Materials
Revision as of 20:49, 4 February 2014 by Davo (talk | contribs) (Davo moved page Materials2 to Materials without leaving a redirect)
Materials Printable one Hyrel Machines
The following is a list of materials with which the Hyrel machines can print:
| Material | Extruder | HotHead (°C) | Fan Speed | HotBed (°C) | Verified? |
|---|---|---|---|---|---|
| ABS | MK-1 | ~225 | 30% | 60 | yes |
| PLA | MK-1 | ~225 | 30% | 60 | yes |
| PlastInk Rubber | MK-1 | ~225 | 30% | 60 | yes |
| NinjaFlex | MK-1 | ~225 | 30% | 60 | yes |
| Nylon | MK-1 | ~225 | 30% | 60 | yes |
| T-Glaze | MK-1 | ~225 | 30% | 60 | yes |
| BendLay | MK-1 | ~225 | 30% | 60 | no |
| LayBrick | MK-1 | ~225 | 30% | 60 | no |
| LayWoo-d3 | MK-1 | ~225 | 30% | 60 | no |
| PET | MK-1 | ~225 | 30% | 60 | no |
| PVA | MK-1 | ~225 | 30% | 60 | no |
| Clay | EMO-25 | n/a | n/a | n/a | yes |
| Metal Clay, including Precious Metal Clay (PMC) | EMO-25 | n/a | n/a | n/a | yes |
| Porcelain | EMO-25 | n/a | n/a | n/a | yes |
| Plasticine | EMO-25 | n/a | n/a | n/a | yes |
| Plah-Doh | EMO-25 | n/a | n/a | n/a | yes |
| Sugru | EMO-25 | n/a | n/a | n/a | yes |
| RTV Silicone | EMO-25 | n/a | n/a | n/a | yes |
| GoodFilla | EMO-25 | n/a | n/a | n/a | no |
