Filaments
Settings for the MK1-250:
- Material
- ABS
- (any) Color
- 0.500 mm Nozzle
- (any) Layer Z (will be overwritten with gcode value)
- Temp Info
- 240 Print Temperature
- 100 Pwr Factor
- (any) Min
- (any) Max
- OverRides
- 0.780 Pulses
- 1.000 Feed Rate %
- Prime
- 250 Steps
- 10,000 Rate
- 50 ms Dwell Time
- 1 Prime After Tool Change
- Unprime
- 250 Steps
- 10,000 Rate
- 60 ms Dwell Time
- 1 Unprime Before Tool Change
- Offsets
- OFF Clone Head
- 0.000 X
- 0.000 Y
- 0.000 Z
- Head Info
- MK1 Model
- 1 Meg RTD Type
- High Motor Current
- Sixteenth Step Mode
