Difference between revisions of "Other accessories"

From Hyrel3D
Jump to: navigation, search
 
(8 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
|}
 
|}
  
== '''Tool Position Accessories''' ==
+
Accessories other than print heads are available, some of which take a tool position.
  
 
=== Lasers ===
 
=== Lasers ===
  
Hot-swappable Lasers are available in the following configurations:
+
See our page for [[Lasers]].
 
 
* The LA5-808 is 5W at 808nm, and due to its wavelength, it is best suited for darker material.
 
* The LA6-450 is 6W at 450nm, and performs well on opaque material of any color.
 
 
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=Tz6mRSkOaSk Overview of the LA5-808 and LA6-450 Lasers]
 
 
 
The Reflectivity and Transparency or Translucency of your material will have a great impact on the effectiveness of the laser. Safety glasses are included with each laser.
 
  
 
=== Spindle Tools ===
 
=== Spindle Tools ===
Line 21: Line 14:
 
<gallery>
 
<gallery>
 
File:ST1.png|ST1
 
File:ST1.png|ST1
 +
File:ST3.jpg|ST3
 
</gallery>
 
</gallery>
  
Intended for light drilling and routing operations (especially circuit board work), the ST1 provides between 500 and 5000 RMP (depending on load) to a 1/8" chuck. Our Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers.
+
The ST1 is intended for light drilling and routing operations (especially circuit board work), and provides between 500 and 5,000 RMP (depending on load) to a 1/8" chuck. 12VDC, 4A, 40W.
 +
 
 +
The ST3 is intended for light drilling and machining operations (even on brass), and provides between 2,000 and 12,000 RMP (depending on load) to a 1/48" chuck. 48VDC, 8.3A, 400W.
  
== '''Other Tool Position Accessories''' ==
+
Our Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers.
  
The following accessories each take up a tool position while performing more passive functions:
+
=== '''Other Accessories''' ===
  
* The Inspector microscope provides magnification.
+
The following accessories each take up a tool position while performing more ancillary functions:
 +
 
 +
* The Mic200 (200x Microscope) provides magnification and capture of images and video.
 
* The Quiet Storm fan provides additional cooling.
 
* The Quiet Storm fan provides additional cooling.
 
* The Tramming Tool, provided with every printer, is used to level the build surface.
 
* The Tramming Tool, provided with every printer, is used to level the build surface.
 +
* The Precision Tool Setter! See https://www.youtube.com/watch?v=rW7h9z5DW5A
  
== '''Non-Tool Position Accessories''' ==
+
The following accessories are not loaded into tool positions on the yoke:
 
 
The following non-head accessories are also available:
 
  
 +
* The HTC - Enclosure Heater with Temperature Control is avialable in 120 and 240 VAC versions. [[:File:Htc.jpg|Spec Sheet]]
 
* The Feed Chamber Cooling Fan mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
 
* The Feed Chamber Cooling Fan mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
 
* The Printer Support Kit is included with every printer, and includes a build plate, blue tape, and a variety of handy tools like tweezers, razors, and a spatula.
 
* The Printer Support Kit is included with every printer, and includes a build plate, blue tape, and a variety of handy tools like tweezers, razors, and a spatula.
* The SDK | Software Developer's Kit provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
+
* The SDK - Software Developer's Kit provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
* The LTK | Luer Tip Kit provides an EMO to Luer adapter and a variety of luer lock needles.
+
* The LTK - Luer Tip Kit provides an EMO to Luer adapter and a variety of luer lock needles.
 
* The Syringe Kit provides syringes in quantity.
 
* The Syringe Kit provides syringes in quantity.
 
* The Drill Bit Kit provides an assortment of drilling bits and end mills for the Spindle Tool.
 
* The Drill Bit Kit provides an assortment of drilling bits and end mills for the Spindle Tool.
 
* The Filament Kit provides a variety of filaments to get you started with your printer.
 
* The Filament Kit provides a variety of filaments to get you started with your printer.

Latest revision as of 15:08, 16 August 2021

Accessories other than print heads are available, some of which take a tool position.

Lasers

See our page for Lasers.

Spindle Tools

The ST1 is intended for light drilling and routing operations (especially circuit board work), and provides between 500 and 5,000 RMP (depending on load) to a 1/8" chuck. 12VDC, 4A, 40W.

The ST3 is intended for light drilling and machining operations (even on brass), and provides between 2,000 and 12,000 RMP (depending on load) to a 1/48" chuck. 48VDC, 8.3A, 400W.

Our Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers.

Other Accessories

The following accessories each take up a tool position while performing more ancillary functions:

  • The Mic200 (200x Microscope) provides magnification and capture of images and video.
  • The Quiet Storm fan provides additional cooling.
  • The Tramming Tool, provided with every printer, is used to level the build surface.
  • The Precision Tool Setter! See https://www.youtube.com/watch?v=rW7h9z5DW5A

The following accessories are not loaded into tool positions on the yoke:

  • The HTC - Enclosure Heater with Temperature Control is avialable in 120 and 240 VAC versions. Spec Sheet
  • The Feed Chamber Cooling Fan mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
  • The Printer Support Kit is included with every printer, and includes a build plate, blue tape, and a variety of handy tools like tweezers, razors, and a spatula.
  • The SDK - Software Developer's Kit provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
  • The LTK - Luer Tip Kit provides an EMO to Luer adapter and a variety of luer lock needles.
  • The Syringe Kit provides syringes in quantity.
  • The Drill Bit Kit provides an assortment of drilling bits and end mills for the Spindle Tool.
  • The Filament Kit provides a variety of filaments to get you started with your printer.