Published Papers (DIW)

The Published Papers page ran too long, so the pages for Unheated or Chilled Reservoir Printing are listed here, by year of publication.

Unheated or Chilled Reservoir Printing

Also known as Robocasting or DIW (Direct Ink Writing), SEP (Semisolid Extrusion Printing), SSE (Semisolid Extrusion). 3DCP (3D Concrete Printing), or DCC (Digital Concrete Construction).

DIW/SEP/SSE, 2025

• Hierarchically Ordered Porous Transition Metal Compounds From One-pot Type 3D Printing Approaches by a team from several departments of Cornell University, Brookhaven National Laboratory, University of Grenoble Alpes, France, National Institute of Standards and Technology, and Boston University
• Visible-Light Photocatalytic Degradation of Cresols using Sustainable 3D-Printed Bi₄O₅I₂-Hematite Scaffold by a team from various departments of Indian Institute of Technology, Kharagpur, Rice University, State University of Campinas, São Paulo, and University of Brasília
• Modeling and Characterization of Additively Manufactured Barium Titanate Ceramic a thesis submitted to the Aerospace and Mechanical Engineering Department of the University of Texas at El Paso
• Filament Geometry Control of Printable Geopolymer Using Experimental and Data Driven Approaches by a team from the Department of Civil and Mechanical Engineering, Technical University of Denmark
• Material Extrusion of Photocurable Alumina Pastes: Rheology, Printability, and Polycrystal Microstructure Characterization by a team from Faculty of Chemistry, Warsaw University of Technology
• Recovery and Recycling Processes of Thermoset Elastomers and Polyurethanes Processing Scrap, a thesis submitted to the University of Turin
• Hexagonal Boron Nitride Reinforced Quick-setting Multifunctional Cement by a team from Rice University, Michigan State University, and Aramco Americas
• Multifunctional Liquid Crystal Elastomers for Muscle Inspired Actuation, a paper submitted in pursuit of a PhD to Carnegie Mellon University
• Development of Highly Conductive and Stable Direct Writeable Metal-Free Inks Based on Carbon Nanotube and Functionalized Graphene Oxide by a team from Department of Mechanical Engineering, University of Maryland College Park
• A Recyclable, Reshapable and Uv-curable Polybenzoxazine Vitrimer Enabling Closed-loop 3D Printing Applications by a team from Luxembourg Institute of Science and Technology (LIST) and Department of Physics and Materials Science, University of Luxembourg
• Verbena Officinalis L. Herb Extract, Its Amino Acids Preparations and 3D-printed Dosage Forms: Phytochemical, Technological, and Pharmacological Research by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, Institute of Chemistry, Faculty of Science and Technology, University of Tartu, Department of Pharmaceutical Management, Drug Technology and Pharmacognosy, Ivano-Frankivsk National Medical University, and Institute for Advanced Training of Pharmacy Specialists, The National University of Pharmacy, Kharkiv
• Dielectric Barrier Discharge Electrothermal Heating and Additive Manufacturing of Thermoset Parts by a team from the Artie McFerrin Department of Chemical Engineering, Texas A&M University
• Flexible Multichannel Muscle Impedance Sensors for Collaborative Human-machine Interfaces by a team from the School of Mechanical and Aerospace Engineering, Nanyang technological University
• Leveraging the Shape Fidelity of 3D Printed Bone Scaffolds Through Architectural Tailoring of an Emulsion Ink: A Combined Experimental and Computational Analysis by a team from IIT Delhi
• Design and Fabrication Workflow for Vertebrate Soft Robots by a team from the Singapore University of Technology and Design (SUTD)
• Embedded 3D Printing of Isotropically Enhanced Lattice Structure with Programmable Elasticity via Three-Dimensional Fiber Alignment by a team from Department of Material Science and Engineering, University of California, Berkeley, Department of Civil and Environmental Engineering, University of California, Los Angeles,Department of Engineering, University of Cambridge, UK, and Manufacturing Science Division, Oak Ridge National Laboratory
• Self-Sensing Composites via an Embedded 3D-Printed PVDF-MoS2 Nanosensor for Structural Health Monitoring by a team from the Universities of North Texas, Oklahoma, Pennsylvania, and Tennessee, as well as Oak Ridge National Laboratory and the U.S. Department of Energy
• 3D-printable Scaffolds via Diw From Ceramic Pastes of Zno Nanoparticles Without Organic Binders and Their Application as Reusable Photocatalysts for the Degradation of Bisphenol A by a team from CIMAV's Advanced Functional Materials & Nanotechnology Group. Centro de Investigación en Materiales Avanzados S.C.
• 3D-printed Mil-101(Cr)-monoliths for Butanol and Cyclohexane Removal: Insights Into Rheological Behavior and Adsorption Capacity by a team from seven different organizations in Mexico and Iran
• Adaptive Core-shell 3D Printing of Hollow Fiber Actuators by a team from Johns Hopkins University's Department of Civil and Systems Engineering and Hopkins Extreme Materials Institute (HEMI)
• Chemically Foamed Geopolymers for 3D Printing Applications by a team from Department of Civil and Mechanical Engineering, Technical University of Denmark and several engineering departments of the University of Aveiro, Portugal
