Difference between revisions of "Printer Overview"
(→The System 30M, 30, and 23) |
(→The Engines) |
||
Line 155: | Line 155: | ||
|colspan="4"|Quiet Storm Fan, Microscope, UV Pens | |colspan="4"|Quiet Storm Fan, Microscope, UV Pens | ||
|} | |} | ||
− | |||
− | |||
− | |||
− |
Revision as of 12:26, 18 July 2023
Contents |
Hyrel Printers are available in the following models: Hydras are our larger, gantry models; Systems are our tabletop, enclosed models; and Engines are the smaller, unenclosed models - available in Standard Resolution (SR) and High Resolution (HR, for bioprinting) versions.
All models use our Repetrel software and any slicer (Slic3r support provided). Each model comes with a Windows PC, either tablet or full desktop style. We operate our print heads via CANbus.
Printer Comparison
The following chart compares and contrasts the various models:
Designation | Benchtop Enclosed, Heated |
Benchtop Enclosed, Heating Optional |
Desktop Unenclosed |
Desktop, High Precision Unenclosed |
---|---|---|---|---|
Hydra 21 | System 30M | Engine SR | Engine HR | |
Target Users |
Laboratory Research | Laboratory Research | Budget Research | Biological Research |
Image | |
|
|
|
Placement Mechanism |
Benchtop Model Gantry Design |
Benchtop Model Knee Design |
Desktop Model Knee Design | |
Exterior Dimensions, XxYxZ (closed) |
42x24x33 in 107x61x84 cm |
34x16x32 in 87x41x82 cm |
13x21x22 in 33x54x56 cm |
13x20x19 in 33x51x49 cm |
Power Requirements |
8 A / 208-240 VAC (single phase) / 50-60 Hz | 15 A / 110-120 VAC / 60 Hz 8 A / 208-240 VAC (single phase) / 50 Hz | ||
Build Volume | 16x12x10 in / 400x300x250 mm 20x16x10 in / 500x400x250 mm option |
8x8x8 in 200x200x200 mm |
4x4x4 in 100x100x100 mm | |
Bed Temperatures |
120°C / 200°C option / -5°C option Note that 200°C beds larger than 400x300mm require 230VAC for optimal heating. |
85-90°C | 100°C / 200°C option / -5°C option | |
Max Chamber Temperatures |
65° standard hotter models in development |
~10°C above ambient as-is 55°C with additional heating |
no chamber | |
Bed RTDs | 1k PLAT | 10k | 1k PLAT | |
Max Bed Payload | 20 lbs 9 kg |
2.2 lbs 1 kg | ||
Max Yoke Payload | 5 lbs 2.2 kg |
2.2 lbs 1 kg |
5 lbs 2.2 kg | |
X/Y Printing Speeds |
Up to 60 mm/sec | Up to 30 mm/sec | Up to 15 mm/sec | |
Enclosure | Heated to 55°C by the hotbed |
Enclosed *Opt Heated to 55°C |
Unenclosed | |
Motion Control | 3-Phase with Closed-Loop Feedback |
0.9° Stepping Motor now with Closed-Loop Feedback as of Apr 2022 | ||
Positional Resolution X/Y/Z in µm |
6 / 6 / 1 | 5 / 5 / 1 | 1 / 1 / 1 | |
Positional Accuracy X/Y/Z in µm |
60 / 60 / 10 | 50 / 50 / 10 | 10 / 10 / 10 | |
Positional Repeatability X/Y/Z in µm |
60 / 60 / 10 | 50 / 50 / 10 | 10 / 10 / 10 | |
Precise X/Y Output for Bioplots |
100 µm lines 200 µm spacing |
50 µm lines 100 µm spacing | ||
Precise Z output for Bioplots |
25 µm layers | |||
Tool Positions Optional |
Five Ten |
Four | Five | |
Reservoir Ambient Options |
All EMO, SDS, DSD and SMH Heads | |||
Reservoir Temp Ctrl Options |
All VOL, KRA, TAM, RSD, and HSD Heads | |||
Filament Options |
All FH2-* and HT3-* Heads | |||
Low Power Laser Options |
6w, 450nm, GaN Diode and 2w, 450nm GaN Diode | |||
High Power Laser Options |
In Development | Not Applicable | ||
Spindle Tool Compatibility |
Standard Three-Phase |
Standard | Not Applicable | |
Max Axes | Max of 5: X, Y, Z Optional 4th A Axis (Lathe) Optional 4/5th A/B Axes (Trunion) |
Max of 3: X, Y, Z | Max of 4: X, Y, Z Optional 4th A Axis (Lathe) | |
Pick & Place Compatibility |
Yes | No | ||
Other Options |
Quiet Storm Fan, Microscope, UV Pens |