Difference between revisions of "Test"
(Created page with "{| class="wikitable" style="text-align: center;" ! style="width: 30%" | Settings: ! style="width: 30%" | MK1-250: ! style="width: 30%" | MK1-350/400: |- !colspan="3"| Materia...") |
(No difference)
|
Revision as of 13:28, 8 December 2015
Settings: | MK1-250: | MK1-350/400: |
---|---|---|
Material | ||
Type | (any) | (any) |
Color | (any) | (any) |
Nozzle | 0.500 | 0.500 |
Layer | (any) | (any) |
Temp Info | ||
Print Temp | 240 | 410 |
Power Factor | 100 | 100 |
Minimum | (any) | (any) |
Maximum | (any) | (any) |
Overrides | ||
Pulses | 0.78 | 0.78 |
Feed Rate % | 1.000 | 1.000 |
Prime | ||
Steps | 250 | 250 |
Rate | 10,000 | 10,000 |
Dwell Time (ms) | 50 | 50 |
Before Tool Change | 1 | 1 |
Unprime | ||
Steps | 250 | 250 |
Rate | 10,000 | 10,000 |
Dwell Time (ms) | 60 | 60 |
After Tool Change | 1 | 1 |
Offsets | ||
Clone Head | Off | Off |
X | 0,000 | 0,000 |
Y | 0,000 | 0,000 |
Z | 0,000 | 0,000 |
Head Info | ||
Model | 250 | 250 |
RTD Type | 1 Meg | 1 Meg |
Motor Current | High | High |
Step Mode | Sixteenth | Sixteenth |