Head Overview
Hyrel 3D Printers offer a variety of modular print heads, which are compared below.
Modular Heads Comparison
The following chart compares and contrasts the various extrusion heads:
Designation | Image | Material | Viscosity | Motor | Volume | Reservoir | Temperature | Internal # | Other |
---|---|---|---|---|---|---|---|---|---|
FH2-260 | 1.75mm Filament | Standard | NEMA 17 5.18:1 |
n/a | n/a | Up to 250°C limited use up to 265°C |
104211 | For Standard Material | |
FH2-450 | 1.75mm Filament | Exotic | NEMA 17 5.18:1 |
n/a | n/a | 300 to 450°C | 104211-450 | For High-Temp Material | |
HT3-250 | 2.85mm Filament | Standard | NEMA 17 14:1 |
n/a | n/a | Up to 250°C limited use up to 265°C |
402219 | For Standard Material | |
HT3-450 | 2.85mm Filament | Exotic | NEMA 17 14:1 |
n/a | n/a | 300 to 450°C | 400109-3 | For High-Temp Material | |
SDS-1 | Liquid, Gel | Up to 100,000 cP | NEMA 11 3:1 |
Actual: 1cc Usable: 1cc |
Polypropylene | Ambient | 402099-1-A | Disposable Reservoir Normal Torque | |
SDS-5 | Liquid, Gel | Up to 100,000 cP | NEMA 11 3:1 |
Actual: 5cc Usable:5cc |
Polypropylene | Ambient | 402099-5-Alum | Disposable Reservoir Normal Torque | |
SDS-10 | Liquid, Gel | Up to 100,000 cP | NEMA 11 3:1 |
Actual: 10cc Usable:10cc |
Polypropylene | Ambient | 402099-10-Alum | Disposable Reservoir Normal Torque | |
HSD-10-Ardes | Liquid, Gel | Up to 100,000 cP | NEMA 11 1:1 |
Actual: 10cc Usable:10cc |
Polyamide | Up to 100°C | 404047-A | n/a | |
SDS-30 | Liquid, Gel | Up to 100,000 cP | NEMA 11 3:1 |
Actual: 30cc Usable:30cc |
Polypropylene | Ambient | 402099-30-Alum | Disposable Reservoir Normal Torque | |
SDS-30XT | Liquid, Gel | Up to 300,000 cP | NEMA 17 25.9:1 |
Actual: 30cc Usable:30cc |
Polypropylene | Ambient | 402099-30-XT-A | Disposable Reservoir Extra Torque | |
HSD-30-BD | Liquid, Gel | Up to 100,000 cP | NEMA 11 3:1 |
Actual: 30cc Usable:30cc |
Polypropylene | Up to 50°C | 402099-HSD-30 | Disposable Reservoir Normal Torque | |
RSD-30-BD | Liquid, Gel | Up to 100,000 cP | NEMA 11 3:1 |
Actual: 30cc Usable:30cc |
Polypropylene | -5°C to 80°C | 404155-A | Disposable Reservoir Normal Torque | |
SDS-60 | Liquid, Gel | Up to 100,000 cP | NEMA 11 3:1 |
Actual: 60cc Usable:60cc |
Polypropylene | Ambient | 402099-60-Alum | Disposable Reservoir Normal Torque | |
SDS-60XT | Liquid, Gel | Up to 300,000 cP | NEMA 17 25.9:1 |
Actual: 60cc Usable:60cc |
Polypropylene | Ambient | 402099-60-XT-A | Disposable Reservoir Extra Torque | |
SDS-150XT | 50px | Liquid, Gel | Up to 300,000 cP | NEMA 17 25.9:1 |
Actual: 60cc Usable:60cc |
Polypropylene | Ambient | 402099-150-A | Disposable Reservoir Extra Torque |
DSD-50 | 50px | Two-part Mixtures | Up to 100,000 cP | NEMA 11 1:1 |
Actual & Usable: 25cc each part |
Polypropylene | Ambient | 402099-50-DSD | Disposable Reservoirs Normal Torque 1:1, 2:1, 3:1 Blend Ratios |
DSD-50XT | 50px | Two-part Mixtures | Up to 300,000 cP | NEMA 17 25.9:1 |
Actual & Usable: 25cc each part |
Polypropylene | Ambient | 402099-50-DSD-Xt | Disposable Reservoirs Normal Torque 1:1, 2:1, 3:1 Blend Ratios |
