Revision as of 22:35, 1 February 2018

A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material	Extruder	Head (°C)	Fan %*	HotBed (°C)	v2.x mm/min	v3/4.x mm/min
ABS	MK1-250	240/235	10 (=25.5%)	80	2000	4000
PLA	MK1-250	185/180	10 (=25.5%)	40	2000	4000
PlastInk Rubber	MK1-250	225	10 (=25.5%)	50	2000	4000
NinjaFlex	MK1-250	225	10 (=25.5%)	50	2000	4000
Nylon	MK1-250	225	10 (=25.5%)	80	2000	4000
T-Glase	MK1-250	225	10 (=25.5%)	80	2000	4000
BendLay	MK1-250	225	10 (=25.5%)	50	500	500
LayBrick	MK1-250	225	10 (=25.5%)	80	500	500
LayWoo-d3	MK1-250	220/205	10 (=25.5%)	80	2000	4000
PET	MK1-250	210	10 (=25.5%)	40	500	500
PVA	MK1-250	210	10 (=25.5%)	40	500	500
Clay	EMO-25	n/a	n/a	n/a	20	20
Metal Clay, Precious Metal Clay	EMO-25	n/a	n/a	n/a	20	20
Polypropylene	MK1-250	235	10 (=25.5%)	80	2000	4000
Polycarbonate	MK1-350	350	10 (=25.5%)	80	2000	4000
Porcelain	EMO-25	n/a	n/a	n/a	20	20
Plasticine	EMO-25	n/a	n/a	n/a	500	500
Play-Doh	EMO-25	n/a	n/a	n/a	250	250
Sculpey	EMO-25	n/a	n/a	n/a	250	250
Sugru	EMO-25	n/a	n/a	n/a	250	250
RTV Silicone	EMO-25	n/a	n/a	n/a	250	250
Flex45	MK2-250	temp	fan	bed	v2	v4
HIPS	MK1-250	temp	fan	bed	v2	v4
Moldlay	MK2-250	temp	fan	bed	v2	v4
PETG	MK1-250	temp	fan	bed	v2	v4
PEG	KRA-15	temp	fan	bed	v2	v4
PEEK	MK1-450	temp	fan	bed	v2	v4
Wax (molten)	KRA-15	temp	fan	bed	v2	v4
Wax (filament)	MK1-250	temp	fan	bed	v2	v4
PCL	KRA-15	temp	fan	bed	v2	v4
PPSU	MK1-450	temp	fan	bed	v2	v4

Note: Be sure the fan directs air to the material and not directly at the nozzle.
Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.

@@ Line 81: / Line 81: @@
 |-
 ! [http://en.wikipedia.org/wiki/Flex45 Flex45]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[MK2-250]] ||| temp|| fan || bed || v2|| v4
 |-
 ! [http://en.wikipedia.org/wiki/HIPS HIPS]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[MK1-250]] ||| temp|| fan || bed || v2|| v4
 |-
-! [http://en.wikipedia.org/wiki/NoldLay Moldlay]
+! [http://en.wikipedia.org/wiki/MoldLay Moldlay]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[MK2-250]] ||| temp|| fan || bed || v2|| v4
 |-
 ! [http://en.wikipedia.org/wiki/PETG PETG]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[MK1-250]] ||| temp|| fan || bed || v2|| v4
 |-
 ! [http://en.wikipedia.org/wiki/PEG PEG]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[KRA-15]] ||| temp|| fan || bed || v2|| v4
 |-
 ! [http://en.wikipedia.org/wiki/PEEK PEEK]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[MK1-450]] ||| temp|| fan || bed || v2|| v4
 |-
 ! [http://en.wikipedia.org/wiki/Wax_(molten) Wax (molten)]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[KRA-15]] ||| temp|| fan || bed || v2|| v4
 |-
 ! [http://en.wikipedia.org/wiki/Wax_(filament) Wax (filament)]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[MK1-250]] ||| temp|| fan || bed || v2|| v4
 |-
 ! [http://en.wikipedia.org/wiki/PCL PCL]
-| [[head]] ||| temp|| fan || bed || v2|| v4
+| [[KRA-15]] ||| temp|| fan || bed || v2|| v4
+|-
+! [http://en.wikipedia.org/wiki/PPSU PPSU]
+| [[MK1-450]] ||| temp|| fan || bed || v2|| v4
 |-
 |}