 |
| ? | | ? | ||
| ? | | ? | ||
Line 354: | Line 414: | ||
! style="width: 10%" | [[VOL]]<br>51:1 Ratio | ! style="width: 10%" | [[VOL]]<br>51:1 Ratio | ||
! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1 | ! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1 | ||
− | ! style="width: 10%" | | + | ! style="width: 10%" | [[KR2]]-ST <br> Super Torque |
− | ! style="width: 10%" | EMO-300XT<br> | + | ! style="width: 10%" | EMO-300XT <br> eXtra Torque |
|- | |- | ||
|} | |} | ||
Line 365: | Line 425: | ||
|- | |- | ||
! style="width: 10%" | Settings | ! style="width: 10%" | Settings | ||
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 1 ET |
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 5 |
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 10 |
− | ! style="width: 15%" | [[SDS]]/[[HSD]]/[[RSD]] | + | ! style="width: 15%" | [[SDS]]/[[HSD]]/[[RSD]] 30 |
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 60 |
|- | |- | ||
!colspan="11"| Material | !colspan="11"| Material | ||
Line 387: | Line 447: | ||
| (any) | | (any) | ||
|- | |- | ||
− | ! Nozzle | + | ! Default Nozzle |
| 1.600 | | 1.600 | ||
| 1.600 | | 1.600 | ||
Line 434: | Line 494: | ||
|- | |- | ||
! rowspan="2" | Pulses / µL | ! rowspan="2" | Pulses / µL | ||
− | | | + | | 270 |
| '''87.3''' | | '''87.3''' | ||
| '''58.7''' | | '''58.7''' | ||
Line 440: | Line 500: | ||
| '''17.4''' | | '''17.4''' | ||
|- | |- | ||
− | | colspan="5" | ''Note: Values above in '''BOLD''' have been validated through multiple sample testing, July 2020.'' | + | | colspan="5" | ''Note: Values above in '''BOLD''' have been validated through multiple sample testing, July 2020 or Oct 2021.'' |
|- | |- | ||
! Multiplier | ! Multiplier | ||
Line 452: | Line 512: | ||
|- | |- | ||
! Steps | ! Steps | ||
− | | | + | | 3000 |
| 1500 | | 1500 | ||
| 3000 | | 3000 | ||
Line 466: | Line 526: | ||
|- | |- | ||
! Dwell Time (ms) | ! Dwell Time (ms) | ||
− | | | + | | 300 |
| 150 | | 150 | ||
| 300 | | 300 | ||
− | | | + | | 225 |
− | | | + | | 150 |
|- | |- | ||
! colspan="11"| Unprime | ! colspan="11"| Unprime | ||
|- | |- | ||
! Steps | ! Steps | ||
− | | | + | | 3000 |
| 1500 | | 1500 | ||
| 3000 | | 3000 | ||
Line 489: | Line 549: | ||
|- | |- | ||
! Dwell Time | ! Dwell Time | ||
− | | - | + | | -300 |
| -150 | | -150 | ||
| -300 | | -300 | ||
Line 528: | Line 588: | ||
|- | |- | ||
! Model | ! Model | ||
− | | SDS | + | | SDS |
| SDS-5 | | SDS-5 | ||
| SDS-10 | | SDS-10 | ||
Line 545: | Line 605: | ||
| None | | None | ||
| None | | None | ||
− | | None / | + | | None / 1k_PRTD / 1k_PRTD |
| None | | None | ||
|- | |- | ||
Line 586: | Line 646: | ||
|- | |- | ||
! style="width: 10%" | Settings | ! style="width: 10%" | Settings | ||
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 1 ET |
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 5 |
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 10 |
− | ! style="width: 15%" | [[SDS]]/[[HSD]]/[[RSD]] | + | ! style="width: 15%" | [[SDS]]/[[HSD]]/[[RSD]] 30 |
− | ! style="width: 10%" | [[SDS]] | + | ! style="width: 10%" | [[SDS]] 60 |
|- | |- | ||
Line 601: | Line 661: | ||
! style="width: 10%" | Settings | ! style="width: 10%" | Settings | ||
! style="width: 10%" | [[HSD-10-Ardes]] | ! style="width: 10%" | [[HSD-10-Ardes]] | ||
− | ! style="width: 10%" | [[SDS | + | ! style="width: 10%" | [[SDS]]-30-XT |
− | ! style="width: 10%" | [[SDS | + | ! style="width: 10%" | [[SDS]]-60-XT |
− | ! style="width: 10%" | | + | ! style="width: 10%" | [[SDS]]-150-XT |
− | ! style="width: 10%" | DSD-50 | + | ! style="width: 10%" | [[DSD-50]] |
|- | |- | ||
!colspan="6"| Material | !colspan="6"| Material | ||
Line 622: | Line 682: | ||
| (any) | | (any) | ||
|- | |- | ||
− | ! Nozzle | + | ! Default Nozzle |
