Difference between revisions of "Archive"
(→METAL Reservoir Heads) |
(→METAL Reservoir Heads) |
||
| Line 440: | Line 440: | ||
| 1000 | | 1000 | ||
| 6000 | | 6000 | ||
| − | | | + | | 6000 |
| 0 | | 0 | ||
|- | |- | ||
| Line 447: | Line 447: | ||
| 10,000 | | 10,000 | ||
| 10,000 | | 10,000 | ||
| − | | | + | | 10,000 |
| 10,000 | | 10,000 | ||
|- | |- | ||
| Line 453: | Line 453: | ||
| 600 | | 600 | ||
| 100 | | 100 | ||
| + | | 600 | ||
| 600 | | 600 | ||
| 0 | | 0 | ||
| Line 462: | Line 463: | ||
| 1000 | | 1000 | ||
| 6000 | | 6000 | ||
| − | | | + | | 6000 |
| 0 | | 0 | ||
|- | |- | ||
| Line 469: | Line 470: | ||
| 10,000 | | 10,000 | ||
| 10,000 | | 10,000 | ||
| − | | | + | | 10,000 |
| 10,000 | | 10,000 | ||
|- | |- | ||
| − | ! Dwell Time | + | ! Dwell Time (ms) |
| − | | | + | | 600 |
| − | | | + | | 100 |
| − | | | + | | 600 |
| − | | | + | | 600 |
| 0 | | 0 | ||
|- | |- | ||
Revision as of 13:44, 7 July 2025
Settings for Filament Heads
All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below.
Please note that as of v4, you can right-click on the head and "load settings from file" to avoid having to type them in manually.
Older settings are listed here.
Some settings for the MK-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (0.5mm is default) AND what path width you sliced for (recipe path or extrusion width should be nozzle diameter plus 10%). Having said that, here are our default shipping settings:
| Settings | FH2-260 | FH2-450 | MK1-250, MK2-250 DISCONTINUED |
MK1-450 DISCONTINUED |
HT1-250 DISCONTINUED |
HT1-450 DISCONTINUED |
HT3-250 DISCONTINUED |
HT3-450 DISCONTINUED |
|---|---|---|---|---|---|---|---|---|
| Material | ||||||||
| Type | (any) | (any) | (any) | (any) | (any) | (any) | (any) | (any) |
| Color | (any) | (any) | (any) | (any) | (any) | (any) | (any) | (any) |
| Nozzle | 0.500 | 0.500 | 0.500 | 0.500 | 0.500 | 0.500 | 0.500 | 0.500 |
| Layer | (any) | (any) | (any) | (any) | (any) | (any) | (any) | (any) |
| Temp Info | ||||||||
| Max Print Temp | 260 | 450 | 240 | 410 | 240 | 410 | 240 | 410 |
| Power Factor | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Minimum | 0 | 270 | 0 | 290 | 0 | 290 | 0 | 290 |
| Maximum | 250 | 450 | 250 | 450 | 250 | 450 | ||
| Overrides | ||||||||
| Pulses / µL | 360 | 360 | 84.5 | 84.5 | 175 | 175 | ? | ? |
| Multiplier | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 |
| Prime | ||||||||
| Steps | 200 | 200 | 200 | 200 | 300 | 300 | ? | ? |
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Dwell Time | 20 | 20 | 35 | 35 | 30 | 30 | ? | ? |
| Before Tool Change | 2 / n/a / n/a | |||||||
| Unprime | ||||||||
| Steps | 200 | 200 | 200 | 200 | 300 | 300 | ? | ? |
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Dwell Time | -20 | -20 | -35 | -35 | -30 | -30 | ? | ? |
| After Tool Change | 2 / n/a / n/a | |||||||
| Offsets | ||||||||
| Clone Head | Off | Off | Off | Off | Off | Off | Off | Off |
| X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
| Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
| Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
| Head Info | ||||||||
| Model | FH2-260 | FH2-450 | MK1, MK2 | MK450 | MK1, MK2 | MK450 | MK1, MK2 | MK450 |
| PCB Type | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J |
| RTD Type | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD |
| Plot Settings | (any) | (any) | (any) | (any) | (any) | (any) | (any) | (any) |
| Motor Settings | ||||||||
| Step Mode | 16th | 16th | 16th | 16th | 16th | 16th | 16th | 16th |
| Motor Current | Normal | Normal | Normal | Normal | Normal | Normal | Normal | Normal |
| Max Jog Rate | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 |
| Rot Speed | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 |
| Settings | FH2-260 | FH2-450 | MK1-250, MK2-250 DISCONTINUED |
MK1-450 DISCONTINUED |
HT1-250 DISCONTINUED |
HT1-450 DISCONTINUED |
HT3-250 DISCONTINUED |
HT3-450 DISCONTINUED |
Settings for Reservoir Heads
All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below.
