|
|
| (13 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | [[Category:Settings]] | + | #REDIRECT [[Filament Heads]] |
| − | {| align="right"
| |
| − | | __TOC__
| |
| − | |}
| |
| − | | |
| − | Settings for the MK1-250:
| |
| − | | |
| − | ; Material
| |
| − | : '''ABS'''
| |
| − | : '''(any)''' Color
| |
| − | : '''0.500''' mm Nozzle
| |
| − | : '''(any)''' Layer Z (will be overwritten with gcode value)
| |
| − | ; Temp Info
| |
| − | : '''240''' Print Temperature
| |
| − | : '''100''' Pwr Factor
| |
| − | : '''(any)''' Min
| |
| − | : '''(any)''' Max
| |
| − | ; OverRides
| |
| − | : '''0.780''' Pulses
| |
| − | : '''1.000''' Feed Rate %
| |
| − | ; Prime
| |
| − | : '''250''' Steps
| |
| − | : '''10,000''' Rate
| |
| − | : '''50''' ms Dwell Time
| |
| − | : '''1''' Prime After Tool Change
| |
| − | ; Unprime
| |
| − | : '''250''' Steps
| |
| − | : '''10,000''' Rate
| |
| − | : '''60''' ms Dwell Time
| |
| − | : '''1''' Unprime Before Tool Change
| |
| − | ; Offsets
| |
| − | : '''OFF''' Clone Head
| |
| − | : '''0.000''' X
| |
| − | : '''0.000''' Y
| |
| − | : '''0.000''' Z
| |
| − | ; '''Head Info
| |
| − | : '''MK1''' Model
| |
| − | : '''1 Meg''' RTD Type
| |
| − | : '''High''' Motor Current
| |
| − | : '''Sixteenth''' Step Mode
| |
