Difference between revisions of "Materials"
| Line 49: | Line 49: | ||
| [[EMO-25]] || n/a || n/a || n/a || yes | | [[EMO-25]] || n/a || n/a || n/a || yes | ||
|- | |- | ||
| − | ! Metal Clay, including Precious Metal Clay | + | ! Metal Clay, including <br/> Precious Metal Clay |
| [[EMO-25]] || n/a || n/a || n/a || yes | | [[EMO-25]] || n/a || n/a || n/a || yes | ||
|- | |- | ||
Revision as of 22:55, 5 February 2014
Materials Printable one Hyrel Machines
The following is a list of materials with which the Hyrel machines can print:
| Material | Extruder | HotHead (°C) | Fan Speed | HotBed (°C) | Verified? |
|---|---|---|---|---|---|
| ABS | MK-1 | ~225 | 30% | 60 | yes |
| PLA | MK-1 | ~225 | 30% | 60 | yes |
| PlastInk Rubber | MK-1 | ~225 | 30% | 60 | yes |
| NinjaFlex | MK-1 | ~225 | 30% | 60 | yes |
| Nylon | MK-1 | ~225 | 30% | 60 | yes |
| T-Glaze | MK-1 | ~225 | 30% | 60 | yes |
| BendLay | MK-1 | ~225 | 30% | 60 | no |
| LayBrick | MK-1 | ~225 | 30% | 60 | no |
| LayWoo-d3 | MK-1 | ~225 | 30% | 60 | no |
| PET | MK-1 | ~225 | 30% | 60 | no |
| PVA | MK-1 | ~225 | 30% | 60 | no |
| Clay | EMO-25 | n/a | n/a | n/a | yes |
| Metal Clay, including Precious Metal Clay |
EMO-25 | n/a | n/a | n/a | yes |
| Porcelain | EMO-25 | n/a | n/a | n/a | yes |
| Plasticine | EMO-25 | n/a | n/a | n/a | yes |
| Plah-Doh | EMO-25 | n/a | n/a | n/a | yes |
| Sugru | EMO-25 | n/a | n/a | n/a | yes |
| RTV Silicone | EMO-25 | n/a | n/a | n/a | yes |
| GoodFilla | EMO-25 | n/a | n/a | n/a | no |