Please note that as of v4, you can right-click on the head and "load settings from file" to avoid having to type them in manually.
Older settings are listed here.
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings:
METAL Reservoir Heads
| Settings | EMO, VOL 27:1 Ratio |
VOL 51:1 Ratio |
EMO-XT, KR2, TAM 100:1 |
EMO-ST, KR2-ST Super Torque |
EMO-300XT eXtra Torque | |
|---|---|---|---|---|---|---|
| Material | ||||||
| Type | Custom | Custom | Custom | Custom | Custom | |
| Color | (any) | (any) | (any) | (any) | (any) | |
| Default Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 1.600 | |
| Layer | (any) | (any) | (any) | (any) | (any) | |
| Temp Info | ||||||
| Print Temp | 0 | 0, 35 | 35 | (varies) | 0 | |
| Power Factor | 100 | 100 | 100 | 100 | 100 | |
| Minimum | 0 | 0 | 0 | 0 | 0 | |
| Maximum | 0 | 90 | 0 / 180 / 270 | 0 | 0 | |
| Overrides | ||||||
| Pulses / µL | 271.9 | 517 | 1297 | ? | 71 | |
| Note: Values above in BOLD have been validated through multiple sample testing, July 2020. | ||||||
| Multiplier | 1 | 1 | 1 | 1 | 1 | |
| Prime | ||||||
| Steps | 6000 | 1000 | 6000 | 6000 | 0 | |
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |
| Dwell Time (ms) | 600 | 100 | 600 | 600 | 0 | |
| Unprime | ||||||
| Steps | 6000 | 1000 | 6000 | 6000 | 0 | |
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |
| Dwell Time (ms) | 600 | 100 | 600 | 600 | 0 | |
| Offsets | ||||||
| X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |
| Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |
| Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |
| Head Info | ||||||
| Model | EMO-25 | VOL-25 | KR2-15 or TAM-15 | (varies) | EMO-300XT | |
| PCB Type | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J | |
| RTD Type | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | 1k_PRTD | |
| Plot Settings | (any) | (any) | (any) | (any) | (any) | |
| Motor Settings | ||||||
| Step Mode | 16th | 16th | 16th | 16th | 16th | |
| Motor Current | Normal | Normal | Normal | Normal | Normal | |
| Max Jog Rate | 5,000 | 10,000 | 15,000 | ? | 10,000 | |
| Rot Speed | 1,500 | 1,500 | 10,000 | ? | 10,000 | |
| Settings | EMO, VOL 27:1 Ratio |
VOL 51:1 Ratio |
EMO-XT, KR2, TAM 100:1 |
KR2-ST Super Torque |
EMO-300XT eXtra Torque | |
PLASTIC Reservoir Heads: Table 1
| Settings | SDS 1 ET | SDS 5 | SDS 10 | SDS/HSD/RSD 30 | SDS 60 | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | ||||||||||
| Type | Custom | Custom | Custom | Custom | Custom | |||||
| Color | (any) | (any) | (any) | (any) | (any) | |||||
| Default Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 1.600 | |||||
| Layer | (any) | (any) | (any) | (any) | (any) | |||||
| Temp Info | ||||||||||
| Print Temp | 0 | 0 | 0 | 0 | 0 | |||||
| Power Factor | 100 | 100 | 100 | 100 | 100 | |||||
| Minimum | 0 | 0 | 0 | 0 | 0 | |||||
| Maximum | 0 | 0 | 0 | 0 / 75 / -10 | 0 | |||||
| Overrides | ||||||||||
| Pulses / µL | 270 | 87.3 | 58.7 | 26.8 | 17.4 | |||||
| Note: Values above in BOLD have been validated through multiple sample testing, July 2020 or Oct 2021. | ||||||||||
| Multiplier | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | |||||
