Difference between revisions of "Emulsifiables"

From Hyrel3D
Jump to: navigation, search
Line 62: Line 62:
  
 
As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828.
 
As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828.
 +
 +
 +
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, here are our default shipping settings:
 +
 +
{| class="wikitable" style="text-align: center;"
 +
! style="width: 20%" | Settings:
 +
! style="width: 20%" | 19:1 Ratio:
 +
! style="width: 20%" | 27:1 Ratio:
 +
! style="width: 20%" | 51:1 Ratio:
 +
! style="width: 20%" | 100:1 Ratio:
 +
|-
 +
!colspan="5"| Material
 +
|-
 +
! Type
 +
| (any)
 +
| (any)
 +
| (any)
 +
| (any)
 +
|-
 +
! Color
 +
| (any)
 +
| (any)
 +
| (any)
 +
| (any)
 +
|-
 +
! Nozzle
 +
| 1.600
 +
| 1.600
 +
| 1.600
 +
| 1.600
 +
|-
 +
! Layer
 +
| (any)
 +
| (any)
 +
| (any)
 +
| (any)
 +
|-
 +
!colspan="5"| Temp Info
 +
|-
 +
! Print Temp
 +
| 30
 +
| 30
 +
| 30
 +
| 30
 +
|-
 +
! Power Factor
 +
| 100
 +
| 100
 +
| 100
 +
| 100
 +
|-
 +
! Minimum
 +
| (any)
 +
| (any)
 +
| (any)
 +
| (any)
 +
|-
 +
! Maximum
 +
| (any)
 +
| (any)
 +
| (any)
 +
| (any)
 +
|-
 +
!colspan="5"| Overrides
 +
|-
 +
! Pulses
 +
| 1.600
 +
| 2.300
 +
| 4.700
 +
| 8.750
 +
|-
 +
! Feed Rate %
 +
| 1.000
 +
| 1.000
 +
| 1.000
 +
| 1.000
 +
|-
 +
!colspan="3"| Prime
 +
|-
 +
! Steps
 +
| 500
 +
| 700
 +
| 900
 +
| 2000
 +
|-
 +
! Rate
 +
| 10,000
 +
| 10,000
 +
| 10,000
 +
| 10,000
 +
|-
 +
! Dwell Time (ms)
 +
| 100
 +
| 100
 +
| 110
 +
| 120
 +
|-
 +
! Before Tool Change
 +
| 1
 +
| 1
 +
| 1
 +
| 1
 +
|-
 +
!colspan="3"| Unprime
 +
|-
 +
! Steps
 +
| 400
 +
| 550
 +
| 750
 +
| 1600
 +
|-
 +
! Rate
 +
| 10,000
 +
| 10,000
 +
| 10,000
 +
| 10,000
 +
|-
 +
! Dwell Time (ms)
 +
| 100
 +
| 100
 +
| 100
 +
| 110
 +
|-
 +
! After Tool Change
 +
| 1
 +
| 1
 +
| 1
 +
| 1
 +
|-
 +
!colspan="5"| Offsets
 +
|-
 +
! Clone Head
 +
| Off
 +
| Off
 +
| Off
 +
| Off
 +
|-
 +
! X
 +
| 0,000
 +
| 0,000
 +
| 0,000
 +
| 0,000
 +
|-
 +
! Y
 +
| 0,000
 +
| 0,000
 +
| 0,000
 +
| 0,000
 +
|-
 +
! Z
 +
| 0,000
 +
| 0,000
 +
| 0,000
 +
| 0,000
 +
|-
 +
!colspan="5"| Head Info
 +
|-
 +
! Model
 +
| (varies)
 +
| (varies)
 +
| (varies)
 +
| (varies)
 +
|-
 +
! RTD Type
 +
| 1 Meg
 +
| 1 Meg
 +
| 1 Meg
 +
| 1 Meg
 +
|-
 +
! Motor Current
 +
| High
 +
| High
 +
| High
 +
| High
 +
|-
 +
! Step Mode
 +
| Sixteenth
 +
| Sixteenth
 +
| Sixteenth
 +
| Sixteenth
 +
|}

Revision as of 13:46, 8 December 2015

EMO-Type heads are for printing as follows:

  • With pastes, gels, emulsifiables or waxes.
  • At room or elevated temperatures.
  • With or without UV Crosslining.
  • With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.

These include the following:

EMO-Type Head Comparison
Model EMO-25 COD-25 VOL-25 VCD-25 KRA-15 KCD-15
Max Temp Ambient Ambient 100°C 100°C 150°C 150°C
UV Crosslinking no yes no yes no yes

Settings for these heads (based on planetary gear ratios) are as follows; you will need to adjust these for the qualities of your print media:

EMO-Type Head Settings
Gear
Reduction 		Overrides Prime Unprime
Pulses FR% Steps Dwell Steps Dwell
19:1 1.600 1.000 500 100 400 100
27:1 2.300 1.000 700 100 550 100
51:1 4.700 1.000 900 110 750 105
100:1 8.750 1.000 2000 120 1600 110

As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828.


Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, here are our default shipping settings:

Settings: 19:1 Ratio: 27:1 Ratio: 51:1 Ratio: 100:1 Ratio:
Material
Type (any) (any) (any) (any)
Color (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600
Layer (any) (any) (any) (any)
Temp Info
Print Temp 30 30 30 30
Power Factor 100 100 100 100
Minimum (any) (any) (any) (any)
Maximum (any) (any) (any) (any)
Overrides
Pulses 1.600 2.300 4.700 8.750
Feed Rate % 1.000 1.000 1.000 1.000
Prime
Steps 500 700 900 2000
Rate 10,000 10,000 10,000 10,000
Dwell Time (ms) 100 100 110 120
Before Tool Change 1 1 1 1
Unprime
Steps 400 550 750 1600
Rate 10,000 10,000 10,000 10,000
Dwell Time (ms) 100 100 100 110
After Tool Change 1 1 1 1
Offsets
Clone Head Off Off Off Off
X 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000
Head Info
Model (varies) (varies) (varies) (varies)
RTD Type 1 Meg 1 Meg 1 Meg 1 Meg
Motor Current High High High High
Step Mode Sixteenth Sixteenth Sixteenth Sixteenth
Retrieved from "https://hyrel3d.com/wiki/index.php?title=Emulsifiables&oldid=296"