• Rheological Behaviour and Printability Optimization of Geopolymer Ink for Direct Ink Writing by a team from Department of Chemical Engineering, B. M. S. College of Engineering, Bengaluru and Department of Chemical Engineering, National Institute of Technology, Warangal
• De novo Autogenic Engineered Living Functional Materials by a team from multiple departments of both Virginia Tech and Northeastern University, Boston
• Extrusion-Based 3D Printing of Plant-Origin Flavonoids Using Aqueous Polyethylene Oxide Gel Inks by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, Department of Pharmacognosy and Nutriciology, The National University of Pharmacy, Kharkiv, and CurifyLabs Oy, Helsinki
• Solvent Evaporation-assisted Direct Ink Writing Using Polar Solvent for Flexible Polyvinyl Fluoride Piezoelectric Composites in Enhancement of Piezoelectric Properties by a team from Department of Aerospace and Mechanical Engineering, The University of Texas at El Paso
• Eic Acid Encapsulated 3D Printed Polycaprolactone/polyvinylpyrrolidone Scaffolds for Wound Healing Applications by a team from COMSATS University Islamabad, Lahore Campus, Marmara University, Yildiz Teknik Üniversitesi, and Health Institutes of Türkiye (Turkey) (TUSEB)
• Electrical Properties of PVDF/PZT Composite Films Prepared by Direct Ink Writing by a team from School of Materials Science and Engineering, Central South University, Changsha, State Key Laboratory of Powder Metallurgy, Central South University, Changsha, and the National Key Laboratory of Aerospace Mechanism, Institute of Aerospace System Engineering Shanghai
• Enhanced Mechanical, Tribological, and Thermal Properties of Copper-graphene Composites Using Additive Manufacturing by a team from Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, Amity Institute of Applied Sciences, Amity University, Noida, Carbon Center of Excellence Morgan Advanced Materials, State College, PA, The John and Willie Leone Family Department of Energy and Mineral Engineering, Penn State University, and Department of Materials Engineering, Indian Institute of Technology, Jammu
• Direct Ink Writing of Metals and Metal‑based Heterostructures by a team from Department of Materials Science and Nanoengineering, Rice University, Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur
• Direct Ink Writing (3D Printing) of Robust, Highly Efficient, Double-Half-Heusler Thermoelectric High-Entropy Alloy, by a team from Faculty of Materials Science and Engineering, Jimma Institute of Technology, Jimma University, Ethiopia and Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur
• Hexagonal Boron Nitride Reinforced Quick-setting Multifunctional Cement by a team from Department of Materials Science and NanoEngineering, Rice University, Department of Civil and Environmental Engineering, Rice University, Department of Chemistry, Rice University, Department of Mechanical Engineering, Michigan State University, and Aramco Americas
• Machine Learning-driven Ultrasonic Monitoring for Quality Assurance in Additive Manufacturing Employing 2D Phononic Coupons by a team from Clarkson University, Potsdam
• Semi-solid Extrusion 3D Printing of Plant-origin Rosmarinic Acid Loaded in Aqueous Polyethylene Oxide Gels by a team from Institute of Pharmacy, University of Tartu, National University of Pharmacy, Kharkiv, Kyiv International University, Kiev, and Curify Labs
• Development of 3D-printed Dosage Forms With Rutin published by the Ministry of Health of Ukraine
• Additive Manufacturing of Textured Barium Titanate Ceramics via Shear Force-induced Platelet Alignment by a team from Department of Aerospace and Mechanical Engineering, The University of Texas at El Paso
• Solidago Canadensis L. Herb Extract, Its Amino Acids Preparations and 3D-Printed Dosage Forms: Phytochemical, Technological, Molecular Docking and Pharmacological Research File:Preprints202502.2331.v1.pdf by a team from Uniersity of Tartu
• Alginate Crosslinking Beyond Calcium: Unlocking the Potential of a Range of Divalent Cations for Fiber Formation by a team from University of Florence, Université de Strasbourg, and CNRS
• Fabrication of Hypoxia-Mimicking Supramolecular Hydrogels for Cartilage Repair by a team from Regenerative Medicine and Stem Cell Laboratory (RMS), Department of Biomedical Engineering, Indian Institute of Technology Hyderabad and Department of Materials Science and Metallurgical Engineering, Indian Institute of Technology Hyderabad
• Direct Ink Writing of Coaxial Electrostatic Fibers With Customizable Cross-sections and Functional Properties by a team from School of Mechanical and Aerospace Engineering, Nanyang Technological University
• High-Performance Bionic Architectures via 3D Printing of Recycled Kevlar: A Study of Laser Ablation and Mechanical Properties by a team from Institute for Frontier Materials, Deakin University, Waurn Ponds Campus, Geelong, Victoria, Australia, Royal Australian Mint, Canberra, Australian Capital Territory, Australia, and Ministry of Defence, India
• Microgel-Guided MXene Assembly for High-Performance, Low-Solid Content Conductive Inks by a team from the departments of Chemical Engineering and Biomedical Engineering of the University of South Carolina