| 1.600 | | 1.600 | ||
| 1.600 | | 1.600 | ||
Line 660: | Line 720: | ||
|- | |- | ||
! Maximum | ! Maximum | ||
− | | | + | | 75 |
| 0 | | 0 | ||
| 0 | | 0 | ||
Line 701: | Line 761: | ||
|- | |- | ||
! Dwell Time (ms) | ! Dwell Time (ms) | ||
− | |||
− | |||
− | |||
− | |||
| 900 | | 900 | ||
+ | | 115 | ||
+ | | 150 | ||
+ | | 150 | ||
+ | | 1 | ||
|- | |- | ||
! colspan="6"| Unprime | ! colspan="6"| Unprime | ||
Line 815: | Line 875: | ||
! style="width: 10%" | Settings | ! style="width: 10%" | Settings | ||
! style="width: 10%" | [[HSD-10-Ardes]] | ! style="width: 10%" | [[HSD-10-Ardes]] | ||
− | ! style="width: 10%" | [[SDS | + | ! style="width: 10%" | [[SDS]]-30-XT |
− | ! style="width: 10%" | [[SDS | + | ! style="width: 10%" | [[SDS]]-60-XT |
− | ! style="width: 10%" | | + | ! style="width: 10%" | [[SDS]]-150-XT |
! style="width: 10%" | DSD-50 | ! style="width: 10%" | DSD-50 | ||
|- | |- | ||
|} | |} |
Revision as of 19:33, 9 March 2023
Reservoir Heads is how we print (also known as Direct Ink Writing or Robocasting) with fluid or emulsified (non-filament-based) materials which are deposited at, above, or below room temperature, with or without UV Crosslinking.
Nordson and ViscoTec Heads
Some customers have requested that we configure our equipment in such a way that heads from other companies like the Nordson Ultimus V heads or one of the Viscotec Vipro heads.Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all.
Click image for a larger image.
Materials for Reservoir Heads
Reservoir Heads heads are for printing as follows:
- With pastes, gels, emulsifiables or waxes.
- At room or elevated temperatures.
- With or without UV Crosslining.
- With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips OF ANY SIZE.
The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips.
- 3P Quick Cure Clay
- Adhesives
- Clay, Generic
- Epoxy, Two-part
- Fimo
- Glue
- Kato
- Metal Clay, including Precious Metal Clay (PMC)
- Modeling Clay
- PEG PolyEthylene Glycol
- Porcelain
- Plasticine
- Play-Doh
- Resins
- RTV Silicone
- Sculpey
- Sugru
The following materials can be printed from Warm Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips, or may print more easily at higher temperatures.
Reservoir Heads
Ambient or sub-ambient deposition is available through the following Reservoir-based heads:
Heated deposition is available through the following Reservoir-based heads:
- Overview of the EMO Heads
- Overview of the SDS Heads
- Overview of the VOL Heads
- Overview of the KRA Heads
- Overview of the SMH-2 Head
- Please see our Manuals as well.
Temperature > | 20°C < Ambient | Ambient | Up to 50°C | Up to 90°C | Up to 180°C | Up to 270°C |
---|---|---|---|---|---|---|
Crosslinking Optional |
RSD-30 | EMO-25 SDS-5, -10, SDS-30, -60 SMH-2 |
HSD-30 | HSD-10 VOL-25 |
KRA-15 KR2-15 |
TAM-15 |
Note, RSD-30 will take you about 20C below ambient.
So, what do these goofy designations actually stand for?
- EMO: Emulsifiables at Room Temperature - Low to Medium Viscosity
- COD: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity
- VOL: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity
- KR2: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity
- TAM: Tambora: Heated (up to 270°C) Emulsifiables - High Viscosity
- SDS: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity
- HSD: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
- RSD: Refrigerated Syringe Dispensing System - Low to Medium Viscosity
- DSD: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity
- SMH: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity
Research Papers Citing Hyrel Reservoir Heads
These are now listed by year here.
Firmware Versions for Reservoir Heads
Firmware information is listed on our Firmware page.
