3P Quick Cure Clay

From Hyrel3D
Revision as of 21:36, 28 January 2016 by Davo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Created by Dr. John Pojman, Professor of Polymers & Nonlinear Chemical Dynamics in the Department of Chemistry at the Louisiana State University.

3P Quck Cure Clay has a virtually unlimited working time, and is cured by initiating an exothermic frontal polymerization wave which cures (and heats) the entire mass. This is typically accomplished by means of a heat gun, although some success has been had by using a laser, also mounted on the printer.