Top

DIW/SEP/SSE, 2024

• Enhanced Mechanical Properties of Direct Ink Writing (3D Printed) Hexagonal Boron Nitride Reinforced Porous Boehmite Structures by a team from Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, and Shell Technology Centre Bangalore, India
• Comparative Research in the Extracts of Matricaria Chamomilla L. Flowers and Matricaria Discoidea DC. Herb and Their 3D-printed Dosage Forms (Starts on page 134), by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu and National University of Pharmacy, Kharkiv
• Effects of Water-Soluble Binders on Direct Ink Writing Silicon Anode in Lithium-Ion Batteries by a researcher from Texas State University
• PhD School: Navigating Interdisciplinary Challenges: Taking A Low-power Wireless Plantar Pressure Monitoring System with 3D-Printed Sensors as An Example by a team from KU Leuven (Katholieke Universiteit Leuven)
• 3D-printable Wound Patch Composed of Vitamin E-enriched Polylactic Acid Scaffolds by a team from Pritzker School of Molecular Engineering, University of Chicago, Department of Cell and Molecular Biology and Microbiology, Faculty of Biological Science and Technology, University of Isfahan, Health Institutes of Türkiye (TUSEB), Center for Nanotechnology & Biomaterials Application and Research (NBUAM), Marmara University, and Genetic and Metabolic Diseases Research and Investigation Center, Marmara University
• Anisotropic and Heterogeneous Thermal Conductivity in Programmed Liquid Metal Composites Through Direct Ink Writing by a team from Virginia Tech and University of Nebraska-Lincoln
• The Selective Adsorption of Anionic Dyes Over 3D Printing Composite Sorbents of Aerogel and Porous Carbon by a team from the School of Chemical Engineering, Nanjing Tech University
• 3D Printed Carbon Nanotube/Phenolic Composites for Thermal Dissipation and Electromagnetic Interference Shielding by a team from Texas A&M University and Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A*STAR)
• Direct Ink Writing of Metals and Metal-based Heterostructures by a team from Department of Materials Science and NanoEngineering, Rice University, Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, and Lyten, Inc., San Jose, CA
• Mechanical Properties and Crack Deflection Mechanisms in 3D-printed Porous Geopolymers with Cellular Structures by a team from the Department of Civil and Mechanical Engineering, Technical University of Denmark
• Direct Ink Writing and Rapid Microwave Sintering of Alumina by a team from the Department of Ceramic Engineering and the Department of Mechanical Engineering of IIT (BHU), Varanasi
• Strengthening SiC Ceramic Structural Integrity Made via 3D Printing with Pyrolysis and Precursor Infiltration, by a team from Indian Institute of Technology, Kharagpur, Siksha ‘O’ Anusandhan University, Bhubaneswar, Odisha, and Vikram Sarabhai Space Centre, Trivandrum
• Phytochemical and Pharmacological Study on the Dry Extract of Matricaria discoidea DC. herb and its Amino Acids Preparations by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, Department of Pharmacognosy and Nutritionology, National University of Pharmacy, Kharkiv, Institute of Pharmaceutical Technologies, Lithuanian University of Health Sciences, Kaunas,, and Department of Clinical Pharmacology, Institute for Continuing Education of Pharmacy Professionals, National University of Pharmacy, Kharkiv
• Evaluation of Post-Processing on Additive Manufactured Bioresorbable Polymers for Medical Devices by a team from Poly-Med, Inc. and Clemson University
• Synergistic Regulation of Sintering Temperature in Calcium Silicide-infused Porcelain Ceramic 3D Printing for Dephosphorization and Deoxygenation by a team from Department of Mechanical Engineering, Indian Institute of Technology Tirupati
• Engineering the Atomic Interface of Refractory-Metal-Reinforced Copper Matrix Using Direct Ink 3D Printing by a team from Indian Institute of Technology Kharagpur, Indian Institute of Technology Jammu, Universidade Federal do Rio Grande do Norte, and Universidade Federal de Pernambuco
• Robocasting of Hierarchical Porous Al2O3 Structures: A Computational and Experimental Methodology for Porosity Estimation and its Effect by a team from the International Hellenic University's Department of Industrial Engineering and Management and Digital Manufacturing and Materials Characterization Laboratory
• Preparation and Characterization of Composites With Quasi-2D and Quasi-1D van der Waals Materials, a PhD dissertation submitted to the University of California, Riverside, Department of Electrical and Computer Engineering
• 3D Printed Mesoporous Superconductors With Periodic Order on Three Length Scales and Enhanced Properties via Block Copolymer Directed Self-Assembly by a team from Department of Materials Science and Engineering, Cornell University and 10 other organizations
• 3D Printing of Biocompatible and Antibacterial Silica–Silk–Chitosan-Based Hybrid Aerogel Scaffolds Loaded with Propolis by a team from University of Cologne, NETZSCH-Gerätebau Company, and Tarbiat Modares University
• Utilization of Central Composite Design for the Production of Hydrogel Blends for 3D Printing by a team from University of Brasilia
• Slurry Material Extrusion of Chopped Carbon Fiber Reinforced Silicon Carbide Ceramic Matrix Composites (CMCS) by a team from the School of Materials Engineering, Purdue University
• 3D Printed Porous Silicone Polymer Composites Using Table Salt as a Sacrificial Template by a team from Los Alamos National Laboratory's departments of Chemical Diagnostics and Engineering, Fabrication Manufacturing Sciences, and Weapon Systems Engineering (W Division)
• Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing by a team from various departments of the National Renewable Energy Laboratory
• Development of Mucoadhesive 3D-printed Carbopol/eudragit/snac Tablets for the Oral Delivery of Enoxaparin: in Vitro and Ex Vivo Evaluation by a team from School of Pharmacy, Aristotle University of Thessaloniki, Center for Interdisciplinary Research and Innovation (CIRI-AUTH), Thessaloniki, Department of Biological Applications and Technologies, University of Ioannina, School of Life and Health Sciences, University of Nicosia, International Hellenic University, and Department of Chemistry, University of Crete
• Printing Resolution Effect on Mechanical Properties of Porous Boehmite Direct Ink 3D Printed Structures by a team from Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur and Shell Technology Centre Bangalore
• Semi-solid Extrusion 3d Printing of Plant-origin Rosmarinic Acid Loaded in Aqueous Polyethylene Oxide Gels by a team from Institute of Pharmacy, University of Tartu, National University of Pharmacy, Kharkiv, Kyiv International University, and CurifyLabs Oy, Helsinki
• A High-Temperature Thermocouple Development by Additive Manufacturing: Tungsten-Nickel (W-Ni) and Molybdenum (Mo) Integration with Ceramic Structures by a team from Advanced Manufacturing Research Center, Youngstown State University
• The Influence of Heat Feedback and Thermal Conductivity on the Burn Rate of Thermite Composites by a team from University of California, Riverside
• Direct Ink Writing Of PVDF/PEG/CA Composite Based Water Treatment Membranes, a Master's thesis presented to Arizona State University
• On-demand Release of Fucoidan From 3d-printed Cardiac Scaffolds Based on Chitosan/silk Fibroin/polyaniline by a team from Center for Nanotechnology & Biomaterials Application and Research (NBUAM), Marmara University, Turkey and Department of Cell and Molecular Biology and Microbiology, Faculty of Biological Science and Technology, University of Isfahan, Isfahan, Iran
• Machine Learning–Enabled Direct Ink Writing of Conductive Polymer Composites for Enhanced Performance in Thermal Management and Current Protection by a team from multiple departments at both University of Georgia and Arizona State University
• Harnessing Fly Ash as Particle Reinforcement in Nature-Inspired Multilayer Composites by a team from Institute for Frontier Materials, Deakin University, Additive Manufacturing Laboratory, Department of Metallurgical and Materials Engineering, Defence Institute of Advanced Technology, India, and CIPET-Institute of Petrochemicals Technology, India
