Head Overview

Hyrel 3D Printers offer a variety of modular print heads, which are compared below.

Modular Heads Comparison

The following chart compares and contrasts the various extrusion heads:

Extrusion Heads Comparison

Designation	Image	Material	Viscosity	Power	Volume	Reservoir	Temperature	SBP#	Other
FH2-260		1.75mm Filament	Standard	NEMA 17 5.18:1	n/a	n/a	Up to 250°C limited use up to 265°C	104211	For Standard Material
FH2-450		1.75mm Filament	Exotic	NEMA 17 5.18:1	n/a	n/a	300 to 450°C	104211-450	For High-Temp Material
HT3-250		2.85mm Filament	Standard	NEMA 17 14:1	n/a	n/a	Up to 250°C limited use up to 265°C	402219	For Standard Material
HT3-450		2.85mm Filament	Exotic	NEMA 17 14:1	n/a	n/a	300 to 450°C	400109-3	For High-Temp Material
SDS-1		Liquid, Gel	Up to 100,000 cP	NEMA 11 3:1	1cc	Polypropylene	Ambient	402099-1-A	Disposable Reservoir Normal Torque
SDS-5		Liquid, Gel	Up to 100,000 cP	NEMA 11 3:1	5cc	Polypropylene	Ambient	?	Disposable Reservoir Normal Torque
SDS-10		Liquid, Gel	Up to 100,000 cP	NEMA 11 3:1	10cc	Polypropylene	Ambient	?	Disposable Reservoir Normal Torque
HSD-10-Ardes		Liquid, Gel	Up to 100,000 cP	NEMA 11 1:1	10cc	Polyamide	Up to 100°C	?	n/a
SDS-30		Liquid, Gel	Up to 100,000 cP	NEMA 11 3:1	30cc	Polypropylene	Ambient	?	Disposable Reservoir Normal Torque
SDS-30XT		Liquid, Gel	Up to 300,000 cP	NEMA 17 25.9:1	30cc	Polypropylene	Ambient	?	Disposable Reservoir Extra Torque
HSD-30-BD		Liquid, Gel	Up to 100,000 cP	NEMA 11 3:1	30cc	Polypropylene	Up to 50°C	?	Disposable Reservoir Normal Torque
RSD-30-BD		Liquid, Gel	Up to 100,000 cP	NEMA 11 3:1	30cc	Polypropylene	-5°C to 80°C	?	Disposable Reservoir Normal Torque
SDS-60		Liquid, Gel	Up to 100,000 cP	NEMA 11 3:1	60cc	Polypropylene	Ambient	?	Disposable Reservoir Normal Torque
SDS-60XT		Liquid, Gel	Up to 300,000 cP	NEMA 17 25.9:1	60cc	Polypropylene	Ambient	?	Disposable Reservoir Extra Torque
SDS-150XT	50px	Liquid, Gel	Up to 300,000 cP	NEMA 17 25.9:1	60cc	Polypropylene	Ambient	?	Disposable Reservoir Extra Torque
DSD-50	50px	Two-part Mixtures	Up to 100,000 cP	NEMA 11 1:1	25cc each part	Polypropylene	Ambient	402099-50-DSD	Disposable Reservoirs Normal Torque 1:1, 2:1, 3:1 Blend Ratios
DSD-50XT	50px	Two-part Mixtures	Up to 300,000 cP	NEMA 17 25.9:1	25cc each part	Polypropylene	Ambient	402099-50-DSD-Xt	Disposable Reservoirs Normal Torque 1:1, 2:1, 3:1 Blend Ratios
SMH-2		Two-part Mixtures	Up to 100,000 cP	Depends on feeding heads	Depends on feeding heads	Depends on feeding heads	Ambient	402132-ALUM	*Fed by other heads Variable Blend Ratios
DMH-2		Two-part Mixtures	Depends on feeding heads	Depends on feeding heads	Depends on feeding heads	Depends on feeding heads	Ambient	400110-A	*Fed by other heads Variable Blend Ratios
EMO		Liquid, Gel, Paste	Up to 300,000 cP	NEMA 11 19:1, 27:1	25cc	Aluminum	Ambient	402098-A	Reusable Reservoir Normal Torque
EMO-XT eXtra Torque		Liquid, Gel, Paste, Clay	Up to 1,000,000 cP	NEMA 11 100:1	10cc	Stainless	Ambient	402098-XT	Reusable Reservoir High Torque
EMO-ST Super Torque		Liquid, Gel, Paste, Clay	Up to 2,000,000 cP	NEMA 17 25.9:1	30cc	Stainless	Ambient	402184	Reusable Reservoir High Torque
EMO-300XT eXtra Torque		Liquid, Gel, Paste, Clay	Up to 1,000,000 cP	NEMA 11 100:1	300cc	Stainless	Ambient	402440	Reusable Reservoir High Torque
VOL		Liquid, Gel, Paste	Up to 300,000 cP	NEMA 11 51:1	25cc	Aluminum	Up to 90°C	404041-A	Reusable Reservoir Normal Torque
KR2		Paste, Clay, Hot Glue	Up to 1,000,000 cP	NEMA 11 100:1	10cc	Stainless	Up to 180°C	404042-ALUM	Reusable Reservoir High Torque
KR2-ST Super Torque		Paste, Clay, Hot Glue	Up to 2,000,000 cP	NEMA 17 25.9:1	30cc	Stainless	Up to 180°C	402184-K	Reusable Reservoir High Torque
TAM		Paste, Clay, Hot Glue	Up to 1,000,000 cP	NEMA 11 100:1	10cc	Stainless	Up to 270°C	404048-ALUM	Reusable Reservoir High Torque
TAM-ST		Paste, Clay, Hot Glue	Up to 2,000,000 cP	NEMA 17 25.9:1	10cc	Stainless	Up to 270°C	404048-ST	Reusable Reservoir High Torque
UVP-365 nm		Photoinitiators	n/a	~1 W	n/a	n/a	n/a	402302-365	Focusable
UVP-405 nm		Photoinitiators	n/a	~1 W	n/a	n/a	n/a	402302-405	Focusable
UVP-450 nm		Photoinitiators	n/a	~1 W	n/a	n/a	n/a	402302-450	Focusable
LA6-450		Opaque	Laser	6 W	n/a	n/a	n/a	402108-A	6 W, 450 nm, 0.25 mm ⌀
ST1		Waxes, Plastics LIGHT Drilling	Spindle Tool	n/a	12VDC, 4A, 40W	n/a	n/a	402084-A	5,000 (with no load)
ST3		Plastics, Brass LIGHT Machining	Spindle Tool	n/a	48VDC, 8.3A, 400W	n/a	n/a	402081-A	12,000 (with no load)

Note, for crosslinking heads, just see the standard heads and add the UV LED mechanism.

For details about Filament-based print heads, please visit our Filament_Heads page.

For details about Reservoir-based print heads, please visit our Reservoir_Heads page.

Nordson and ViscoTec Heads

Some customers have requested that we configure our equipment in such a way that heads from other companies like the Nordson Ultimus V heads or one of the Viscotec Vipro heads.

Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all.

Click image for a larger image.