Reservoirs for Reservoir Heads
We've used different reservoirs over the years. Here are the details.
Metal Reservoirs
Tube Material | Plunger O-Rings |
Nominal Volume |
ID mm |
OD mm |
Default Heads |
Also Compatible |
Notes |
---|---|---|---|---|---|---|---|
Aluminum | 1 | 25 cc | 16.9 mm | 20.2 mm | EMO, VOL | EMO-XT | Modified "Makin" |
Stainless | 1 | 15 cc | 17.7 mm | 20 mm | KRA* | none | Modified "Makin" |
Stainless | 1 | 25 cc | 17.7 mm | 20 mm | none | EMO, VOL, EMO-XT | Modified "Makin" |
Stainless | 2 | 15 cc | 18 mm | 20 mm | KR2, TAM, EMO-XT | none | Custom |
Plastic Reservoirs
Default Heads |
Tube Material | Manufacturer | Part Number |
Nominal Volume |
Notes | Hyrel Part | Quantity |
---|---|---|---|---|---|---|---|
SDS-1 | Polypropylene | MHC Easy-Touch | 802010 | 1 cc | none | AN.SYR-01/100-MHC | 100 |
SDS-5 | Polypropylene | BD | 309646 | 5 cc | none | AN.SYR-05/125-BD | 125 |
SDS-10 | Polypropylene | BD | 309604 | 10 cc | none | AN.SYR-10/100-BD | 100 |
SDS-30 SDS-30XT |
Polypropylene | BD | 302832 | 30 cc | none | AN.SYR-30/54-BD | 54 |
SDS-60 SDS-60XT |
Polypropylene | BD | 309653 | 60 cc | none | AN.SYR-60/40-BD | 40 |
SDS-150XT | Polypropylene | - | - | 150 cc | none | AN.SYR-150/10 | 10 |
HSD-10 | Polyamide | Ardes* | 10 cc | *modified | AN.SYR-10-Ardes | 1 |
Settings for Reservoir Heads
All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below.
Older settings are listed here.
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings:
METAL Reservoir Heads
Settings | EMO, VOL 27:1 Ratio |
VOL 51:1 Ratio |
EMO-XT, KR2, TAM 100:1 |
KR2-ST Super Torque |
EMO-300XT eXtra Torque | |
---|---|---|---|---|---|---|
Material | ||||||
Type | Custom | Custom | Custom | Custom | Custom | |
Color | (any) | (any) | (any) | (any) | (any) | |
Default Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 1.600 | |
Layer | (any) | (any) | (any) | (any) | (any) | |
Temp Info | ||||||
Print Temp | 0 | 0, 35 | 35 | (varies) | 0 | |
Power Factor | 100 | 100 | 100 | 100 | 100 | |
Minimum | 0 | 0 | 0 | 0 | 0 | |
Maximum | 0 | 90 | 0 / 180 / 270 | 0 | 0 | |
Overrides | ||||||
Pulses / µL | 271.9 | 517 | 1297 | ? | ? | |
Note: Values above in BOLD have been validated through multiple sample testing, July 2020. | ||||||
Multiplier | 1 | 1 | 1 | ? | ? | |
Prime | ||||||
Steps | 6000 | 1000 | 6000 | ? | ? | |
Rate | 10,000 | 10,000 | 10,000 | ? | ? | |
Dwell Time (ms) | 600 | 100 | 600 | ? | ||
Unprime | ||||||
Steps | 6000 | 1000 | 6000 | ? | ? | |
Rate | 10,000 | 10,000 | 10,000 | ? | ? | |
Dwell Time | -600 | -100 | -600 | ? | ? | |
Offsets | ||||||
X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |
Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |
Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |
Head Info | ||||||
Model | EMO-25 | VOL-25 | KR2-15 or TAM-15 | (varies) | EMO-300XT | |
PCB Type | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J | |
RTD Type | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | |
Plot Settings | (any) | (any) | (any) | (any) | (any) | |
Motor Settings | ||||||
Step Mode | 16th | 16th | 16th | 16th | ? | |
Motor Current | Normal | Normal | Normal | Normal | ? | |
Max Jog Rate | 5,000 | 10,000 | 15,000 | ? | ? | |
Rot Speed | 1,500 | 1,500 | 10,000 | ? | ? | |
Settings | EMO, VOL 27:1 Ratio |
VOL 51:1 Ratio |
EMO-XT, KR2, TAM 100:1 |
KR2-ST Super Torque |
EMO-300XT eXtra Torque |
PLASTIC Reservoir Heads: Table 1
Settings | SDS 1 ET | SDS 5 | SDS 10 | SDS/HSD/RSD 30 | SDS 60 | |||||
---|---|---|---|---|---|---|---|---|---|---|
Material | ||||||||||
Type | Custom | Custom | Custom | Custom | Custom | |||||