• Copper Nanoparticles Loaded Gelatin/ Polyvinyl Alcohol/ Guar Gum-based 3d Printable Multimaterial Hydrogel for Tissue Engineering Applications by a team from the Department of Mechanical Engineering, Indian Institute of Technology, Tirupati and the Department of Biotechnology, Sri Venkateswara Institute of Medical Sciences, Tirupati
• Field Testing of a Mixed Potential IoT Sensor Platform for Methane Quantification by a team from the University of New Mexico and SensorComm Technologies, Inc.
• German Chamomile (Matricaria chamomilla L.) Flowers Extract, Its Amino Acids Preparations and 3D-Printed Dosage Forms: Phytochemical, Pharmacological, Technological and Molecular Docking Study by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu,, National University of Pharmacy, Kharkiv, Ukraine, Institute of Pharmaceutical Technologies, Lithuanian University of Health Sciences, Kaunas, Life Chemicals Inc., Kyiv, Ukraine, and Zaporizhzhia State Medical and Pharmaceutical University, Zaporizhzhia, Ukraine
• Direct Ink Writing of Porous Shape Memory Polyesters by a team from Texas A&M University's departments of Department of Materials Science and Engineering, Biomedical Engineering, and [Chemistry https://www.chem.tamu.edu/]
• Synthesis and Characterization of SiO2 Nanoparticles Reinforced 3D Printable Gelatin/pva/guar Gum/ Hydroxypropyl Methylcellulose-based Biocomposite Hydrogel by a team from Department of Mechanical Engineering, Indian Institute of Technology, Tirupati
• The Effects of Shear Stress on the Micromechanical Properties of 3D Printable Biopolymer Nanocomposites Using a Custom-Designed Extrusion-Based 3D Printer by a team from University of Waterloo's departments of Systems Design Engineering and Department of Mechanical and Mechatronics Engineering
• Whey Protein-loaded 3d-printed Poly (Lactic) Acid Scaffolds for Wound Dressing Applications by a team from Marmara University, Turkey and University College, London
• Development of Inks with Fillers of NbS3 Quasi-One-Dimensional Charge-Density-Wave Material by a team from University of California, Los Angeles, University of Georgia, and Auburn University
• Dispersion and Stability Studies for Development of Ceramic Paste for Direct Ink Writing, a Master's thesis submitted to Pennsylvania State University's Department of Materials Science and Engineering
• Electrothermal Free-form Additive Manufacturing of Thermosets by a team from Texas A&M University's Department of Chemical Engineering and Department of Materials Science & Engineering, and from Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR)
• Ink-Based Additive Manufacturing of a Polymer/Coal Composite: A Non-Traditional Reinforcement by a team from Arizona State University, University of Georgia, and HESAM Universite, France
• Upflow Mitigation Strategy for Nested Printing by a team from the University of Florida's Departments of Mechanical and Aerospace Engineering and Industrial and Systems Engineering
• Enhancing Electrical Conductivity of Stretchable Liquid Metal–Silver Composites through Direct Ink Writing by a team from the Mechanical Engineering, Soft Materials and Structures Lab, Virginia Tech
• Design and in Vitro Evaluation of Curcumin-loaded Plga Nanoparticle Embedded Sodium Alginate/gelatin 3D Printed Scaffolds for Alzheimer's Disease by a team from Marmara University, University College London, Cube Incubation, Turkey, [Istanbul Kent University Istanbul Kent University], Cumhuriyet University, [University of Health Science and Pharmacy in St. Louis University of Health Science and Pharmacy in St. Louis], and University of Aveiro
• Rheological Properties of SiC Suspension for Direct Ink Writing by a team from Central South University, China
• Enhancing Extracellular Electron Transfer of a 3D-Printed Shewanella Bioanode with Riboflavin-Modified Carbon Black Bioink by a team from Zhejiang University, China
• Vapor-induced Phase-separation-enabled Versatile Direct Ink Writing by a team from University of Florida, University of South Carolina, and Zhejiang University, China
• 3D-Printed Photocatalytic Scaffolds of BiVO4 by Direct Ink Writing for Acetaminophen Mineralization by a team from Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey), Mexico, Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’. Advanced Functional Materials & Nanotechnology Group, and Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, San Nicolás de los Garza, Nuevo León, Mexico
• Fast and Slow-Twitch Actuation via Twisted Liquid Crystal Elastomer Fibers presented at the Gordon Research Conferences (GRC)
• The Effect of Triglycerol Diacrylate on the Printability and Properties of UV Curable, Bio-based Nanohydroxyapatite Composites by a team from the [ University of Waterloo, Canada]'s Composite Biomaterial Systems Laboratory and Material Interaction with Biological Systems Laboratory
• Eucalypt Extracts Prepared by a No-Waste Method and Their 3D-Printed Dosage Forms Show Antimicrobial and Anti-Inflammatory Activity by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia, Pharmacognosy Department, The National University of Pharmacy (Ukraine), I.Mechnikov Institute of Microbiology and Immunology, National Academy of Medical Sciences of Ukraine, Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Estonia, and Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital, Estonia
• 3D Printing by Stereolithography Using Thermal Initiators by a team from the Institute of Chemistry, Hebrew University of Jerusalem
• Three-dimensional Printing of Wood by a team from Oak Ridge National Laboratory
• Additively Manufactured Silicone Polymer Composite with High Hydrogen Getter Content and Hydrogen Absorption Capacity by a team from Los Alamos National Laboratory's Chemical Diagnostics and Engineering Group and Fabrication Manufacturing Science Group
• Modulating the 3D Printability of Vitamin D3-nanoemulsion-based Dairy Gels: Influence of Emulsifier on Gel Structure, Printing Behaviour and Vitamin D3 Retention by a team from the Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi and School of Agriculture and Food Sciences, The University of Queensland
• The Eucalypt Extracts Prepared by a Non-wasting Method and Their 3D-Printed Dosage Forms With an Antimicrobial and Anti-inflammatory Activity by a team from the Institute of Pharmacy, Faculty of Medicine, University of Tartu, the Pharmacognosy department, The National University of Pharmacy, Ukraine, the I. Mechnikov Institute of Microbiology and Immunology. National Academy of Medical Sciences of Ukraine, the Department of Microbiology, Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, and the Laboratory of Clinical Microbiology, United Laboratories, Tartu University Hospital
• High-Throughput Ammonia Production from Nitrate Using Liquid Metal Synthesized Bismuth Nano-Catalyst by a team from the Centre de Recherche Paul Pascal−CNRS, University of Bordeaux, School of Chemical and Biomolecular Engineering, The University of Sydney, and the Schools of Chemical Engineering and Biomedical Engineering of the University of New South Wales (UNSW)
• Boron-polymer Composites Engineered for Compression Molding, Foaming, and Additive Manufacturing by a team from Los Alamos National Laboratory
• Design and Customization of 3D Printers for Advanced Materials Printing, a Master's Thesis submitted to the University of Texas at El Paso
• Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor by a team from the Technical University of Darmstadt
• Influence of Starch-protein Interactions on the Digestibility and Chemical Properties of a 3D-printed Food Matrix Based on Salmon by-product Proteins by a team from the Universidad del Bío-Bío, Chile
• Designing Advanced Hydrogel Inks With Direct Ink Writing Based 3d Printability for Engineered Biostructures by a team from School of Chemical Sciences, Indian Institute of Technology Mandi and School of Chemical Engineering, Yeungnam University

