Difference between revisions of "Main Page"

From Hyrel3D
Jump to: navigation, search
(→‎Warm Flow)
 
(284 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
|}
 
|}
  
−
=Welcome to Hyrel!=
+
'''[[Repetrel_Download|Repetrel version 4.2.596 is available here!]]'''
  
−
With literally thousands of materials to print on the Hyrel Printer, we have broken down the list of materials into logical groups based on their printing temperature and type of head used to print them.
+
== '''New Users Start Here - Learn about our Equipment''' ==
  
−
If you are planning on using the heads which photoinitiate crosslinking, make sure you specify the correct wavelength of LED for your material.
+
At Hyrel, we do things differently. Please get a feel for how Hyrel equipment works with this pdf and with these videos:
  
−
A standard material printing data sheet has been created for materials that have been internally tested; you can access this data by clicking on the material name below.
+
# '''PDF:''' [http://hyrel3d.net/instructions/t1/HYREL%203D%20-%20T1%20Training%20Session.pdf First Training Session]
 +
# [[File:Yt.png]] [https://www.youtube.com/watch?v=mVyCq7CPGLg Session 1A: Hardware and Software Overview Video]
 +
# [[File:Yt.png]] [https://www.youtube.com/watch?v=2tIHw_JIQAI Session 1B: Communications and Tramming Video]
 +
# [[File:Yt.png]] [https://www.youtube.com/watch?v=lFATCfKJf4I Session 1C: Setting Z-Zero and Emulsifiable Print Video]
  
−
=Printers=
+
For more detailed instructions, please continue from '''[http://hyrel3d.net/wiki/index.php/Instructions#Additional_Emulsifiable_Videos this point on the Instrucions page].'''
  
−
As of Jan, 2016, Hyrel Printers are available in two models: [[Engines]] and [[Systems]].
+
== '''Experienced Users Start Here - Compare our Models''' ==
  
−
==Engines and Systems==
+
Once you have an idea of how we do things, you should learn more about our different models of printer and our wide array of filament heads, emulsion/paste/liquid heads, laser options, spindle tools, and more.
  
−
[[Engines]] are open-air models. Detailed information is on the [[Engines]] page. [[Systems]] are enclosed models. Detailed information is on the [[Systems]] page. Both models feature over 200x200x200mm of build volume. Each model can take up to four of our modular heads detailed below. Build plates will get to between 70°C and 85°C, depending on ambient temperature.
+
1. Compare our various models with '''[http://hyrel3d.net/wiki/index.php/Overview#Comparison this chart]'''.
  
−
==The Next Big Thing==
+
2. Compare our various accessories with '''[http://hyrel3d.net/wiki/index.php/Overview#Comparison_2 this chart]'''.
  
−
Information not yet available. :)
 
  
−
=Cold Flow=
+
== '''Skeptical Users Start Here - Download and Try our Software for FREE''' ==
  
−
Cold Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at room temperature, with or without UV Crosslinking.
+
Our '''[[Repetrel]]''' Software controls all versions of our printers, as well as our in-house CNC machines and other side projects. Most of the features are explained on our '''[[Repetrel]]''' page.
  
−
==Materials, Cold Flow==
+
To try it for yourself (limited without a Hyrel printer attached), just:
  
−
The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips.
+
1. Install '''[http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe EcoSystems Apps].'''
  
−
<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
+
2. Install '''[http://hyrel3d.net/downloads/repetrel/repetrel_3.083_K_dfu_3.083e.rar Repetrel].'''
−
*[[3P Quick Cure Clay]]
 
−
*[[Adhesives]]
 
−
*[[Clay]]
 
−
*[[Epoxy]], Two-part
 
−
*[[Fimo]]
 
−
*[[Glue]]
 
−
*[[Kato]]
 
−
*[[Metal Clay]], including Precious Metal Clay (PMC)
 
−
*[[Modeling Clay]]
 
−
*[[PEG]]
 
−
*[[Porcelain]]
 
−
*[[Plasticine]]
 
−
*[[Play-Doh]]
 
−
*[[Resins]]
 
−
*[[RTV Silicone]]
 
−
*[[Sculpey]]
 
−
*[[Sugru]]
 
−
</div>
 
  
−
==Heads, Cold Flow==
+
Full install instructions are at our '''[[New Install]]''' page.
  
−
{| border="1" class="wikitable sortable" style="width: 85%;"
 
−
|+ Cold Flow Head Properties
 
−
! style="width: 15%;" | Head
 
−
! style="width: 15%;" | Container
 
−
! style="width: 15%;" | Capacity
 
−
! style="width: 15%;" | Nozzle
 
−
! style="width: 15%;" | UV Crosslinking
 
−
|-
 
−
! [[EMO-25]]
 
−
| Aluminum
 
−
| 25cc
 
−
| 1.5mm, 2.0mm, Luer
 
−
| No
 
−
|-
 
−
! [[COD-25]]
 
−
| Aluminum
 
−
| 25cc
 
−
| Luer
 
−
| Yes
 
−
|-
 
−
! [[SDS-5]]
 