Color | (any) | (any) | (any) | (any) | (any) | |||||
Default Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 1.600 | |||||
Layer | (any) | (any) | (any) | (any) | (any) | |||||
Temp Info | ||||||||||
Print Temp | 0 | 0 | 0 | 0 | 0 | |||||
Power Factor | 100 | 100 | 100 | 100 | 100 | |||||
Minimum | 0 | 0 | 0 | 0 | 0 | |||||
Maximum | 0 | 0 | 0 | 0 / 75 / -10 | 0 | |||||
Overrides | ||||||||||
Pulses / µL | 270 | 87.3 | 58.7 | 26.8 | 17.4 | |||||
Note: Values above in BOLD have been validated through multiple sample testing, July 2020 or Oct 2021. | ||||||||||
Multiplier | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | |||||
Prime | ||||||||||
Steps | 3000 | 1500 | 3000 | 2250 | 1500 | |||||
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |||||
Dwell Time (ms) | 300 | 150 | 300 | 225 | 150 | |||||
Unprime | ||||||||||
Steps | 3000 | 1500 | 3000 | 2250 | 1500 | |||||
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |||||
Dwell Time | -300 | -150 | -300 | -300 | -300 | |||||
Offsets | ||||||||||
Clone Head | Off | Off | Off | Off | Off | |||||
X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |||||
Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |||||
Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |||||
Head Info | ||||||||||
Model | SDS | SDS-5 | SDS-10 | SDS-30 / HSD-30 / RSD-30 | SDS-60 | |||||
PCB Type | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J | |||||
RTD Type | None | None | None | None / 1k_PRTD / 1k_PRTD | None | |||||
Plot Settings | (any) | (any) | (any) | (any) | (any) | |||||
Motor Settings | ||||||||||
Step Mode | 16th | 16th | 16th | 16th | 16th | |||||
Motor Current | Normal | Normal | Normal | Normal | Normal | |||||
Max Jog Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |||||
Rot Speed | 1500 | 1500 | 1500 | 1500 | 1500 | |||||
Settings | SDS 1 ET | SDS 5 | SDS 10 | SDS/HSD/RSD 30 | SDS 60 |
PLASTIC Reservoir Heads: Table 2
Settings | HSD-10-Ardes | SDS-30-XT | SDS-60-XT | SDS-150-XT | DSD-50 |
---|---|---|---|---|---|
Material | |||||
Type | Custom | Custom | Custom | Custom | Custom |
Color | (any) | (any) | (any) | (any) | (any) |
Default Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 4.00 |
Layer | (any) | (any) | (any) | (any) | (any) |
Temp Info | |||||
Print Temp | 35 | 0 | 0 | 0 | 0 |
Power Factor | 100 | 100 | 100 | 100 | 100 |
Minimum | 0 | 0 | 0 | 0 | 0 |
Maximum | 75 | 0 | 0 | 0 | 0 |
Overrides | |||||
Pulses / µL | 1800 | 86 | 29.1 | 12.8 | 20 |
Note: Values above in BOLD have been validated through multiple sample testing, July 2020. | |||||
Multiplier | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 |
Prime | |||||
Steps | 9000 | 1125 | 1500 | 1500 | 1 |
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
Dwell Time (ms) | 900 | 115 | 150 | 150 | 1 |
Unprime | |||||
Steps | 9000 | 1125 | 1500 | 1500 | 1 |
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
Dwell Time | -900 | -300 | -300 | -300 | -100 |
Offsets | |||||
X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Head Info | |||||
Model | (varies) | (varies) | (varies) | (varies) | (varies) |
PCB Type | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J |
RTD Type | 1k_PLAT_RTD | None | None | None | None |
Plot Settings | (any) | (any) | (any) | (any) | (any) |
Motor Settings | |||||
Step Mode | 16th | 16th | 16th | 16th | 16th |
Motor Current | Normal | Normal | Normal | Normal | Normal |
Max Jog Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
Rot Speed | 7,500 | 1,500 | 1,500 | 1,500 | 1,500 |
Settings | HSD-10-Ardes | SDS-30-XT | SDS-60-XT | SDS-150-XT | DSD-50 |