Top

DIW/SEP/SSE, 2023

• Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing by a team from Brown University, Virginia Tech, and University of Nebraska–Lincoln
• Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs by a team from the University of South Carolina's Department of Chemical Engineering and Biomedical Engineering Program and from TA Instruments
• Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique by a team from the Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad
• Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks by a team from several departments of Eindhoven University of Technology
• Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation by a team from Texas A&M University and the NASA Glenn Research Center
• Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing by a team from several departments of Virginia Tech, Brown University, and University of Nebraska–Lincoln
• Development of 3d Printing Techniques for Solid-state Lithium Batteries by a team from Lawrence Livermore National Laboratory
• Processing of Bioceramics by Additive Manufacturing, affiliation unknown
• Semisolid Extrusion Printing and 3D Bioprinting by a team from College of Pharmacy, The University of Texas at Austin and School of Pharmacy, University of Mississippi
• Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size by a team from the University of South Carolina
• DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components by a team from Loughborough University, UK
• Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures by a team from Texas A&M University
• Peritoneal Implants and Drug Delivery by a team from several departments of Government College University, Faisalabad, Pakistan, Government College University, Lahore, Pakistan, and University of Lahore, Lahore, Pakistan
• A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles by a team from the University of Florence and the Université de Strasbourg, France
• Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing by a team from Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR) and from Texas A&M University's departments of Chemical Engineering and Materials Science & Engineering
• Multimaterial Hydrogel 3D Printing by a team from School of Chemical Sciences The University of Auckland
• Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement by a team from several departments of Marmara University, Istanbul
• Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach by a team from the Department of Mechanical Engineering, Indian Institute of Technology Tirupati
• Ultrasensitive and Robust Mechanoluminescent Living Composites by a team from multiple departments of the University of California, San Diego and from the Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam
• Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures by a team from the NASA Marshall Space Flight Center and Georgia Tech's School of Chemical and Biomolecular Engineering and School of Mechanical Engineering
• 3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective by a team from Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST) and several departments at King Abdullah University of Science and Technology
• Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers by a team from the School of Materials Science and Engineering, Henan University of Technology
• 3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications by a team from several locations of the Indian Institutes of Technology and from Morgan Advanced Materials, State College, PA
• 3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering by a team from The University of Tennessee, Knoxville, TN and North Dakota State University, Fargo, ND
• Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites, a PhD thesis submitted to Rice University
• Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence by a team from the US Air Force Research Laboratory
• Polymer/Coal Composites from Ink-based Additive Manufacturing, a Masters thesis submitted to Arizona State University
• A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries by a team from Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory, Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, and Department of Mechanical and Aerospace Engineering, Case Western Reserve University
• Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, The National University of Pharmacy, Kharkiv, Ukraine, CurifyLabs, and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine
• Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training by a team from College of Mechanical Engineering, Zhejiang University of Technology, Department of Mechanical Engineering, University of Colorado Boulder, and College of Information Engineering, Zhejiang University of Technology
• Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets by a team from the Universidad del Bío-Bío, Chile and Universidad de Santiago de Chile
• On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints by a team from Department of Coatings and Polymeric Materials, North Dakota State University, Fargo, Department of Macromolecular Sciences and Engineering, Case Western Reserve University, Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory, and multiple departments of University of Tennessee, Knoxville
• Carbon Scaffold Architectures for Stable Lithium Metal Anodes, a paper from Lawrence Livermore National Laboratory
• Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of Texas A&M University
• Drug Delivery and Testing via 3D Printing by a team from the College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak and Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak
• On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW) by a team from the University of Tennessee, Knoxville, Case Western Reserve University, Novagard Solutions, and the Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory
• Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts by a team from Duy Tan University, Vietman, Nanyang Technological University, Singapore, The Hebrew University of Jerusalem, Jerusalem , Israel, and City University of Hong Kong, China
• D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results by a team from Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul, Marmara University, Istanbul University-Cerrahpasa, Halic University, Koç University, Goztepe Prof. Dr. Suleyman Yalcin City Hospital, and Istanbul Arel University, all in Turkey
• 3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom by a team from multiple departments of the Medical University of Varna, Bulgaria
• PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing by a team from University of the Philippines Diliman, University of Tennessee, Knoxville, Case Western Reserve University, North Dakota State University, and Oak Ridge National Laboratory
• Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives by a team from TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India and Orthopaedics and Musculoskeletal Sciences, Univeristy College, London
• Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, The National University of Pharmacy, Ukraine, and Curify Labs, Finland
• Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth by a team from Purdue University
• Shape Memory Soft Robotics with Yield Stress Fluids by a team from the University of Amsterdam and the Eindhoven University of Technology (TU Eindhoven)
• Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics by a team from the Department of Mechanical Engineering and the Human Computer Interaction Institute of Carnegie Mellon University, and from the Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra
• Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering by a team from the Department of Mechanical Engineering, the Department of Computer Science, the School of Biomedical Engineering and the Department of Mathematics of Colorado State University
• In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds by a team from the Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University, the BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles, the College of Life Sciences, Xinyang Normal University (XYNU), and the Center for Nanotechnology and Biomaterials Application & Research (NBUAM), Department of Metallurgical and Materials Engineering, and Faculty of Pharmacy of Marmara University
• Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing by a team from Universidad del Bío-Bío and Universidad de Chile
• EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces by a team from different departments of Carnegie Mellon University
• Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor by a team from Los Alamos National Laboratory and The University of Texas at El Paso
• 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering by a team from the Indian Institute of Technology (IIT) Hyderabad,'s Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering and Department of Materials Science and Metallurgical Engineering, as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy
• Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling by a team from Carnegie Mellon University's Department of Mechanical Engineering and Human-Computer Interaction Institute and the Mechanical and Industrial Engineering Department, University of Massachusetts
• A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines by a team from SENAI CIMATEC University Center, Brazil
• Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications by a team from the Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon and TESCA-Group
• 2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology by a team from the Department of Chemical Engineering, Tennessee Technical University
• 3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones by a team from various departments of the Kharagpur, Gandhinagar, and Varanasi (BHU) campuses of the Indian Institutes of Technology
• Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials by a team from Department of Chemical Engineering, Tennessee Tech University
• 3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment by a team from Arizona State University's The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering, Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE), andThe School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering; from The Mayo Clinic's Arizona departments of Department of Immunology, Head and Neck Regenerative Medicine Laboratory, Department of Medical and Surgical Gynecology, and Division of Laryngology, Department of Otolaryngology; and the Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University
• Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials by a team from the following organizations: Department of Macromolecular Sciences and Engineering, Case Western Reserve University, Novagard Solutions, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey), Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville, Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville, Department of Coatings and Polymeric Materials, North Dakota State University, and Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory
• Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications by a team from the International Hellenic University and the Centre for Research and Technology Hellas (CERTH)
• A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract by a team primarily from Marmara University
• 3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers by a team from the INSA-Lyon and Thales Research & Technology
• Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays by a team from the Department of Physics, Yale University and the Center for MicroEngineered Materials, University of New Mexico
• Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide by a team from the Indian Institute of Technology's Kharagpur, (BHU) Varanasi, and Gandhinagar campuses, and well as the Vikram Sarabhai Space Centre
• Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites, a Master's thesis submitted to the Department of Mechanical Engineering, University of Texas at El Paso
• Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures by a team from Materials and Manufacturing Directorate, Air Force Research Laboratory, National Research Council Research Associate Program, UES, Inc., Strategic Ohio Council for Higher Education, and General Electric Research
• Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures by a team from the Department of Mechanical Engineering of the University of Maryland
• Nanomechanical Characterization of 3D Printed Cement Pastes by a team from Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering and Department of Civil and Environment Engineering
• Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks by a team from the Department of Chemistry, University of Washington and the Department of Chemistry, Columbia University

