Printer Overview

From Hyrel3D
Revision as of 16:08, 4 January 2024 by Davo (talk | contribs) (Printer Comparison)
Jump to: navigation, search

Hyrel Printers are available in the following models: Hydras are our larger, gantry models; Systems are our tabletop, enclosed models; and Engines are the smaller, unenclosed models - available in Standard Resolution (SR) and High Resolution (HR, for bioprinting) versions.

All models use our Repetrel software and any slicer (Slic3r support provided). Each model comes with a Windows PC, either tablet or full desktop style. We operate our print heads via CANbus.

Printer Comparison

The following chart compares and contrasts the various models:

Printer Model Comparison
Designation Benchtop
Enclosed, Heated
Benchtop
Enclosed, Heating Optional
Desktop
Unenclosed
Desktop, High Precision
Unenclosed
Hydra 21 System 30M Engine SR Engine HR
Target
Users
Laboratory Research Laboratory Research Budget Research Biological Research
Image
Placement
Mechanism
Benchtop Model
Gantry Design
Benchtop Model
Knee Design
Desktop Model
Knee Design
Exterior Dimensions,
XxYxZ (closed)
42x24x33 in
107x61x84 cm
34x16x32 in
87x41x82 cm
13x21x22 in
33x54x56 cm
13x20x19 in
33x51x49 cm
Power
Requirements
15 A / 110-120 VAC / 60 Hz
8 A / 208-240 VAC (single phase) / 50 Hz
15 A / 110-120 VAC / 60 Hz
8 A / 208-240 VAC (single phase) / 50 Hz
Build Volume 16x12x10 in / 400x300x250 mm
20x16x10 in / 500x400x250 mm option
8x8x8 in
200x200x200 mm
4x4x4 in
100x100x100 mm
Bed
Temperatures
120°C / 200°C option / -5°C option
Note that 200°C beds larger than 400x300mm
require 230VAC for optimal heating.
85-90°C 100°C / 200°C option / -5°C option
Max Chamber
Temperatures
65° standard
hotter models in development
~10°C above ambient as-is
55°C with additional heating
no chamber
Bed RTDs 1k PLAT 10k 1k PLAT
Max Bed Payload 20 lbs
9 kg
2.2 lbs
1 kg
Max Yoke Payload 5 lbs
2.2 kg
2.2 lbs
1 kg
5 lbs
2.2 kg
X/Y Printing
Speeds
Up to 60 mm/sec Up to 30 mm/sec Up to 15 mm/sec
Enclosure Polycarbonate
Heated to 55°C by the hotbed
Polycarbonate
*Optionally Heated to 55°C
Unenclosed
Motion Control 3-Phase with
Closed-Loop Feedback
0.9° Stepping Motor
now with Closed-Loop Feedback as of Apr 2022
Positional Resolution
X/Y/Z in µm
5 / 5 / 1 5 / 5 / 1 1 / 1 / 1
Positional Accuracy
X/Y/Z in µm
50 / 50 / 10 50 / 50 / 10 10 / 10 / 10
Positional Repeatability
X/Y/Z in µm
50 / 50 / 10 50 / 50 / 10 10 / 10 / 10
Precise X/Y Output
for Bioplots
100 µm lines
200 µm spacing
50 µm lines
100 µm spacing
Precise Z output
for Bioplots
25 µm layers
Tool Positions
Optional
Five
Ten
Four Five
Reservoir
Ambient
Options
All EMO, SDS, DSD and SMH Heads
Reservoir
Temp Ctrl
Options
All VOL, KRA, TAM, RSD, and HSD Heads
Filament
Options
All FH2-* and HT3-* Heads
Low Power
Laser Options
6w, 450nm, GaN Diode and 2w, 450nm GaN Diode
High Power
Laser Options
In Development Not Applicable
Spindle Tool
Compatibility
Standard
Three-Phase
Standard Not Applicable
Max Axes Max of 5: X, Y, Z
Optional 4th A Axis (Lathe)
Optional 4/5th A/B Axes (Trunion)
Max of 3: X, Y, Z Max of 4: X, Y, Z
Optional 4th A Axis (Lathe)
Pick & Place
Compatibility
Yes No
Other
Options
Quiet Storm Fan, Microscope, UV Pens

Power Requirements

The Hydra 21 requires 8 A / 208-240 VAC (single phase) / 50-60 Hz.

The 30M, EHR, and ESR each can be plugged into 15 A / 110-120 VAC / 60 Hz OR 8 A / 208-240 VAC (single phase) / 50 Hz. The power supplies are auto-detecting and auto-switching.

Customers outside of North America will have to provide their own power cord with an IEC connection to the printer.

Customers in North America may have to modify or replace the power cord to fit their organization's provided outlet.