Difference between revisions of "Filaments"
(Created page with "Settings for the MK1-250: ; Material : '''ABS''' : '''(any)''' Color : '''0.500''' mm Nozzle : '''(any)''' Layer Z (will be overwritten with gcode value) ; Temp Info : '''240...") |
|||
| Line 1: | Line 1: | ||
| + | [[Category:Settings]] | ||
| + | {| align="right" | ||
| + | | __TOC__ | ||
| + | |} | ||
| + | |||
Settings for the MK1-250: | Settings for the MK1-250: | ||
Revision as of 12:44, 8 December 2015
Settings for the MK1-250:
- Material
- ABS
- (any) Color
- 0.500 mm Nozzle
- (any) Layer Z (will be overwritten with gcode value)
- Temp Info
- 240 Print Temperature
- 100 Pwr Factor
- (any) Min
- (any) Max
- OverRides
- 0.780 Pulses
- 1.000 Feed Rate %
- Prime
- 250 Steps
- 10,000 Rate
- 50 ms Dwell Time
- 1 Prime After Tool Change
- Unprime
- 250 Steps
- 10,000 Rate
- 60 ms Dwell Time
- 1 Unprime Before Tool Change
- Offsets
- OFF Clone Head
- 0.000 X
- 0.000 Y
- 0.000 Z
- Head Info
- MK1 Model
- 1 Meg RTD Type
- High Motor Current
- Sixteenth Step Mode