SMH-2 | Two-part Mixtures | Up to 100,000 cP | Depends on feeding heads | Depends on feeding heads | Depends on feeding heads | Ambient | 402132-ALUM | *Fed by other heads Variable Blend Ratios | |
DMH-2 | Two-part Mixtures | Depends on feeding heads | Depends on feeding heads | Depends on feeding heads | Depends on feeding heads | Ambient | 400110-A | *Fed by other heads Variable Blend Ratios | |
EMO | Liquid, Gel, Paste | Up to 300,000 cP | NEMA 11 19:1, 27:1 |
Actual: 25cc Usable:~25cc |
Aluminum | Ambient | 402098-A | Reusable Reservoir Normal Torque | |
EMO-XT eXtra Torque |
Liquid, Gel, Paste, Clay | Up to 1,000,000 cP | NEMA 11 100:1 |
Actual: 15cc Usable:10cc |
Stainless | Ambient | 402098-XT | Reusable Reservoir High Torque | |
EMO-ST Super Torque |
Liquid, Gel, Paste, Clay | Up to 2,000,000 cP | NEMA 17 25.9:1 |
Actual: 30cc Usable:30cc |
Stainless | Ambient | 402184 | Reusable Reservoir High Torque | |
EMO-300XT eXtra Torque |
Liquid, Gel, Paste, Clay | Up to 1,000,000 cP | NEMA 11 100:1 |
Actual: 300cc Usable:300cc |
Stainless | Ambient | 402440 | Reusable Reservoir High Torque | |
VOL | Liquid, Gel, Paste | Up to 300,000 cP | NEMA 11 51:1 |
Actual: 25cc Usable:25cc |
Aluminum | Up to 90°C | 404041-A | Reusable Reservoir Normal Torque | |
KR2 | Hot Melt Adhesives, Thermoplastics | Up to 1,000,000 cP | NEMA 11 100:1 |
Actual: 15cc Usable:10cc |
Stainless | Up to 180°C | 404042-ALUM | Reusable Reservoir High Torque | |
KR2-ST Super Torque |
Hot Melt Adhesives, Thermoplastics | Up to 2,000,000 cP | NEMA 17 25.9:1 |
Actual: 30cc Usable:30cc |
Stainless | Up to 180°C | 402184-K | Reusable Reservoir High Torque | |
TAM | Hot Melt Adhesives, Thermoplastics | Up to 1,000,000 cP | NEMA 11 100:1 |
Actual: 15cc Usable:10cc |
Stainless | Up to 270°C | 404048-ALUM | Reusable Reservoir High Torque | |
TAM-ST | Hot Melt Adhesives, Thermoplastics | Up to 2,000,000 cP | NEMA 17 25.9:1 |
Actual: 15cc Usable:10cc |
Stainless | Up to 270°C | 404048-ST | Reusable Reservoir High Torque | |
UVP-365 nm | Photoinitiators | n/a | ~5 W | n/a | n/a | n/a | 402302-365 | Focusable | |
UVP-405 nm | Photoinitiators | n/a | ~5 W | n/a | n/a | n/a | 402302-405 | Focusable | |
UVP-450 nm | Photoinitiators | n/a | ~5 W | n/a | n/a | n/a | 402302-450 | Focusable | |
LA6-450 | Opaque | Laser | 6 W | n/a | n/a | n/a | 402108-A | 6 W, 450 nm, 0.25 mm ⌀ | |
ST1 | Waxes, Plastics LIGHT Drilling |
Spindle Tool | n/a | 12VDC, 4A, 40W | n/a | n/a | 402084-A | 5,000 (with no load) | |
ST3 | Plastics, Brass LIGHT Machining |
Spindle Tool | n/a | 48VDC, 8.3A, 400W | n/a | n/a | 402081-A | 12,000 (with no load) |
Note, for crosslinking heads, just see the standard heads and add the UV LED mechanism.
For details about Filament-based print heads, please visit our Filament_Heads page.
For details about Reservoir-based print heads, please visit our Reservoir_Heads page.
Nordson and ViscoTec Heads
Some customers have requested that we configure our equipment in such a way that heads from other companies like the Nordson Ultimus V heads or one of the Viscotec Vipro heads.Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all.
Click image for a larger image.