Top

DIW/SEP/SSE, 2022

• Halloysite Reinforced 3D-printable Geopolymers by a team from The Technical University of Denmark's Departments of Civil & Mechanical Engineering, Physics, Heath Technology, and Nanolab, as well as the Department of Civil and Environmental Engineering, Imperial College London
• Direct Ink Write 3D printing of Wave Propagation Sensor by a team from Los Alamos National Laboratory and from [http://utep.edu The University of Texas at El Paso
• 3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials by a team from the Chemistry Division, U.S. Naval Research Laboratory
• MultimodalIimaging Compatible Micro-Physiological System by a team from Department of Radiology, Texas Children's Hospital and Baylor College of Medicine's Departments of Radiology and Pediatrics-Oncology
• Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials by a team from Purdue University's School of Engineering Technology, School of Materials Engineering, and School of Industrial Engineering,
• Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups by a team from Laboratoire de Génie Electrique, INSA Lyon and Hybria Institute of Business and Technologies, Écully Campus
• Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors by a team from Georgia Tech's School of Materials Science and Engineering and Department of Biomedical Engineering
• 3D-Printed PDMS-based Membranes for CO₂ Separation Applications by a team from Oak Ridge National Labratory's Center for Nanophase Materials and Sciences and Chemical Sciences Division, the Department of Macromolecular Sciences and Engineering, Case Western Reserve University, the Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park, the Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines, the Department of Coatings and Polymeric Materials, North Dakota State University, and University of Tennessee, Knoxville's Department of Chemical and Biomolecular Engineering and Department of Chemistry
• Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures, by Lawrence Livermore National Laboratory
• Controlled Release of Metformin-Loaded SA/PEG Scaffolds produced by 3D-Printing Technology], published by Yildiz Technical University Press
• Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting by a team from the University of Liège
• Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the Singapore University of Technology and Design
• Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators by a team from Singapore University of Technology and Design
• Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, Texas A&M University
• Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing by a team from The Artie McFerrin Department of Chemical Engineering, Texas A&M University, the Department of Materials Science and Engineering, Texas A&M University, the Chemical Engineering Department, Bolu Abant Izzet Baysal University, and the Singapore Institute of Manufacturing Technology (SIMTech)
• 3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering by a team from Marama University's Center for Nanotechnology & Biomaterials Application and Research (NBUAM), Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences, Department of Biochemistry, Faculty of Medicine, Department of Medical Microbiology, Faculty of Medicine, and from University Politehnica of Bucharest's Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science, National Centre for Micro- and Nanomaterials, National Centre for Food Safety, and Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science
• Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements, a PhD dissertation submitted to the Materials Science and Engineering Department of Binghamton University, State University of New York
• Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles by a team from the Georgia Tech School of Chemical & Biomolecular Engineering
• Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds by a team from CIMAV - Subsede Monterrey and Chihuahua and Universidad Autónoma de Nuevo León
• Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials by a team from Georgia Southern University
• A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics by a team from the Department of Mechanical Engineering, Carnegie Mellon University and the Department of Electrical Engineering, University of Coimbra
• Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates by a team from the Department of Chemical Engineering and the Biomedical Engineering Program of the University of South Carolina
• Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors by a team from the School of Engineering Technology, Purdue University
• Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications by a team from the National University of Singapore
• Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments by a team primarily from the Lyles School of Civil Engineering, Purdue University
• 3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes by a team from the University of Tennessee, Knoxville
• 3D Printable Ceramic Pastes Design: Correlating Rheology & Printability by a team from Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey) and Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua) in Mexico
• 2D Stationary Computational Printing of Cement-based Pastes by a team from the Department of Chemical Engineering, Tennessee Technological University
• Investigation of 3D-printed Chitosan-Xanthan Gum Patches by a team from ten universities from Turkey, Poland, India, and the UK.
• Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors, a thesis presented to Georgia Tech School of Materials Science and Engineering
• Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study by a team from the Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory, the Future Convergence Technology Research Institute, Gyeongsang National University, and the Korean Institute of Science and Technology
• Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability by a team from the Departments of Chemical and Biomolecular Engineering, Materials Science and Engineering, and Chemistry of the University of California, Irvine
• Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS₂ Ink by a team from the Department of Chemistry, University of Georgia and the Departments of Electrical and Computer Engineering and Chemical and Environmental Engineering of the University of California, Riverside
• Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials, by a team from the US National Institute of Science and Technology (NIST) and the Departments of Chemical Engineering and Electrical and Computer Engineering of Tennessee Technological University
• Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity, by a team from the Schools of Advanced Materials Discovery and Biomedical Engineering from Colorado State University
• UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions by a team from the Materials and Manufacturing Directorate, US Air Force Research Laboratory
• Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review by a team from Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester
• The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms by Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University
• Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening by a team from the Department of Mechanical Engineering and Department of Civil and Environmental Engineering of the Massachusetts Institute of Technology (MIT)
• Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective by a team from the School of Pharmacy, Faculty of Medicine and Health, University of Sydney, Procter & Gamble, and Department of Mathematical Sciences, Florida Institute of Technology
• Wood Warping Composite by 3D Printing by a team from the Hebrew University of Jerusalem
• Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels by a team from Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN), The Hamburg Centre for Ultrafast Imaging, Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY, Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY, and Institute of Inorganic and Applied Chemistry, University of Hamburg
• High-Temperature Interactions of Metal Oxides and a PVDF Binder by a team from University of Maryland, College Park
• 3D Printing of Ecologically Active Soil Structures by a team from the University of Virginia
• In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics by a team from Marmara University
• Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer by a team from University of California, San Diego
• Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration by a team from Carnegie Mellon University, the Hebrew University of Jerusalem, and Bezalel Academy of Art and Design
• Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation by a tem from the University of California, Riverside, Georgia Tech, and the University of Maryland
• Processing of Preceramic Polymers for Direct-Ink Writing, a PhD dissertation submitted to University of Tennessee, Knoxville
• Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers, by a team from the Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside, the Department of Chemical and Environmental Engineering, University of California, Riverside, and the Department of Chemistry, University of Georgia
• Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine, a PhD dissertation submitted to Northeastern University's Department of Chemical Engineering

