Difference between revisions of "Test4"
(→5 Flow) |
(→6 Position) |
||
Line 161: | Line 161: | ||
! Brief Description | ! Brief Description | ||
|- | |- | ||
− | ! [[# | + | ! [[#G20_Set_Units_to_Inches|G20]] |
− | | Yes || | + | | Yes || Set Units to Inches |
+ | |- | ||
+ | ! [[#G21_Set_Units_to_Milimeters|G21]] | ||
+ | | Yes || Set Units to Milimeters | ||
+ | |- | ||
+ | ! [[#G28_Send_X,_Y_to_Physical_Home|G28]] | ||
+ | | Yes || Send X, Y to Physical Home | ||
+ | |- | ||
+ | ! [[#G53_Clear_Offsets|G53]] | ||
+ | | Yes || Clear Offsets | ||
+ | |- | ||
+ | ! [[#G54_-_G59_-_Set_Offsets|G54-59]] | ||
+ | | Yes || Set Offsets | ||
+ | |- | ||
+ | ! [[#G90_Absolute_Positioning|G90]] | ||
+ | | Yes || Absolute Positioning | ||
+ | |- | ||
+ | ! [[#G91_Relatative_Positioning|G91]] | ||
+ | | Yes || Relatative Positioning | ||
+ | |- | ||
+ | ! [[#G92_Reset_Coordinate_Offsets|G92]] | ||
+ | | Yes || Reset Coordinates | ||
+ | |- | ||
+ | ! [[#G93_Clear_Coordinate_Offsets|G93]] | ||
+ | | Yes || Reset Coordinates | ||
+ | |- | ||
+ | ! [[#M6_Declare_Head_Offsets|M6]] | ||
+ | | Yes || Declare Head Offsets | ||
+ | |- | ||
+ | ! [[#M660_Assign_Tool_Height_Offset|M660]] | ||
+ | | Yes || Set Tool Offsets | ||
+ | |- | ||
+ | ! [[#M702_-_M704_Cloning_Heads|M702-4]] | ||
+ | | Yes || Cloning Heads | ||
|- | |- | ||
|} | |} |
Revision as of 17:09, 21 May 2020
Contents
3 Movement
Controlling Movement | ||
---|---|---|
Code | Supported | Brief Description |
G0 | Yes | Rapid Move |
G1 | Yes | Working Move |
G2 | Yes | Clockwise Arc |
G2.1 | Yes | Spiral CW Arc1 |
G2.2 | Yes | Spiral CW Arc2 |
G2.3 | Yes | 3-Space CW Spiral Arc |
G3 | Yes | Counterclockwise Arc |
G3.1 | Yes | Spiral CCW Arc1 |
G3.2 | Yes | Spiral CCW Arc2 |
G3.3 | Yes | 3-Space CCW Spiral Arc |
G4 | Yes | Timed Pause |
G16 | Yes | Arc in Any Plane |
G17 | Yes | Arc in XY Plane |
G18 | Yes | Arc in XZ Plane |
G19 | Yes | Arc in YZ Plane |
M0 | Yes | Stop Until Resume |
M203 | Yes | Set G0 Speed |
4 Temperature
Controlling Temperature | ||
---|---|---|
Code | Supported | Brief Description |
M104 | Yes | Set Temp (Head) |
M106 | Yes | Set Cooling / Etc. |
M107 | Yes | Stop Cooling / Etc. |
M109 | Yes | Wait for Temp (Head) |
M116 | No | Pause for All Temps |
M140 | Yes | Set Temp (Bed) |
M141 | Yes | Set Temp (Chamber) |
M190 | Yes | Wait for Temp (Bed) |
M191 | Yes | Wait for Temp (Chamber) |
5 Flow
Controlling Material Flow | ||
---|---|---|
Code | Supported | Brief Description |
G10 | No | Absolute E |
G11 | No | Relative E |
M82 | Yes | Absolute E-Values |
M83 | Yes | Relative E-Values |
M221 | Yes | Set Flow Rate |
M229 | Yes | Use E Values |
M721 | Yes | Set Unprime Values |
M722 | Yes | Set Prime Values |
M723 | Yes | Set Manual Flow |
M728 | Yes | Set Motor Current Boost |
M756 | Yes | Set Height for Flow |
6 Position
Controlling Positin and Offsets | ||
---|---|---|
Code | Supported | Brief Description |
G20 | Yes | Set Units to Inches |
G21 | Yes | Set Units to Milimeters |
G28 | Yes | Send X, Y to Physical Home |
G53 | Yes | Clear Offsets |
G54-59 | Yes | Set Offsets |
G90 | Yes | Absolute Positioning |
G91 | Yes | Relatative Positioning |
G92 | Yes | Reset Coordinates |
G93 | Yes | Reset Coordinates |
M6 | Yes | Declare Head Offsets |
M660 | Yes | Set Tool Offsets |
M702-4 | Yes | Cloning Heads |
7 Lasers
Controlling Lasers and UV Pens | ||
---|---|---|
Code | Supported | Brief Description |
G0 | Yes | Rapid Move |
8 Spindles
Controlling Spindles and Lathes | ||
---|---|---|
Code | Supported | Brief Description |
G0 | Yes | Rapid Move |
9 Reporting
Reporting and Diagnostics | ||
---|---|---|
Code | Supported | Brief Description |
G0 | Yes | Rapid Move |
10 Aux Devices
Controlling Aux Devices | ||
---|---|---|
Code | Supported | Brief Description |
G0 | Yes | Rapid Move |
11 Other
Other Commands | ||
---|---|---|
Code | Supported | Brief Description |
G0 | Yes | Rapid Move |