Difference between revisions of "Filaments"
| Line 5: | Line 5: | ||
| __TOC__ | | __TOC__ | ||
|} | |} | ||
| + | |||
| + | Some settings for the MK1-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (0.5mm is default) AND what path width you sliced for. Having said that, here are our default shipping settings: | ||
{| class="wikitable" style="text-align: center;" | {| class="wikitable" style="text-align: center;" | ||
Revision as of 13:36, 8 December 2015
Some settings for the MK1-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (0.5mm is default) AND what path width you sliced for. Having said that, here are our default shipping settings:
| Settings: | MK1-250: | MK1-350/400: |
|---|---|---|
| Material | ||
| Type | (any) | (any) |
| Color | (any) | (any) |
| Nozzle | 0.500 | 0.500 |
| Layer | (any) | (any) |
| Temp Info | ||
| Print Temp | 240 | 410 |
| Power Factor | 100 | 100 |
| Minimum | (any) | (any) |
| Maximum | (any) | (any) |
| Overrides | ||
| Pulses | 0.78 | 0.78 |
| Feed Rate % | 1.000 | 1.000 |
| Prime | ||
| Steps | 250 | 250 |
| Rate | 10,000 | 10,000 |
| Dwell Time (ms) | 50 | 50 |
| Before Tool Change | 1 | 1 |
| Unprime | ||
| Steps | 250 | 250 |
| Rate | 10,000 | 10,000 |
| Dwell Time (ms) | 60 | 60 |
| After Tool Change | 1 | 1 |
| Offsets | ||
| Clone Head | Off | Off |
| X | 0,000 | 0,000 |
| Y | 0,000 | 0,000 |
| Z | 0,000 | 0,000 |
| Head Info | ||
| Model | 250 | 250 |
| RTD Type | 1 Meg | 1 Meg |
| Motor Current | High | High |
| Step Mode | Sixteenth | Sixteenth |