Top

DIW/SEP/SSE, 2021

• Rheological Characterization of 3D Printable Geopolymers by a team from several departments of the Technical University of Denmark, Civil and Environmental Engineering, Imperial College London, and Dentistry - Regenerative Biomaterials, Radboud Institute for Molecular Life Sciences, Radboud University Medical Center, the Netherlands
• Anisotropic Iridescence and Polarization Patterns in a Direct Ink Written Chiral Photonic Polymer by a team from Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e) and T&I, SABIC, both in The Netherlands.
• Direct Ink Write Multi-Material Printing of PDMS-BTO Composites with MWCNT Electrodes for Flexible Force Sensors by a team from the University of Texas at El Paso and the U.S. Department of Energy's Kansas City National Security Campus
• Printed Copper-Nanoplate Conductor for Electro-Magnetic Interference by a team from several departments of the State University of New York at Buffalo
• Patterned Actuators via Direct Ink Writing of Liquid Crystals by a team from the Laboratory for Stimuli-responsive Functional Materials & Devices of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology and the Center for Responsive Soft Matter, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai
• Valorization of Salmon Industry By-Products: Evaluation of Salmon Skin Gelatin as a Biomaterial suitable for 3D Food Printing by a team from Food Engineering Department, Universidad del Bío-Bío and Department of Food Science and Chemical Technology, Faculty of Chemical Sciences and Pharmacy, Universidad de Chile
• 3D Printing of Transparent Silicone Elastomers by a team from Lawrence Livermore National Laboratory
• Effects of Transglutaminase Cross-Linking Process on Printability of Gelatin Microgel-Gelatin Solution Composite Bioink by a team from the University of Florida
• 3D Printing of Osage Orange Extract/Chitosan Scaffolds for Soft Tissue Engineering by a team from Marmara University and Yildiz Technical University
• Factors Affecting Substrate Heating with Printed Thermites from Dr. Matthew Ervin, US Army Research Laboratory
• Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets by a team from the University of Tartu and the University of Helsinki
• Long-term Stabilized Amorphous Calcium Carbonate—an Ink for Bio-inspired 3D Printing by a team from the Bio-Inspired Surface Engineering and Biomineralization Lab of Technion University
• Direct Ink Write 3D Printing of High Solids Loading Bimodal Distributions of Particles by a team from Georgia Tech's schools of School of Material Science and Engineering and School of Chemical and Biomolecular Engineering
• Additively Manufactured Dielectric Elastomer Actuators: Development and Performance Enhancement Development and Performance, a thesis submitted for a PhD in Aerospace Engineering at Embry-Riddle Aeronautical University
• 3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure by a team primarily from Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne
• Printable, cCastable, Nanocrystalline cCellulose-epoxy Composites Exhibiting Hierarchical Nacre-like Toughening by a team from Department of Mechanical Engineering, Massachusetts Institute of Technolog, Centre de Recherche Paul Pascal, CNRS, and MultiScale Material Science for Energy and Environment, CNRS-MIT
• 3D-Printed Electroactive Polymer Force-Actuator for Large and High Precise Optical Mirror Applications by a team primarily from INSA-Lyon, France
• Properties Regulation and Biological Applications of Decellularized Peripheral Nerve Matrix Hydrogel by a team from Sun Yat-sen University, Guangzhou, China
• Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers by a team from Purdue University and University of Texas, San Antonio
• Additively Manufactured Reactive Material Architectures For Exothermic Brazing by a team from Vanderbilt University's School of Engineering
• Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials by a team from various departments of the College of Engineering, Texas A&M University
• The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2 by a team from the Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines and Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville
• Sociotechnical Alignment in Biomedicine: The 3D Bioprinting Market beyond Technology Convergence by a team from University College London and University of Sussex
• Charge Transport in Electronic Devices Printed with Inks of Quasi-1D van der Waals Materials, by a team from University of California, Riverside and University of Nebraska, Lincoln
• Characterize Traction–separation Relation and Interfacial Imperfections by Data-driven Machine Learning Models by a team from Oak Ridge National Laboratory and the University of North Texas
• Rapid Heating and Chemical Speciation Characterization for Combustion Performance Analysis of Metallized, Nanoscale Thermites and Pvdfbound Solid Propellant Compositions, a PhD dissertation presented to the University of Maryland Department of Chemistry and Biochemistry
• Highly Recyclable, Mechanically Isotropic and Healable 3D-Printed Elastomers via Polyurea Vitrimers by a team from Oak Ridge National Laboratory's Chemical Sciences Division and Center for Nanophase Materials Sciences, and the Department of Chemical and Biomolecular Engineering of the University of Tennessee
• Extent of UV Curing in Highly Loaded Systems for Direct Ink Writing, an undergraduate paper submitted to Georgia Tech
• The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review by a team from Shenzhen University