−
| Syringe
 
−
| 05cc
 
−
| Luer
 
−
| No
 
−
|-
 
−
! [[CSD-5]]
 
−
| Syringe
 
−
| 05cc
 
−
| Luer
 
−
| Yes
 
−
|-
 
−
! [[SDS-10]]
 
−
| Syringe
 
−
| 10cc
 
−
| Luer
 
−
| No
 
−
|-
 
−
! [[CSD-10]]
 
−
| Syringe
 
−
| 10cc
 
−
| Luer
 
−
| Yes
 
−
|-
 
−
! [[SDS-30]]
 
−
| Syringe
 
−
| 30cc
 
−
| Luer
 
−
| No
 
−
|-
 
−
! [[CSD-30]]
 
−
| Syringe
 
−
| 30cc
 
−
| Luer
 
−
| Yes
 
−
|-
 
−
! [[SDS-60]]
 
−
| Syringe
 
−
| 60cc
 
−
| Luer
 
−
| No
 
−
|-
 
−
! [[CSD-60]]
 
−
| Syringe
 
−
| 60cc
 
−
| Luer
 
−
| Yes
 
−
|-
 
−
|}
 
  
 +
== '''DIY Users Start Here - Look at our Resources''' ==
  
−
==Research Papers Citing Hyrel Cold Flow==
+
1. '''[[Repetrel]]''' Overview
−
*[http://hyrel3d.net/papers/Hydrogels_for_Bone_Tissue_Engineering.pdf Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]
 
−
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]
 
  
−
=Warm Flow=
+
2. List of all '''[[Videos]]'''
  
−
Warm Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at up to 150°C, with or without UV Crosslinking, depending on the head.
+
3. '''[[Gcode]]''' Explained
  
−
PCL and other medium temperature material can be printed directly from Pellets the size of small peas. If you pulverize or powder your polymer, it is possible to pre-mix the material dry and test different alloys of plastics.
+
4. Use links on the sidebar
  
−
==Materials, Warm Flow==
 
  
−
The following materials can be printed from Warm Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips, or may print more easily at higher temperatures.
+
== '''Inquiring Users Start Here - Contact Us''' ==
  
−
<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
+
Email: '''hyrel3d@hyrel3d.com'''
−
*[[Adhesives]]
 
−
*[[Fimo]]
 
−
*[[Kato]]
 
−
*[[Glue]]
 
−
*[[PCL]]
 
−
*[[Plasticine]]
 
−
*[[Resins]]
 
−
*[[Sculpey]]
 
−
*[[Wax]]
 
−
</div>
 
  
−
==Heads, Warm Flow==
+
Phone: '''+1 404-914-1748'''
  
−
{| border="1" class="wikitable sortable" style="width: 85%;"
+
Skype Name: '''hy.rel'''<br>
−
|+ Warm Flow Head Properties
+
Skype Location: '''Johns Creek, US'''
−
! style="width: 15%;" | Head
 
−
! style="width: 15%;" | Max Temp
 
−
! style="width: 15%;" | Container
 
−
! style="width: 15%;" | Capacity
 
−
! style="width: 15%;" | Nozzle
 
−
! style="width: 15%;" | UV Crosslinking
 
−
|-
 
−
! [[VOL-25]]
 
−
| 100°C
 
−
| Aluminum
 
−
| 25cc
 
−
| 1.5mm, 2.0mm, Luer
 
−
| No
 
−
|-
 
−
! [[VCD-25]]
 
−
| 100°C
 
−
| Aluminum
 
−
| 25cc
 
−
| Luer
 
−
| Yes
 
−
|-
 
−
! [[KRA-15]]
 
−
| 150°C
 
−
| Stainless
 
−
| 15cc
 
−
| 1.5mm, 2mm, Luer
 
−
| No
 
−
|-
 
−
! [[KCD-15]]
 
−
| 150°C
 
−
| Stainless
 
−
| 15cc
 
−
| Luer
 
−
| Yes
 
−
|-
 
−
|}
 
  
−
=Hot Flow=
+
=== Can we print your material? ===
  
−
Hot Flow means 1.75mm diameter, filament-based materials which are deposited at up to 450°C, depending on the head.
+
'''Probably... please tell us:'''
  
−
==Materials, Hot Flow==
+
# What form it is in at room temperature (powder, granules, filament, gel, etc).
 +
# Do you need the environment or build surface at a certain temperature?
 +
# For Filaments:
 +
## At what temperature will it be printed?
 +
## Is it 1.75mm +/- 0.1mm?
 +
# For liquids, gels, granules or powders:
 +
## At what temperature will it be deposited?
 +
## Is it homogeneous or pre-mixed, or do we need to mix it as we dispense?
 +
### If mixed as dispensed, at static or dynamic ratios?
 +
## How does it harden or cure (by cooling, by heating, with humidity, with UV light (specify wavelength))?
 +
## Is it photosensitive? Energetic? Caustic? Any special handling, safety or ventilation requirements?
 +
## What viscosity is it during deposition?
  
