2 Install

Here are instructions for uploading the latest Repetrel software and associated applications (EcoSystem Apps):

Repetrel & Firmware - Version 2.855 as of 19 Apr 2016

The Repetrel download will install the Repetrel software (release 2.855) as well as the firmware for your 407 Motion Controller and your 103 Print Head and Hot Bed Controllers. This install must be carried out per the instructions below, so that Repetrel and its dependent resources will be found in the expected locations.

A video giving a quick overview is available at: https://youtu.be/VMyS3h4qiSA

A video showing the actual upgrade process is available at: https://www.youtube.com/watch?v=n4QwiuQtjO0

Installing Repetrel

1. Download http://hyrel3d.net/downloads/repetrel/repetrel_2.855.rar (as of 16 Nov 1015). This contains:
   1. Repetrel 2.828
   2. 407 Motion Controller firmware 2.409
   3. 103 PH/HB Controller firmware (see next table)
2. Extract the contents
3. Rename previous C:/repetrel to C:/repetrel.old (or similar)
4. Move your extracted repetrel directory to C:/repetrel

Software upgrade complete. Occasionally a user will have to point existing shortcuts to the new executible, C:/repetrel/bin/repetrel.exe

Click here to watch a video of the software upgrade process.

Click here to watch a video of the 407 Motion Controller Firmware upgrade process.

Click here to watch a video of the 103 HotHead/HotBed Controller Firmware upgrade process.

Flashing Firmware

New software will often require new firmware. The latest firmware as of April 2016 is included in the above Repetrel release.

Video instructions for flashing the 103 (HH/HB) Controllers: https://youtu.be/yM8QMZBTb4o

Video instructions for flashing the 407 Motion Controller: https://youtu.be/cFAFRkpLmww

Firmware Versions

The following chart will help you determine which version of the 103 firmware you will need:

Current PrintHead and HotBed Controller Firmware Versions

Controller	Standard		Legacy
	File Name	swVersion	File Name	swVersion
HotBed MK1-250 Quiet Storm	OLD_NOJUMPERS_232A.hex	232A	OLD_JUMPERS_232J.hex	232J
Spindle Tool Laser Tool	FILAMENTS_33A.hex	33A	OLD_NOJUMPERS_232A.hex	232A
MK1-450 MK1-250 MK2-250	FILAMENTS_33A.hex	33A	OLD_NOJUMPERS_232A.hex	232A
EMO, COD VOL, VCD KRA, KCD SDS, CSD	EMULSIFIABLES_33V.hex	33V	OLD_NOJUMPERS_232A.hex	232A

To determine if you require firmware for new, sliver RTDs or older, red RTDs, consult these images:

To determine if you require firmware for legacy 103 boards, consult these images; note that accessories with RED RTDs will take firmware versions *32 or *232, and accessories with SILVER RTDs will take firmware versions *33 or or above (accessories without temperature control may take either, but we recommend the latest versions in this case):

Please note that the legacy boards with jumpers have not shipped since mid 2014, so most people will never encounter them.

EcoSystem Apps

EcoSystem Apps is a suite of publicly available programs which add many features at no cost. Some of them you might use individually to create or modify models. Others might be called from Repetrel to manipulate a file. This install should all be carried out per the instructions below, so that Repetrel will find them in the expected locations.

Installing EcoSystem Apps

1. Download http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe - see table below for the list of programs and their proper locations.
2. Run the executable, with the location pointed to C:
3. Launch Repetrel, go to the Programs tab, and double click in each text field, pointing the applications to their respective executable files under C:/EcosystemApps. See the table below for the proper locations. Note the new location for the Slic3r install; Slic3r Recipes (or Slic3r CFG files) should still be under C:\Users\Hyrel\AppData\Roaming\Slic3r.

EcosystemApps Locations

Program Name	Executable Location
Slic3r EXE	C:\EcosystemApps\Slic3r\slic3r.exe
Slic3r CFG	C:\Users\Hyrel\AppData\Roaming\Slic3r
OpenSCAD	C:\EcosystemApps\OpenSCAD\openscad.exe
FreeCAD	C:\EcosystemApps\FreeCAD 0.15\bin\FreeCAD.exe
MeshLab	C:\EcosystemApps\VCG\MeshLab\meshlab_32.exe
FlatCAM	C:\EcosystemApps\FlatCAM\FlatCAM.exe
QCAD	C:\EcosystemApps\QCAD\qcad.exe
TeamViewer	C:\EcosystemApps\TeamViewer\Version9\TeamViewer.exe
InkScape	C:\EcosystemApps\inkscape\inkscape.exe
GIMP	C:\EcosystemApps\GIMP 2\bin\gimp-2.8.exe

Air Filter Bracket

Customer exforma23 has made this file available for users to mount their air filters. Thanks exforma23!