| Prime | ||||||||||
| Steps | 3000 | 1500 | 3000 | 2250 | 1500 | |||||
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |||||
| Dwell Time (ms) | 300 | 150 | 300 | 225 | 150 | |||||
| Unprime | ||||||||||
| Steps | 3000 | 1500 | 3000 | 2250 | 1500 | |||||
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |||||
| Dwell Time | -300 | -150 | -300 | -300 | -300 | |||||
| Offsets | ||||||||||
| Clone Head | Off | Off | Off | Off | Off | |||||
| X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |||||
| Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |||||
| Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | |||||
| Head Info | ||||||||||
| Model | SDS | SDS-5 | SDS-10 | SDS-30 / HSD-30 / RSD-30 | SDS-60 | |||||
| PCB Type | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J | |||||
| RTD Type | None | None | None | None / 1k_PRTD / 1k_PRTD | None | |||||
| Plot Settings | (any) | (any) | (any) | (any) | (any) | |||||
| Motor Settings | ||||||||||
| Step Mode | 16th | 16th | 16th | 16th | 16th | |||||
| Motor Current | Normal | Normal | Normal | Normal | Normal | |||||
| Max Jog Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | |||||
| Rot Speed | 1500 | 1500 | 1500 | 1500 | 1500 | |||||
| Settings | SDS 1 ET | SDS 5 | SDS 10 | SDS/HSD/RSD 30 | SDS 60 | |||||
PLASTIC Reservoir Heads: Table 2
| Settings | HSD-10-Ardes | SDS-30-XT | SDS-60-XT | SDS-150-XT | DSD-50 |
|---|---|---|---|---|---|
| Material | |||||
| Type | Custom | Custom | Custom | Custom | Custom |
| Color | (any) | (any) | (any) | (any) | (any) |
| Default Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 4.00 |
| Layer | (any) | (any) | (any) | (any) | (any) |
| Temp Info | |||||
| Print Temp | 35 | 0 | 0 | 0 | 0 |
| Power Factor | 100 | 100 | 100 | 100 | 100 |
| Minimum | 0 | 0 | 0 | 0 | 0 |
| Maximum | 75 | 0 | 0 | 0 | 0 |
| Overrides | |||||
| Pulses / µL | 1800 | 86 | 29.1 | 12.8 | 20 |
| Note: Values above in BOLD have been validated through multiple sample testing, July 2020. | |||||
| Multiplier | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 |
| Prime | |||||
| Steps | 9000 | 1125 | 1500 | 1500 | 1 |
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Dwell Time (ms) | 900 | 115 | 150 | 150 | 1 |
| Unprime | |||||
| Steps | 9000 | 1125 | 1500 | 1500 | 1 |
| Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Dwell Time | -900 | -300 | -300 | -300 | -100 |
| Offsets | |||||
| X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
| Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
| Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
| Head Info | |||||
| Model | (varies) | (varies) | (varies) | (varies) | (varies) |
| PCB Type | 4988/160J | 4988/160J | 4988/160J | 4988/160J | 4988/160J |
| RTD Type | 1k_PLAT_RTD | None | None | None | None |
| Plot Settings | (any) | (any) | (any) | (any) | (any) |
| Motor Settings | |||||
| Step Mode | 16th | 16th | 16th | 16th | 16th |
| Motor Current | Normal | Normal | Normal | Normal | Normal |
| Max Jog Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
| Rot Speed | 7,500 | 1,500 | 1,500 | 1,500 | 1,500 |
| Settings | HSD-10-Ardes | SDS-30-XT | SDS-60-XT | SDS-150-XT | DSD-50 |