−
<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
 
−
*[[ABS]]
 
−
*[[BendLay]]
 
−
*[[FilaFlex]]
 
−
*[[Flex45]]
 
−
*[[LayBrick]]
 
−
*[[LayWood]]
 
−
*[[NinjaFlex]]
 
−
*[[Nylon]]
 
−
*[[PC]]
 
−
*[[PEEK]]
 
−
*[[PET]]
 
−
*[[PETG]]
 
−
*[[PETT]]
 
−
*[[PLA]]
 
−
*[[PlastInk Rubber]]
 
−
*[[PP]]
 
−
*[[PVA]]
 
−
*[[T-Glase]]
 
−
</div>
 
  
−
==Heads, Hot Flow==
 
  
−
{| border="1" class="wikitable sortable" style="width: 85%;"
+
We also have partners in France and India, and CE marked units are available.
−
|+ Hot Flow Head Properties
 
−
! style="width: 10%;" | Head
 
−
! style="width: 10%;" | Min Temp
 
−
! style="width: 10%;" | Max Temp
 
−
! style="width: 10%;" | Filament Type
 
−
! style="width: 10%;" | Nozzle
 
−
! style="width: 20%;" | Recommended For
 
−
|-
 
−
! [[MK1-250]]
 
−
| 150°C
 
−
| 250°C
 
−
| Standard
 
−
| .35mm, .50mm, .75mm, 1.0mm
 
−
| ABS, LayBrick, LayWood, Nylon PC, PET, PETG, PETT, PLA, PP, PVA, T-Glase
 
−
|-
 
−
! [[MK2-250]]
 
−
| 150°C
 
−
| 250°C
 
−
| Flexible
 
−
| .35mm, .50mm, .75mm, 1.0mm
 
−
| BendLay, FilaFlex, Flex45, NinjaFlex, PlastInk Rubber
 
−
|-
 
−
! [[MK1-450]]
 
−
| 250°C
 
−
| 450°C
 
−
| Engineering
 
−
| .50mm
 
−
| PC, PEEK
 
−
|-
 
−
|}
 
  
 +
== A Note about COVID-19, the latest Corona Virus ==
  
−
==Research Papers Citing Hyrel Hot Flow==
+
We are still building and shipping units, while abiding by safety recommendations.
−
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
+
 
−
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
+
 
−
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
+
.
−
* [http://hyrel3d.net/papers/3D_Printed_Loop_Antenna_for_Wearable_and_IoT_Applications.pdf A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
 
−
* [http://hyrel3d.net/papers/RF_Characterization_of...NinjaFlex.pdf RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]
 

Latest revision as of 10:40, 6 July 2023

Repetrel version 4.2.596 is available here!

New Users Start Here - Learn about our Equipment

At Hyrel, we do things differently. Please get a feel for how Hyrel equipment works with this pdf and with these videos:

  1. PDF: First Training Session
  2. Yt.png Session 1A: Hardware and Software Overview Video
  3. Yt.png Session 1B: Communications and Tramming Video
  4. Yt.png Session 1C: Setting Z-Zero and Emulsifiable Print Video

For more detailed instructions, please continue from this point on the Instrucions page.

Experienced Users Start Here - Compare our Models

Once you have an idea of how we do things, you should learn more about our different models of printer and our wide array of filament heads, emulsion/paste/liquid heads, laser options, spindle tools, and more.

1. Compare our various models with this chart.

2. Compare our various accessories with this chart.


Skeptical Users Start Here - Download and Try our Software for FREE

Our Repetrel Software controls all versions of our printers, as well as our in-house CNC machines and other side projects. Most of the features are explained on our Repetrel page.

To try it for yourself (limited without a Hyrel printer attached), just:

1. Install EcoSystems Apps.

2. Install Repetrel.

Full install instructions are at our New Install page.


DIY Users Start Here - Look at our Resources

1. Repetrel Overview

2. List of all Videos

3. Gcode Explained

4. Use links on the sidebar


Inquiring Users Start Here - Contact Us

Email: hyrel3d@hyrel3d.com

Phone: +1 404-914-1748

Skype Name: hy.rel
Skype Location: Johns Creek, US

Can we print your material?

Probably... please tell us:

  1. What form it is in at room temperature (powder, granules, filament, gel, etc).
  2. Do you need the environment or build surface at a certain temperature?
  3. For Filaments:
    1. At what temperature will it be printed?
    2. Is it 1.75mm +/- 0.1mm?
  4. For liquids, gels, granules or powders:
    1. At what temperature will it be deposited?
    2. Is it homogeneous or pre-mixed, or do we need to mix it as we dispense?
      1. If mixed as dispensed, at static or dynamic ratios?
    3. How does it harden or cure (by cooling, by heating, with humidity, with UV light (specify wavelength))?
    4. Is it photosensitive? Energetic? Caustic? Any special handling, safety or ventilation requirements?
    5. What viscosity is it during deposition?


We also have partners in France and India, and CE marked units are available.

A Note about COVID-19, the latest Corona Virus

We are still building and shipping units, while abiding by safety recommendations.


.

Retrieved from "https://hyrel3d.com/wiki/index.php?title=Main_Page&oldid=7379"