• Effect of Operator Experience on Ability to Place Sequential, 2-mm-thick Increments of Composite by a team from the Department of Restorative Sciences, Dental College of Georgia at Augusta University
• Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures by a team from University of New South Wales, Leibniz Universität, Hannover, Monash University, RMIT University, Shinshu University, Tokida, and Centre de Recherche Paul Pascal−CNRS, University of Bordeaux
• 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect by a team from University of Lyon, INSA-Lyon, France
• Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding by a team from Los Alamos National Laboratory, US Department of Energy's Kansas City National Security Campus, and Korea Institute of Science and Technology
• Persistent Polyamorphism in the Chiton Tooth: From a new Biomineral to Inks for Additive Manufacturing by a team from Materials Science and Engineering, Northwestern University and Advanced Photon Source, Sector 3, Argonne National Laboratory
• Direct Ink Writing of ZrB2-SiC Chopped Fiber Ceramic Composites by a team from the University of Tennessee, Knoxville, Georgia Institute of Technology, and Air Force Research Laboratory
• 3D Printing of Spent Coffee Ground Derived Biochar Reinforced Epoxy Composites by a team from Tuskegee University
• 3D Printing of Cellulose Nanocrystal-Loaded Hydrogels through Rapid Fixation by Photopolymerization by a team from the Hebrew University of Jerusalem and Politecnico di Torino
• Additive Manufacturing of Hetero-Magnetic Coupled Inductors by a team from Virginia Polytechnic Institute and State University
• On the Additive Manufacturing (3D Printing) of Viscoelastic Materials and Flow Behavior: From Composites to Food Manufacturing by a team from Case Western Reserve University, University of San Carlos, Philippines, Adamson University, Philippines, University of Tennessee, Knoxville, and Oak Ridge National Laboratory
• Recent trends in Natural Polysaccharide based Bioinks for Multiscale 3D Printing in Tissue Regeneration: A Review by a team from Tissue Engineering Laboratory, PSG Institute of Advanced Studies, Department of Polymer Science and Technology, Council of Scientific and Industrial Research - Central Leather Research Institute, and Biomaterial Surface Micro/Nanoengineering Laboratory, Colorado State University
• 3D Printable Magnesium-based Cements Towards the Preparation of Bioceramics by a team from Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy
• Carbohydrate Binding Module-Fused Antibodies Improve the Performance of Cellulose-Based Lateral Flow Immunoassays by a team including members from several laboratories and departments of the Technical University of Darmstadt and the Department of Biotechnology, Technical University of Braunschweig
• Thermal Energy Regulation with 3D Printed Polymer-Phase Change Material Composites by a team from the Department of Materials Science and Engineering, Texas A&M University and Department of Chemistry, Texas A&M University
• Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink by a team from the Department of Mechanical and Aerospace Engineering, University of Florida and the School of Mechanical Engineering, Zhejiang University
• Recent Advances in 3D Printed Wound Dressings by a team from the University of Indonesia
• Multifunctional Reactive Nanocomposites via Direct Ink Writing by a team from Johns Hopkins University's Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as The Charles Stark Draper Laboratory, Inc.
• Direct Ink Writing of Recyclable and in situ Repairable Photothermal Polyurethane for Sustainable 3D Printing Development by a team with members from several departments from The University of Western Ontario, as well as from the School of Mechatronic Engineering and Automation, Shanghai University
• Photopolymerizable Pullulan: Synthesis, Self-Assembly and Inkjet Printing by a team from CSGI & Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze, Italy
• Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities by a team from Department of Mechanical Engineering, University of Maryland, College Park
• Moisture Sensitivity and Compressive Performance of 3D-Printed Cellulose-Biopolyester Foam Lattices by a team from School of Engineering, The University of Waikato, Centre for Advanced Composite Materials, The University of Auckland, and School of Design Innovation, Victoria University Wellington
• A Dual-Ink 3D Printing Strategy to Engineer Pre-Vascularized Bone Scaffolds In-Vitro by a team from several departments of the Oregon Health and Science University and the University of Geneva, University Clinic of Dental Medicine
• Niche-guided Tissue Patterning by Chemomechanical Flow Lithography, by a team from ARC Training Centre for Innovative BioEngineering, Embryology Unit, Children's Medical Research Institute, Sydney, School of Medical Science, Faculty of Medicine and Health, The University of Sydney, EMBL Australia, Single Molecule Science Node, School of Medical Sciences, UNSW, Sydney, and Department of Pharmacologyand Regenerative Medicine; Department of Bioengineering, University of Illinois at Chicago, Illinois
• Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications by a team from Engineering and Natural Sciences, Bahcesehir University and Maritime Higher Vocational School, Piri Reis University
• Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials, by a team from the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo
• Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions by a team from the University of New South Wales's Centre for Nanomedicine, School of Materials Science and Engineering, and School of Aerospace, Mechanical and Mechatronic Engineering

Top